[PATCH 0/5] Add Du support to RZ/G1C and RZ/G1N

[PATCH 0/5] Add Du support to RZ/G1C and RZ/G1N

[Fabrizio Castro]

Dear All,

this series documents and adds driver support for the DUs found
inside RZ/G1C (a.k.a. R8A77470) and RZ/G1N (a.k.a. R8A7744).
Also, this series enables the SII902X driver as the SiI9022ACNU
HDMI transmitter is found on the iwg23s.

Thanks,
Fab

Biju Das (2):
  dt-bindings: display: renesas: du: Document the r8a7744 bindings
  drm: rcar-du: Add R8A7744 support

Fabrizio Castro (3):
  dt-bindings: display: renesas: du: Document the r8a77470 bindings
  drm: rcar-du: Add r8a77470 support
  ARM: shmobile: defconfig: Enable SII902X

 .../devicetree/bindings/display/renesas,du.txt     |  4 ++++
 arch/arm/configs/shmobile_defconfig                |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 27 ++++++++++++++++++++++
 3 files changed, 32 insertions(+)

-- 
2.7.4

[PATCH 0/5] Add Du support to RZ/G1C and RZ/G1N

[Fabrizio Castro]

Dear All,

this series documents and adds driver support for the DUs found
inside RZ/G1C (a.k.a. R8A77470) and RZ/G1N (a.k.a. R8A7744).
Also, this series enables the SII902X driver as the SiI9022ACNU
HDMI transmitter is found on the iwg23s.

Thanks,
Fab

Biju Das (2):
  dt-bindings: display: renesas: du: Document the r8a7744 bindings
  drm: rcar-du: Add R8A7744 support

Fabrizio Castro (3):
  dt-bindings: display: renesas: du: Document the r8a77470 bindings
  drm: rcar-du: Add r8a77470 support
  ARM: shmobile: defconfig: Enable SII902X

 .../devicetree/bindings/display/renesas,du.txt     |  4 ++++
 arch/arm/configs/shmobile_defconfig                |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 27 ++++++++++++++++++++++
 3 files changed, 32 insertions(+)

-- 
2.7.4

[PATCH 0/5] Add Du support to RZ/G1C and RZ/G1N

[Fabrizio Castro]

Dear All,

this series documents and adds driver support for the DUs found
inside RZ/G1C (a.k.a. R8A77470) and RZ/G1N (a.k.a. R8A7744).
Also, this series enables the SII902X driver as the SiI9022ACNU
HDMI transmitter is found on the iwg23s.

Thanks,
Fab

Biju Das (2):
  dt-bindings: display: renesas: du: Document the r8a7744 bindings
  drm: rcar-du: Add R8A7744 support

Fabrizio Castro (3):
  dt-bindings: display: renesas: du: Document the r8a77470 bindings
  drm: rcar-du: Add r8a77470 support
  ARM: shmobile: defconfig: Enable SII902X

 .../devicetree/bindings/display/renesas,du.txt     |  4 ++++
 arch/arm/configs/shmobile_defconfig                |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 27 ++++++++++++++++++++++
 3 files changed, 32 insertions(+)

-- 
2.7.4

[PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Fabrizio Castro]

Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index ec9d34be..2b28ae2 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -5,6 +5,7 @@ Required Properties:
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
+    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
+ R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
  R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
  R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
-- 
2.7.4

[PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Fabrizio Castro]

Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index ec9d34be..2b28ae2 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -5,6 +5,7 @@ Required Properties:
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
+    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
+ R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
  R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
  R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
-- 
2.7.4

[PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Fabrizio Castro]

Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index ec9d34be..2b28ae2 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -5,6 +5,7 @@ Required Properties:
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
+    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
+ R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
  R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
  R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
-- 
2.7.4

[PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 2b28ae2..aad9cf1 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -4,6 +4,7 @@ Required Properties:
 
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
+    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
     - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
                         Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
+ R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
  R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
-- 
2.7.4

[PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 2b28ae2..aad9cf1 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -4,6 +4,7 @@ Required Properties:
 
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
+    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
     - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
                         Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
+ R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
  R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
-- 
2.7.4

[PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 2b28ae2..aad9cf1 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -4,6 +4,7 @@ Required Properties:
 
