From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.8 required=3.0 tests=DKIMWL_WL_MED,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id DA78EECE561 for ; Fri, 28 Sep 2018 17:27:14 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7479A20676 for ; Fri, 28 Sep 2018 17:27:14 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=xilinx.onmicrosoft.com header.i=@xilinx.onmicrosoft.com header.b="J5Q++be1" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7479A20676 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=xilinx.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729543AbeI1Xv6 (ORCPT ); Fri, 28 Sep 2018 19:51:58 -0400 Received: from mail-co1nam03on0088.outbound.protection.outlook.com ([104.47.40.88]:37731 "EHLO NAM03-CO1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726473AbeI1Xv6 (ORCPT ); Fri, 28 Sep 2018 19:51:58 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector1-xilinx-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=1ld5stwiHFLewRgI0HigfvRRdwXEV5FabE1awTA9MGc=; b=J5Q++be1F7sbsptsU6Fk7i3kY9LRqHplurQHCx8NlpiX7dMOomkA4RJz+YAPJxO7cUEqR1PuOVqDIEw2G2Zk+yy8zS+2CBRkdCTu07hXrLQBTtF4XUmw0MxdT+qXlWrGE3/uaHKKdUzpkxvy+uG/LIo/Z9jm+h/ORgLrJ5KSvvM= Received: from SN4PR0201CA0002.namprd02.prod.outlook.com (2603:10b6:803:2b::12) by BN7PR02MB5108.namprd02.prod.outlook.com (2603:10b6:408:22::21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.1143.18; Fri, 28 Sep 2018 17:13:38 +0000 Received: from CY1NAM02FT026.eop-nam02.prod.protection.outlook.com (2a01:111:f400:7e45::206) by SN4PR0201CA0002.outlook.office365.com (2603:10b6:803:2b::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.1185.23 via Frontend Transport; Fri, 28 Sep 2018 17:13:38 +0000 Authentication-Results: spf=pass (sender IP is 149.199.60.100) smtp.mailfrom=xilinx.com; vger.kernel.org; dkim=none (message not signed) header.d=none;vger.kernel.org; dmarc=bestguesspass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.60.100 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.60.100; helo=xsj-pvapsmtpgw02; Received: from xsj-pvapsmtpgw02 (149.199.60.100) by CY1NAM02FT026.mail.protection.outlook.com (10.152.75.157) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.20.1185.13 via Frontend Transport; Fri, 28 Sep 2018 17:13:37 +0000 Received: from unknown-38-66.xilinx.com ([149.199.38.66]:40601 helo=xsj-pvapsmtp01) by xsj-pvapsmtpgw02 with esmtp (Exim 4.63) (envelope-from ) id 1g5wKf-0002Lt-5H; Fri, 28 Sep 2018 10:13:37 -0700 Received: from [127.0.0.1] (helo=localhost) by xsj-pvapsmtp01 with smtp (Exim 4.63) (envelope-from ) id 1g5wKa-0004HW-2N; Fri, 28 Sep 2018 10:13:32 -0700 Received: from xsj-pvapsmtp01 (xsj-smtp1.xilinx.com [149.199.38.66]) by xsj-smtp-dlp1.xlnx.xilinx.com (8.13.8/8.13.1) with ESMTP id w8SHDT7a019276; Fri, 28 Sep 2018 10:13:29 -0700 Received: from [172.19.2.91] (helo=xsjjollys50.xilinx.com) by xsj-pvapsmtp01 with esmtp (Exim 4.63) (envelope-from ) id 1g5wKX-0004H1-2R; Fri, 28 Sep 2018 10:13:29 -0700 From: Jolly Shah To: , , , , , CC: , , , Jolly Shah , Rajan Vaja , Tejas Patel , Shubhrajyoti Datta , Jolly Shah Subject: [PATCH v4 4/4] drivers: clk: Add ZynqMP clock driver Date: Fri, 28 Sep 2018 10:13:18 -0700 Message-ID: <1538154798-6828-5-git-send-email-jollys@xilinx.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1538154798-6828-1-git-send-email-jollys@xilinx.com> References: <1538154798-6828-1-git-send-email-jollys@xilinx.com> X-RCIS-Action: ALLOW X-TM-AS-Product-Ver: IMSS-7.1.0.1224-8.2.0.1013-23620.005 X-TM-AS-User-Approved-Sender: Yes;Yes X-EOPAttributedMessage: 0 X-MS-Office365-Filtering-HT: Tenant X-Forefront-Antispam-Report: CIP:149.199.60.100;IPV:NLI;CTRY:US;EFV:NLI;SFV:NSPM;SFS:(10009020)(376002)(346002)(39860400002)(396003)(136003)(2980300002)(438002)(199004)(189003)(476003)(8676002)(48376002)(11346002)(63266004)(575784001)(106466001)(316002)(336012)(53946003)(54906003)(126002)(16586007)(110136005)(50466002)(50226002)(44832011)(36386004)(106002)(14444005)(5660300001)(76176011)(446003)(26005)(72206003)(4326008)(486006)(305945005)(36756003)(77096007)(478600001)(356003)(2201001)(107886003)(34290500001)(2616005)(47776003)(186003)(8936002)(9786002)(426003)(2906002)(81156014)(81166006)(7696005)(6666003)(51416003)(107986001)(5001870100001)(579004)(309714004);DIR:OUT;SFP:1101;SCL:1;SRVR:BN7PR02MB5108;H:xsj-pvapsmtpgw02;FPR:;SPF:Pass;LANG:en;PTR:unknown-60-100.xilinx.com,xapps1.xilinx.com;A:1;MX:1; X-Microsoft-Exchange-Diagnostics: 1;CY1NAM02FT026;1:R92R5bzipTvHK06WrSunpk4/sLzcueq58v74LYFJi3rowukCOD5CdwQLw5osqio7EAhSx+lMquCSaxMsIoXA6od64iKZMtlwKPtbtP4sfHPE6lygMBuOC5C68tqceLde MIME-Version: 1.0 Content-Type: text/plain X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: ecfbf587-d380-4abb-5d50-08d62565bb2f X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:(7020095)(4652040)(8989299)(4534165)(4627221)(201703031133081)(201702281549075)(8990200)(5600074)(711020)(4608076)(2017052603328)(7153060);SRVR:BN7PR02MB5108; X-Microsoft-Exchange-Diagnostics: 1;BN7PR02MB5108;3:bykJygBD0IceE4JUm4ecaTlW5eLbj7wDYHELFgGgSmYtkZ6n9W5v6MamH8iuA4PB2zxXdH8fYVFMUTAwOT6q52kcUe/zgngc63vNE+Zvmy8lZUGEnj4GUy5gvcaWwChj764ERFagGGzYNemPwgiUaCXKH/EfzEUbZoXJh83eXDMM0s9mKxETmcHwgzr6KEdrr6Kr7ALUOCuTnX7sUeab1D3j/jKmbgiPCZldlaaQewQfUiuh93FAdFY+qodl7FkqKA6eAFnlDUSfYyKa6kPF/VIYoaHRNGwW519CREx43hAAHn3QuLNFi3hkr83vbUhV2NJXbWQyYhic9b7rvHS6k0tshu60plhiCZLwyIAxv7U=;25:wljUOA+7sBl1DfUZGIv2O4Px2cC3/jQQqk52glzZyWsWbnuvny4+0Q2x/DaY+SfjgQ1UkeGXlsUVlFlyFrF6lhHOhAp7Y4Ek+f+xzlP6DJYr4RNOSMCb2yylRZFX1Z0B/g/F3Zrv5SGLZ8wjpL7W9GgDM/yXChJhBwuzSPbmc5YrmtNh6TQf1vjnsg+F5J6SvyQ/1R+YluPP3ahGE04YIleEwJrW3Mlewb7C7jElxBep262EiyCRZynz8dn6jfNWnNB9g6CeOq0COnXaVfx8oVlsRMkX4wz0ManDdx+hXvtZS1jWgj1M+TtRsZzjZLbSN+KRm2dWb4ZNin3IRfN11g== X-MS-TrafficTypeDiagnostic: BN7PR02MB5108: X-Microsoft-Exchange-Diagnostics: 1;BN7PR02MB5108;31:QRDwstz/wgGzeG+rgo/lsyRWc+3pb7GItLajBPb+Jd0gowX67WBG9FAsqtS5mJRXFxb3YoLIqZ1O6qei2okmWlgPvFFBNn1N4uue1VintodIm9q8BZK+vE+IY937TT78lkjZC+wzhu98eNyh++liSV0DhpLtV9AJlnoSvuZx99dzK178IdUn1O92gOEzdxoj8fqQZUXK/ICuftYqlmO7lEiqUZC3kZ4irc4UOQ8tx74=;20: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 X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-Microsoft-Antispam-PRVS: X-Exchange-Antispam-Report-Test: UriScan:(192813158149592); X-MS-Exchange-SenderADCheck: 1 X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:(8211001083)(6040522)(2401047)(8121501046)(5005006)(3231355)(944501410)(52105095)(3002001)(10201501046)(93006095)(93004095)(6055026)(149066)(150057)(6041310)(20161123558120)(20161123564045)(20161123562045)(20161123560045)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(201708071742011)(7699051);SRVR:BN7PR02MB5108;BCL:0;PCL:0;RULEID:;SRVR:BN7PR02MB5108; X-Microsoft-Exchange-Diagnostics: 1;BN7PR02MB5108;4:MfD1aRF1Tgg+aLK45dIyOBVaSlNV6Rdh35zYX3NHk+51/8Ivn8aJX0cpLJrSjPSZiQT2dvF1PHWvJebfi9tPLR+HHpLl07VTdCEeX3sVdrl6GTddGoXC1rtBFVbUdpbmF/nvQ2j976FMwiR/qKnXrdtUOcUesScujh7qmqw9VEVyvY+3FXSLiplh0kmeDctg1AlgWUYmcquaIfctwIjXkp0qfuDq6e8xKof6KTWFJ5WZ5mI5rogrJmCFKLwqvzXnLlECSpffUyjPnOIwJTVZKHkp1EcpikO9wWcfDOVOS7KsWUqwefSs/U++Ii2Diltm X-Forefront-PRVS: 0809C12563 X-Microsoft-Exchange-Diagnostics: =?us-ascii?Q?1;BN7PR02MB5108;23:+csLe6YLxF7NFrbzyyVdvRDd2VrFJ1+GeCa4bxnhf?= =?us-ascii?Q?zfMaW8O7IdGsI/4k0SBoFrU9w+g1HEVf1IKFsrFv2m3y6bQo6w5y/B6o+/Ce?= =?us-ascii?Q?9pMD+IUrENPHNTjBKmxyOC4nInWUDvrQ0JwlaDp9IRQTX2UtplPiSyvtXK4g?= =?us-ascii?Q?gdQTisgd1oMmde5GSKXZ3uyV24UHsCEhSiQLdZErwFYi1ZOXKeSljDXDk4Sf?= =?us-ascii?Q?w0jI+98gUFoWsDPM4mleK3cp76rYHsIhMih/+FMxiKlfun/RdG7FvbB/VHNp?= =?us-ascii?Q?VIKg2HXeeXeikbWvQQAN6UA8JfdbkuEOQICG3O5cS97BhY8ihsk6T2nhfnBB?= =?us-ascii?Q?/vhfx8egoBmAgOJxVcL2bhEXXnGI8lHQofqTGW+BSFY5YRS0jx6mqlVLZdYE?= =?us-ascii?Q?Ng+LsICHiWlLDNi/0aqySGg4MJg8+eHTo1RiPfiOhll/HFWofHPzPuGvA99e?= =?us-ascii?Q?8HLdpFMmkJA9Ns6Z0QIUT9SiOabLOBYyZz+SgVAvBFH+JJylZFVQ6nziaate?= =?us-ascii?Q?Aro05MhzGHw8BdKXnB0QNa0YJtkRipNysY13QpvaXEqDe/Ax/F8mt7cXyCX5?= =?us-ascii?Q?fPdMH6Y8n7RTmIZUTFap9jVc+ox5rJPlmRFBeeG/51p0qlKbnoj57VNeWFeL?= =?us-ascii?Q?eyipeMGgnJQA1ygXZtTxo7MprOQG2wpH+OigHw6+FVO0yYZTCELuOLWGZG0f?= =?us-ascii?Q?i/PjalvmBS0e4/vdE11+IENXdHUtuuhU5d0SvPNSNOvIgTmY5mqP9Sc3ykfs?= =?us-ascii?Q?xUFWEm7lCaBsmT8p44yC+LpZkQH/lzSkrxSpAhfKg2KoxNWPG116E2Fhuerz?= =?us-ascii?Q?vTGZORH9UPu/cX8pZhxD96wdXzTcEfBnPM4Bsun1q7Sxy3yVtm6fweIayCsG?= =?us-ascii?Q?Ul7t3izNrlj+4qdBz8foHnOqUnqzKnPTuUGJTFyHMV0JIdbQhj4D3idFrOtJ?= =?us-ascii?Q?R6BnkmSnB1Q71faBko7c7QuthDFV6+9R4CLcAK71loc5xCk0KM+NZ3qOntnm?= =?us-ascii?Q?QJJWATbQAjZ6r29q21dJ9chg2YgpQtCxoJdh+Qbo5fSSeBdz+KAK4ogv/yqq?= =?us-ascii?Q?4GsBccdNXgi8BWvsphtmvXq+QnqDKNEQf7+htzNNRI+a99C4DaTYZLSXpoLb?= =?us-ascii?Q?Px5Loo0IVvoEYTVF1rOw8AI2QDJIf0oKV61HnM9vfM1DpgWRsL4Lc0U76k4v?= =?us-ascii?Q?Q4nXeZznsmDJtDZSos/fj00w6056CyDwTq0EyCG0Kugg2N+yOZcplDP4sJnU?= =?us-ascii?Q?mbregCvK34sJ9t3vTY1OL93cA8GjGhKwLCQiJONjm/u/j5sxoVPnPGHwk76J?= =?us-ascii?Q?I6nVREnO5REqrPqnvFP1Xd0xW9xXMLOLym/CGWhHSgQ?