All of lore.kernel.org
 help / color / mirror / Atom feed
From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: arnd@arndb.de, linux-soc@vger.kernel.org,
	Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v6 01/15] octeontx2-af: Add Marvell OcteonTX2 RVU AF driver
Date: Thu,  4 Oct 2018 23:51:44 +0530	[thread overview]
Message-ID: <1538677318-5002-2-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1538677318-5002-1-git-send-email-sunil.kovvuri@gmail.com>

From: Sunil Goutham <sgoutham@marvell.com>

This patch adds basic template for Marvell OcteonTX2's
resource virtualization unit (RVU) admin function (AF)
driver. Just the driver registration and probe.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/Kconfig               |   3 +
 drivers/net/ethernet/marvell/Makefile              |   1 +
 drivers/net/ethernet/marvell/octeontx2/Kconfig     |  12 ++
 drivers/net/ethernet/marvell/octeontx2/Makefile    |   6 +
 drivers/net/ethernet/marvell/octeontx2/af/Makefile |   8 ++
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    | 126 +++++++++++++++++++++
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  31 +++++
 7 files changed, 187 insertions(+)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/Kconfig
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/Makefile
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/Makefile
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu.h

diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index f33fd22..3238aa7 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -167,4 +167,7 @@ config SKY2_DEBUG
 
 	  If unsure, say N.
 
+
+source "drivers/net/ethernet/marvell/octeontx2/Kconfig"
+
 endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
index 55d4d10..89dea72 100644
--- a/drivers/net/ethernet/marvell/Makefile
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_MVPP2) += mvpp2/
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
+obj-y		+= octeontx2/
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
new file mode 100644
index 0000000..9743502
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -0,0 +1,12 @@
+#
+# Marvell OcteonTX2 drivers configuration
+#
+
+config OCTEONTX2_AF
+	tristate "Marvell OcteonTX2 RVU Admin Function driver"
+	depends on ARM64 && PCI
+	help
+	  This driver supports Marvell's OcteonTX2 Resource Virtualization
+	  Unit's admin function manager which manages all RVU HW resources
+	  and provides a medium to other PF/VFs to configure HW. Should be
+	  enabled for other RVU device drivers to work.
diff --git a/drivers/net/ethernet/marvell/octeontx2/Makefile b/drivers/net/ethernet/marvell/octeontx2/Makefile
new file mode 100644
index 0000000..e579dcd
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell OcteonTX2 device drivers.
+#
+
+obj-$(CONFIG_OCTEONTX2_AF) += af/
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/Makefile b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
new file mode 100644
index 0000000..dacbd16
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's OcteonTX2 RVU Admin Function driver
+#
+
+obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
+
+octeontx2_af-y := rvu.o
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
new file mode 100644
index 0000000..5af4da6
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/sysfs.h>
+
+#include "rvu.h"
+
+#define DRV_NAME	"octeontx2-af"
+#define DRV_STRING      "Marvell OcteonTX2 RVU Admin Function Driver"
+#define DRV_VERSION	"1.0"
+
+/* Supported devices */
+static const struct pci_device_id rvu_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_RVU_AF) },
+	{ 0, }  /* end of table */
+};
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION(DRV_STRING);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, rvu_id_table);
+
+static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct rvu *rvu;
+	int    err;
+
+	rvu = devm_kzalloc(dev, sizeof(*rvu), GFP_KERNEL);
+	if (!rvu)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, rvu);
+	rvu->pdev = pdev;
+	rvu->dev = &pdev->dev;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device\n");
+		goto err_freemem;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(dev, "PCI request regions failed 0x%x\n", err);
+		goto err_disable_device;
+	}
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to set DMA mask\n");
+		goto err_release_regions;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to set consistent DMA mask\n");
+		goto err_release_regions;
+	}
+
+	/* Map Admin function CSRs */
+	rvu->afreg_base = pcim_iomap(pdev, PCI_AF_REG_BAR_NUM, 0);
+	rvu->pfreg_base = pcim_iomap(pdev, PCI_PF_REG_BAR_NUM, 0);
+	if (!rvu->afreg_base || !rvu->pfreg_base) {
+		dev_err(dev, "Unable to map admin function CSRs, aborting\n");
+		err = -ENOMEM;
+		goto err_release_regions;
+	}
+
+	return 0;
+
+err_release_regions:
+	pci_release_regions(pdev);
+err_disable_device:
+	pci_disable_device(pdev);
+err_freemem:
+	pci_set_drvdata(pdev, NULL);
+	devm_kfree(dev, rvu);
+	return err;
+}
+
+static void rvu_remove(struct pci_dev *pdev)
+{
+	struct rvu *rvu = pci_get_drvdata(pdev);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	devm_kfree(&pdev->dev, rvu);
+}
+
+static struct pci_driver rvu_driver = {
+	.name = DRV_NAME,
+	.id_table = rvu_id_table,
+	.probe = rvu_probe,
+	.remove = rvu_remove,
+};
+
+static int __init rvu_init_module(void)
+{
+	pr_info("%s: %s\n", DRV_NAME, DRV_STRING);
+
+	return pci_register_driver(&rvu_driver);
+}
+
+static void __exit rvu_cleanup_module(void)
+{
+	pci_unregister_driver(&rvu_driver);
+}
+
+module_init(rvu_init_module);
+module_exit(rvu_cleanup_module);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
new file mode 100644
index 0000000..4a4b0ad
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_H
+#define RVU_H
+
+/* PCI device IDs */
+#define	PCI_DEVID_OCTEONTX2_RVU_AF		0xA065
+
+/* PCI BAR nos */
+#define	PCI_AF_REG_BAR_NUM			0
+#define	PCI_PF_REG_BAR_NUM			2
+#define	PCI_MBOX_BAR_NUM			4
+
+#define NAME_SIZE				32
+
+struct rvu {
+	void __iomem		*afreg_base;
+	void __iomem		*pfreg_base;
+	struct pci_dev		*pdev;
+	struct device		*dev;
+};
+
+#endif /* RVU_H */
-- 
2.7.4