   - compatible: must be one of the following.
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
+    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
     - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
                         Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
+ R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
  R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
-- 
2.7.4

[PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 02aee6c..c07d3f1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -77,6 +77,31 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 	},
 };
 
+static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77470 has two RGB outputs, one LVDS output, and
+		 * one analog video output (unsupported)
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 2,
+		},
+	},
+};
+
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 	.gen = 2,
 	.features = 0,
@@ -297,6 +322,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
+	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
 	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
 	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
-- 
2.7.4

[PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 02aee6c..c07d3f1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -77,6 +77,31 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 	},
 };
 
+static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77470 has two RGB outputs, one LVDS output, and
+		 * one analog video output (unsupported)
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 2,
+		},
+	},
+};
+
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 	.gen = 2,
 	.features = 0,
@@ -297,6 +322,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
+	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
 	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
 	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
-- 
2.7.4

[PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 02aee6c..c07d3f1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -77,6 +77,31 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 	},
 };
 
+static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77470 has two RGB outputs, one LVDS output, and
+		 * one analog video output (unsupported)
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 2,
+		},
+	},
+};
+
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 	.gen = 2,
 	.features = 0,
@@ -297,6 +322,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
+	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
 	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
 	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
-- 
2.7.4

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
it has 1 DPAD (RGB) output and 1 LVDS output.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index c07d3f1..2c3d0e5 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -321,6 +321,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
+	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
 	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
-- 
2.7.4

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
it has 1 DPAD (RGB) output and 1 LVDS output.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index c07d3f1..2c3d0e5 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -321,6 +321,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
+	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
 	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
-- 
2.7.4

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

From: Biju Das <biju.das@bp.renesas.com>

Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
it has 1 DPAD (RGB) output and 1 LVDS output.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index c07d3f1..2c3d0e5 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -321,6 +321,7 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = {
 
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
+	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
 	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
 	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
 	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
-- 
2.7.4

[PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Fabrizio Castro]

The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
this patch makes sure the corresponding driver gets built.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

Hello Simon,

a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks,
Fab

 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index d090022..9e5a5ad 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -142,6 +142,7 @@ CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SII902X=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_FB_SH_MOBILE_LCDC=y
-- 
2.7.4

[PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Fabrizio Castro]

The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
this patch makes sure the corresponding driver gets built.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

Hello Simon,

a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks,
Fab

 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index d090022..9e5a5ad 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -142,6 +142,7 @@ CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SII902X=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_FB_SH_MOBILE_LCDC=y
-- 
2.7.4

[PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Fabrizio Castro]

The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
this patch makes sure the corresponding driver gets built.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

Hello Simon,

a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks,
Fab

 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index d090022..9e5a5ad 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -142,6 +142,7 @@ CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SII902X=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_FB_SH_MOBILE_LCDC=y
-- 
2.7.4

Re: [PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> this patch makes sure the corresponding driver gets built.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> Hello Simon,
> 
> a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks Fabrizio,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> 
> Thanks,
> Fab
> 
>  arch/arm/configs/shmobile_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index d090022..9e5a5ad 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -142,6 +142,7 @@ CONFIG_DRM=y
>  CONFIG_DRM_RCAR_DU=y
>  CONFIG_DRM_RCAR_LVDS=y
>  CONFIG_DRM_DUMB_VGA_DAC=y
> +CONFIG_DRM_SII902X=y
>  CONFIG_DRM_I2C_ADV7511=y
>  CONFIG_DRM_I2C_ADV7511_AUDIO=y
>  CONFIG_FB_SH_MOBILE_LCDC=y
> -- 
> 2.7.4
> 

Re: [PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> this patch makes sure the corresponding driver gets built.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> Hello Simon,
> 
> a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks Fabrizio,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> 
> Thanks,
> Fab
> 
>  arch/arm/configs/shmobile_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index d090022..9e5a5ad 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -142,6 +142,7 @@ CONFIG_DRM=y
>  CONFIG_DRM_RCAR_DU=y
>  CONFIG_DRM_RCAR_LVDS=y
>  CONFIG_DRM_DUMB_VGA_DAC=y
> +CONFIG_DRM_SII902X=y
>  CONFIG_DRM_I2C_ADV7511=y
>  CONFIG_DRM_I2C_ADV7511_AUDIO=y
>  CONFIG_FB_SH_MOBILE_LCDC=y
> -- 
> 2.7.4
> 

[PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> this patch makes sure the corresponding driver gets built.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> Hello Simon,
> 
> a patch for the multi_v7_defconfig will be sent at a later stage.