= X-Microsoft-Antispam-Message-Info: OgzVwDiQdYE1ywfvme5OcdsCtfBIWmOaaOGuTOPMxm3QGbqMtRpNsivhvd1BxWprbW9KXjAW58YBrtaNPnMg35vi8XGfzUeHCGuAk0yakFks3u8g+rc1MuNJWL8Lzqo+zmzdJidFiJl3GmQL9Pi8OOV8GTs1xxe6tuRAqSPqlYiyk2V1xCynilZxo5nrVEdrEDLpvaZ4H5NXK3WTDtN1aM6s7ndOn9hmV305TUj3BDSKSwv+EN77rC3YjyYaFSwVQE8xScUJlZtqOWbXud30tWwz0vb3S42i8F8H9TOHUtDqVyKGZWCNphRoJQRr3mkXyO68/5ktV+LFL6StzH0yshH6eDwHklRmLv1UrqPs3nc= X-Microsoft-Exchange-Diagnostics: 1;BN7PR02MB5108;6:49mgTwJAPHqGKKWfM9z/r502jHc5aV+9mPPmNqSerX/OWMxMV193zjYIBXBujZhrsQC2gEPkPo/KR6ZoRfeiJyJ+onJ4JQynvS/ULE2F0NscvewrI4L35tBpsvzNKIa7YTR5BTGW5eMvTi6xZhQDjXgw/SJNfGPw93LYaXsL2mx9jGaZvSnqlzuD8o+iVG34xxmgJj8NjQyc4TZPN0lF44jZCaJlAKxFQzKogto5/7qp0s0Lp6FSvazkrmjpGAUJMechskpQaJvx3r9pyaPGjJ9apMcuydUVMUJAwNV3jUTNKIPLc0cEmLoxq1pYdE36h6mU6qD+SiSQvhGfTVAmsut3G4qD8qWXnWEpMzbThhBaT6MBHbcZoMao2LWcXK6Kg+bSIgMrfTKOqjMNHHQaYS3n6b0g4DVdSKTFC+ZbuA4an/i1sixEBnXb1VEBzOdoL3esjZBh9IZIFGK+4ITW6w==;5:KlrGgYWiZ5iIFMxo7LfHYrXik70F3DcgyFNV1KFaISlObch4qVcKPHRd8Evwasj4m18Y0CXd9YRZf3Sui0vu1whkcQqI5Gsjm2LCM0fxP82sqj5Jrunoq/WWZ/f0jm1A9x2AKU5BDzvmXy6f9hrunEZYXEFREPy7PUn6mi/9+dc=;7:nrUh8d2W8R/eI3HEoRBkZsata30uhogojBlctMPecP7e0VMIzf79mtCztCb7I9naWF/YhnGDp+VGAlr0GJSW6OiXNsgcfYGvcWDoEBaLfXI+cnF3hq1mXeHiT+HAuvpkNDCJ8PYfTabRgcNgZYuK7h2c5sQ49uhBJF/b63ltlg+mcoUMf2VJELpR8SWYYi2Z+0zS/79k3IEvT72pDF+1n7EO3rdosXPxoEwReo8haTjgFgq/J5NR4FW9rIPczIZ0 SpamDiagnosticOutput: 1:99 SpamDiagnosticMetadata: NSPM X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 28 Sep 2018 17:13:37.6246 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: ecfbf587-d380-4abb-5d50-08d62565bb2f X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.100];Helo=[xsj-pvapsmtpgw02] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN7PR02MB5108 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Jolly Shah This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja Signed-off-by: Tejas Patel Signed-off-by: Shubhrajyoti Datta Signed-off-by: Jolly Shah --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/zynqmp/Kconfig | 10 + drivers/clk/zynqmp/Makefile | 4 + drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++++ drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 +++++++ drivers/clk/zynqmp/clk-zynqmp.h | 68 ++++ drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++++++++++++++++ drivers/clk/zynqmp/divider.c | 217 +++++++++++ drivers/clk/zynqmp/pll.c | 335 ++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 1 + 11 files changed, 1638 insertions(+) create mode 100644 drivers/clk/zynqmp/Kconfig create mode 100644 drivers/clk/zynqmp/Makefile create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h create mode 100644 drivers/clk/zynqmp/clkc.c create mode 100644 drivers/clk/zynqmp/divider.c create mode 100644 drivers/clk/zynqmp/pll.c diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 98ce9fc..ab2ea76 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -253,5 +253,6 @@ source "drivers/clk/sunxi-ng/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/ti/Kconfig" source "drivers/clk/uniphier/Kconfig" +source "drivers/clk/zynqmp/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71ec41e..b6ac0d2 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -100,3 +100,4 @@ obj-$(CONFIG_X86) += x86/ endif obj-$(CONFIG_ARCH_ZX) += zte/ obj-$(CONFIG_ARCH_ZYNQ) += zynq/ +obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/ diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig new file mode 100644 index 0000000..1708605 --- /dev/null +++ b/drivers/clk/zynqmp/Kconfig @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +config COMMON_CLK_ZYNQMP + bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers" + depends on ARCH_ZYNQMP || COMPILE_TEST + depends on ZYNQMP_FIRMWARE + help + Support for the Zynqmp Ultrascale clock controller. + It has a dependency on the PMU firmware. + Say Y if you want to include clock support. diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile new file mode 100644 index 0000000..0ec24bf --- /dev/null +++ b/drivers/clk/zynqmp/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +# Zynq Ultrascale+ MPSoC clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c new file mode 100644 index 0000000..83b236f --- /dev/null +++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2018 Xilinx + * + * Gated clock implementation + */ + +#include +#include +#include "clk-zynqmp.h" + +/** + * struct clk_gate - gating clock + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_gate { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw) + +/** + * zynqmp_clk_gate_enable() - Enable clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: 0 on success else error code + */ +static int zynqmp_clk_gate_enable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_enable(clk_id); + + if (ret) + pr_warn_once("%s() clock enabled failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +/* + * zynqmp_clk_gate_disable() - Disable clock + * @hw: handle between common and hardware-specific interfaces + */ +static void zynqmp_clk_gate_disable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_disable(clk_id); + + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_clk_gate_is_enable() - Check clock state + * @hw: handle between common and hardware-specific interfaces + * + * Return: 1 if enabled, 0 if disabled else error code + */ +static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int state, ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) { + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + return -EIO; + } + + return state ? 1 : 0; +} + +static const struct clk_ops zynqmp_clk_gate_ops = { + .enable = zynqmp_clk_gate_enable, + .disable = zynqmp_clk_gate_disable, + .is_enabled = zynqmp_clk_gate_is_enabled, +}; + +/** + * zynqmp_clk_register_gate() - Register a gate clock with the clock framework + * @name: Name of this clock + * @clk_id: Id of this clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware of the registered clock gate + */ +struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_gate *gate; + struct clk_hw *hw; + int ret; + struct clk_init_data init; + + /* allocate the gate */ + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_gate_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + /* struct clk_gate assignments */ + gate->flags = nodes->type_flag; + gate->hw.init = &init; + gate->clk_id = clk_id; + + hw = &gate->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(gate); + hw = ERR_PTR(ret); + } + + return hw; +} diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c new file mode 100644 index 0000000..4143f56 --- /dev/null +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC mux + * + * Copyright (C) 2016-2018 Xilinx + */ + +#include +#include +#include "clk-zynqmp.h" + +/* + * DOC: basic adjustable multiplexer clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is only affected by parent switching. No clk_set_rate support + * parent - parent is adjustable through clk_set_parent + */ + +/** + * struct zynqmp_clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_mux { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw) + +/** + * zynqmp_clk_mux_get_parent() - Get parent of clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: Parent index + */ +static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + u32 val; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getparent(clk_id, &val); + + if (ret) + pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + return val; +} + +/** + * zynqmp_clk_mux_set_parent() - Set parent of clock + * @hw: handle between common and hardware-specific interfaces + * @index: Parent index + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_setparent(clk_id, index); + + if (ret) + pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +static const struct clk_ops zynqmp_clk_mux_ops = { + .get_parent = zynqmp_clk_mux_get_parent, + .set_parent = zynqmp_clk_mux_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +static const struct clk_ops zynqmp_clk_mux_ro_ops = { + .get_parent = zynqmp_clk_mux_get_parent, +}; + +/** + * zynqmp_clk_register_mux() - Register a mux table with the clock + * framework + * @name: Name of this clock + * @clk_id: Id of this clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware of the registered clock mux + */ +struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_mux *mux; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + init.name = name; + if (nodes->type_flag & CLK_MUX_READ_ONLY) + init.ops = &zynqmp_clk_mux_ro_ops; + else + init.ops = &zynqmp_clk_mux_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = num_parents; + mux->flags = nodes->type_flag; + mux->hw.init = &init; + mux->clk_id = clk_id; + + hw = &mux->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + hw = ERR_PTR(ret); + } + + return hw; +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux); diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h new file mode 100644 index 0000000..7ab163b --- /dev/null +++ b/drivers/clk/zynqmp/clk-zynqmp.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016-2018 Xilinx + */ + +#ifndef __LINUX_CLK_ZYNQMP_H_ +#define __LINUX_CLK_ZYNQMP_H_ + +#include + +#include + +/* Clock APIs payload parameters */ +#define CLK_GET_NAME_RESP_LEN 16 +#define CLK_GET_TOPOLOGY_RESP_WORDS 3 +#define CLK_GET_PARENTS_RESP_WORDS 3 +#define CLK_GET_ATTR_RESP_WORDS 1 + +enum topology_type { + TYPE_INVALID, + TYPE_MUX, + TYPE_PLL, + TYPE_FIXEDFACTOR, + TYPE_DIV1, + TYPE_DIV2, + TYPE_GATE, +}; + +/** + * struct clock_topology - Clock topology + * @type: Type of topology + * @flag: Topology flags + * @type_flag: Topology type specific flag + */ +struct clock_topology { + u32 type; + u32 flag; + u32 type_flag; +}; + +struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_divider(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +#endif diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c new file mode 100644 index 0000000..1b07d77 --- /dev/null +++ b/drivers/clk/zynqmp/clkc.c @@ -0,0 +1,716 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2018 Xilinx + * + * Based on drivers/clk/zynq/clkc.c + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "clk-zynqmp.h" + +#define MAX_PARENT 100 +#define MAX_NODES 6 +#define MAX_NAME_LEN 50 + +#define CLK_TYPE_SHIFT 2 + +#define PM_API_PAYLOAD_LEN 3 + +#define NA_PARENT 0xFFFFFFFF +#define DUMMY_PARENT 0xFFFFFFFE + +#define CLK_TYPE_FIELD_LEN 4 +#define CLK_TOPOLOGY_NODE_OFFSET 16 +#define NODES_PER_RESP 3 + +#define CLK_TYPE_FIELD_MASK 0xF +#define CLK_FLAG_FIELD_MASK GENMASK(21, 8) +#define CLK_TYPE_FLAG_FIELD_MASK GENMASK(31, 24) + +#define CLK_PARENTS_ID_LEN 16 +#define CLK_PARENTS_ID_MASK 0xFFFF + +/* Flags for parents */ +#define PARENT_CLK_SELF 0 +#define PARENT_CLK_NODE1 1 +#define PARENT_CLK_NODE2 2 +#define PARENT_CLK_NODE3 3 +#define PARENT_CLK_NODE4 4 +#define PARENT_CLK_EXTERNAL 5 + +#define END_OF_CLK_NAME "END_OF_CLK" +#define END_OF_TOPOLOGY_NODE 1 +#define END_OF_PARENTS 1 +#define RESERVED_CLK_NAME "" + +#define CLK_VALID_MASK 0x1 + +enum clk_type { + CLK_TYPE_OUTPUT, + CLK_TYPE_EXTERNAL, +}; + +/** + * struct clock_parent - Clock parent + * @name: Parent name + * @id: Parent clock ID + * @flag: Parent flags + */ +struct clock_parent { + char name[MAX_NAME_LEN]; + int id; + u32 flag; +}; + +/** + * struct zynqmp_clock - Clock + * @clk_name: Clock name + * @valid: Validity flag of