From: Yong Zhi <yong.zhi@intel.com>
To: linux-media@vger.kernel.org, sakari.ailus@linux.intel.com
Cc: tfiga@chromium.org, mchehab@kernel.org, hans.verkuil@cisco.com,
laurent.pinchart@ideasonboard.com, rajmohan.mani@intel.com,
jian.xu.zheng@intel.com, jerry.w.hu@intel.com,
tuukka.toivonen@intel.com, tian.shu.qiu@intel.com,
bingbu.cao@intel.com, Yong Zhi <yong.zhi@intel.com>
Subject: [PATCH v7 11/16] intel-ipu3: css: Compute and program ccs
Date: Mon, 29 Oct 2018 15:23:05 -0700 [thread overview]
Message-ID: <1540851790-1777-12-git-send-email-yong.zhi@intel.com> (raw)
In-Reply-To: <1540851790-1777-1-git-send-email-yong.zhi@intel.com>
A collection of routines that are mainly used
to calculate the parameters for accelerator cluster.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
---
drivers/media/pci/intel/ipu3/ipu3-css-params.c | 2907 ++++++++++++++++++++++++
drivers/media/pci/intel/ipu3/ipu3-css-params.h | 25 +
2 files changed, 2932 insertions(+)
create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.c
create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.h
diff --git a/drivers/media/pci/intel/ipu3/ipu3-css-params.c b/drivers/media/pci/intel/ipu3/ipu3-css-params.c
new file mode 100644
index 0000000..add2be4
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-css-params.c
@@ -0,0 +1,2907 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Intel Corporation
+
+#include <linux/device.h>
+
+#include "ipu3-css.h"
+#include "ipu3-css-fw.h"
+#include "ipu3-tables.h"
+
+#define DIV_ROUND_CLOSEST_DOWN(a, b) (((a) + ((b) / 2) - 1) / (b))
+#define roundclosest_down(a, b) (DIV_ROUND_CLOSEST_DOWN(a, b) * (b))
+
+#define IPU3_UAPI_ANR_MAX_RESET ((1 << 12) - 1)
+#define IPU3_UAPI_ANR_MIN_RESET (((-1) << 12) + 1)
+
+struct ipu3_css_scaler_info {
+ unsigned int phase_step; /* Same for luma/chroma */
+ int exp_shift;
+
+ unsigned int phase_init; /* luma/chroma dependent */
+ int pad_left;
+ int pad_right;
+ int crop_left;
+ int crop_top;
+};
+
+static unsigned int ipu3_css_scaler_get_exp(unsigned int counter,
+ unsigned int divider)
+{
+ int i = fls(divider) - fls(counter);
+
+ if (i <= 0)
+ return 0;
+
+ if (divider >> i < counter)
+ i = i - 1;
+
+ return i;
+}
+
+/* Set up the CSS scaler look up table */
+static void
+ipu3_css_scaler_setup_lut(unsigned int taps, unsigned int input_width,
+ unsigned int output_width, int phase_step_correction,
+ const int *coeffs, unsigned int coeffs_size,
+ s8 coeff_lut[], struct ipu3_css_scaler_info *info)
+{
+ int tap, phase, phase_sum_left, phase_sum_right;
+ int exponent = ipu3_css_scaler_get_exp(output_width, input_width);
+ int mantissa = (1 << exponent) * output_width;
+ unsigned int phase_step;
+
+ if (input_width == output_width) {
+ for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
+ for (tap = 0; tap < taps; tap++) {
+ coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap]
+ = 0;
+ }
+ }
+
+ info->phase_step = IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF);
+ info->exp_shift = 0;
+ info->pad_left = 0;
+ info->pad_right = 0;
+ info->phase_init = 0;
+ info->crop_left = 0;
+ info->crop_top = 0;
+ return;
+ }
+
+ for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
+ for (tap = 0; tap < taps; tap++) {
+ /* flip table to for convolution reverse indexing */
+ s64 coeff = coeffs[coeffs_size -
+ ((tap * (coeffs_size / taps)) + phase) - 1];
+ coeff *= mantissa;
+ coeff = div64_long(coeff, input_width);
+
+ /* Add +"0.5" */
+ coeff += 1 << (IMGU_SCALER_COEFF_BITS - 1);
+ coeff >>= IMGU_SCALER_COEFF_BITS;
+
+ coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap] =
+ coeff;
+ }
+ }
+
+ phase_step = IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF) *
+ output_width / input_width;
+ phase_step += phase_step_correction;
+ phase_sum_left = (taps / 2 * IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF)) -
+ (1 << (IMGU_SCALER_PHASE_COUNTER_PREC_REF - 1));
+ phase_sum_right = (taps / 2 * IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF)) +
+ (1 << (IMGU_SCALER_PHASE_COUNTER_PREC_REF - 1));
+
+ info->exp_shift = IMGU_SCALER_MAX_EXPONENT_SHIFT - exponent;
+ info->pad_left = (phase_sum_left % phase_step == 0) ?
+ phase_sum_left / phase_step - 1 : phase_sum_left / phase_step;
+ info->pad_right = (phase_sum_right % phase_step == 0) ?
+ phase_sum_right / phase_step - 1 : phase_sum_right / phase_step;
+ info->phase_init = phase_sum_left - phase_step * info->pad_left;
+ info->phase_step = phase_step;
+ info->crop_left = taps - 1;
+ info->crop_top = taps - 1;
+}
+
+/*
+ * Calculates the exact output image width/height, based on phase_step setting
+ * (must be perfectly aligned with hardware).
+ */
+static unsigned int
+ipu3_css_scaler_calc_scaled_output(unsigned int input,
+ struct ipu3_css_scaler_info *info)
+{
+ unsigned int arg1 = input * info->phase_step +
+ (1 - IMGU_SCALER_TAPS_Y / 2) * IMGU_SCALER_FIR_PHASES -
+ IMGU_SCALER_FIR_PHASES / (2 * IMGU_SCALER_PHASES);
+ unsigned int arg2 = ((IMGU_SCALER_TAPS_Y / 2) * IMGU_SCALER_FIR_PHASES +
+ IMGU_SCALER_FIR_PHASES / (2 * IMGU_SCALER_PHASES)) *
+ IMGU_SCALER_FIR_PHASES + info->phase_step / 2;
+
+ return ((arg1 + (arg2 - IMGU_SCALER_FIR_PHASES * info->phase_step) /
+ IMGU_SCALER_FIR_PHASES) / (2 * IMGU_SCALER_FIR_PHASES)) * 2;
+}
+
+/*
+ * Calculate the output width and height, given the luma
+ * and chroma details of a scaler
+ */
+static void
+ipu3_css_scaler_calc(u32 input_width, u32 input_height, u32 target_width,
+ u32 target_height, struct imgu_abi_osys_config *cfg,
+ struct ipu3_css_scaler_info *info_luma,
+ struct ipu3_css_scaler_info *info_chroma,
+ unsigned int *output_width, unsigned int *output_height,
+ unsigned int *procmode)
+{
+ u32 out_width = target_width;
+ u32 out_height = target_height;
+ const unsigned int height_alignment = 2;
+ int phase_step_correction = -1;
+
+ /*
+ * Calculate scaled output width. If the horizontal and vertical scaling
+ * factor is different, then choose the biggest and crop off excess
+ * lines or columns after formatting.
