From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Fuzzey Date: Thu, 4 Oct 2018 19:53:06 +0200 Subject: [U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration In-Reply-To: <1538675595-3706-1-git-send-email-martin.fuzzey@flowbird.group> References: <1538675595-3706-1-git-send-email-martin.fuzzey@flowbird.group> Message-ID: <1538675595-3706-2-git-send-email-martin.fuzzey@flowbird.group> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The DT binding says that phy-reset-duration is in ms, but the driver currently uses udelay(). Switch to mdelay() to fix this. Signed-off-by: Martin Fuzzey --- drivers/net/fec_mxc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index dac07b6..a1295fc 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1254,7 +1254,7 @@ static void fec_gpio_reset(struct fec_priv *priv) debug("fec_gpio_reset: fec_gpio_reset(dev)\n"); if (dm_gpio_is_valid(&priv->phy_reset_gpio)) { dm_gpio_set_value(&priv->phy_reset_gpio, 1); - udelay(priv->reset_delay); + mdelay(priv->reset_delay); dm_gpio_set_value(&priv->phy_reset_gpio, 0); } } -- 1.9.1