From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rahul Lakkireddy Subject: [PATCH v2 0/3] ethdev: add IP address and TCP/UDP port rewrite actions to flow API Date: Sat, 6 Oct 2018 21:11:57 +0530 Message-ID: <1538840520-10369-1-git-send-email-rahul.lakkireddy@chelsio.com> References: Cc: indranil@chelsio.com, nirranjan@chelsio.com To: dev@dpdk.org Return-path: Received: from stargate.chelsio.com (stargate.chelsio.com [12.32.117.8]) by dpdk.org (Postfix) with ESMTP id 26BAF2C24 for ; Sat, 6 Oct 2018 17:42:19 +0200 (CEST) In-Reply-To: List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" This series of patches add support for actions: - SET_IPV4_SRC - set a new IPv4 source address. - SET_IPV4_DST - set a new IPv4 destination address. - SET_IPV6_SRC - set a new IPv6 source address. - SET_IPV6_DST - set a new IPv6 destination address. - SET_TP_SRC - set a new TCP/UDP source port number. - SET_TP_DST - set a new TCP/UDP destination port number. These actions are useful in Network Address Translation use case to edit IP address and TCP/UDP port numbers before switching the packets out to the destination device port. Patch 1 adds support for IP address rewrite to rte_flow and testpmd. Patch 2 adds support for TCP/UDP port rewrite to rte_flow and testpmd. Patch 3 shows CXGBE PMD example to offload these actions to hardware. Feedback and suggestions will be much appreciated. Thanks, Rahul RFC v1: http://mails.dpdk.org/archives/dev/2018-June/104913.html RFC v2: http://mails.dpdk.org/archives/dev/2018-August/109672.html --- v2: - Rebased to tip. - Removed adding actions to app/test-pmd/config.c, to sync with rte_flow_conv() changes. v1 changes since RFC v2: - Updated comments, help messages, and doc to indicate that IP/TCP/UDP of the outermost headers are modified. - Updated comments and doc to indicate that a corresponding valid flow pattern item must be specified to offload corresponding header rewrite actions. - Re-based CXGBE PMD changes in patch 3 to tip. - Updated all instances of fw_filter_wr to new fw_filter2_wr and removed fw_filter_wr. - Ensure correct ULP type is set when offloading NAT actions. - Returning appropriate RTE_FLOW_ERROR_TYPE_ACTION error if a corresponding valid flow pattern item is not found. - Updated release notes. Rahul Lakkireddy (3): ethdev: add flow api actions to modify IP addresses ethdev: add flow api actions to modify TCP/UDP port numbers net/cxgbe: add flow actions to modify IP and TCP/UDP port address app/test-pmd/cmdline_flow.c | 156 +++++++++++++++++ doc/guides/prog_guide/rte_flow.rst | 108 ++++++++++++ doc/guides/rel_notes/release_18_11.rst | 13 +- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 28 +++ drivers/net/cxgbe/base/common.h | 1 + drivers/net/cxgbe/base/t4_msg.h | 1 + drivers/net/cxgbe/base/t4fw_interface.h | 23 ++- drivers/net/cxgbe/cxgbe_filter.c | 37 +++- drivers/net/cxgbe/cxgbe_filter.h | 23 +++ drivers/net/cxgbe/cxgbe_flow.c | 178 +++++++++++++++++++- drivers/net/cxgbe/cxgbe_main.c | 10 ++ lib/librte_ethdev/rte_flow.c | 12 ++ lib/librte_ethdev/rte_flow.h | 107 ++++++++++++ 13 files changed, 685 insertions(+), 12 deletions(-) -- 2.18.0