+ */
+ if (target_height * input_width > target_width * input_height)
+ target_width = DIV_ROUND_UP(target_height * input_width,
+ input_height);
+
+ if (input_width == target_width)
+ *procmode = IMGU_ABI_OSYS_PROCMODE_BYPASS;
+ else
+ *procmode = IMGU_ABI_OSYS_PROCMODE_DOWNSCALE;
+
+ memset(&cfg->scaler_coeffs_chroma, 0,
+ sizeof(cfg->scaler_coeffs_chroma));
+ memset(&cfg->scaler_coeffs_luma, 0, sizeof(*cfg->scaler_coeffs_luma));
+ do {
+ phase_step_correction++;
+
+ ipu3_css_scaler_setup_lut(IMGU_SCALER_TAPS_Y,
+ input_width, target_width,
+ phase_step_correction,
+ ipu3_css_downscale_4taps,
+ IMGU_SCALER_DOWNSCALE_4TAPS_LEN,
+ cfg->scaler_coeffs_luma, info_luma);
+
+ ipu3_css_scaler_setup_lut(IMGU_SCALER_TAPS_UV,
+ input_width, target_width,
+ phase_step_correction,
+ ipu3_css_downscale_2taps,
+ IMGU_SCALER_DOWNSCALE_2TAPS_LEN,
+ cfg->scaler_coeffs_chroma,
+ info_chroma);
+
+ out_width = ipu3_css_scaler_calc_scaled_output(input_width,
+ info_luma);
+ out_height = ipu3_css_scaler_calc_scaled_output(input_height,
+ info_luma);
+ } while ((out_width < target_width || out_height < target_height ||
+ !IS_ALIGNED(out_height, height_alignment)) &&
+ phase_step_correction <= 5);
+
+ *output_width = out_width;
+ *output_height = out_height;
+}
+
+/********************** Osys routines for scaler****************************/
+
+static void ipu3_css_osys_set_format(enum imgu_abi_frame_format host_format,
+ unsigned int *osys_format,
+ unsigned int *osys_tiling)
+{
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YUV420;
+ *osys_tiling = IMGU_ABI_OSYS_TILING_NONE;
+
+ switch (host_format) {
+ case IMGU_ABI_FRAME_FORMAT_YUV420:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YUV420;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_YV12:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YV12;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV12:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV12;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV16:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV16;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV21:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV21;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV12_TILEY:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV12;
+ *osys_tiling = IMGU_ABI_OSYS_TILING_Y;
+ break;
+ default:
+ /* For now, assume use default values */
+ break;
+ }
+}
+
+/*
+ * Function calculates input frame stripe offset, based
+ * on output frame stripe offset and filter parameters.
+ */
+static int ipu3_css_osys_calc_stripe_offset(int stripe_offset_out,
+ int fir_phases, int phase_init,
+ int phase_step, int pad_left)
+{
+ int stripe_offset_inp = stripe_offset_out * fir_phases -
+ pad_left * phase_step;
+
+ return DIV_ROUND_UP(stripe_offset_inp - phase_init, phase_step);
+}
+
+/*
+ * Calculate input frame phase, given the output frame
+ * stripe offset and filter parameters
+ */
+static int ipu3_css_osys_calc_stripe_phase_init(int stripe_offset_out,
+ int fir_phases, int phase_init,
+ int phase_step, int pad_left)
+{
+ int stripe_offset_inp =
+ ipu3_css_osys_calc_stripe_offset(stripe_offset_out,
+ fir_phases, phase_init,
+ phase_step, pad_left);
+
+ return phase_init + ((pad_left + stripe_offset_inp) * phase_step) -
+ stripe_offset_out * fir_phases;
+}
+
+/*
+ * This function calculates input frame stripe width,
+ * based on output frame stripe offset and filter parameters
+ */
+static int ipu3_css_osys_calc_inp_stripe_width(int stripe_width_out,
+ int fir_phases, int phase_init,
+ int phase_step, int fir_taps,
+ int pad_left, int pad_right)
+{
+ int stripe_width_inp = (stripe_width_out + fir_taps - 1) * fir_phases;
+
+ stripe_width_inp = DIV_ROUND_UP(stripe_width_inp - phase_init,
+ phase_step);
+
+ return stripe_width_inp - pad_left - pad_right;
+}
+
+/*
+ * This function calculates output frame stripe width, basedi
+ * on output frame stripe offset and filter parameters
+ */
+static int ipu3_css_osys_out_stripe_width(int stripe_width_inp, int fir_phases,
+ int phase_init, int phase_step,
+ int fir_taps, int pad_left,
+ int pad_right, int column_offset)
+{
+ int stripe_width_out = (pad_left + stripe_width_inp +
+ pad_right - column_offset) * phase_step;
+
+ stripe_width_out = (stripe_width_out + phase_init) / fir_phases;
+
+ return stripe_width_out - (fir_taps - 1);
+}
+
+struct ipu3_css_reso {
+ unsigned int input_width;
+ unsigned int input_height;
+ enum imgu_abi_frame_format input_format;
+ unsigned int pin_width[IMGU_ABI_OSYS_PINS];
+ unsigned int pin_height[IMGU_ABI_OSYS_PINS];
+ unsigned int pin_stride[IMGU_ABI_OSYS_PINS];
+ enum imgu_abi_frame_format pin_format[IMGU_ABI_OSYS_PINS];
+ int chunk_width;
+ int chunk_height;
+ int block_height;
+ int block_width;
+};
+
+struct ipu3_css_frame_params {
+ /* Output pins */
+ unsigned int enable;
+ unsigned int format;
+ unsigned int flip;
+ unsigned int mirror;
+ unsigned int tiling;
+ unsigned int reduce_range;
+ unsigned int width;
+ unsigned int height;
+ unsigned int stride;
+ unsigned int scaled;
+ unsigned int crop_left;
+ unsigned int crop_top;
+};
+
+struct ipu3_css_stripe_params {
+ unsigned int processing_mode;
+ unsigned int phase_step;
+ unsigned int exp_shift;
+ unsigned int phase_init_left_y;
+ unsigned int phase_init_left_uv;
+ unsigned int phase_init_top_y;
+ unsigned int phase_init_top_uv;
+ unsigned int pad_left_y;
+ unsigned int pad_left_uv;
+ unsigned int pad_right_y;
+ unsigned int pad_right_uv;
+ unsigned int pad_top_y;
+ unsigned int pad_top_uv;
+ unsigned int pad_bottom_y;
+ unsigned int pad_bottom_uv;
+ unsigned int crop_left_y;
+ unsigned int crop_top_y;
+ unsigned int crop_left_uv;
+ unsigned int crop_top_uv;
+ unsigned int start_column_y;
+ unsigned int start_column_uv;
+ unsigned int chunk_width;
+ unsigned int chunk_height;
+ unsigned int block_width;
+ unsigned int block_height;
+ unsigned int input_width;
+ unsigned int input_height;
+ int output_width[IMGU_ABI_OSYS_PINS];
+ int output_height[IMGU_ABI_OSYS_PINS];
+ int output_offset[IMGU_ABI_OSYS_PINS];
+};
+
+/*
+ * frame_params - size IMGU_ABI_OSYS_PINS
+ * stripe_params - size IPU3_UAPI_MAX_STRIPES
+ */
+static int ipu3_css_osys_calc_frame_and_stripe_params(
+ struct ipu3_css *css, unsigned int stripes,
+ struct imgu_abi_osys_config *osys,
+ struct ipu3_css_scaler_info *scaler_luma,
+ struct ipu3_css_scaler_info *scaler_chroma,
+ struct ipu3_css_frame_params frame_params[],
+ struct ipu3_css_stripe_params stripe_params[])
+{
+ u32 input_width = css->rect[IPU3_CSS_RECT_GDC].width;
+ u32 input_height = css->rect[IPU3_CSS_RECT_GDC].height;
+ u32 target_width = css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ u32 target_height = css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ unsigned int procmode = 0;
+ struct ipu3_css_reso reso;
+ unsigned int output_width, pin, s;
+
+ /* Frame parameters */
+
+ /* Input width for Output System is output width of DVS (with GDC) */
+ reso.input_width = css->rect[IPU3_CSS_RECT_GDC].width;
+
+ /* Input height for Output System is output height of DVS (with GDC) */
+ reso.input_height = css->rect[IPU3_CSS_RECT_GDC].height;
+
+ reso.input_format =
+ css->queue[IPU3_CSS_QUEUE_OUT].css_fmt->frame_format;
+
+ reso.pin_width[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ reso.pin_height[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ reso.pin_stride[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].width_pad;
+ reso.pin_format[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].css_fmt->frame_format;
+
+ reso.pin_width[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ reso.pin_height[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ reso.pin_stride[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].width_pad;
+ reso.pin_format[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].css_fmt->frame_format;
+
+ /* Configure the frame parameters for all output pins */
+
+ frame_params[IMGU_ABI_OSYS_PIN_OUT].width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ frame_params[IMGU_ABI_OSYS_PIN_OUT].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].width =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].height =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_top = 0;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_left = 0;
+
+ for (pin = 0; pin < IMGU_ABI_OSYS_PINS; pin++) {
+ int enable = 0;
+ int scaled = 0;
+ unsigned int format = 0;
+ unsigned int tiling = 0;
+
+ frame_params[pin].flip = 0;
+ frame_params[pin].mirror = 0;
+ frame_params[pin].reduce_range = 0;
+ if (reso.pin_width[pin] != 0 && reso.pin_height[pin] != 0) {
+ enable = 1;
+ if (pin == IMGU_ABI_OSYS_PIN_OUT) {
+ if (reso.input_width < reso.pin_width[pin] ||
+ reso.input_height < reso.pin_height[pin])
+ return -EINVAL;
+ /*
+ * When input and output resolution is
+ * different instead of scaling, cropping
+ * should happen. Determine the crop factor
+ * to do the symmetric cropping
+ */
+ frame_params[pin].crop_left = roundclosest_down(
+ (reso.input_width -
+ reso.pin_width[pin]) / 2,
+ IMGU_OSYS_DMA_CROP_W_LIMIT);
+ frame_params[pin].crop_top = roundclosest_down(
+ (reso.input_height -
+ reso.pin_height[pin]) / 2,
+ IMGU_OSYS_DMA_CROP_H_LIMIT);
+ } else {
+ if (reso.pin_width[pin] != reso.input_width ||
+ reso.pin_height[pin] != reso.input_height) {
+ /*
+ * If resolution is different at input
+ * and output of OSYS, scaling is
+ * considered except when pin is MAIN.