Thanks Fabrizio,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> 
> Thanks,
> Fab
> 
>  arch/arm/configs/shmobile_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index d090022..9e5a5ad 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -142,6 +142,7 @@ CONFIG_DRM=y
>  CONFIG_DRM_RCAR_DU=y
>  CONFIG_DRM_RCAR_LVDS=y
>  CONFIG_DRM_DUMB_VGA_DAC=y
> +CONFIG_DRM_SII902X=y
>  CONFIG_DRM_I2C_ADV7511=y
>  CONFIG_DRM_I2C_ADV7511_AUDIO=y
>  CONFIG_FB_SH_MOBILE_LCDC=y
> -- 
> 2.7.4
> 

Re: [PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:27 +0100, Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:27 +0100, Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:27 +0100, Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:28 +0100, Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:28 +0100, Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Rob Herring]

On Fri, 21 Sep 2018 19:08:28 +0100, Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:27 EEST Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> ec9d34be..2b28ae2 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -5,6 +5,7 @@ Required Properties:
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
> +    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
>      - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
>      - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              - +
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
> R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
> R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:27 EEST Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> ec9d34be..2b28ae2 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -5,6 +5,7 @@ Required Properties:
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
> +    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
>      - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
>      - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              - +
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
> R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
> R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -

-- 
Regards,

Laurent Pinchart

[PATCH 1/5] dt-bindings: display: renesas: du: Document the r8a77470 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:27 EEST Fabrizio Castro wrote:
> Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> ec9d34be..2b28ae2 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -5,6 +5,7 @@ Required Properties:
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
> +    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
>      - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
>      - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              - +
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
> R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
> R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -

-- 
Regards,

Laurent Pinchart

Re: [PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:28 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> 2b28ae2..aad9cf1 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -4,6 +4,7 @@ Required Properties:
> 
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
> +    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
>      - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>                          Port0          Port1          Port2          Port3
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              - +
> R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -


-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:28 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> 2b28ae2..aad9cf1 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -4,6 +4,7 @@ Required Properties:
> 
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
> +    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
>      - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>                          Port0          Port1          Port2          Port3
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              - +
> R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -


-- 
Regards,

Laurent Pinchart

[PATCH 2/5] dt-bindings: display: renesas: du: Document the r8a7744 bindings

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:28 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt
> b/Documentation/devicetree/bindings/display/renesas,du.txt index
> 2b28ae2..aad9cf1 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -4,6 +4,7 @@ Required Properties:
> 
>    - compatible: must be one of the following.
>      - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
> +    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
>      - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
>      - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
>      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> @@ -51,6 +52,7 @@ corresponding to each DU output.
>                          Port0          Port1          Port2          Port3
>  ---------------------------------------------------------------------------
> -- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              - +
> R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
> R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
> R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
> R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -


-- 
Regards,

Laurent Pinchart

Re: [PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> rzg1_du_r8a7745_info = { },
>  };
> 
> +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> +	.gen = 2,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> +		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,

The DU driver has recently gained two new feature flags, 
RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both 
should be set here. Could you please confirm (and test) ?

> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/*
> +		 * R8A77470 has two RGB outputs, one LVDS output, and
> +		 * one analog video output (unsupported)

I'd write this "and one (currently unsupported) analog video output" to match 
the other device entries. With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +		 */
> +		[RCAR_DU_OUTPUT_DPAD0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_DPAD1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 1,
> +		},
> +		[RCAR_DU_OUTPUT_LVDS0] = {
> +			.possible_crtcs = BIT(0) | BIT(1),
> +			.port = 2,
> +		},
> +	},
> +};
> +
>  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
>  	.gen = 2,
>  	.features = 0,
> @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = { static const struct of_device_id
> rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> +	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>  	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
>  	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> rzg1_du_r8a7745_info = { },
>  };
> 
> +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> +	.gen = 2,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> +		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,

The DU driver has recently gained two new feature flags, 
RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both 
should be set here. Could you please confirm (and test) ?

> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/*
> +		 * R8A77470 has two RGB outputs, one LVDS output, and
> +		 * one analog video output (unsupported)

I'd write this "and one (currently unsupported) analog video output" to match 
the other device entries. With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +		 */
> +		[RCAR_DU_OUTPUT_DPAD0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_DPAD1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 1,
> +		},
> +		[RCAR_DU_OUTPUT_LVDS0] = {
> +			.possible_crtcs = BIT(0) | BIT(1),
> +			.port = 2,
> +		},
> +	},
> +};
> +
>  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
>  	.gen = 2,
>  	.features = 0,
> @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = { static const struct of_device_id
> rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> +	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>  	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
>  	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },

-- 
Regards,

Laurent Pinchart

[PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> rzg1_du_r8a7745_info = { },
>  };
> 
> +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> +	.gen = 2,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> +		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,

The DU driver has recently gained two new feature flags, 
RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both 
should be set here. Could you please confirm (and test) ?

> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/*
> +		 * R8A77470 has two RGB outputs, one LVDS output, and
> +		 * one analog video output (unsupported)

I'd write this "and one (currently unsupported) analog video output" to match 
the other device entries. With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +		 */
> +		[RCAR_DU_OUTPUT_DPAD0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_DPAD1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 1,
> +		},
> +		[RCAR_DU_OUTPUT_LVDS0] = {
> +			.possible_crtcs = BIT(0) | BIT(1),
> +			.port = 2,
> +		},
> +	},
> +};
> +
>  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
>  	.gen = 2,
>  	.features = 0,
> @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = { static const struct of_device_id
> rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> +	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>  	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
>  	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },

-- 
Regards,

Laurent Pinchart

Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch. 

On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> it has 1 DPAD (RGB) output and 1 LVDS output.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = {
> 
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> +	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
>  	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },

This looks good to me. I would also apply this change:

@@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info 
= {
        .channels_mask = BIT(1) | BIT(0),
        .routes = {
                /*
-                * R8A7743 has one RGB output and one LVDS output
+                * R8A774[34] has one RGB output and one LVDS output
                 */
                [RCAR_DU_OUTPUT_DPAD0] = {
                        .possible_crtcs = BIT(1) | BIT(0),

With this,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

There's no need to resubmit, I've applied the patch to my tree with the above 
change.

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch. 

On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> it has 1 DPAD (RGB) output and 1 LVDS output.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = {
> 
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> +	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
>  	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },

This looks good to me. I would also apply this change:

@@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info 
= {
        .channels_mask = BIT(1) | BIT(0),
        .routes = {
                /*
-                * R8A7743 has one RGB output and one LVDS output
+                * R8A774[34] has one RGB output and one LVDS output
                 */
                [RCAR_DU_OUTPUT_DPAD0] = {
                        .possible_crtcs = BIT(1) | BIT(0),

With this,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

There's no need to resubmit, I've applied the patch to my tree with the above 
change.

-- 
Regards,

Laurent Pinchart

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch. 

On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> From: Biju Das <biju.das@bp.renesas.com>
> 
> Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> it has 1 DPAD (RGB) output and 1 LVDS output.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = {
> 
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> +	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
>  	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
>  	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },

This looks good to me. I would also apply this change:

@@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info 
= {
        .channels_mask = BIT(1) | BIT(0),
        .routes = {
                /*
-                * R8A7743 has one RGB output and one LVDS output
+                * R8A774[34] has one RGB output and one LVDS output
                 */
                [RCAR_DU_OUTPUT_DPAD0] = {
                        .possible_crtcs = BIT(1) | BIT(0),

With this,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

There's no need to resubmit, I've applied the patch to my tree with the above 
change.

-- 
Regards,

Laurent Pinchart

RE: [PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Hello Laurent,

Thank you for your feedback.

> Subject: Re: [PATCH 3/5] drm: rcar-du: Add r8a77470 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> > Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7745_info = { },
> >  };
> >
> > +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> > +.gen = 2,
> > +.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> > +  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
>
> The DU driver has recently gained two new feature flags,
> RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both
> should be set here. Could you please confirm (and test) ?

I can confirm that both feature flags need to be set and all the test pass.
Will send a new version for this.

