From: Jaganath Kanakkassery <jaganath.k.os@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: Jaganath Kanakkassery <jaganath.kanakkassery@intel.com>
Subject: [PATCH v1] btmgmt: Add BREDR PHYs in PHY Configuration commands
Date: Thu, 25 Oct 2018 13:59:54 +0530 [thread overview]
Message-ID: <1540456194-26031-1-git-send-email-jaganath.kanakkassery@intel.com> (raw)
This also adds LE prefix for LE phys to make it more
descriptive
---
lib/mgmt.h | 32 ++++++++++++++++---------
tools/btmgmt.c | 75 ++++++++++++++++++++++++++++++++++------------------------
2 files changed, 65 insertions(+), 42 deletions(-)
diff --git a/lib/mgmt.h b/lib/mgmt.h
index ec6a380..570dec9 100644
--- a/lib/mgmt.h
+++ b/lib/mgmt.h
@@ -552,16 +552,26 @@ struct mgmt_cp_set_appearance {
#define MGMT_OP_GET_PHY_CONFIGURATION 0x0044
struct mgmt_rp_get_phy_confguration {
- uint16_t supported_phys;
- uint16_t selected_phys;
-} __packed;
-
-#define MGMT_PHY_LE_1M_TX 0x0001
-#define MGMT_PHY_LE_1M_RX 0x0002
-#define MGMT_PHY_LE_2M_TX 0x0004
-#define MGMT_PHY_LE_2M_RX 0x0008
-#define MGMT_PHY_LE_CODED_TX 0x0010
-#define MGMT_PHY_LE_CODED_RX 0x0020
+ uint32_t supported_phys;
+ uint32_t configurable_phys;
+ uint32_t selected_phys;
+} __packed;
+
+#define MGMT_PHY_BR_1M_1SLOT 0x00000001
+#define MGMT_PHY_BR_1M_3SLOT 0x00000002
+#define MGMT_PHY_BR_1M_5SLOT 0x00000004
+#define MGMT_PHY_EDR_2M_1SLOT 0x00000008
+#define MGMT_PHY_EDR_2M_3SLOT 0x00000010
+#define MGMT_PHY_EDR_2M_5SLOT 0x00000020
+#define MGMT_PHY_EDR_3M_1SLOT 0x00000040
+#define MGMT_PHY_EDR_3M_3SLOT 0x00000080
+#define MGMT_PHY_EDR_3M_5SLOT 0x00000100
+#define MGMT_PHY_LE_1M_TX 0x00000200
+#define MGMT_PHY_LE_1M_RX 0x00000400
+#define MGMT_PHY_LE_2M_TX 0x00000800
+#define MGMT_PHY_LE_2M_RX 0x00001000
+#define MGMT_PHY_LE_CODED_TX 0x00002000
+#define MGMT_PHY_LE_CODED_RX 0x00004000
#define MGMT_PHY_LE_TX_MASK (MGMT_PHY_LE_1M_TX | MGMT_PHY_LE_2M_TX | \
MGMT_PHY_LE_CODED_TX)
@@ -570,7 +580,7 @@ struct mgmt_rp_get_phy_confguration {
#define MGMT_OP_SET_PHY_CONFIGURATION 0x0045
struct mgmt_cp_set_phy_confguration {
- uint16_t default_phys;
+ uint32_t selected_phys;
} __packed;
diff --git a/tools/btmgmt.c b/tools/btmgmt.c
index 9e3a3ca..6922f3d 100644
--- a/tools/btmgmt.c
+++ b/tools/btmgmt.c
@@ -4181,15 +4181,24 @@ static void cmd_appearance(int argc, char **argv)
}
static const char *phys_str[] = {
- "1MTX",
- "1MRX",
- "2MTX",
- "2MRX",
- "CODEDTX",
- "CODEDRX",
+ "BR1M1SLOT",
+ "BR1M3SLOT",
+ "BR1M5SLOT",
+ "EDR2M1SLOT",
+ "EDR2M3SLOT",
+ "EDR2M5SLOT",
+ "EDR3M1SLOT",
+ "EDR3M3SLOT",
+ "EDR3M5SLOT",
+ "LE1MTX",
+ "LE1MRX",
+ "LE2MTX",
+ "LE2MRX",
+ "LECODEDTX",
+ "LECODEDRX",
};
-static const char *phys2str(uint16_t phys)
+static const char *phys2str(uint32_t phys)
{
static char str[256];
unsigned int i;
@@ -4207,11 +4216,25 @@ static const char *phys2str(uint16_t phys)
return str;
}
+static bool str2phy(const char *phy_str, uint32_t *phy_val)
+{
+ unsigned int i;
+
+ for (i = 0; i < NELEM(phys_str); i++) {
+ if (strcasecmp(phys_str[i], phy_str) == 0) {