+ * Later it will be decide whether
+ * scaler factor is 1 or other
+ * and cropping has to be done or not.
+ */
+ scaled = 1;
+ }
+ }
+ ipu3_css_osys_set_format(reso.pin_format[pin], &format,
+ &tiling);
+ } else {
+ enable = 0;
+ }
+ frame_params[pin].enable = enable;
+ frame_params[pin].format = format;
+ frame_params[pin].tiling = tiling;
+ frame_params[pin].stride = reso.pin_stride[pin];
+ frame_params[pin].scaled = scaled;
+ }
+
+ ipu3_css_scaler_calc(input_width, input_height, target_width,
+ target_height, osys, scaler_luma, scaler_chroma,
+ &reso.pin_width[IMGU_ABI_OSYS_PIN_VF],
+ &reso.pin_height[IMGU_ABI_OSYS_PIN_VF], &procmode);
+ dev_dbg(css->dev, "osys scaler procmode is %u", procmode);
+ output_width = reso.pin_width[IMGU_ABI_OSYS_PIN_VF];
+
+ if (output_width < reso.input_width / 2) {
+ /* Scaling factor <= 0.5 */
+ reso.chunk_width = IMGU_OSYS_BLOCK_WIDTH;
+ reso.block_width = IMGU_OSYS_BLOCK_WIDTH;
+ } else { /* 0.5 <= Scaling factor <= 1.0 */
+ reso.chunk_width = IMGU_OSYS_BLOCK_WIDTH / 2;
+ reso.block_width = IMGU_OSYS_BLOCK_WIDTH;
+ }
+
+ if (output_width <= reso.input_width * 7 / 8) {
+ /* Scaling factor <= 0.875 */
+ reso.chunk_height = IMGU_OSYS_BLOCK_HEIGHT;
+ reso.block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ } else { /* 1.0 <= Scaling factor <= 1.75 */
+ reso.chunk_height = IMGU_OSYS_BLOCK_HEIGHT / 2;
+ reso.block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ }
+
+ /*
+ * Calculate scaler configuration parameters based on input and output
+ * resolution.
+ */
+
+ if (frame_params[IMGU_ABI_OSYS_PIN_VF].enable) {
+ /*
+ * When aspect ratio is different between target resolution and
+ * required resolution, determine the crop factor to do
+ * symmetric cropping
+ */
+ u32 w = reso.pin_width[IMGU_ABI_OSYS_PIN_VF] -
+ frame_params[IMGU_ABI_OSYS_PIN_VF].width;
+ u32 h = reso.pin_height[IMGU_ABI_OSYS_PIN_VF] -
+ frame_params[IMGU_ABI_OSYS_PIN_VF].height;
+
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_left =
+ roundclosest_down(w / 2, IMGU_OSYS_DMA_CROP_W_LIMIT);
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_top =
+ roundclosest_down(h / 2, IMGU_OSYS_DMA_CROP_H_LIMIT);
+
+ if (reso.input_height % 4 || reso.input_width % 8) {
+ dev_err(css->dev, "OSYS input width is not multiple of 8 or\n");
+ dev_err(css->dev, "height is not multiple of 4\n");
+ return -EINVAL;
+ }
+ }
+
+ /* Stripe parameters */
+
+ if (frame_params[IMGU_ABI_OSYS_PIN_VF].enable) {
+ output_width = reso.pin_width[IMGU_ABI_OSYS_PIN_VF];
+ } else {
+ /*
+ * in case scaler output is not enabled
+ * take output width as input width since
+ * there is no scaling at main pin.
+ * Due to the fact that main pin can be different
+ * from input resolution to osys in the case of cropping,
+ * main pin resolution is not taken.
+ */
+ output_width = reso.input_width;
+ }
+
+ for (s = 0; s < stripes; s++) {
+ int stripe_offset_inp_y = 0;
+ int stripe_offset_inp_uv = 0;
+ int stripe_offset_out_y = 0;
+ int stripe_offset_out_uv = 0;
+ int stripe_phase_init_y = scaler_luma->phase_init;
+ int stripe_phase_init_uv = scaler_chroma->phase_init;
+ int stripe_offset_blk_y = 0;
+ int stripe_offset_blk_uv = 0;
+ int stripe_offset_col_y = 0;
+ int stripe_offset_col_uv = 0;
+ int stripe_pad_left_y = scaler_luma->pad_left;
+ int stripe_pad_left_uv = scaler_chroma->pad_left;
+ int stripe_pad_right_y = scaler_luma->pad_right;
+ int stripe_pad_right_uv = scaler_chroma->pad_right;
+ int stripe_crop_left_y = scaler_luma->crop_left;
+ int stripe_crop_left_uv = scaler_chroma->crop_left;
+ int stripe_input_width_y = reso.input_width;
+ int stripe_input_width_uv = 0;
+ int stripe_output_width_y = output_width;
+ int stripe_output_width_uv = 0;
+ int chunk_floor_y = 0;
+ int chunk_floor_uv = 0;
+ int chunk_ceil_uv = 0;
+
+ if (stripes > 1) {
+ if (s > 0) {
+ /* Calculate stripe offsets */
+ stripe_offset_out_y =
+ output_width * s / stripes;
+ stripe_offset_out_y =
+ rounddown(stripe_offset_out_y,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ stripe_offset_out_uv = stripe_offset_out_y /
+ IMGU_LUMA_TO_CHROMA_RATIO;
+ stripe_offset_inp_y =
+ ipu3_css_osys_calc_stripe_offset(
+ stripe_offset_out_y,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_luma->phase_init,
+ scaler_luma->phase_step,
+ scaler_luma->pad_left);
+ stripe_offset_inp_uv =
+ ipu3_css_osys_calc_stripe_offset(
+ stripe_offset_out_uv,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_chroma->phase_init,
+ scaler_chroma->phase_step,
+ scaler_chroma->pad_left);
+
+ /* Calculate stripe phase init */
+ stripe_phase_init_y =
+ ipu3_css_osys_calc_stripe_phase_init(
+ stripe_offset_out_y,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_luma->phase_init,
+ scaler_luma->phase_step,
+ scaler_luma->pad_left);
+ stripe_phase_init_uv =
+ ipu3_css_osys_calc_stripe_phase_init(
+ stripe_offset_out_uv,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_chroma->phase_init,
+ scaler_chroma->phase_step,
+ scaler_chroma->pad_left);
+
+ /*
+ * Chunk boundary corner case - luma and chroma
+ * start from different input chunks.
+ */
+ chunk_floor_y = rounddown(stripe_offset_inp_y,
+ reso.chunk_width);
+ chunk_floor_uv =
+ rounddown(stripe_offset_inp_uv,
+ reso.chunk_width /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+
+ if (chunk_floor_y != chunk_floor_uv *
+ IMGU_LUMA_TO_CHROMA_RATIO) {
+ /*
+ * Match starting luma/chroma chunks.
+ * Decrease offset for UV and add output
+ * cropping.
+ */
+ stripe_offset_inp_uv -= 1;
+ stripe_crop_left_uv += 1;
+ stripe_phase_init_uv -=
+ scaler_luma->phase_step;
+ if (stripe_phase_init_uv < 0)
+ stripe_phase_init_uv =
+ stripe_phase_init_uv +
+ IMGU_OSYS_FIR_PHASES;
+ }
+ /*
+ * FW workaround for a HW bug: if the first
+ * chroma pixel is generated exactly at the end
+ * of chunck scaler HW may not output the pixel
+ * for downscale factors smaller than 1.5
+ * (timing issue).