>
> > +.channels_mask = BIT(1) | BIT(0),
> > +.routes = {
> > +/*
> > + * R8A77470 has two RGB outputs, one LVDS output, and
> > + * one analog video output (unsupported)
>
> I'd write this "and one (currently unsupported) analog video output" to match
> the other device entries. With this fixed,

Will fix this as well.

Thanks,
Fab

>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > + */
> > +[RCAR_DU_OUTPUT_DPAD0] = {
> > +.possible_crtcs = BIT(0),
> > +.port = 0,
> > +},
> > +[RCAR_DU_OUTPUT_DPAD1] = {
> > +.possible_crtcs = BIT(1),
> > +.port = 1,
> > +},
> > +[RCAR_DU_OUTPUT_LVDS0] = {
> > +.possible_crtcs = BIT(0) | BIT(1),
> > +.port = 2,
> > +},
> > +},
> > +};
> > +
> >  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
> >  .gen = 2,
> >  .features = 0,
> > @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = { static const struct of_device_id
> > rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > +{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> >  { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
> >  { .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Hello Laurent,

Thank you for your feedback.

> Subject: Re: [PATCH 3/5] drm: rcar-du: Add r8a77470 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> > Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7745_info = { },
> >  };
> >
> > +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> > +.gen = 2,
> > +.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> > +  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
>
> The DU driver has recently gained two new feature flags,
> RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both
> should be set here. Could you please confirm (and test) ?

I can confirm that both feature flags need to be set and all the test pass.
Will send a new version for this.

>
> > +.channels_mask = BIT(1) | BIT(0),
> > +.routes = {
> > +/*
> > + * R8A77470 has two RGB outputs, one LVDS output, and
> > + * one analog video output (unsupported)
>
> I'd write this "and one (currently unsupported) analog video output" to match
> the other device entries. With this fixed,

Will fix this as well.

Thanks,
Fab

>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > + */
> > +[RCAR_DU_OUTPUT_DPAD0] = {
> > +.possible_crtcs = BIT(0),
> > +.port = 0,
> > +},
> > +[RCAR_DU_OUTPUT_DPAD1] = {
> > +.possible_crtcs = BIT(1),
> > +.port = 1,
> > +},
> > +[RCAR_DU_OUTPUT_LVDS0] = {
> > +.possible_crtcs = BIT(0) | BIT(1),
> > +.port = 2,
> > +},
> > +},
> > +};
> > +
> >  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
> >  .gen = 2,
> >  .features = 0,
> > @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = { static const struct of_device_id
> > rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > +{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> >  { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
> >  { .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

[PATCH 3/5] drm: rcar-du: Add r8a77470 support

[Fabrizio Castro]

Hello Laurent,

Thank you for your feedback.

> Subject: Re: [PATCH 3/5] drm: rcar-du: Add r8a77470 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:29 EEST Fabrizio Castro wrote:
> > Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 02aee6c..c07d3f1 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -77,6 +77,31 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7745_info = { },
> >  };
> >
> > +static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
> > +.gen = 2,
> > +.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> > +  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
>
> The DU driver has recently gained two new feature flags,
> RCAR_DU_FEATURE_INTERLACED and RCAR_DU_FEATURE_TVM_SYNC. I believe that both
> should be set here. Could you please confirm (and test) ?

I can confirm that both feature flags need to be set and all the test pass.
Will send a new version for this.

>
> > +.channels_mask = BIT(1) | BIT(0),
> > +.routes = {
> > +/*
> > + * R8A77470 has two RGB outputs, one LVDS output, and
> > + * one analog video output (unsupported)
>
> I'd write this "and one (currently unsupported) analog video output" to match
> the other device entries. With this fixed,

Will fix this as well.

Thanks,
Fab

>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > + */
> > +[RCAR_DU_OUTPUT_DPAD0] = {
> > +.possible_crtcs = BIT(0),
> > +.port = 0,
> > +},
> > +[RCAR_DU_OUTPUT_DPAD1] = {
> > +.possible_crtcs = BIT(1),
> > +.port = 1,
> > +},
> > +[RCAR_DU_OUTPUT_LVDS0] = {
> > +.possible_crtcs = BIT(0) | BIT(1),
> > +.port = 2,
> > +},
> > +},
> > +};
> > +
> >  static const struct rcar_du_device_info rcar_du_r8a7779_info = {
> >  .gen = 2,
> >  .features = 0,
> > @@ -297,6 +322,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = { static const struct of_device_id
> > rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > +{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> >  { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
> >  { .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Mon, Sep 24, 2018 at 11:08:51AM +0200, Simon Horman wrote:
> On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> > The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> > this patch makes sure the corresponding driver gets built.
> > 
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > 
> > Hello Simon,
> > 
> > a patch for the multi_v7_defconfig will be sent at a later stage.
> 
> Thanks Fabrizio,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Sorry for letting this slip.

