All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Duszynski <tdu@semihalf.com>
To: dev@dpdk.org
Cc: nsamsono@marvell.com, mw@semihalf.com
Subject: [PATCH v2 10/12] net/mvpp2: align documentation with MUSDK 18.09
Date: Tue,  4 Sep 2018 15:49:11 +0200	[thread overview]
Message-ID: <1536068953-9352-11-git-send-email-tdu@semihalf.com> (raw)
In-Reply-To: <1536068953-9352-1-git-send-email-tdu@semihalf.com>

From: Natalie Samsonov <nsamsono@marvell.com>

Update documentation to align with MUSDK 18.09.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
---
 doc/guides/nics/mvpp2.rst | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/doc/guides/nics/mvpp2.rst b/doc/guides/nics/mvpp2.rst
index a452c8a..3b3f8c6 100644
--- a/doc/guides/nics/mvpp2.rst
+++ b/doc/guides/nics/mvpp2.rst
@@ -74,6 +74,7 @@ Features of the MVPP2 PMD are:
 - QoS
 - RX flow control
 - TX queue start/stop
+- Scattered TX frames
 
 
 Limitations
@@ -96,19 +97,19 @@ Prerequisites
 
   .. code-block:: console
 
-     git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.52-armada-17.10
+     git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.120-armada-18.09
 
 - Out of tree `mvpp2x_sysfs` kernel module sources
 
   .. code-block:: console
 
-     git clone https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell.git -b mvpp2x-armada-17.10
+     git clone https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell.git -b mvpp2x-armada-18.09
 
 - MUSDK (Marvell User-Space SDK) sources
 
   .. code-block:: console
 
-     git clone https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git -b musdk-armada-17.10
+     git clone https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git -b musdk-armada-18.09
 
   MUSDK is a light-weight library that provides direct access to Marvell's
   PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be
@@ -119,12 +120,6 @@ Prerequisites
   To get better understanding of the library one can consult documentation
   available in the ``doc`` top level directory of the MUSDK sources.
 
-  MUSDK must be configured with the following features:
-
-  .. code-block:: console
-
-     --enable-bpool-dma=64
-
 - DPDK environment
 
   Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
@@ -140,6 +135,9 @@ The following options can be modified in the ``config`` file.
 
     Toggle compilation of the librte mvpp2 driver.
 
+    .. Note::
+
+       When MVPP2 PMD is enabled ``CONFIG_RTE_LIBRTE_MVNETA_PMD`` must be disabled
 
 QoS Configuration
 -----------------
@@ -314,7 +312,7 @@ Driver needs precompiled MUSDK library during compilation.
 
    export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu-
    ./bootstrap
-   ./configure --host=aarch64-linux-gnu --enable-bpool-dma=64
+   ./configure --host=aarch64-linux-gnu
    make install
 
 MUSDK will be installed to `usr/local` under current directory.
@@ -328,7 +326,8 @@ the path to the MUSDK installation directory needs to be exported.
    export LIBMUSDK_PATH=<musdk>/usr/local
    export CROSS=aarch64-linux-gnu-
    make config T=arm64-armv8a-linuxapp-gcc
-   sed -ri 's,(MVPP2_PMD=)n,\1y,' build/.config
+   sed -i "s/MVNETA_PMD=y/MVNETA_PMD=n/" build/.config
+   sed -i "s/MVPP2_PMD=n/MVPP2_PMD=y/" build/.config
    make
 
 Flow API
@@ -500,15 +499,14 @@ Usage Example
 -------------
 
 MVPP2 PMD requires extra out of tree kernel modules to function properly.
-`musdk_uio` and `mv_pp_uio` sources are part of the MUSDK. Please consult
+`musdk_cma` sources are part of the MUSDK. Please consult
 ``doc/musdk_get_started.txt`` for the detailed build instructions.
 For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
 detailed build instructions.
 