+ */
+ chunk_ceil_uv =
+ roundup(stripe_offset_inp_uv,
+ reso.chunk_width /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+
+ if (stripe_offset_inp_uv ==
+ chunk_ceil_uv - IMGU_OSYS_TAPS_UV) {
+ /*
+ * Decrease input offset and add
+ * output cropping
+ */
+ stripe_offset_inp_uv -= 1;
+ stripe_phase_init_uv -=
+ scaler_luma->phase_step;
+ if (stripe_phase_init_uv < 0) {
+ stripe_phase_init_uv +=
+ IMGU_OSYS_FIR_PHASES;
+ stripe_crop_left_uv += 1;
+ }
+ }
+
+ /*
+ * Calculate block and column offsets for the
+ * input stripe
+ */
+ stripe_offset_blk_y =
+ rounddown(stripe_offset_inp_y,
+ IMGU_INPUT_BLOCK_WIDTH);
+ stripe_offset_blk_uv =
+ rounddown(stripe_offset_inp_uv,
+ IMGU_INPUT_BLOCK_WIDTH /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+ stripe_offset_col_y = stripe_offset_inp_y -
+ stripe_offset_blk_y;
+ stripe_offset_col_uv = stripe_offset_inp_uv -
+ stripe_offset_blk_uv;
+
+ /* Left padding is only for the first stripe */
+ stripe_pad_left_y = 0;
+ stripe_pad_left_uv = 0;
+ }
+
+ /* Right padding is only for the last stripe */
+ if (s < stripes - 1) {
+ int next_offset;
+
+ stripe_pad_right_y = 0;
+ stripe_pad_right_uv = 0;
+
+ next_offset = output_width * (s + 1) / stripes;
+ next_offset = rounddown(next_offset, 64);
+ stripe_output_width_y = next_offset -
+ stripe_offset_out_y;
+ } else {
+ stripe_output_width_y = output_width -
+ stripe_offset_out_y;
+ }
+
+ /* Calculate target output stripe width */
+ stripe_output_width_uv = stripe_output_width_y /
+ IMGU_LUMA_TO_CHROMA_RATIO;
+ /* Calculate input stripe width */
+ stripe_input_width_y = stripe_offset_col_y +
+ ipu3_css_osys_calc_inp_stripe_width(
+ stripe_output_width_y,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_y,
+ scaler_luma->phase_step,
+ IMGU_OSYS_TAPS_Y,
+ stripe_pad_left_y,
+ stripe_pad_right_y);
+
+ stripe_input_width_uv = stripe_offset_col_uv +
+ ipu3_css_osys_calc_inp_stripe_width(
+ stripe_output_width_uv,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_uv,
+ scaler_chroma->phase_step,
+ IMGU_OSYS_TAPS_UV,
+ stripe_pad_left_uv,
+ stripe_pad_right_uv);
+
+ stripe_input_width_uv = max(DIV_ROUND_UP(
+ stripe_input_width_y,
+ IMGU_LUMA_TO_CHROMA_RATIO),
+ stripe_input_width_uv);
+
+ stripe_input_width_y = stripe_input_width_uv *
+ IMGU_LUMA_TO_CHROMA_RATIO;
+
+ if (s >= stripes - 1) {
+ stripe_input_width_y = reso.input_width -
+ stripe_offset_blk_y;
+ /*
+ * The scaler requires that the last stripe
+ * spans at least two input blocks.
+ */
+ }
+
+ /*
+ * Spec: input stripe width must be a multiple of 8.
+ * Increase the input width and recalculate the output
+ * width. This may produce an extra column of junk
+ * blocks which will be overwritten by the
+ * next stripe.
+ */
+ stripe_input_width_y = ALIGN(stripe_input_width_y, 8);
+ stripe_output_width_y =
+ ipu3_css_osys_out_stripe_width(
+ stripe_input_width_y,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_y,
+ scaler_luma->phase_step,
+ IMGU_OSYS_TAPS_Y,
+ stripe_pad_left_y,
+ stripe_pad_right_y,
+ stripe_offset_col_y);
+
+ stripe_output_width_y =
+ rounddown(stripe_output_width_y,
+ IMGU_LUMA_TO_CHROMA_RATIO);
+ }
+ /*
+ * Following section executes and process parameters
+ * for both cases - Striping or No Striping.
+ */
+ {
+ unsigned int i;
+ int pin_scale = 0;
+ /*Input resolution */
+
+ stripe_params[s].input_width = stripe_input_width_y;
+ stripe_params[s].input_height = reso.input_height;
+
+ for (i = 0; i < IMGU_ABI_OSYS_PINS; i++) {
+ if (frame_params[i].scaled) {
+ /*
+ * Output stripe resolution and offset
+ * as produced by the scaler; actual
+ * output resolution may be slightly
+ * smaller.
+ */
+ stripe_params[s].output_width[i] =
+ stripe_output_width_y;
+ stripe_params[s].output_height[i] =
+ reso.pin_height[i];
+ stripe_params[s].output_offset[i] =
+ stripe_offset_out_y;
+
+ pin_scale += frame_params[i].scaled;
+ } else {
+ /* Unscaled pin */
+ stripe_params[s].output_width[i] =
+ stripe_params[s].input_width;
+ stripe_params[s].output_height[i] =
+ stripe_params[s].input_height;
+ stripe_params[s].output_offset[i] =
+ stripe_offset_blk_y;
+ }
+ }
+
+ /* If no pin use scale, we use BYPASS mode */
+ stripe_params[s].processing_mode = procmode;
+ stripe_params[s].phase_step = scaler_luma->phase_step;
+ stripe_params[s].exp_shift = scaler_luma->exp_shift;
+ stripe_params[s].phase_init_left_y =
+ stripe_phase_init_y;
+ stripe_params[s].phase_init_left_uv =
+ stripe_phase_init_uv;
+ stripe_params[s].phase_init_top_y =
+ scaler_luma->phase_init;
+ stripe_params[s].phase_init_top_uv =
+ scaler_chroma->phase_init;
+ stripe_params[s].pad_left_y = stripe_pad_left_y;
+ stripe_params[s].pad_left_uv = stripe_pad_left_uv;
+ stripe_params[s].pad_right_y = stripe_pad_right_y;
+ stripe_params[s].pad_right_uv = stripe_pad_right_uv;
+ stripe_params[s].pad_top_y = scaler_luma->pad_left;
+ stripe_params[s].pad_top_uv = scaler_chroma->pad_left;
+ stripe_params[s].pad_bottom_y = scaler_luma->pad_right;
+ stripe_params[s].pad_bottom_uv =
+ scaler_chroma->pad_right;
+ stripe_params[s].crop_left_y = stripe_crop_left_y;
+ stripe_params[s].crop_top_y = scaler_luma->crop_top;
+ stripe_params[s].crop_left_uv = stripe_crop_left_uv;
+ stripe_params[s].crop_top_uv = scaler_chroma->crop_top;
+ stripe_params[s].start_column_y = stripe_offset_col_y;
+ stripe_params[s].start_column_uv = stripe_offset_col_uv;
+ stripe_params[s].chunk_width = reso.chunk_width;
+ stripe_params[s].chunk_height = reso.chunk_height;
+ stripe_params[s].block_width = reso.block_width;
+ stripe_params[s].block_height = reso.block_height;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function configures the Output Formatter System, given the number of
+ * stripes, scaler luma and chrome parameters
+ */
+static void ipu3_css_osys_calc(struct ipu3_css *css, unsigned int stripes,
+ struct imgu_abi_osys_config *osys,
+ struct ipu3_css_scaler_info *scaler_luma,
+ struct ipu3_css_scaler_info *scaler_chroma,
+ struct imgu_abi_stripes block_stripes[])
+{
+ struct ipu3_css_frame_params frame_params[IMGU_ABI_OSYS_PINS];
+ struct ipu3_css_stripe_params stripe_params[IPU3_UAPI_MAX_STRIPES];
+ struct imgu_abi_osys_formatter_params *param;
+ unsigned int pin, s;
+
+ memset(osys, 0, sizeof(*osys));
+
+ /* Compute the frame and stripe params */
+ ipu3_css_osys_calc_frame_and_stripe_params(css, stripes, osys,
+ scaler_luma, scaler_chroma,
+ frame_params, stripe_params);
+
+ /* Output formatter system parameters */
+
+ for (s = 0; s < stripes; s++) {
+ struct imgu_abi_osys_scaler_params *scaler =
+ &osys->scaler[s].param;