I have applied it for v4.21.

Re: [PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Mon, Sep 24, 2018 at 11:08:51AM +0200, Simon Horman wrote:
> On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> > The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> > this patch makes sure the corresponding driver gets built.
> > 
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > 
> > Hello Simon,
> > 
> > a patch for the multi_v7_defconfig will be sent at a later stage.
> 
> Thanks Fabrizio,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Sorry for letting this slip.

I have applied it for v4.21.

[PATCH 5/5] ARM: shmobile: defconfig: Enable SII902X

[Simon Horman]

On Mon, Sep 24, 2018 at 11:08:51AM +0200, Simon Horman wrote:
> On Fri, Sep 21, 2018 at 07:08:31PM +0100, Fabrizio Castro wrote:
> > The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
> > this patch makes sure the corresponding driver gets built.
> > 
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > 
> > Hello Simon,
> > 
> > a patch for the multi_v7_defconfig will be sent at a later stage.
> 
> Thanks Fabrizio,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Sorry for letting this slip.

I have applied it for v4.21.

RE: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Hello Laurent,

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 15 October 2018 23:25
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > From: Biju Das <biju.das@bp.renesas.com>
> >
> > Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> > it has 1 DPAD (RGB) output and 1 LVDS output.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = {
> >
> >  static const struct of_device_id rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>
> This looks good to me. I would also apply this change:
>
> @@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info
> = {
>         .channels_mask = BIT(1) | BIT(0),
>         .routes = {
>                 /*
> -                * R8A7743 has one RGB output and one LVDS output
> +                * R8A774[34] has one RGB output and one LVDS output
>                  */
>                 [RCAR_DU_OUTPUT_DPAD0] = {
>                         .possible_crtcs = BIT(1) | BIT(0),
>
> With this,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> There's no need to resubmit, I've applied the patch to my tree with the above
> change.

I was expecting to see this patch at least on linux-next by now but it looks like it's not in there, could you please double check what happened to it?

Thanks,
Fab

>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Hello Laurent,

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 15 October 2018 23:25
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > From: Biju Das <biju.das@bp.renesas.com>
> >
> > Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> > it has 1 DPAD (RGB) output and 1 LVDS output.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = {
> >
> >  static const struct of_device_id rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>
> This looks good to me. I would also apply this change:
>
> @@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info
> = {
>         .channels_mask = BIT(1) | BIT(0),
>         .routes = {
>                 /*
> -                * R8A7743 has one RGB output and one LVDS output
> +                * R8A774[34] has one RGB output and one LVDS output
>                  */
>                 [RCAR_DU_OUTPUT_DPAD0] = {
>                         .possible_crtcs = BIT(1) | BIT(0),
>
> With this,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> There's no need to resubmit, I've applied the patch to my tree with the above
> change.

I was expecting to see this patch at least on linux-next by now but it looks like it's not in there, could you please double check what happened to it?

Thanks,
Fab

>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Hello Laurent,

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 15 October 2018 23:25
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > From: Biju Das <biju.das@bp.renesas.com>
> >
> > Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
> > it has 1 DPAD (RGB) output and 1 LVDS output.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a77970_info = {
> >
> >  static const struct of_device_id rcar_du_of_table[] = {
> >  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
> >  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
>
> This looks good to me. I would also apply this change:
>
> @@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info
> = {
>         .channels_mask = BIT(1) | BIT(0),
>         .routes = {
>                 /*
> -                * R8A7743 has one RGB output and one LVDS output
> +                * R8A774[34] has one RGB output and one LVDS output
>                  */
>                 [RCAR_DU_OUTPUT_DPAD0] = {
>                         .possible_crtcs = BIT(1) | BIT(0),
>
> With this,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> There's no need to resubmit, I've applied the patch to my tree with the above
> change.