clock + * @type: Clock type (Output/External) + * @node: Clock topology nodes + * @num_nodes: Number of nodes present in topology + * @parent: Parent of clock + * @num_parents: Number of parents of clock + */ +struct zynqmp_clock { + char clk_name[MAX_NAME_LEN]; + u32 valid; + enum clk_type type; + struct clock_topology node[MAX_NODES]; + u32 num_nodes; + struct clock_parent parent[MAX_PARENT]; + u32 num_parents; +}; + +static const char clk_type_postfix[][10] = { + [TYPE_INVALID] = "", + [TYPE_MUX] = "_mux", + [TYPE_GATE] = "", + [TYPE_DIV1] = "_div1", + [TYPE_DIV2] = "_div2", + [TYPE_FIXEDFACTOR] = "_ff", + [TYPE_PLL] = "" +}; + +static struct clk_hw *(* const clk_topology[]) (const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) + = { + [TYPE_INVALID] = NULL, + [TYPE_MUX] = zynqmp_clk_register_mux, + [TYPE_PLL] = zynqmp_clk_register_pll, + [TYPE_FIXEDFACTOR] = zynqmp_clk_register_fixed_factor, + [TYPE_DIV1] = zynqmp_clk_register_divider, + [TYPE_DIV2] = zynqmp_clk_register_divider, + [TYPE_GATE] = zynqmp_clk_register_gate +}; + +static struct zynqmp_clock *clock; +static struct clk_hw_onecell_data *zynqmp_data; +static unsigned int clock_max_idx; +static const struct zynqmp_eemi_ops *eemi_ops; + +/** + * zynqmp_is_valid_clock() - Check whether clock is valid or not + * @clk_id: Clock index + * + * Return: 1 if clock is valid, 0 if clock is invalid else error code + */ +static inline int zynqmp_is_valid_clock(u32 clk_id) +{ + if (clk_id > clock_max_idx) + return -ENODEV; + + return clock[clk_id].valid; +} + +/** + * zynqmp_get_clock_name() - Get name of clock from Clock index + * @clk_id: Clock index + * @clk_name: Name of clock + * + * Return: 0 on success else error code + */ +static int zynqmp_get_clock_name(u32 clk_id, char *clk_name) +{ + int ret; + + ret = zynqmp_is_valid_clock(clk_id); + if (ret == 1) { + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN); + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +/** + * zynqmp_get_clock_type() - Get type of clock + * @clk_id: Clock index + * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL + * + * Return: 0 on success else error code + */ +static int zynqmp_get_clock_type(u32 clk_id, u32 *type) +{ + int ret; + + ret = zynqmp_is_valid_clock(clk_id); + if (ret == 1) { + *type = clock[clk_id].type; + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +/** + * zynqmp_pm_clock_get_num_clocks() - Get number of clocks in system + * @nclocks: Number of clocks in system/board. + * + * Call firmware API to get number of clocks. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pm_clock_get_num_clocks(u32 *nclocks) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_NUM_CLOCKS; + + ret = eemi_ops->query_data(qdata, ret_payload); + *nclocks = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pm_clock_get_name() - Get the name of clock for given id + * @clock_id: ID of the clock to be queried + * @name: Name of given clock + * + * This function is used to get name of clock specified by given + * clock ID. + * + * Return: Returns 0, in case of error name would be 0 + */ +static int zynqmp_pm_clock_get_name(u32 clock_id, char *name) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_NAME; + qdata.arg1 = clock_id; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN); + + return 0; +} + +/** + * zynqmp_pm_clock_get_topology() - Get the topology of clock for given id + * @clock_id: ID of the clock to be queried + * @index: Node index of clock topology + * @topology: Buffer to store nodes in topology and flags + * + * This function is used to get topology information for the clock + * specified by given clock ID. + * + * This API will return 3 node of topology with a single response. To get + * other nodes, master should call same API in loop with new + * index till error is returned. E.g First call should have + * index 0 which will return nodes 0,1 and 2. Next call, index + * should be 3 which will return nodes 3,4 and 5 and so on. + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4); + + return ret; +} + +/** + * zynqmp_clk_register_fixed_factor() - Register fixed factor with the + * clock framework + * @name: Name of this clock + * @clk_id: Clock ID + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to the registered clock + */ +struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + u32 mult, div; + struct clk_hw *hw; + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS; + qdata.arg1 = clk_id; + + ret = eemi_ops->query_data(qdata, ret_payload); + mult = ret_payload[1]; + div = ret_payload[2]; + + hw = clk_hw_register_fixed_factor(NULL, name, + parents[0], + nodes->flag, mult, + div); + + return hw; +} + +/** + * zynqmp_pm_clock_get_parents() - Get the first 3 parents of clock for given id + * @clock_id: Clock ID + * @index: Parent index + * @parents: 3 parents of the given clock + * + * This function is used to get 3 parents for the clock specified by + * given clock ID. + * + * This API will return 3 parents with a single response. To get + * other parents, master should call same API in loop with new + * parent index till error is returned. E.g First call should have + * index 0 which will return parents 0,1 and 2. Next call, index + * should be 3 which will return parent 3,4 and 5 and so on. + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_PARENTS; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4); + + return ret; +} + +/** + * zynqmp_pm_clock_get_attributes() - Get the attributes of clock for given id + * @clock_id: Clock ID + * @attr: Clock attributes + * + * This function is used to get clock's attributes(e.g. valid, clock type, etc). + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES; + qdata.arg1 = clock_id; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4); + + return ret; +} + +/** + * __zynqmp_clock_get_topology() - Get topology data of clock from firmware + * response data + * @topology: Clock topology + * @data: Clock topology data received from firmware + * @nnodes: Number of nodes + * + * Return: 0 on success else error+reason + */ +static int __zynqmp_clock_get_topology(struct clock_topology *topology, + u32 *data, u32 *nnodes) +{ + int i; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (!(data[i] & CLK_TYPE_FIELD_MASK)) + return END_OF_TOPOLOGY_NODE; + topology[*nnodes].type = data[i] & CLK_TYPE_FIELD_MASK; + topology[*nnodes].flag = FIELD_GET(CLK_FLAG_FIELD_MASK, + data[i]); + topology[*nnodes].type_flag = + FIELD_GET(CLK_TYPE_FLAG_FIELD_MASK, data[i]); + (*nnodes)++; + } + + return 0; +} + +/** + * zynqmp_clock_get_topology() - Get topology of clock from firmware using + * PM_API + * @clk_id: Clock index + * @topology: Clock topology + * @num_nodes: Number of nodes + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clock_get_topology(u32 clk_id, + struct clock_topology *topology, + u32 *num_nodes) +{ + int j, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_nodes = 0; + for (j = 0; j <= MAX_NODES; j += 3) { + ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp); + if (ret) + return ret; + ret = __zynqmp_clock_get_topology(topology, pm_resp, num_nodes); + if (ret == END_OF_TOPOLOGY_NODE) + return 0; + } + + return 0; +} + +/** + * __zynqmp_clock_get_topology() - Get parents info of clock from firmware + * response data + * @parents: Clock parents + * @data: Clock parents data received from firmware + * @nparent: Number of parent + * + * Return: 0 on success else error+reason + */ +static int __zynqmp_clock_get_parents(struct clock_parent *parents, u32 *data, + u32 *nparent) +{ + int i; + struct clock_parent *parent; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (data[i] == NA_PARENT) + return END_OF_PARENTS; + + parent = &parents[i]; + parent->id = data[i] & CLK_PARENTS_ID_MASK; + if (data[i] == DUMMY_PARENT) { + strcpy(parent->name, "dummy_name"); + parent->flag = 0; + } else { + parent->flag = data[i] >> CLK_PARENTS_ID_LEN; + if (zynqmp_get_clock_name(parent->id, parent->name)) + continue; + } + *nparent += 1; + } + + return 0; +} + +/** + * zynqmp_clock_get_parents() - Get parents info from firmware using PM_API + * @clk_id: Clock index + * @parents: Clock parents + * @num_parents: Total number of parents + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clock_get_parents(u32 clk_id, struct clock_parent *parents, + u32 *num_parents) +{ + int j = 0, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_parents = 0; + do { + /* Get parents from firmware */ + ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp); + if (ret) + return ret; + + ret = __zynqmp_clock_get_parents(&parents[j], pm_resp, + num_parents); + if (ret == END_OF_PARENTS) + return 0; + j += PM_API_PAYLOAD_LEN; + } while (*num_parents <= MAX_PARENT); + + return 0; +} + +/** + * zynqmp_get_parent_list() - Create list of parents name + * @np: Device node + * @clk_id: Clock index + * @parent_list: List of parent's name + * @num_parents: Total number of parents + * + * Return: 0 on success else error+reason + */ +static int zynqmp_get_parent_list(struct device_node *np, u32 clk_id, + const char **parent_list, u32 *num_parents) +{ + int i = 0, ret; + u32 total_parents = clock[clk_id].num_parents; + struct clock_topology *clk_nodes; + struct clock_parent *parents; + + clk_nodes = clock[clk_id].node; + parents = clock[clk_id].parent; + + for (i = 0; i < total_parents; i++) { + if (!parents[i].flag) { + parent_list[i] = parents[i].name; + } else if (parents[i].flag == PARENT_CLK_EXTERNAL) { + ret = of_property_match_string(np, "clock-names", + parents[i].name); + if (ret < 0) + strcpy(parents[i].name, "dummy_name"); + parent_list[i] = parents[i].name; + } else { + strcat(parents[i].name, + clk_type_postfix[clk_nodes[parents[i].flag - 1]. + type]); + parent_list[i] = parents[i].name; + } + } + + *num_parents = total_parents; + return 0; +} + +/** + * zynqmp_register_clk_topology() - Register clock topology + * @clk_id: Clock index + * @clk_name: Clock Name + * @num_parents: Total number of parents + * @parent_names: List of parents name + * + * Return: Returns either clock hardware or error+reason + */ +static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, + int num_parents, + const char **parent_names) +{ + int j; + u32 num_nodes; + char *clk_out = NULL; + struct clock_topology *nodes; + struct clk_hw *hw = NULL; + + nodes = clock[clk_id].node; + num_nodes = clock[clk_id].num_nodes; + + for (j = 0; j < num_nodes; j++) { + /* + * Clock name received from firmware is output clock name. + * Intermediate clock names are postfixed with type of clock. + */ + if (j != (num_nodes - 1)) { + clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name, + clk_type_postfix[nodes[j].type]); + } else { + clk_out = kasprintf(GFP_KERNEL, "%s", clk_name); + } + + if (!clk_topology[nodes[j].type]) + continue; + + hw = (*clk_topology[nodes[j].type])(clk_out, clk_id, + parent_names, + num_parents, + &nodes[j]); + if (IS_ERR(hw)) + pr_warn_once("%s() %s register fail with %ld\n", + __func__, clk_name, PTR_ERR(hw)); + + parent_names[0] = clk_out; + } + kfree(clk_out); + return hw; +} + +/** + * zynqmp_register_clocks() - Register clocks + * @np: Device node + * + * Return: 0 on success else error code + */ +static int zynqmp_register_clocks(struct device_node *np) +{ + int ret; + u32 i, total_parents = 0, type = 0; + const char *parent_names[MAX_PARENT]; + + for (i = 0; i < clock_max_idx; i++) { + char clk_name[MAX_NAME_LEN]; + + /* get clock name, continue to next clock if name not found */ + if (zynqmp_get_clock_name(i, clk_name)) + continue; + + /* Check if clock is valid and output clock. + * Do not register invalid or external clock. + */ + ret = zynqmp_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + /* Get parents of clock*/ + if (zynqmp_get_parent_list(np, i, parent_names, + &total_parents)) { + WARN_ONCE(1, "No parents found for %s\n", + clock[i].clk_name); + continue; + } + + zynqmp_data->hws[i] = + zynqmp_register_clk_topology(i, clk_name, + total_parents, + parent_names); + } + + for (i = 0; i < clock_max_idx; i++) { + if (IS_ERR(zynqmp_data->hws[i])) { + pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n", + clock[i].clk_name, PTR_ERR(zynqmp_data->hws[i])); + WARN_ON(1); + } + } + return 0; +} + +/** + * zynqmp_get_clock_info() - Get clock information from firmware using PM_API + */ +static void zynqmp_get_clock_info(void) +{ + int i, ret; + u32 attr, type = 0; + + for (i = 0; i < clock_max_idx; i++) { + zynqmp_pm_clock_get_name(i, clock[i].clk_name); + if (!strcmp(clock[i].clk_name, RESERVED_CLK_NAME)) + continue; + + ret = zynqmp_pm_clock_get_attributes(i, &attr); + if (ret) + continue; + + clock[i].valid = attr & CLK_VALID_MASK; + clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL : + CLK_TYPE_OUTPUT; + } + + /* Get topology of all clock */ + for (i = 0; i < clock_max_idx; i++) { + ret = zynqmp_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + ret = zynqmp_clock_get_topology(i, clock[i].node, + &clock[i].num_nodes); + if (ret) + continue; + + ret = zynqmp_clock_get_parents(i, clock[i].parent, + &clock[i].num_parents); + if (ret) + continue; + } +} + +/** + * zynqmp_clk_setup() - Setup the clock framework and register clocks + * @np: Device node + * + * Return: 0 on success else error code + */ +static int zynqmp_clk_setup(struct device_node *np) +{ + int ret; + + ret = zynqmp_pm_clock_get_num_clocks(&clock_max_idx); + if (ret) + return ret; + + zynqmp_data = kzalloc(sizeof(*zynqmp_data) + sizeof(*zynqmp_data) * + clock_max_idx, GFP_KERNEL); + if (!zynqmp_data) + return -ENOMEM; + + clock = kcalloc(clock_max_idx, sizeof(*clock), GFP_KERNEL); + if (!clock) { + kfree(zynqmp_data); + return -ENOMEM; + } + + zynqmp_get_clock_info(); + zynqmp_register_clocks(np); + + zynqmp_data->num = clock_max_idx; + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, zynqmp_data); + + return 0; +} + +static int zynqmp_clock_probe(struct platform_device *pdev) +{ + int ret; + struct device *dev = &pdev->dev; + + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (!eemi_ops) + return -ENXIO; + + ret = zynqmp_clk_setup(dev->of_node); + + return ret; +} + +static const struct of_device_id zynqmp_clock_of_match[] = { + {.compatible = "xlnx,zynqmp-clk"}, + {}, +}; +MODULE_DEVICE_TABLE(of, zynqmp_clock_of_match); + +static struct platform_driver zynqmp_clock_driver = { + .driver = { + .name = "zynqmp_clock", + .of_match_table = zynqmp_clock_of_match, + }, + .probe = zynqmp_clock_probe, +}; +module_platform_driver(zynqmp_clock_driver); diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c new file mode 100644 index 0000000..a371c66 --- /dev/null +++ b/drivers/clk/zynqmp/divider.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC Divider support + * + * Copyright (C) 2016-2018 Xilinx + * + * Adjustable divider clock implementation + */ + +#include +#include +#include +#include "clk-zynqmp.h" + +/* + * DOC: basic adjustable divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor) + * parent - fixed parent. No clk_set_parent support + */ + +#define to_zynqmp_clk_divider(_hw) \ + container_of(_hw, struct zynqmp_clk_divider, hw) + +#define CLK_FRAC BIT(13) /* has a fractional parent */ + +/** + * struct zynqmp_clk_divider - adjustable divider clock + * @hw: handle between common and hardware-specific interfaces + * @flags: Hardware specific flags + * @clk_id: Id of clock + * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2) + */ +struct zynqmp_clk_divider { + struct clk_hw hw; + u8 flags; + u32 clk_id; + u32 div_type; +}; + +static inline int zynqmp_divider_get_val(unsigned long parent_rate, + unsigned long rate) +{ + return DIV_ROUND_CLOSEST(parent_rate, rate); +} + +/** + * zynqmp_clk_divider_recalc_rate() - Recalc rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @parent_rate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 div, value; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getdivider(clk_id, &div); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + if (div_type == TYPE_DIV1) + value = div & 0xFFFF; + else + value = div >> 16; + + return DIV_ROUND_UP_ULL(parent_rate, value); +} + +/** + * zynqmp_clk_divider_round_rate() - Round rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @rate: rate of clock to be set + * @prate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *prate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 bestdiv; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + /* if read only, just return current value */ + if (divider->flags & CLK_DIVIDER_READ_ONLY) { + ret = eemi_ops->clock_getdivider(clk_id, &bestdiv); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + if (div_type == TYPE_DIV1) + bestdiv = bestdiv & 0xFFFF; + else + bestdiv = bestdiv >> 16; + + return DIV_ROUND_UP_ULL((u64)*prate, bestdiv); + } + + bestdiv = zynqmp_divider_get_val(*prate, rate); + + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && + (divider->flags & CLK_FRAC)) + bestdiv = rate % *prate ? 1 : bestdiv; + *prate = rate * bestdiv; + + return rate; +} + +/** + * zynqmp_clk_divider_set_rate() - Set rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @rate: rate of clock to be set + * @parent_rate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 value, div; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + value = zynqmp_divider_get_val(parent_rate, rate); + if (div_type == TYPE_DIV1) { + div = value & 0xFFFF; + div |= 0xffff << 16; + } else { + div = 0xffff; + div |= value << 16; + } + + ret = eemi_ops->clock_setdivider(clk_id, div); + + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +static const struct clk_ops zynqmp_clk_divider_ops = { + .recalc_rate = zynqmp_clk_divider_recalc_rate, + .round_rate = zynqmp_clk_divider_round_rate, + .set_rate = zynqmp_clk_divider_set_rate, +}; + +/** + * zynqmp_clk_register_divider() - Register a divider clock + * @name: Name of this clock + * @clk_id: Id of clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to registered clock divider + */ +struct clk_hw *zynqmp_clk_register_divider(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_divider *div; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + /* allocate the divider */ + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_divider_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + /* struct clk_divider assignments */ + div->flags = nodes->type_flag; + div->hw.init = &init; + div->clk_id = clk_id; + div->div_type = nodes->type; + + hw = &div->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(div); + hw = ERR_PTR(ret); + } + + return hw; +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider); diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c new file mode 100644 index 0000000..626bb5f --- /dev/null +++ b/drivers/clk/zynqmp/pll.