 .. code-block:: console
 
-   insmod musdk_uio.ko
-   insmod mv_pp_uio.ko
+   insmod musdk_cma.ko
    insmod mvpp2x_sysfs.ko
 
 Additionally interfaces used by DPDK application need to be put up:
-- 
2.7.4

  parent reply	other threads:[~2018-09-04 13:49 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04  7:10 [PATCH 0/8] net/mvpp2: add new features Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 1/8] net/mvpp2: initialize ppio only once Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 2/8] net/mvpp2: move common code Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 3/8] net/mvpp2: add metering support Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 4/8] net/mvpp2: change default policer configuration Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 5/8] net/mvpp2: add init and deinit to flow Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 6/8] net/mvpp2: add traffic manager support Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 7/8] net/mvpp2: detach tx_qos from rx cls/qos config Tomasz Duszynski
2018-09-04  7:10 ` [PATCH 8/8] net/mvpp2: update MTU and MRU related calculations Tomasz Duszynski
2018-09-04 13:49 ` [PATCH v2 00/12] net/mvpp2: add new features Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 01/12] net/mvpp2: initialize ppio only once Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 02/12] net/mvpp2: move common code Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 03/12] net/mvpp2: add metering support Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 04/12] net/mvpp2: change default policer configuration Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 05/12] net/mvpp2: add init and deinit to flow Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 06/12] net/mvpp2: add traffic manager support Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 07/12] net/mvpp2: detach tx_qos from rx cls/qos config Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 08/12] net/mvpp2: update MTU and MRU related calculations Tomasz Duszynski
2018-09-04 13:49   ` [PATCH v2 09/12] net/mvpp2: align with MUSDK 18.09 Tomasz Duszynski
2018-09-04 13:49   ` Tomasz Duszynski [this message]
2018-09-19 17:15     ` [PATCH v2 10/12] net/mvpp2: align documentation " Ferruh Yigit
2018-09-23 22:40       ` Thomas Monjalon
2018-09-24 11:36         ` Ferruh Yigit
2018-09-24 11:51           ` Marcin Wojtas
2018-09-24 12:38             ` Ferruh Yigit
2018-09-24 12:44           ` Thomas Monjalon
2018-09-24 12:48             ` Marcin Wojtas
2018-09-24 12:50               ` Ferruh Yigit
2018-09-24 13:11                 ` Andrzej Ostruszka
2018-09-04 13:49   ` [PATCH v2 11/12] net/mvpp2: document MTR and TM usage Tomasz Duszynski
2018-09-23 22:45     ` Thomas Monjalon
2018-09-04 13:49   ` [PATCH v2 12/12] net/mvpp2: add Tx S/G support Tomasz Duszynski
2018-09-19 17:24   ` [PATCH v2 00/12] net/mvpp2: add new features Ferruh Yigit
2018-09-25  7:04   ` [PATCH v3 00/13] " Andrzej Ostruszka
2018-09-25  7:04     ` [PATCH v3 01/13] net/mvpp2: initialize ppio only once Andrzej Ostruszka
2018-09-25  7:04     ` [PATCH v3 02/13] net/mvpp2: move common code Andrzej Ostruszka
2018-09-25  7:04     ` [PATCH v3 03/13] net/mvpp2: add metering support Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 04/13] net/mvpp2: change default policer configuration Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 05/13] net/mvpp2: add init and deinit to flow Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 06/13] net/mvpp2: add traffic manager support Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 07/13] net/mvpp2: detach Tx QoS from Rx cls/QoS config Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 08/13] net/mvpp2: update MTU and MRU related calculations Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 09/13] net/mvpp2: align with MUSDK 18.09 Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 10/13] crypto/mvsam: get number of CIOs dynamically Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 11/13] net/mvpp2: align documentation with MUSDK 18.09 Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 12/13] net/mvpp2: document MTR and TM usage Andrzej Ostruszka
2018-09-25  7:05     ` [PATCH v3 13/13] net/mvpp2: add Tx scatter/gather support Andrzej Ostruszka
2018-09-25 16:12     ` [PATCH v3 00/13] net/mvpp2: add new features Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1536068953-9352-11-git-send-email-tdu@semihalf.com \
    --to=tdu@semihalf.com \
    --cc=dev@dpdk.org \
    --cc=mw@semihalf.com \
    --cc=nsamsono@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.