I was expecting to see this patch at least on linux-next by now but it looks like it's not in there, could you please double check what happened to it?

Thanks,
Fab

>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> On 15 October 2018 23:25 Laurent Pinchart wrote:
> > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> >> From: Biju Das <biju.das@bp.renesas.com>
> >> 
> >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> >> DU);
> >> it has 1 DPAD (RGB) output and 1 LVDS output.
> >> 
> >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> >> ---
> >> 
> >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >>  1 file changed, 1 insertion(+)
> >> 
> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> >> rcar_du_r8a77970_info = {
> >>  static const struct of_device_id rcar_du_of_table[] = {
> >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> >>  },
> >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > 
> > This looks good to me. I would also apply this change:
> > 
> > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7743_info = {
> >         .channels_mask = BIT(1) | BIT(0),
> >         .routes = {
> >                 /*
> > -                * R8A7743 has one RGB output and one LVDS output
> > +                * R8A774[34] has one RGB output and one LVDS output
> >                  */
> >                 [RCAR_DU_OUTPUT_DPAD0] = {
> >                         .possible_crtcs = BIT(1) | BIT(0),
> > 
> > With this,
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > 
> > There's no need to resubmit, I've applied the patch to my tree with the
> > above change.
> 
> I was expecting to see this patch at least on linux-next by now but it looks
> like it's not in there, could you please double check what happened to it?

I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
next in the near future.

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> On 15 October 2018 23:25 Laurent Pinchart wrote:
> > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> >> From: Biju Das <biju.das@bp.renesas.com>
> >> 
> >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> >> DU);
> >> it has 1 DPAD (RGB) output and 1 LVDS output.
> >> 
> >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> >> ---
> >> 
> >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >>  1 file changed, 1 insertion(+)
> >> 
> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> >> rcar_du_r8a77970_info = {
> >>  static const struct of_device_id rcar_du_of_table[] = {
> >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> >>  },
> >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > 
> > This looks good to me. I would also apply this change:
> > 
> > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7743_info = {
> >         .channels_mask = BIT(1) | BIT(0),
> >         .routes = {
> >                 /*
> > -                * R8A7743 has one RGB output and one LVDS output
> > +                * R8A774[34] has one RGB output and one LVDS output
> >                  */
> >                 [RCAR_DU_OUTPUT_DPAD0] = {
> >                         .possible_crtcs = BIT(1) | BIT(0),
> > 
> > With this,
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > 
> > There's no need to resubmit, I've applied the patch to my tree with the
> > above change.
> 
> I was expecting to see this patch at least on linux-next by now but it looks
> like it's not in there, could you please double check what happened to it?

I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
next in the near future.

-- 
Regards,

Laurent Pinchart

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Laurent Pinchart]

Hi Fabrizio,

On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> On 15 October 2018 23:25 Laurent Pinchart wrote:
> > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> >> From: Biju Das <biju.das@bp.renesas.com>
> >> 
> >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> >> DU);
> >> it has 1 DPAD (RGB) output and 1 LVDS output.
> >> 
> >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> >> ---
> >> 
> >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> >>  1 file changed, 1 insertion(+)
> >> 
> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> >> rcar_du_r8a77970_info = {
> >>  static const struct of_device_id rcar_du_of_table[] = {
> >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> >>  },
> >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > 
> > This looks good to me. I would also apply this change:
> > 
> > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > rzg1_du_r8a7743_info = {
> >         .channels_mask = BIT(1) | BIT(0),
> >         .routes = {
> >                 /*
> > -                * R8A7743 has one RGB output and one LVDS output
> > +                * R8A774[34] has one RGB output and one LVDS output
> >                  */
> >                 [RCAR_DU_OUTPUT_DPAD0] = {
> >                         .possible_crtcs = BIT(1) | BIT(0),
> > 
> > With this,
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > 
> > There's no need to resubmit, I've applied the patch to my tree with the
> > above change.
> 
> I was expecting to see this patch at least on linux-next by now but it looks
> like it's not in there, could you please double check what happened to it?

I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
next in the near future.

-- 
Regards,

Laurent Pinchart

RE: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Thank you Laurent.