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC PLL driver + * + * Copyright (C) 2016-2018 Xilinx + */ + +#include +#include +#include +#include "clk-zynqmp.h" + +/** + * struct zynqmp_pll - PLL clock + * @hw: Handle between common and hardware-specific interfaces + * @clk_id: PLL clock ID + */ +struct zynqmp_pll { + struct clk_hw hw; + u32 clk_id; +}; + +#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw) + +#define PLL_FBDIV_MIN 25 +#define PLL_FBDIV_MAX 125 + +#define PS_PLL_VCO_MIN 1500000000 +#define PS_PLL_VCO_MAX 3000000000UL + +enum pll_mode { + PLL_MODE_INT, + PLL_MODE_FRAC, +}; + +#define FRAC_OFFSET 0x8 +#define PLLFCFG_FRAC_EN BIT(31) +#define FRAC_DIV BIT(16) /* 2^16 */ + +/** + * zynqmp_pll_get_mode() - Get mode of PLL + * @hw: Handle between common and hardware-specific interfaces + * + * Return: Mode of PLL + */ +static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0, + ret_payload); + if (ret) + pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret_payload[1]; +} + +/** + * zynqmp_pll_set_mode() - Set the PLL mode + * @hw: Handle between common and hardware-specific interfaces + * @on: Flag to determine the mode + */ +static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + int ret; + u32 mode; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (on) + mode = PLL_MODE_FRAC; + else + mode = PLL_MODE_INT; + + ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL); + if (ret) + pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_pll_round_rate() - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * + * Return: Frequency closest to @rate the hardware can generate + */ +static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + long rate_div, f; + + /* Enable the fractional mode if needed */ + rate_div = (rate * FRAC_DIV) / *prate; + f = rate_div % FRAC_DIV; + zynqmp_pll_set_mode(hw, !!f); + + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + if (rate > PS_PLL_VCO_MAX) { + fbdiv = rate / PS_PLL_VCO_MAX; + rate = rate / (fbdiv + 1); + } + if (rate < PS_PLL_VCO_MIN) { + fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); + rate = rate * fbdiv; + } + return rate; + } + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + return *prate * fbdiv; +} + +/** + * zynqmp_pll_recalc_rate() - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * + * Return: Current clock frequency + */ +static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv, data; + unsigned long rate, frac; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getdivider(clk_id, &fbdiv); + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + rate = parent_rate * fbdiv; + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0, + ret_payload); + data = ret_payload[1]; + frac = (parent_rate * data) / FRAC_DIV; + rate = rate + frac; + } + + return rate; +} + +/** + * zynqmp_pll_set_rate() - Set rate of PLL + * @hw: Handle between common and hardware-specific interfaces + * @rate: Frequency of clock to be set + * @parent_rate: Clock frequency of parent clock + * + * Set PLL divider to set desired rate. + * + * Returns: rate which is set on success else error code + */ +static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv; + long rate_div, frac, m, f; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + rate_div = (rate * FRAC_DIV) / parent_rate; + m = rate_div / FRAC_DIV; + f = rate_div % FRAC_DIV; + m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX)); + rate = parent_rate * m; + frac = (parent_rate * f) / FRAC_DIV; + + ret = eemi_ops->clock_setdivider(clk_id, m); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL); + + return rate + frac; + } + + fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + ret = eemi_ops->clock_setdivider(clk_id, fbdiv); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return parent_rate * fbdiv; +} + +/** + * zynqmp_pll_is_enabled() - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 1 if the clock is enabled, 0 otherwise + */ +static int zynqmp_pll_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + unsigned int state; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) { + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + return -EIO; + } + + return state ? 1 : 0; +} + +/** + * zynqmp_pll_enable() - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 0 on success else error code + */ +static int zynqmp_pll_enable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (zynqmp_pll_is_enabled(hw)) + return 0; + + ret = eemi_ops->clock_enable(clk_id); + if (ret) + pr_warn_once("%s() clock enable failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +/** + * zynqmp_pll_disable() - Disable clock + * @hw: Handle between common and hardware-specific interfaces + */ +static void zynqmp_pll_disable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!zynqmp_pll_is_enabled(hw)) + return; + + ret = eemi_ops->clock_disable(clk_id); + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +static const struct clk_ops zynqmp_pll_ops = { + .enable = zynqmp_pll_enable, + .disable = zynqmp_pll_disable, + .is_enabled = zynqmp_pll_is_enabled, + .round_rate = zynqmp_pll_round_rate, + .recalc_rate = zynqmp_pll_recalc_rate, + .set_rate = zynqmp_pll_set_rate, +}; + +/** + * zynqmp_clk_register_pll() - Register PLL with the clock framework + * @name: PLL name + * @clk_id: Clock ID + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to the registered clock + */ +struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_pll *pll; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + init.name = name; + init.ops = &zynqmp_pll_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + pll->hw.init = &init; + pll->clk_id = clk_id; + + hw = &pll->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(pll); + return ERR_PTR(ret); + } + + clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX); + if (ret < 0) + pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret); + + return hw; +} diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 7a9db08..3c3c28e 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -72,6 +72,7 @@ enum pm_query_id { PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS, PM_QID_CLOCK_GET_PARENTS, PM_QID_CLOCK_GET_ATTRIBUTES, + PM_QID_CLOCK_GET_NUM_CLOCKS = 12, }; /** -- 2.7.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: jolly.shah@xilinx.com (Jolly Shah) Date: Fri, 28 Sep 2018 10:13:18 -0700 Subject: [PATCH v4 4/4] drivers: clk: Add ZynqMP clock driver In-Reply-To: <1538154798-6828-1-git-send-email-jollys@xilinx.com> References: <1538154798-6828-1-git-send-email-jollys@xilinx.com> Message-ID: <1538154798-6828-5-git-send-email-jollys@xilinx.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Jolly Shah This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja Signed-off-by: Tejas Patel Signed-off-by: Shubhrajyoti Datta Signed-off-by: Jolly Shah --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/zynqmp/Kconfig | 10 + drivers/clk/zynqmp/Makefile | 4 + drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++++ drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 +++++++ drivers/clk/zynqmp/clk-zynqmp.h | 68 ++++ drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++++++++++++++++ drivers/clk/zynqmp/divider.c | 217 +++++++++++ drivers/clk/zynqmp/pll.c | 335 ++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 1 + 11 files changed, 1638 insertions(+) create mode 100644 drivers/clk/zynqmp/Kconfig create mode 100644 drivers/clk/zynqmp/Makefile create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h create mode 100644 drivers/clk/zynqmp/clkc.c create mode 100644 drivers/clk/zynqmp/divider.c create mode 100644 drivers/clk/zynqmp/pll.c diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 98ce9fc..ab2ea76 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -253,5 +253,6 @@ source "drivers/clk/sunxi-ng/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/ti/Kconfig" source "drivers/clk/uniphier/Kconfig" +source "drivers/clk/zynqmp/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71ec41e..b6ac0d2 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -100,3 +100,4 @@ obj-$(CONFIG_X86) += x86/ endif obj-$(CONFIG_ARCH_ZX) += zte/ obj-$(CONFIG_ARCH_ZYNQ) += zynq/ +obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/ diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig new file mode 100644 index 0000000..1708605 --- /dev/null +++ b/drivers/clk/zynqmp/Kconfig @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +config COMMON_CLK_ZYNQMP + bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers" + depends on ARCH_ZYNQMP || COMPILE_TEST + depends on ZYNQMP_FIRMWARE + help + Support for the Zynqmp Ultrascale clock controller. + It has a dependency on the PMU firmware. + Say Y if you want to include clock support. diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile new file mode 100644 index 0000000..0ec24bf --- /dev/null +++ b/drivers/clk/zynqmp/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +# Zynq Ultrascale+ MPSoC clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c new file mode 100644 index 0000000..83b236f --- /dev/null +++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2018 Xilinx + * + * Gated clock implementation + */ + +#include +#include +#include "clk-zynqmp.h" + +/** + * struct clk_gate - gating clock + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_gate { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw) + +/** + * zynqmp_clk_gate_enable() - Enable clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: 0 on success else error code + */ +static int zynqmp_clk_gate_enable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_enable(clk_id); + + if (ret) + pr_warn_once("%s() clock enabled failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +/* + * zynqmp_clk_gate_disable() - Disable clock + * @hw: handle between common and hardware-specific interfaces + */ +static void zynqmp_clk_gate_disable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_disable(clk_id); + + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_clk_gate_is_enable() - Check clock state + * @hw: handle between common and hardware-specific interfaces + * + * Return: 1 if enabled, 0 if disabled else error code + */ +static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int state, ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) { + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + return -EIO; + } + + return state ? 