+ int fifo_addr_fmt = IMGU_FIFO_ADDR_SCALER_TO_FMT;
+ int fifo_addr_ack = IMGU_FIFO_ADDR_SCALER_TO_SP;
+
+ /* OUTPUT 0 / PIN 0 is only Scaler output */
+ scaler->inp_buf_y_st_addr = IMGU_VMEM1_INP_BUF_ADDR;
+
+ /*
+ * = (IMGU_OSYS_BLOCK_WIDTH / IMGU_VMEM1_ELEMS_PER_VEC)
+ * = (2 * IPU3_UAPI_ISP_VEC_ELEMS) /
+ * (IMGU_HIVE_OF_SYS_OF_SYSTEM_NWAYS)
+ * = 2 * 64 / 32 = 4
+ */
+ scaler->inp_buf_y_line_stride = IMGU_VMEM1_Y_STRIDE;
+ /*
+ * = (IMGU_VMEM1_V_OFFSET + VMEM1_uv_size)
+ * = (IMGU_VMEM1_U_OFFSET + VMEM1_uv_size) +
+ * (VMEM1_y_size / 4)
+ * = (VMEM1_y_size) + (VMEM1_y_size / 4) +
+ * (IMGU_OSYS_BLOCK_HEIGHT * IMGU_VMEM1_Y_STRIDE)/4
+ * = (IMGU_OSYS_BLOCK_HEIGHT * IMGU_VMEM1_Y_STRIDE)
+ */
+ scaler->inp_buf_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->inp_buf_u_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ scaler->inp_buf_v_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ scaler->inp_buf_uv_line_stride = IMGU_VMEM1_UV_STRIDE;
+ scaler->inp_buf_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->inp_buf_chunk_width = stripe_params[s].chunk_width;
+ scaler->inp_buf_nr_buffers = IMGU_OSYS_NUM_INPUT_BUFFERS;
+
+ /* Output buffers */
+ scaler->out_buf_y_st_addr = IMGU_VMEM1_INT_BUF_ADDR;
+ scaler->out_buf_y_line_stride = stripe_params[s].block_width /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ scaler->out_buf_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->out_buf_u_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ scaler->out_buf_v_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ scaler->out_buf_uv_line_stride = stripe_params[s].block_width /
+ IMGU_VMEM1_ELEMS_PER_VEC / 2;
+ scaler->out_buf_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->out_buf_nr_buffers = IMGU_OSYS_NUM_INTERM_BUFFERS;
+
+ /* Intermediate buffers */
+ scaler->int_buf_y_st_addr = IMGU_VMEM2_BUF_Y_ADDR;
+ scaler->int_buf_y_line_stride = IMGU_VMEM2_BUF_Y_STRIDE;
+ scaler->int_buf_u_st_addr = IMGU_VMEM2_BUF_U_ADDR;
+ scaler->int_buf_v_st_addr = IMGU_VMEM2_BUF_V_ADDR;
+ scaler->int_buf_uv_line_stride = IMGU_VMEM2_BUF_UV_STRIDE;
+ scaler->int_buf_height = IMGU_VMEM2_LINES_PER_BLOCK;
+ scaler->int_buf_chunk_width = stripe_params[s].chunk_height;
+ scaler->int_buf_chunk_height = stripe_params[s].block_width;
+
+ /* Context buffers */
+ scaler->ctx_buf_hor_y_st_addr = IMGU_VMEM3_HOR_Y_ADDR;
+ scaler->ctx_buf_hor_u_st_addr = IMGU_VMEM3_HOR_U_ADDR;
+ scaler->ctx_buf_hor_v_st_addr = IMGU_VMEM3_HOR_V_ADDR;
+ scaler->ctx_buf_ver_y_st_addr = IMGU_VMEM3_VER_Y_ADDR;
+ scaler->ctx_buf_ver_u_st_addr = IMGU_VMEM3_VER_U_ADDR;
+ scaler->ctx_buf_ver_v_st_addr = IMGU_VMEM3_VER_V_ADDR;
+
+ /* Addresses for release-input and process-output tokens */
+ scaler->release_inp_buf_addr = fifo_addr_ack;
+ scaler->release_inp_buf_en = 1;
+ scaler->release_out_buf_en = 1;
+ scaler->process_out_buf_addr = fifo_addr_fmt;
+
+ /* Settings dimensions, padding, cropping */
+ scaler->input_image_y_width = stripe_params[s].input_width;
+ scaler->input_image_y_height = stripe_params[s].input_height;
+ scaler->input_image_y_start_column =
+ stripe_params[s].start_column_y;
+ scaler->input_image_uv_start_column =
+ stripe_params[s].start_column_uv;
+ scaler->input_image_y_left_pad = stripe_params[s].pad_left_y;
+ scaler->input_image_uv_left_pad = stripe_params[s].pad_left_uv;
+ scaler->input_image_y_right_pad = stripe_params[s].pad_right_y;
+ scaler->input_image_uv_right_pad =
+ stripe_params[s].pad_right_uv;
+ scaler->input_image_y_top_pad = stripe_params[s].pad_top_y;
+ scaler->input_image_uv_top_pad = stripe_params[s].pad_top_uv;
+ scaler->input_image_y_bottom_pad =
+ stripe_params[s].pad_bottom_y;
+ scaler->input_image_uv_bottom_pad =
+ stripe_params[s].pad_bottom_uv;
+ scaler->processing_mode = stripe_params[s].processing_mode;
+ scaler->scaling_ratio = stripe_params[s].phase_step;
+ scaler->y_left_phase_init = stripe_params[s].phase_init_left_y;
+ scaler->uv_left_phase_init =
+ stripe_params[s].phase_init_left_uv;
+ scaler->y_top_phase_init = stripe_params[s].phase_init_top_y;
+ scaler->uv_top_phase_init = stripe_params[s].phase_init_top_uv;
+ scaler->coeffs_exp_shift = stripe_params[s].exp_shift;
+ scaler->out_y_left_crop = stripe_params[s].crop_left_y;
+ scaler->out_uv_left_crop = stripe_params[s].crop_left_uv;
+ scaler->out_y_top_crop = stripe_params[s].crop_top_y;
+ scaler->out_uv_top_crop = stripe_params[s].crop_top_uv;
+
+ for (pin = 0; pin < IMGU_ABI_OSYS_PINS; pin++) {
+ int in_fifo_addr;
+ int out_fifo_addr;
+ int block_width_vecs;
+ int input_width_s;
+ int input_width_vecs;
+ int input_buf_y_st_addr;
+ int input_buf_u_st_addr;
+ int input_buf_v_st_addr;
+ int input_buf_y_line_stride;
+ int input_buf_uv_line_stride;
+ int output_buf_y_line_stride;
+ int output_buf_uv_line_stride;
+ int output_buf_nr_y_lines;
+ int block_height;
+ int block_width;
+ struct imgu_abi_osys_frame_params *fr_pr;
+
+ fr_pr = &osys->frame[pin].param;
+
+ /* Frame parameters */
+ fr_pr->enable = frame_params[pin].enable;
+ fr_pr->format = frame_params[pin].format;
+ fr_pr->mirror = frame_params[pin].mirror;
+ fr_pr->flip = frame_params[pin].flip;
+ fr_pr->tiling = frame_params[pin].tiling;
+ fr_pr->width = frame_params[pin].width;
+ fr_pr->height = frame_params[pin].height;
+ fr_pr->stride = frame_params[pin].stride;
+ fr_pr->scaled = frame_params[pin].scaled;
+
+ /* Stripe parameters */
+ osys->stripe[s].crop_top[pin] =
+ frame_params[pin].crop_top;
+ osys->stripe[s].input_width =
+ stripe_params[s].input_width;
+ osys->stripe[s].input_height =
+ stripe_params[s].input_height;
+ osys->stripe[s].block_height =
+ stripe_params[s].block_height;
+ osys->stripe[s].block_width =
+ stripe_params[s].block_width;
+ osys->stripe[s].output_width[pin] =
+ stripe_params[s].output_width[pin];
+ osys->stripe[s].output_height[pin] =
+ stripe_params[s].output_height[pin];
+
+ if (s == 0) {
+ /* Only first stripe should do left cropping */
+ osys->stripe[s].crop_left[pin] =
+ frame_params[pin].crop_left;
+ osys->stripe[s].output_offset[pin] =
+ stripe_params[s].output_offset[pin];
+ } else {
+ /*
+ * Stripe offset for other strips should be
+ * adjusted according to the cropping done
+ * at the first strip
+ */
+ osys->stripe[s].crop_left[pin] = 0;
+ osys->stripe[s].output_offset[pin] =
+ (stripe_params[s].output_offset[pin] -
+ osys->stripe[0].crop_left[pin]);
+ }
+
+ if (!frame_params[pin].enable)
+ continue;
+
+ /* Formatter: configurations */
+
+ /*
+ * Get the dimensions of the input blocks of the
+ * formatter, which is the same as the output
+ * blocks of the scaler.