Cheers,
Fab

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 23 November 2018 12:05
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> > On 15 October 2018 23:25 Laurent Pinchart wrote:
> > > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > >> From: Biju Das <biju.das@bp.renesas.com>
> > >>
> > >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> > >> DU);
> > >> it has 1 DPAD (RGB) output and 1 LVDS output.
> > >>
> > >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > >> ---
> > >>
> > >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> > >>  1 file changed, 1 insertion(+)
> > >>
> > >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > >> rcar_du_r8a77970_info = {
> > >>  static const struct of_device_id rcar_du_of_table[] = {
> > >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> > >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> > >>  },
> > >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > >
> > > This looks good to me. I would also apply this change:
> > >
> > > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > > rzg1_du_r8a7743_info = {
> > >         .channels_mask = BIT(1) | BIT(0),
> > >         .routes = {
> > >                 /*
> > > -                * R8A7743 has one RGB output and one LVDS output
> > > +                * R8A774[34] has one RGB output and one LVDS output
> > >                  */
> > >                 [RCAR_DU_OUTPUT_DPAD0] = {
> > >                         .possible_crtcs = BIT(1) | BIT(0),
> > >
> > > With this,
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >
> > > There's no need to resubmit, I've applied the patch to my tree with the
> > > above change.
> >
> > I was expecting to see this patch at least on linux-next by now but it looks
> > like it's not in there, could you please double check what happened to it?
>
> I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
> next in the near future.
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Thank you Laurent.

Cheers,
Fab

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 23 November 2018 12:05
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> > On 15 October 2018 23:25 Laurent Pinchart wrote:
> > > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > >> From: Biju Das <biju.das@bp.renesas.com>
> > >>
> > >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> > >> DU);
> > >> it has 1 DPAD (RGB) output and 1 LVDS output.
> > >>
> > >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > >> ---
> > >>
> > >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> > >>  1 file changed, 1 insertion(+)
> > >>
> > >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > >> rcar_du_r8a77970_info = {
> > >>  static const struct of_device_id rcar_du_of_table[] = {
> > >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> > >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> > >>  },
> > >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > >
> > > This looks good to me. I would also apply this change:
> > >
> > > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > > rzg1_du_r8a7743_info = {
> > >         .channels_mask = BIT(1) | BIT(0),
> > >         .routes = {
> > >                 /*
> > > -                * R8A7743 has one RGB output and one LVDS output
> > > +                * R8A774[34] has one RGB output and one LVDS output
> > >                  */
> > >                 [RCAR_DU_OUTPUT_DPAD0] = {
> > >                         .possible_crtcs = BIT(1) | BIT(0),
> > >
> > > With this,
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >
> > > There's no need to resubmit, I've applied the patch to my tree with the
> > > above change.
> >
> > I was expecting to see this patch at least on linux-next by now but it looks
> > like it's not in there, could you please double check what happened to it?
>
> I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
> next in the near future.
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

[PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Fabrizio Castro]

Thank you Laurent.

Cheers,
Fab

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 23 November 2018 12:05
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> > On 15 October 2018 23:25 Laurent Pinchart wrote:
> > > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > >> From: Biju Das <biju.das@bp.renesas.com>
> > >>
> > >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> > >> DU);
> > >> it has 1 DPAD (RGB) output and 1 LVDS output.
> > >>
> > >> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > >> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > >> ---
> > >>
> > >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> > >>  1 file changed, 1 insertion(+)
> > >>
> > >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > >> rcar_du_r8a77970_info = {
> > >>  static const struct of_device_id rcar_du_of_table[] = {
> > >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> > >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> > >>  },
> > >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > >
> > > This looks good to me. I would also apply this change:
> > >
> > > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > > rzg1_du_r8a7743_info = {
> > >         .channels_mask = BIT(1) | BIT(0),
> > >         .routes = {
> > >                 /*
> > > -                * R8A7743 has one RGB output and one LVDS output
> > > +                * R8A774[34] has one RGB output and one LVDS output
> > >                  */
> > >                 [RCAR_DU_OUTPUT_DPAD0] = {
> > >                         .possible_crtcs = BIT(1) | BIT(0),
> > >
> > > With this,
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >
> > > There's no need to resubmit, I've applied the patch to my tree with the
> > > above change.
> >
> > I was expecting to see this patch at least on linux-next by now but it looks
> > like it's not in there, could you please double check what happened to it?
>
> I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
> next in the near future.
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.