1 : 0; +} + +static const struct clk_ops zynqmp_clk_gate_ops = { + .enable = zynqmp_clk_gate_enable, + .disable = zynqmp_clk_gate_disable, + .is_enabled = zynqmp_clk_gate_is_enabled, +}; + +/** + * zynqmp_clk_register_gate() - Register a gate clock with the clock framework + * @name: Name of this clock + * @clk_id: Id of this clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware of the registered clock gate + */ +struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_gate *gate; + struct clk_hw *hw; + int ret; + struct clk_init_data init; + + /* allocate the gate */ + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_gate_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + /* struct clk_gate assignments */ + gate->flags = nodes->type_flag; + gate->hw.init = &init; + gate->clk_id = clk_id; + + hw = &gate->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(gate); + hw = ERR_PTR(ret); + } + + return hw; +} diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c new file mode 100644 index 0000000..4143f56 --- /dev/null +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC mux + * + * Copyright (C) 2016-2018 Xilinx + */ + +#include +#include +#include "clk-zynqmp.h" + +/* + * DOC: basic adjustable multiplexer clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is only affected by parent switching. No clk_set_rate support + * parent - parent is adjustable through clk_set_parent + */ + +/** + * struct zynqmp_clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_mux { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw) + +/** + * zynqmp_clk_mux_get_parent() - Get parent of clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: Parent index + */ +static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + u32 val; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getparent(clk_id, &val); + + if (ret) + pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + return val; +} + +/** + * zynqmp_clk_mux_set_parent() - Set parent of clock + * @hw: handle between common and hardware-specific interfaces + * @index: Parent index + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_setparent(clk_id, index); + + if (ret) + pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +static const struct clk_ops zynqmp_clk_mux_ops = { + .get_parent = zynqmp_clk_mux_get_parent, + .set_parent = zynqmp_clk_mux_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +static const struct clk_ops zynqmp_clk_mux_ro_ops = { + .get_parent = zynqmp_clk_mux_get_parent, +}; + +/** + * zynqmp_clk_register_mux() - Register a mux table with the clock + * framework + * @name: Name of this clock + * @clk_id: Id of this clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware of the registered clock mux + */ +struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_mux *mux; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + init.name = name; + if (nodes->type_flag & CLK_MUX_READ_ONLY) + init.ops = &zynqmp_clk_mux_ro_ops; + else + init.ops = &zynqmp_clk_mux_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = num_parents; + mux->flags = nodes->type_flag; + mux->hw.init = &init; + mux->clk_id = clk_id; + + hw = &mux->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + hw = ERR_PTR(ret); + } + + return hw; +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux); diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h new file mode 100644 index 0000000..7ab163b --- /dev/null +++ b/drivers/clk/zynqmp/clk-zynqmp.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016-2018 Xilinx + */ + +#ifndef __LINUX_CLK_ZYNQMP_H_ +#define __LINUX_CLK_ZYNQMP_H_ + +#include + +#include + +/* Clock APIs payload parameters */ +#define CLK_GET_NAME_RESP_LEN 16 +#define CLK_GET_TOPOLOGY_RESP_WORDS 3 +#define CLK_GET_PARENTS_RESP_WORDS 3 +#define CLK_GET_ATTR_RESP_WORDS 1 + +enum topology_type { + TYPE_INVALID, + TYPE_MUX, + TYPE_PLL, + TYPE_FIXEDFACTOR, + TYPE_DIV1, + TYPE_DIV2, + TYPE_GATE, +}; + +/** + * struct clock_topology - Clock topology + * @type: Type of topology + * @flag: Topology flags + * @type_flag: Topology type specific flag + */ +struct clock_topology { + u32 type; + u32 flag; + u32 type_flag; +}; + +struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_divider(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes); + +#endif diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c new file mode 100644 index 0000000..1b07d77 --- /dev/null +++ b/drivers/clk/zynqmp/clkc.c @@ -0,0 +1,716 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2018 Xilinx + * + * Based on drivers/clk/zynq/clkc.c + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "clk-zynqmp.h" + +#define MAX_PARENT 100 +#define MAX_NODES 6 +#define MAX_NAME_LEN 50 + +#define CLK_TYPE_SHIFT 2 + +#define PM_API_PAYLOAD_LEN 3 + +#define NA_PARENT 0xFFFFFFFF +#define DUMMY_PARENT 0xFFFFFFFE + +#define CLK_TYPE_FIELD_LEN 4 +#define CLK_TOPOLOGY_NODE_OFFSET 16 +#define NODES_PER_RESP 3 + +#define CLK_TYPE_FIELD_MASK 0xF +#define CLK_FLAG_FIELD_MASK GENMASK(21, 8) +#define CLK_TYPE_FLAG_FIELD_MASK GENMASK(31, 24) + +#define CLK_PARENTS_ID_LEN 16 +#define CLK_PARENTS_ID_MASK 0xFFFF + +/* Flags for parents */ +#define PARENT_CLK_SELF 0 +#define PARENT_CLK_NODE1 1 +#define PARENT_CLK_NODE2 2 +#define PARENT_CLK_NODE3 3 +#define PARENT_CLK_NODE4 4 +#define PARENT_CLK_EXTERNAL 5 + +#define END_OF_CLK_NAME "END_OF_CLK" +#define END_OF_TOPOLOGY_NODE 1 +#define END_OF_PARENTS 1 +#define RESERVED_CLK_NAME "" + +#define CLK_VALID_MASK 0x1 + +enum clk_type { + CLK_TYPE_OUTPUT, + CLK_TYPE_EXTERNAL, +}; + +/** + * struct clock_parent - Clock parent + * @name: Parent name + * @id: Parent clock ID + * @flag: Parent flags + */ +struct clock_parent { + char name[MAX_NAME_LEN]; + int id; + u32 flag; +}; + +/** + * struct zynqmp_clock - Clock + * @clk_name: Clock name + * @valid: Validity flag of clock + * @type: Clock type (Output/External) + * @node: Clock topology nodes + * @num_nodes: Number of nodes present in topology + * @parent: Parent of clock + * @num_parents: Number of parents of clock + */ +struct zynqmp_clock { + char clk_name[MAX_NAME_LEN]; + u32 valid; + enum clk_type type; + struct clock_topology node[MAX_NODES]; + u32 num_nodes; + struct clock_parent parent[MAX_PARENT]; + u32 num_parents; +}; + +static const char clk_type_postfix[][10] = { + [TYPE_INVALID] = "", + [TYPE_MUX] = "_mux", + [TYPE_GATE] = "", + [TYPE_DIV1] = "_div1", + [TYPE_DIV2] = "_div2", + [TYPE_FIXEDFACTOR] = "_ff", + [TYPE_PLL] = "" +}; + +static struct clk_hw *(* const clk_topology[]) (const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) + = { + [TYPE_INVALID] = NULL, + [TYPE_MUX] = zynqmp_clk_register_mux, + [TYPE_PLL] = zynqmp_clk_register_pll, + [TYPE_FIXEDFACTOR] = zynqmp_clk_register_fixed_factor, + [TYPE_DIV1] = zynqmp_clk_register_divider, + [TYPE_DIV2] = zynqmp_clk_register_divider, + [TYPE_GATE] = zynqmp_clk_register_gate +}; + +static struct zynqmp_clock *clock; +static struct clk_hw_onecell_data *zynqmp_data; +static unsigned int clock_max_idx; +static const struct zynqmp_eemi_ops *eemi_ops; + +/** + * zynqmp_is_valid_clock() - Check whether clock is valid or not + * @clk_id: Clock index + * + * Return: 1 if clock is valid, 0 if clock is invalid else error code + */ +static inline int zynqmp_is_valid_clock(u32 clk_id) +{ + if (clk_id > clock_max_idx) + return -ENODEV; + + return clock[clk_id].valid; +} + +/** + * zynqmp_get_clock_name() - Get name of clock from Clock index + * @clk_id: Clock index + * @clk_name: Name of clock + * + * Return: 0 on success else error code + */ +static int zynqmp_get_clock_name(u32 clk_id, char *clk_name) +{ + int ret; + + ret = zynqmp_is_valid_clock(clk_id); + if (ret == 1) { + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN); + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +/** + * zynqmp_get_clock_type() - Get type of clock + * @clk_id: Clock index + * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL + * + * Return: 0 on success else error code + */ +static int zynqmp_get_clock_type(u32 clk_id, u32 *type) +{ + int ret; + + ret = zynqmp_is_valid_clock(clk_id); + if (ret == 1) { + *type = clock[clk_id].type; + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +/** + * zynqmp_pm_clock_get_num_clocks() - Get number of clocks in system + * @nclocks: Number of clocks in system/board. + * + * Call firmware API to get number of clocks. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pm_clock_get_num_clocks(u32 *nclocks) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_NUM_CLOCKS; + + ret = eemi_ops->query_data(qdata, ret_payload); + *nclocks = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pm_clock_get_name() - Get the name of clock for given id + * @clock_id: ID of the clock to be queried + * @name: Name of given clock + * + * This function is used to get name of clock specified by given + * clock ID. + * + * Return: Returns 0, in case of error name would be 0 + */ +static int zynqmp_pm_clock_get_name(u32 clock_id, char *name) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_NAME; + qdata.arg1 = clock_id; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN); + + return 0; +} + +/** + * zynqmp_pm_clock_get_topology() - Get the topology of clock for given id + * @clock_id: ID of the clock to be queried + * @index: Node index of clock topology + * @topology: Buffer to store nodes in topology and flags + * + * This function is used to get topology information for the clock + * specified by given clock ID. + * + * This API will return 3 node of topology with a single response. To get + * other nodes, master should call same API in loop with new + * index till error is returned. E.g First call should have + * index 0 which will return nodes 0,1 and 2. Next call, index + * should be 3 which will return nodes 3,4 and 5 and so on. + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4); + + return ret; +} + +/** + * zynqmp_clk_register_fixed_factor() - Register fixed factor with the + * clock framework + * @name: Name of this clock + * @clk_id: Clock ID + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to the registered clock + */ +struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + u32 mult, div; + struct clk_hw *hw; + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS; + qdata.arg1 = clk_id; + + ret = eemi_ops->query_data(qdata, ret_payload); + mult = ret_payload[1]; + div = ret_payload[2]; + + hw = clk_hw_register_fixed_factor(NULL, name, + parents[0], + nodes->flag, mult, + div); + + return hw; +} + +/** + * zynqmp_pm_clock_get_parents() - Get the first 3 parents of clock for given id + * @clock_id: Clock ID + * @index: Parent index + * @parents: 3 parents of the given clock + * + * This function is used to get 3 parents for the clock specified by + * given clock ID. + * + * This API will return 3 parents with a single response. To get + * other parents, master should call same API in loop with new + * parent index till error is returned. E.g First call should have + * index 0 which will return parents 0,1 and 2. Next call, index + * should be 3 which will return parent 3,4 and 5 and so on. + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_PARENTS; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4); + + return ret; +} + +/** + * zynqmp_pm_clock_get_attributes() - Get the attributes of clock for given id + * @clock_id: Clock ID + * @attr: Clock attributes + * + * This function is used to get clock's attributes(e.g. valid, clock type, etc). + * + * Return: 0 on success else error+reason + */ +static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr) +{ + struct zynqmp_pm_query_data qdata = {0}; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES; + qdata.arg1 = clock_id; + + ret = eemi_ops->query_data(qdata, ret_payload); + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4); + + return ret; +} + +/** + * __zynqmp_clock_get_topology() - Get topology data of clock from firmware + * response data + * @topology: Clock topology + * @data: Clock topology data received from firmware + * @nnodes: Number of nodes + * + * Return: 0 on success else error+reason + */ +static int __zynqmp_clock_get_topology(struct clock_topology *topology, + u32 *data, u32 *nnodes) +{ + int i; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (!(data[i] & CLK_TYPE_FIELD_MASK)) + return END_OF_TOPOLOGY_NODE; + topology[*nnodes].type = data[i] & CLK_TYPE_FIELD_MASK; + topology[*nnodes].flag = FIELD_GET(CLK_FLAG_FIELD_MASK, + data[i]); + topology[*nnodes].type_flag = + FIELD_GET(CLK_TYPE_FLAG_FIELD_MASK, data[i]); + (*nnodes)++; + } + + return 0; +} + +/** + * zynqmp_clock_get_topology() - Get topology of clock from firmware using + * PM_API + * @clk_id: Clock index + * @topology: Clock topology + * @num_nodes: Number of nodes + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clock_get_topology(u32 clk_id, + struct clock_topology *topology, + u32 *num_nodes) +{ + int j, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_nodes = 0; + for (j = 0; j <= MAX_NODES; j += 3) { + ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp); + if (ret) + return ret; + ret = __zynqmp_clock_get_topology(topology, pm_resp, num_nodes); + if (ret == END_OF_TOPOLOGY_NODE) + return 0; + } + + return 0; +} + +/** + * __zynqmp_clock_get_topology() - Get parents info of clock from firmware + * response data + * @parents: Clock parents + * @data: Clock parents data received from firmware + * @nparent: Number of parent + * + * Return: 0 on success else error+reason + */ +static int __zynqmp_clock_get_parents(struct clock_parent *parents, u32 *data, + u32 *nparent) +{ + int i; + struct clock_parent *parent; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (data[i] == NA_PARENT) + return END_OF_PARENTS; + + parent = &parents[i]; + parent->id = data[i] & CLK_PARENTS_ID_MASK; + if (data[i] == DUMMY_PARENT) { + strcpy(parent->name, "dummy_name"); + parent->flag = 0; + } else { + parent->flag = data[i] >> CLK_PARENTS_ID_LEN; + if (zynqmp_get_clock_name(parent->id, parent->name)) + continue; + } + *nparent += 1; + } + + return 0; +} + +/** + * zynqmp_clock_get_parents() - Get parents info from firmware using PM_API + * @clk_id: Clock index + * @parents: Clock parents + * @num_parents: Total number of parents + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clock_get_parents(u32 clk_id, struct clock_parent *parents, + u32 *num_parents) +{ + int j = 0, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_parents = 0; + do { + /* Get parents from firmware */ + ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp); + if (ret) + return ret; + + ret = __zynqmp_clock_get_parents(&parents[j], pm_resp, + num_parents); + if (ret == END_OF_PARENTS) + return 0; + j += PM_API_PAYLOAD_LEN; + } while (*num_parents <= MAX_PARENT); + + return 0; +} + +/** + * zynqmp_get_parent_list() - Create list of parents name + * @np: Device node + * @clk_id: Clock index + * @parent_list: List of parent's name + * @num_parents: Total number of parents + * + * Return: 0 on success else error+reason + */ +static int zynqmp_get_parent_list(struct device_node *np, u32 clk_id, + const char **parent_list, u32 *num_parents) +{ + int i = 0, ret; + u32 total_parents = clock[clk_id].num_parents; + struct clock_topology *clk_nodes; + struct clock_parent *parents; + + clk_nodes = clock[clk_id].node; + parents = clock[clk_id].parent; + + for (i = 0; i < total_parents; i++) { + if (!parents[i].flag) { + parent_list[i] = parents[i].name; + } else if (parents[i].flag == PARENT_CLK_EXTERNAL) { + ret = of_property_match_string(np, "clock-names", + parents[i].name); + if (ret < 0) + strcpy(parents[i].name, "dummy_name"); + parent_list[i] = parents[i].name; + } else { + strcat(parents[i].name, + clk_type_postfix[clk_nodes[parents[i].flag - 1]. + type]); + parent_list[i] = parents[i].name; + } + } + + *num_parents = total_parents; + return 0; +} + +/** + * zynqmp_register_clk_topology() - Register clock topology + * @clk_id: Clock index + * @clk_name: Clock Name + * @num_parents: Total number of parents + * @parent_names: List of parents name + * + * Return: Returns either clock hardware or error+reason + */ +static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, + int num_parents, + const char **parent_names) +{ + int j; + u32 num_nodes; + char *clk_out = NULL; + struct clock_topology *nodes; + struct clk_hw *hw = NULL; + + nodes = clock[clk_id].node; + num_nodes = clock[clk_id].num_nodes; + + for (j = 0; j < num_nodes; j++) { + /* + * Clock name received from firmware is output clock name. + * Intermediate clock names are postfixed with type of clock. + */ + if (j != (num_nodes - 1)) { + clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name, + clk_type_postfix[nodes[j].type]); + } else { + clk_out = kasprintf(GFP_KERNEL, "%s", clk_name); + } + + if (!clk_topology[nodes[j].type]) + continue; + + hw = (*clk_topology[nodes[j].type])(clk_out, clk_id, + parent_names, + num_parents, + &nodes[j]); + if (IS_ERR(hw)) + pr_warn_once("%s() %s register fail with %ld\n", + __func__, clk_name, PTR_ERR(hw)); + + parent_names[0] = clk_out; + } + kfree(clk_out); + return hw; +} + +/** + * zynqmp_register_clocks() - Register clocks + * @np: Device node + * + * Return: 0 on success else error code + */ +static int zynqmp_register_clocks(struct device_node *np) +{ + int ret; + u32 i, total_parents = 0, type = 0; + const char *parent_names[MAX_PARENT]; + + for (i = 0; i < clock_max_idx; i++) { + char clk_name[MAX_NAME_LEN]; + + /* get clock name, continue to next clock if name not found */ + if (zynqmp_get_clock_name(i, clk_name)) + continue; + + /* Check if clock is valid and output clock. + * Do not register invalid or external clock. + */ + ret = zynqmp_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + /* Get parents of clock*/ + if (zynqmp_get_parent_list(np, i, parent_names, + &total_parents)) { + WARN_ONCE(1, "No parents found for %s\n", + clock[i].clk_name); + continue; + } + + zynqmp_data->hws[i] = + zynqmp_register_clk_topology(i, clk_name, + total_parents, + parent_names); + } + + for (i = 0; i < clock_max_idx; i++) { + if (IS_ERR(zynqmp_data->hws[i])) { + pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n", + clock[i].clk_name, PTR_ERR(zynqmp_data->hws[i])); + WARN_ON(1); + } + } + return 0; +} + +/** + * zynqmp_get_clock_info() - Get clock information from firmware using PM_API + */ +static void zynqmp_get_clock_info(void) +{ + int i, ret; + u32 attr, type = 0; + + for (i = 0; i < clock_max_idx; i++) { + zynqmp_pm_clock_get_name(i, clock[i].clk_name); + if (!strcmp(clock[i].clk_name, RESERVED_CLK_NAME)) + continue; + + ret = zynqmp_pm_clock_get_attributes(i, &attr); + if (ret) + continue; + + clock[i].valid = attr & CLK_VALID_MASK; + clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL : + CLK_TYPE_OUTPUT; + } + + /* Get topology of all clock */ + for (i = 0; i < clock_max_idx; i++) { + ret = zynqmp_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + ret = zynqmp_clock_get_topology(i, clock[i].node, + &clock[i].num_nodes); + if (ret) + continue; + + ret = zynqmp_clock_get_parents(i, clock[i].parent, + &clock[i].num_parents); + if (ret) + continue; + } +} + +/** + * zynqmp_clk_setup() - Setup the clock framework and register clocks + * @np: Device node + * + * Return: 0 on success else error code + */ +static int zynqmp_clk_setup(struct device_node *np) +{ + int ret; + + ret = zynqmp_pm_clock_get_num_clocks(&clock_max_idx); + if (ret) + return ret; + + zynqmp_data = kzalloc(sizeof(*zynqmp_data) + sizeof(*zynqmp_data) * + clock_max_idx, GFP_KERNEL); + if (!zynqmp_data) + return -ENOMEM; + + clock = kcalloc(clock_max_idx, sizeof(*clock), GFP_KERNEL); + if (!clock) { + kfree(zynqmp_data); + return -ENOMEM; + } + + zynqmp_get_clock_info(); + zynqmp_register_clocks(np); + + zynqmp_data->num = clock_max_idx; + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, zynqmp_data); + + return 0; +} + +static int zynqmp_clock_probe(struct platform_device *pdev) +{ + int ret; + struct device *dev = &pdev->dev; + + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (!eemi_ops) + return -ENXIO; + + ret = zynqmp_clk_setup(dev->of_node); + + return ret; +} + +static const struct of_device_id zynqmp_clock_of_match[] = { + {.compatible = "xlnx,zynqmp-clk"}, + {}, +}; +MODULE_DEVICE_TABLE(of, zynqmp_clock_of_match); + +static struct platform_driver zynqmp_clock_driver = { + .driver = { + .name = "zynqmp_clock", + .of_match_table = zynqmp_clock_of_match, + }, + .probe = zynqmp_clock_probe, +}; +module_platform_driver(zynqmp_clock_driver); diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c new file mode 100644 index 0000000..a371c66 --- /dev/null +++ b/drivers/clk/zynqmp/divider.