+ *phy_val = (1 << i);
+ return true;
+ }
+ }
+
+ return false;
+}
+
static void get_phy_rsp(uint8_t status, uint16_t len, const void *param,
void *user_data)
{
const struct mgmt_rp_get_phy_confguration *rp = param;
- uint16_t supported_flags, selected_phys;
+ uint32_t supported_phys, selected_phys, configurable_phys;
if (status != 0) {
error("Get PHY Configuration failed with status 0x%02x (%s)",
@@ -4224,10 +4247,12 @@ static void get_phy_rsp(uint8_t status, uint16_t len, const void *param,
return bt_shell_noninteractive_quit(EXIT_FAILURE);
}
- supported_flags = get_le16(&rp->supported_phys);
- selected_phys = get_le16(&rp->selected_phys);
+ supported_phys = get_le32(&rp->supported_phys);
+ configurable_phys = get_le32(&rp->configurable_phys);
+ selected_phys = get_le32(&rp->selected_phys);
- print("Supported phys: %s", phys2str(supported_flags));
+ print("Supported phys: %s", phys2str(supported_phys));
+ print("Configurable phys: %s", phys2str(configurable_phys));
print("Selected phys: %s", phys2str(selected_phys));
bt_shell_noninteractive_quit(EXIT_SUCCESS);
@@ -4266,33 +4291,20 @@ static void cmd_phy(int argc, char **argv)
{
struct mgmt_cp_set_phy_confguration cp;
int i;
- uint16_t phys = 0;
+ uint32_t phys = 0;
uint16_t index;
if (argc < 2)
return get_phy();
for (i = 1; i < argc; i++) {
- if (strcasecmp(argv[i], "1MTX") == 0)
- phys |= MGMT_PHY_LE_1M_TX;
-
- if (strcasecmp(argv[i], "1MRX") == 0)
- phys |= MGMT_PHY_LE_1M_RX;
-
- if (strcasecmp(argv[i], "2MTX") == 0)
- phys |= MGMT_PHY_LE_2M_TX;
-
- if (strcasecmp(argv[i], "2MRX") == 0)
- phys |= MGMT_PHY_LE_2M_RX;
-
- if (strcasecmp(argv[i], "CODEDTX") == 0)
- phys |= MGMT_PHY_LE_CODED_TX;
+ uint32_t phy_val;
- if (strcasecmp(argv[i], "CODEDRX") == 0)
- phys |= MGMT_PHY_LE_CODED_RX;
+ if (str2phy(argv[i], &phy_val))
+ phys |= phy_val;
}
- cp.default_phys = cpu_to_le16(phys);
+ cp.selected_phys = cpu_to_le32(phys);
index = mgmt_index;
if (index == MGMT_INDEX_NONE)
@@ -4501,8 +4513,9 @@ static const struct bt_shell_menu main_menu = {
cmd_clr_adv, "Clear advertising instances" },
{ "appearance", "<appearance>",
cmd_appearance, "Set appearance" },
- { "phy", "[1MTX] [1MRX] [2MTX] [2MRX] [CODEDTX] "
- "[CODEDRX] [BR1M1SLOT] [BR1M3SLOT] [BR1M5SLOT]"
+ { "phy", "[LE1MTX] [LE1MRX] [LE2MTX] [LE2MRX] "
+ "[LECODEDTX] [LECODEDRX] "
+ "[BR1M1SLOT] [BR1M3SLOT] [BR1M5SLOT]"
"[EDR2M1SLOT] [EDR2M3SLOT] [EDR2M5SLOT]"
"[EDR3M1SLOT] [EDR3M3SLOT] [EDR3M5SLOT]",
cmd_phy, "Get/Set PHY Configuration" },
--
2.7.4
next reply other threads:[~2018-10-25 8:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 8:29 Jaganath Kanakkassery [this message]
2018-11-06 9:35 ` [PATCH v1] btmgmt: Add BREDR PHYs in PHY Configuration commands Jaganath K
2018-11-07 11:40 ` Luiz Augusto von Dentz
2018-11-07 11:55 ` Jaganath K
2018-11-07 16:19 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540456194-26031-1-git-send-email-jaganath.kanakkassery@intel.com \
--to=jaganath.k.os@gmail.com \
--cc=jaganath.kanakkassery@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.