  reply	other threads:[~2018-10-05  1:17 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-04 18:21 [PATCH v6 00/15] octeontx2-af: Add RVU Admin Function driver sunil.kovvuri
2018-10-04 18:21 ` sunil.kovvuri [this message]
2018-10-04 18:21 ` [PATCH v6 02/15] octeontx2-af: Reset all RVU blocks sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 03/15] octeontx2-af: Gather RVU blocks HW info sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 04/15] octeontx2-af: Add mailbox support infra sunil.kovvuri
2018-10-05 21:50   ` David Miller
2018-10-06  5:01     ` [EXT] " Goutham, Sunil
2018-10-04 18:21 ` [PATCH v6 05/15] octeontx2-af: Add mailbox IRQ and msg handlers sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 06/15] octeontx2-af: Convert mbox msg id check to a macro sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 07/15] octeontx2-af: Scan blocks for LFs provisioned to PF/VF sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 08/15] octeontx2-af: Add RVU block LF provisioning support sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 09/15] octeontx2-af: Configure block LF's MSIX vector offset sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 10/15] octeontx2-af: Reconfig MSIX base with IOVA sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 11/15] octeontx2-af: Add Marvell OcteonTX2 CGX driver sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 12/15] octeontx2-af: Set RVU PFs to CGX LMACs mapping sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 13/15] octeontx2-af: Add support for CGX link management sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 14/15] octeontx2-af: Register for CGX lmac events sunil.kovvuri
2018-10-04 18:21 ` [PATCH v6 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver sunil.kovvuri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538677318-5002-2-git-send-email-sunil.kovvuri@gmail.com \
    --to=sunil.kovvuri@gmail.com \
    --cc=arnd@arndb.de \
    --cc=davem@davemloft.net \
    --cc=linux-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.