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC Divider support + * + * Copyright (C) 2016-2018 Xilinx + * + * Adjustable divider clock implementation + */ + +#include +#include +#include +#include "clk-zynqmp.h" + +/* + * DOC: basic adjustable divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor) + * parent - fixed parent. No clk_set_parent support + */ + +#define to_zynqmp_clk_divider(_hw) \ + container_of(_hw, struct zynqmp_clk_divider, hw) + +#define CLK_FRAC BIT(13) /* has a fractional parent */ + +/** + * struct zynqmp_clk_divider - adjustable divider clock + * @hw: handle between common and hardware-specific interfaces + * @flags: Hardware specific flags + * @clk_id: Id of clock + * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2) + */ +struct zynqmp_clk_divider { + struct clk_hw hw; + u8 flags; + u32 clk_id; + u32 div_type; +}; + +static inline int zynqmp_divider_get_val(unsigned long parent_rate, + unsigned long rate) +{ + return DIV_ROUND_CLOSEST(parent_rate, rate); +} + +/** + * zynqmp_clk_divider_recalc_rate() - Recalc rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @parent_rate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 div, value; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getdivider(clk_id, &div); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + if (div_type == TYPE_DIV1) + value = div & 0xFFFF; + else + value = div >> 16; + + return DIV_ROUND_UP_ULL(parent_rate, value); +} + +/** + * zynqmp_clk_divider_round_rate() - Round rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @rate: rate of clock to be set + * @prate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *prate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 bestdiv; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + /* if read only, just return current value */ + if (divider->flags & CLK_DIVIDER_READ_ONLY) { + ret = eemi_ops->clock_getdivider(clk_id, &bestdiv); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + if (div_type == TYPE_DIV1) + bestdiv = bestdiv & 0xFFFF; + else + bestdiv = bestdiv >> 16; + + return DIV_ROUND_UP_ULL((u64)*prate, bestdiv); + } + + bestdiv = zynqmp_divider_get_val(*prate, rate); + + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && + (divider->flags & CLK_FRAC)) + bestdiv = rate % *prate ? 1 : bestdiv; + *prate = rate * bestdiv; + + return rate; +} + +/** + * zynqmp_clk_divider_set_rate() - Set rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @rate: rate of clock to be set + * @parent_rate: rate of parent clock + * + * Return: 0 on success else error+reason + */ +static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 value, div; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + value = zynqmp_divider_get_val(parent_rate, rate); + if (div_type == TYPE_DIV1) { + div = value & 0xFFFF; + div |= 0xffff << 16; + } else { + div = 0xffff; + div |= value << 16; + } + + ret = eemi_ops->clock_setdivider(clk_id, div); + + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +static const struct clk_ops zynqmp_clk_divider_ops = { + .recalc_rate = zynqmp_clk_divider_recalc_rate, + .round_rate = zynqmp_clk_divider_round_rate, + .set_rate = zynqmp_clk_divider_set_rate, +}; + +/** + * zynqmp_clk_register_divider() - Register a divider clock + * @name: Name of this clock + * @clk_id: Id of clock + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to registered clock divider + */ +struct clk_hw *zynqmp_clk_register_divider(const char *name, + u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_clk_divider *div; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + /* allocate the divider */ + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_divider_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + /* struct clk_divider assignments */ + div->flags = nodes->type_flag; + div->hw.init = &init; + div->clk_id = clk_id; + div->div_type = nodes->type; + + hw = &div->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(div); + hw = ERR_PTR(ret); + } + + return hw; +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider); diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c new file mode 100644 index 0000000..626bb5f --- /dev/null +++ b/drivers/clk/zynqmp/pll.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Zynq UltraScale+ MPSoC PLL driver + * + * Copyright (C) 2016-2018 Xilinx + */ + +#include +#include +#include +#include "clk-zynqmp.h" + +/** + * struct zynqmp_pll - PLL clock + * @hw: Handle between common and hardware-specific interfaces + * @clk_id: PLL clock ID + */ +struct zynqmp_pll { + struct clk_hw hw; + u32 clk_id; +}; + +#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw) + +#define PLL_FBDIV_MIN 25 +#define PLL_FBDIV_MAX 125 + +#define PS_PLL_VCO_MIN 1500000000 +#define PS_PLL_VCO_MAX 3000000000UL + +enum pll_mode { + PLL_MODE_INT, + PLL_MODE_FRAC, +}; + +#define FRAC_OFFSET 0x8 +#define PLLFCFG_FRAC_EN BIT(31) +#define FRAC_DIV BIT(16) /* 2^16 */ + +/** + * zynqmp_pll_get_mode() - Get mode of PLL + * @hw: Handle between common and hardware-specific interfaces + * + * Return: Mode of PLL + */ +static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0, + ret_payload); + if (ret) + pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret_payload[1]; +} + +/** + * zynqmp_pll_set_mode() - Set the PLL mode + * @hw: Handle between common and hardware-specific interfaces + * @on: Flag to determine the mode + */ +static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + int ret; + u32 mode; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (on) + mode = PLL_MODE_FRAC; + else + mode = PLL_MODE_INT; + + ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL); + if (ret) + pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_pll_round_rate() - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * + * Return: Frequency closest to @rate the hardware can generate + */ +static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + long rate_div, f; + + /* Enable the fractional mode if needed */ + rate_div = (rate * FRAC_DIV) / *prate; + f = rate_div % FRAC_DIV; + zynqmp_pll_set_mode(hw, !!f); + + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + if (rate > PS_PLL_VCO_MAX) { + fbdiv = rate / PS_PLL_VCO_MAX; + rate = rate / (fbdiv + 1); + } + if (rate < PS_PLL_VCO_MIN) { + fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); + rate = rate * fbdiv; + } + return rate; + } + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + return *prate * fbdiv; +} + +/** + * zynqmp_pll_recalc_rate() - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * + * Return: Current clock frequency + */ +static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv, data; + unsigned long rate, frac; + __le32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getdivider(clk_id, &fbdiv); + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + rate = parent_rate * fbdiv; + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0, + ret_payload); + data = ret_payload[1]; + frac = (parent_rate * data) / FRAC_DIV; + rate = rate + frac; + } + + return rate; +} + +/** + * zynqmp_pll_set_rate() - Set rate of PLL + * @hw: Handle between common and hardware-specific interfaces + * @rate: Frequency of clock to be set + * @parent_rate: Clock frequency of parent clock + * + * Set PLL divider to set desired rate. + * + * Returns: rate which is set on success else error code + */ +static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv; + long rate_div, frac, m, f; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + rate_div = (rate * FRAC_DIV) / parent_rate; + m = rate_div / FRAC_DIV; + f = rate_div % FRAC_DIV; + m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX)); + rate = parent_rate * m; + frac = (parent_rate * f) / FRAC_DIV; + + ret = eemi_ops->clock_setdivider(clk_id, m); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL); + + return rate + frac; + } + + fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + ret = eemi_ops->clock_setdivider(clk_id, fbdiv); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return parent_rate * fbdiv; +} + +/** + * zynqmp_pll_is_enabled() - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 1 if the clock is enabled, 0 otherwise + */ +static int zynqmp_pll_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + unsigned int state; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) { + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + return -EIO; + } + + return state ? 1 : 0; +} + +/** + * zynqmp_pll_enable() - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 0 on success else error code + */ +static int zynqmp_pll_enable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (zynqmp_pll_is_enabled(hw)) + return 0; + + ret = eemi_ops->clock_enable(clk_id); + if (ret) + pr_warn_once("%s() clock enable failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret; +} + +/** + * zynqmp_pll_disable() - Disable clock + * @hw: Handle between common and hardware-specific interfaces + */ +static void zynqmp_pll_disable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!zynqmp_pll_is_enabled(hw)) + return; + + ret = eemi_ops->clock_disable(clk_id); + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +static const struct clk_ops zynqmp_pll_ops = { + .enable = zynqmp_pll_enable, + .disable = zynqmp_pll_disable, + .is_enabled = zynqmp_pll_is_enabled, + .round_rate = zynqmp_pll_round_rate, + .recalc_rate = zynqmp_pll_recalc_rate, + .set_rate = zynqmp_pll_set_rate, +}; + +/** + * zynqmp_clk_register_pll() - Register PLL with the clock framework + * @name: PLL name + * @clk_id: Clock ID + * @parents: Name of this clock's parents + * @num_parents: Number of parents + * @nodes: Clock topology node + * + * Return: clock hardware to the registered clock + */ +struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, + const struct clock_topology *nodes) +{ + struct zynqmp_pll *pll; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + init.name = name; + init.ops = &zynqmp_pll_ops; + init.flags = nodes->flag; + init.parent_names = parents; + init.num_parents = 1; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + pll->hw.init = &init; + pll->clk_id = clk_id; + + hw = &pll->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(pll); + return ERR_PTR(ret); + } + + clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX); + if (ret < 0) + pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret); + + return hw; +} diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 7a9db08..3c3c28e 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -72,6 +72,7 @@ enum pm_query_id { PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS, PM_QID_CLOCK_GET_PARENTS, PM_QID_CLOCK_GET_ATTRIBUTES, + PM_QID_CLOCK_GET_NUM_CLOCKS = 12, }; /** -- 2.7.4