From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Fuzzey Date: Thu, 4 Oct 2018 19:59:21 +0200 Subject: [U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT In-Reply-To: <1538675965-4495-1-git-send-email-martin.fuzzey@flowbird.group> References: <1538675965-4495-1-git-send-email-martin.fuzzey@flowbird.group> Message-ID: <1538675965-4495-5-git-send-email-martin.fuzzey@flowbird.group> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The DT property "phy-mode" already provides the transceiver type. Use it so that we do not have to also set CONFIG_FEC_XCV_TYPE Signed-off-by: Martin Fuzzey --- drivers/net/fec_mxc.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 4a5555e..e3fc595 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1312,8 +1312,27 @@ static int fecmxc_probe(struct udevice *dev) } priv->bus = bus; - priv->xcv_type = CONFIG_FEC_XCV_TYPE; priv->interface = pdata->phy_interface; + switch (priv->interface) { + case PHY_INTERFACE_MODE_MII: + priv->xcv_type = MII100; + break; + case PHY_INTERFACE_MODE_RMII: + priv->xcv_type = RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + priv->xcv_type = RGMII; + break; + default: + priv->xcv_type = CONFIG_FEC_XCV_TYPE; + printf("Unsupported interface type %d defaulting to %d\n", + priv->interface, priv->xcv_type); + break; + } + ret = fec_phy_init(priv, dev); if (ret) goto err_phy; -- 1.9.1