+ */
+ if (frame_params[pin].scaled) {
+ block_height = stripe_params[s].block_height;
+ block_width = stripe_params[s].block_width;
+ } else {
+ block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ block_width = IMGU_OSYS_BLOCK_WIDTH;
+ }
+ block_width_vecs =
+ block_width / IMGU_VMEM1_ELEMS_PER_VEC;
+ /*
+ * The input/output line stride depends on the
+ * block size.
+ */
+ input_buf_y_line_stride = block_width_vecs;
+ input_buf_uv_line_stride = block_width_vecs / 2;
+ output_buf_y_line_stride = block_width_vecs;
+ output_buf_uv_line_stride = block_width_vecs / 2;
+ output_buf_nr_y_lines = block_height;
+ if (frame_params[pin].format ==
+ IMGU_ABI_OSYS_FORMAT_NV12 ||
+ frame_params[pin].format ==
+ IMGU_ABI_OSYS_FORMAT_NV21)
+ output_buf_uv_line_stride =
+ output_buf_y_line_stride;
+
+ /*
+ * Tiled outputs use a different output buffer
+ * configuration. The input (= scaler output) block
+ * width translates to a tile height, and the block
+ * height to the tile width. The default block size of
+ * 128x32 maps exactly onto a 4kB tile (512x8) for Y.
+ * For UV, the tile width is always half.
+ */
+ if (frame_params[pin].tiling) {
+ output_buf_nr_y_lines = 8;
+ output_buf_y_line_stride = 512 /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ output_buf_uv_line_stride = 256 /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ }
+
+ /*
+ * Store the output buffer line stride. Will be
+ * used to compute buffer offsets in boundary
+ * conditions when output blocks are partially
+ * outside the image.
+ */
+ osys->stripe[s].buf_stride[pin] =
+ output_buf_y_line_stride *
+ IMGU_HIVE_OF_SYS_OF_SYSTEM_NWAYS;
+ if (frame_params[pin].scaled) {
+ /*
+ * The input buffs are the intermediate
+ * buffers (scalers' output)
+ */
+ input_buf_y_st_addr = IMGU_VMEM1_INT_BUF_ADDR;
+ input_buf_u_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ input_buf_v_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ } else {
+ /*
+ * The input bufferss are the buffers
+ * filled by the SP
+ */
+ input_buf_y_st_addr = IMGU_VMEM1_INP_BUF_ADDR;
+ input_buf_u_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ input_buf_v_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ }
+
+ /*
+ * The formatter input width must be rounded to
+ * the block width. Otherwise the formatter will
+ * not recognize the end of the line, resulting
+ * in incorrect tiling (system may hang!) and
+ * possibly other problems.
+ */
+ input_width_s =
+ roundup(stripe_params[s].output_width[pin],
+ block_width);
+ input_width_vecs = input_width_s /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ out_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SP;
+ /*
+ * Process-output tokens must be sent to the SP.
+ * When scaling, the release-input tokens can be
+ * sent directly to the scaler, otherwise the
+ * formatter should send them to the SP.
+ */
+ if (frame_params[pin].scaled)
+ in_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SCALER;
+ else
+ in_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SP;
+
+ /* Formatter */
+ param = &osys->formatter[s][pin].param;
+
+ param->format = frame_params[pin].format;
+ param->flip = frame_params[pin].flip;
+ param->mirror = frame_params[pin].mirror;
+ param->tiling = frame_params[pin].tiling;
+ param->reduce_range = frame_params[pin].reduce_range;
+ param->alpha_blending = 0;
+ param->release_inp_addr = in_fifo_addr;
+ param->release_inp_en = 1;
+ param->process_out_buf_addr = out_fifo_addr;
+ param->image_width_vecs = input_width_vecs;
+ param->image_height_lines =
+ stripe_params[s].output_height[pin];
+ param->inp_buff_y_st_addr = input_buf_y_st_addr;
+ param->inp_buff_y_line_stride = input_buf_y_line_stride;
+ param->inp_buff_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ param->int_buff_u_st_addr = input_buf_u_st_addr;
+ param->int_buff_v_st_addr = input_buf_v_st_addr;
+ param->inp_buff_uv_line_stride =
+ input_buf_uv_line_stride;
+ param->inp_buff_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ param->out_buff_level = 0;
+ param->out_buff_nr_y_lines = output_buf_nr_y_lines;
+ param->out_buff_u_st_offset = IMGU_VMEM1_U_OFFSET;
+ param->out_buff_v_st_offset = IMGU_VMEM1_V_OFFSET;
+ param->out_buff_y_line_stride =
+ output_buf_y_line_stride;
+ param->out_buff_uv_line_stride =
+ output_buf_uv_line_stride;
+ param->hist_buff_st_addr = IMGU_VMEM1_HST_BUF_ADDR;
+ param->hist_buff_line_stride =
+ IMGU_VMEM1_HST_BUF_STRIDE;
+ param->hist_buff_nr_lines = IMGU_VMEM1_HST_BUF_NLINES;
+ }
+ }
+
+ block_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ block_stripes[0].width = stripe_params[0].input_width;
+ block_stripes[0].height = stripe_params[0].input_height;
+ } else {
+ struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ unsigned int sp_block_width = IPU3_UAPI_ISP_VEC_ELEMS *
+ bi->info.isp.sp.block.block_width;
+
+ block_stripes[0].width = roundup(stripe_params[0].input_width,
+ sp_block_width);
+ block_stripes[1].offset =
+ rounddown(css->rect[IPU3_CSS_RECT_GDC].width -
+ stripe_params[1].input_width, sp_block_width);
+ block_stripes[1].width =
+ roundup(css->rect[IPU3_CSS_RECT_GDC].width -
+ block_stripes[1].offset, sp_block_width);
+ block_stripes[0].height = css->rect[IPU3_CSS_RECT_GDC].height;
+ block_stripes[1].height = block_stripes[0].height;
+ }
+}
+
+/*********************** Mostly 3A operations ******************************/
+
+/*
+ * This function creates a "TO-DO list" (operations) for the sp code.
+ *
+ * There are 2 types of operations:
+ * 1. Transfer: Issue DMA transfer request for copying grid cells from DDR to
+ * accelerator space (NOTE that this space is limited) associated data:
+ * DDR address + accelerator's config set index(acc's address).
+ *
+ * 2. Issue "Process Lines Command" to shd accelerator
+ * associated data: #lines + which config set to use (actually, accelerator
+ * will use x AND (x+1)%num_of_sets - NOTE that this implies the restriction
+ * of not touching config sets x & (x+1)%num_of_sets when process_lines(x)
+ * is active).
+ *
+ * Basically there are 2 types of operations "chunks":
+ * 1. "initial chunk": Initially, we do as much transfers as we can (and need)
+ * [0 - max sets(3) ] followed by 1 or 2 "process lines" operations.
+ *
+ * 2. "regular chunk" - 1 transfer followed by 1 process line operation.
+ * (in some cases we might need additional transfer ate the last chunk).
+ *
+ * for some case:
+ * --> init
+ * tr (0)
+ * tr (1)
+ * tr (2)
+ * pl (0)
+ * pl (1)
+ * --> ack (0)
+ * tr (3)
+ * pl (2)
+ * --> ack (1)
+ * pl (3)
+ * --> ack (2)
+ * do nothing
+ * --> ack (3)
+ * do nothing
+ */
+
+static int
+ipu3_css_shd_ops_calc(struct imgu_abi_shd_intra_frame_operations_data *ops,
+ const struct ipu3_uapi_shd_grid_config *grid,
+ unsigned int image_height)
+{
+ unsigned int block_height = 1 << grid->block_height_log2;
+ unsigned int grid_height_per_slice = grid->grid_height_per_slice;
+ unsigned int set_height = grid_height_per_slice * block_height;
+
+ /* We currently support only abs(y_start) > grid_height_per_slice */
+ unsigned int positive_y_start = (unsigned int)-grid->y_start;
+ unsigned int first_process_lines =
+ set_height - (positive_y_start % set_height);
+ unsigned int last_set_height;
+ unsigned int num_of_sets;
+
+ struct imgu_abi_acc_operation *p_op;
+ struct imgu_abi_acc_process_lines_cmd_data *p_pl;
+ struct imgu_abi_shd_transfer_luts_set_data *p_tr;
+
+ unsigned int op_idx, pl_idx, tr_idx;
+ unsigned char tr_set_num, pl_cfg_set;
+
+ /*
+ * When the number of lines for the last process lines command
+ * is equal to a set height, we need another line of grid cell -
+ * additional transfer is required.
