From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagdish Gediya Date: Mon, 3 Sep 2018 21:35:11 +0530 Subject: [U-Boot] [PATCH v3 7/8] powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards In-Reply-To: <1535990712-8359-1-git-send-email-jagdish.gediya@nxp.com> References: <1535990712-8359-1-git-send-email-jagdish.gediya@nxp.com> Message-ID: <1535990712-8359-8-git-send-email-jagdish.gediya@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Jagdish Gediya Reviewed-by: Bin Meng --- Changes for v2: - Remove mpc85xx-u-boot.dtsi - Update u-boot.dtsi to use CONFIG_MPC85XX_HAVE_RESET_VECTOR Changes for v3: - Use 'sort-by-offset' property instead of 'sort-by-pos' arch/powerpc/dts/u-boot.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 arch/powerpc/dts/u-boot.dtsi diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi new file mode 100644 index 0000000..213d543 --- /dev/null +++ b/arch/powerpc/dts/u-boot.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include + +/ { + binman { + filename = "u-boot-with-dtb.bin"; + skip-at-start = ; + sort-by-offset; + pad-byte = <0xff>; + size = ; + + u-boot-with-ucode-ptr { + offset = ; + optional-ucode; + }; + + u-boot-dtb-with-ucode { +#ifdef CONFIG_MPC85xx + align = <256>; +#endif + }; +#ifdef CONFIG_MPC85XX_HAVE_RESET_VECTOR + powerpc-mpc85xx-bootpg-resetvec { + offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>; + }; +#endif + }; +}; -- 2.7.4