+ */
+ unsigned char last_tr = 0;
+
+ /* Add "process lines" command to the list of operations */
+ bool add_pl;
+ /* Add DMA xfer (config set) command to the list of ops */
+ bool add_tr;
+
+ /*
+ * Available partial grid (the part that fits into #IMGU_SHD_SETS sets)
+ * doesn't cover whole frame - need to process in chunks
+ */
+ if (image_height > first_process_lines) {
+ last_set_height =
+ (image_height - first_process_lines) % set_height;
+ num_of_sets = last_set_height > 0 ?
+ (image_height - first_process_lines) / set_height + 2 :
+ (image_height - first_process_lines) / set_height + 1;
+ last_tr = (set_height - last_set_height <= block_height ||
+ last_set_height == 0) ? 1 : 0;
+ } else { /* partial grid covers whole frame */
+ last_set_height = 0;
+ num_of_sets = 1;
+ first_process_lines = image_height;
+ last_tr = set_height - image_height <= block_height ? 1 : 0;
+ }
+
+ /* Init operations lists and counters */
+ p_op = ops->operation_list;
+ op_idx = 0;
+ p_pl = ops->process_lines_data;
+ pl_idx = 0;
+ p_tr = ops->transfer_data;
+ tr_idx = 0;
+
+ memset(ops, 0, sizeof(*ops));
+
+ /* Cyclic counters that holds config set number [0,IMGU_SHD_SETS) */
+ tr_set_num = 0;
+ pl_cfg_set = 0;
+
+ /*
+ * Always start with a transfer - process lines command must be
+ * initiated only after appropriate config sets are in place
+ * (2 configuration sets per process line command, except for last one).
+ */
+ add_pl = false;
+ add_tr = true;
+
+ while (add_pl || add_tr) {
+ /* Transfer ops */
+ if (add_tr) {
+ if (op_idx >= IMGU_ABI_SHD_MAX_OPERATIONS ||
+ tr_idx >= IMGU_ABI_SHD_MAX_TRANSFERS)
+ return -EINVAL;
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_TRANSFER_DATA;
+ p_op[op_idx].op_indicator = IMGU_ABI_ACC_OP_IDLE;
+ op_idx++;
+ p_tr[tr_idx].set_number = tr_set_num;
+ tr_idx++;
+ tr_set_num = (tr_set_num + 1) % IMGU_SHD_SETS;
+ }
+
+ /* Process-lines ops */
+ if (add_pl) {
+ if (op_idx >= IMGU_ABI_SHD_MAX_OPERATIONS ||
+ pl_idx >= IMGU_ABI_SHD_MAX_PROCESS_LINES)
+ return -EINVAL;
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+
+ /*
+ * In case we have 2 process lines commands -
+ * don't stop after the first one
+ */
+ if (pl_idx == 0 && num_of_sets != 1)
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ /*
+ * Initiate last process lines command -
+ * end of operation list.
+ */
+ else if (pl_idx == num_of_sets - 1)
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_OPS;
+ /*
+ * Intermediate process line command - end of operation
+ * "chunk" (meaning few "transfers" followed by few
+ * "process lines" commands).
+ */
+ else
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+
+ op_idx++;
+
+ /* first process line operation */
+ if (pl_idx == 0)
+ p_pl[pl_idx].lines = first_process_lines;
+ /* Last process line operation */
+ else if (pl_idx == num_of_sets - 1 &&
+ last_set_height > 0)
+ p_pl[pl_idx].lines = last_set_height;
+ else /* "regular" process lines operation */
+ p_pl[pl_idx].lines = set_height;
+
+ p_pl[pl_idx].cfg_set = pl_cfg_set;
+ pl_idx++;
+ pl_cfg_set = (pl_cfg_set + 1) % IMGU_SHD_SETS;
+ }
+
+ /*
+ * Initially, we always transfer
+ * min(IMGU_SHD_SETS, num_of_sets) - after that we fill in the
+ * corresponding process lines commands.
+ */
+ if (tr_idx == IMGU_SHD_SETS ||
+ tr_idx == num_of_sets + last_tr) {
+ add_tr = false;
+ add_pl = true;
+ }
+
+ /*
+ * We have finished the "initial" operations chunk -
+ * be ready to get more chunks.
+ */
+ if (pl_idx == 2) {
+ add_tr = true;
+ add_pl = true;
+ }
+
+ /* Stop conditions for each operation type */
+ if (tr_idx == num_of_sets + last_tr)
+ add_tr = false;
+ if (pl_idx == num_of_sets)
+ add_pl = false;
+ }
+
+ return 0;
+}
+
+/*
+ * The follow handshake procotol is the same for AF, AWB and AWB FR.
+ *
+ * for n sets of meta-data, the flow is:
+ * --> init
+ * process-lines (0)
+ * process-lines (1) eoc
+ * --> ack (0)
+ * read-meta-data (0)
+ * process-lines (2) eoc
+ * --> ack (1)
+ * read-meta-data (1)
+ * process-lines (3) eoc
+ * ...
+ *
+ * --> ack (n-3)
+ * read-meta-data (n-3)
+ * process-lines (n-1) eoc
+ * --> ack (n-2)
+ * read-meta-data (n-2) eoc
+ * --> ack (n-1)
+ * read-meta-data (n-1) eof
+ *
+ * for 2 sets we get:
+ * --> init
+ * pl (0)
+ * pl (1) eoc
+ * --> ack (0)
+ * pl (2) - rest of image, if applicable)
+ * rmd (0) eoc
+ * --> ack (1)
+ * rmd (1) eof
+ * --> (ack (2))
+ * do nothing
+ *
+ * for only one set:
+ *
+ * --> init
+ * pl(0) eoc
+ * --> ack (0)
+ * rmd (0) eof
+ *
+ * grid smaller than image case
+ * for example 128x128 grid (block size 8x8, 16x16 num of blocks)
+ * start at (0,0)
+ * 1st set holds 160 cells - 10 blocks vertical, 16 horizontal
+ * => 1st process lines = 80
+ * we're left with 128-80=48 lines (6 blocks vertical)
+ * => 2nd process lines = 48
+ * last process lines to cover the image - image_height - 128
+ *
+ * --> init
+ * pl (0) first
+ * pl (1) last-in-grid
+ * --> ack (0)
+ * rmd (0)
+ * pl (2) after-grid
+ * --> ack (1)
+ * rmd (1) eof
+ * --> ack (2)
+ * do nothing
+ */
+struct process_lines {
+ unsigned int image_height;
+ unsigned short grid_height;
+ unsigned short block_height;
+ unsigned short y_start;
+ unsigned char grid_height_per_slice;
+
+ unsigned short max_op; /* max operation */
+ unsigned short max_tr; /* max transaction */
+ unsigned char acc_enable;
+};
+
+/* Helper to config intra_frame_operations_data. */
+static int
+ipu3_css_acc_process_lines(const struct process_lines *pl,
+ struct imgu_abi_acc_operation *p_op,
+ struct imgu_abi_acc_process_lines_cmd_data *p_pl,
+ struct imgu_abi_acc_transfer_op_data *p_tr)
+{
+ unsigned short op_idx = 0, pl_idx = 0, tr_idx = 0;
+ unsigned char tr_set_num = 0, pl_cfg_set = 0;
+ const unsigned short grid_last_line =
+ pl->y_start + pl->grid_height * pl->block_height;
+ const unsigned short process_lines =
+ pl->grid_height_per_slice * pl->block_height;
+
+ unsigned int process_lines_after_grid;
+ unsigned short first_process_lines;
+ unsigned short last_process_lines_in_grid;
+
+ unsigned short num_of_process_lines;
+ unsigned short num_of_sets;
+
+ if (pl->grid_height_per_slice == 0)
+ return -EINVAL;
+
+ if (pl->acc_enable && grid_last_line > pl->image_height)
+ return -EINVAL;
+
+ num_of_sets = pl->grid_height / pl->grid_height_per_slice;
+ if (num_of_sets * pl->grid_height_per_slice < pl->grid_height)
+ num_of_sets++;
+
+ /* Account for two line delay inside the FF */
+ if (pl->max_op == IMGU_ABI_AF_MAX_OPERATIONS) {
+ first_process_lines = process_lines + pl->y_start + 2;
+ last_process_lines_in_grid =
+ (grid_last_line - first_process_lines) -
+ ((num_of_sets - 2) * process_lines) + 4;
+ process_lines_after_grid =
+ pl->image_height - grid_last_line - 4;
+ } else {
+ first_process_lines = process_lines + pl->y_start;
+ last_process_lines_in_grid =
+ (grid_last_line - first_process_lines) -
+ ((num_of_sets - 2) * process_lines);
+ process_lines_after_grid = pl->image_height - grid_last_line;
+ }
+
+ num_of_process_lines = num_of_sets;
+ if (process_lines_after_grid > 0)
+ num_of_process_lines++;
+
+ while (tr_idx < num_of_sets || pl_idx < num_of_process_lines) {
+ /* Read meta-data */
+ if (pl_idx >= 2 || (pl_idx == 1 && num_of_sets == 1)) {
+ if (op_idx >= pl->max_op || tr_idx >= pl->max_tr)
+ return -EINVAL;
+
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_TRANSFER_DATA;
+
+ if (tr_idx == num_of_sets - 1)
+ /* The last operation is always a tr */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_OPS;
+ else if (tr_idx == num_of_sets - 2)
+ if (process_lines_after_grid == 0)
+ /*
+ * No additional pl op left -
+ * this op is left as lats of cycle
+ */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+ else
+ /*
+ * We still have to process-lines after
+ * the grid so have one more pl op
+ */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ else
+ /* Default - usually there's a pl after a tr */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+
+ op_idx++;
+ if (p_tr) {
+ p_tr[tr_idx].set_number = tr_set_num;
+ tr_set_num = 1 - tr_set_num;
+ }
+ tr_idx++;
+ }
+
+ /* process_lines */
+ if (pl_idx < num_of_process_lines) {
+ if (op_idx >= pl->max_op || pl_idx >= pl->max_tr)
+ return -EINVAL;
+
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+ if (pl_idx == 0)
+ if (num_of_process_lines == 1)
+ /* Only one pl op */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+ else
+ /* On init - do two pl ops */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ else
+ /* Usually pl is the end of the ack cycle */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+
+ op_idx++;
+
+ if (pl_idx == 0)
+ /* First process line */
+ p_pl[pl_idx].lines = first_process_lines;
+ else if (pl_idx == num_of_sets - 1)
+ /* Last in grid */
+ p_pl[pl_idx].lines = last_process_lines_in_grid;
+ else if (pl_idx == num_of_process_lines - 1)
+ /* After the grid */
+ p_pl[pl_idx].lines = process_lines_after_grid;
+ else
+ /* Inside the grid */
+ p_pl[pl_idx].lines = process_lines;
+
+ if (p_tr) {
+ p_pl[pl_idx].cfg_set = pl_cfg_set;
+ pl_cfg_set = 1 - pl_cfg_set;
+ }
+ pl_idx++;
+ }
+ }
+
+ return 0;
+}
+
+static int ipu3_css_af_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_af_config *af_config)
+{
+ struct imgu_abi_af_intra_frame_operations_data *to =
+ &af_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = af_config->config.grid_cfg.height,
+ .block_height =
+ 1 << af_config->config.grid_cfg.block_height_log2,
+ .y_start = af_config->config.grid_cfg.y_start &
+ IPU3_UAPI_GRID_START_MASK,
+ .grid_height_per_slice =
+ af_config->stripes[0].grid_cfg.height_per_slice,
+ .max_op = IMGU_ABI_AF_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AF_MAX_TRANSFERS,
+ .acc_enable = bi->info.isp.sp.enable.af,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ NULL);
+}
+
+static int
+ipu3_css_awb_fr_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_awb_fr_config *awb_fr_config)
+{
+ struct imgu_abi_awb_fr_intra_frame_operations_data *to =
+ &awb_fr_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = awb_fr_config->config.grid_cfg.height,
+ .block_height =
+ 1 << awb_fr_config->config.grid_cfg.block_height_log2,
+ .y_start = awb_fr_config->config.grid_cfg.y_start &
+ IPU3_UAPI_GRID_START_MASK,
+ .grid_height_per_slice =
+ awb_fr_config->stripes[0].grid_cfg.height_per_slice,
+ .max_op = IMGU_ABI_AWB_FR_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AWB_FR_MAX_PROCESS_LINES,
+ .acc_enable = bi->info.isp.sp.enable.awb_fr_acc,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ NULL);
+}
+
+static int ipu3_css_awb_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_awb_config *awb_config)
+{
+ struct imgu_abi_awb_intra_frame_operations_data *to =
+ &awb_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = awb_config->config.grid.height,
+ .block_height =
+ 1 << awb_config->config.grid.block_height_log2,
+ .y_start = awb_config->config.grid.y_start,
+ .grid_height_per_slice =
+ awb_config->stripes[0].grid.height_per_slice,
+ .max_op = IMGU_ABI_AWB_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AWB_MAX_TRANSFERS,
+ .acc_enable = bi->info.isp.sp.enable.awb_acc,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ to->transfer_data);
+}
+
+static u16 ipu3_css_grid_end(u16 start, u8 width, u8 block_width_log2)
+{
+ return (start & IPU3_UAPI_GRID_START_MASK) +
+ (width << block_width_log2) - 1;
+}
+
+static void ipu3_css_grid_end_calc(struct ipu3_uapi_grid_config *grid_cfg)
+{
+ grid_cfg->x_end = ipu3_css_grid_end(grid_cfg->x_start, grid_cfg->width,
+ grid_cfg->block_width_log2);
+ grid_cfg->y_end = ipu3_css_grid_end(grid_cfg->y_start, grid_cfg->height,
+ grid_cfg->block_height_log2);
+}
+
+/****************** config computation *****************************/
+
+static void ipu3_css_cfg_acc_stripe(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ const unsigned int stripes = bi->info.isp.sp.iterator.num_stripes;
+ const unsigned int F = IPU3_UAPI_ISP_VEC_ELEMS * 2;
+ struct ipu3_css_scaler_info scaler_luma, scaler_chroma;
+ unsigned int bds_ds, i;
+
+ memset(acc, 0, sizeof(*acc));
+
+ /* acc_param: osys_config */
+
+ ipu3_css_osys_calc(css, stripes, &acc->osys, &scaler_luma,
+ &scaler_chroma, acc->stripe.block_stripes);
+
+ /* acc_param: stripe data */
+
+ /*
+ * For the striped case the approach is as follows:
+ * 1. down-scaled stripes are calculated - with 128 overlap
+ * (this is the main limiter therefore it's first)
+ * 2. input stripes are derived by up-scaling the down-scaled stripes
+ * (there are no alignment requirements on input stripes)
+ * 3. output stripes are derived from down-scaled stripes too
+ */
+
+ acc->stripe.num_of_stripes = stripes;
+ acc->stripe.input_frame.width =
+ css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix.width;
+ acc->stripe.input_frame.height =
+ css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix.height;
+ acc->stripe.input_frame.bayer_order =
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order;
+
+ for (i = 0; i < stripes; i++)
+ acc->stripe.bds_out_stripes[i].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.bds_out_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ acc->stripe.bds_out_stripes[0].width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, F);
+ } else {
+ /* Image processing is divided into two stripes */
+ acc->stripe.bds_out_stripes[0].width =
+ acc->stripe.bds_out_stripes[1].width =
+ (css->rect[IPU3_CSS_RECT_BDS].width / 2 & ~(F - 1)) + F;
+ /*
+ * Sum of width of the two stripes should not be smaller
+ * than output width and must be even times of overlapping
+ * unit f.
+ */
+ if ((css->rect[IPU3_CSS_RECT_BDS].width / F & 1) !=
+ !!(css->rect[IPU3_CSS_RECT_BDS].width & (F - 1)))
+ acc->stripe.bds_out_stripes[0].width += F;
+ if ((css->rect[IPU3_CSS_RECT_BDS].width / F & 1) &&
+ (css->rect[IPU3_CSS_RECT_BDS].width & (F - 1))) {
+ acc->stripe.bds_out_stripes[0].width += F;
+ acc->stripe.bds_out_stripes[1].width += F;
+ }
+ /* Overlap between stripes is IPU3_UAPI_ISP_VEC_ELEMS * 4 */
+ acc->stripe.bds_out_stripes[1].offset =
+ acc->stripe.bds_out_stripes[0].width - 2 * F;
+ }
+
+ acc->stripe.effective_stripes[0].height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->stripe.effective_stripes[0].offset = 0;
+ acc->stripe.bds_out_stripes_no_overlap[0].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.bds_out_stripes_no_overlap[0].offset = 0;
+ acc->stripe.output_stripes[0].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.output_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ acc->stripe.down_scaled_stripes[0].width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->stripe.down_scaled_stripes[0].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.down_scaled_stripes[0].offset = 0;
+
+ acc->stripe.effective_stripes[0].width =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width;
+ acc->stripe.bds_out_stripes_no_overlap[0].width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, F);
+
+ acc->stripe.output_stripes[0].width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ } else { /* Two stripes */
+ bds_ds = css->rect[IPU3_CSS_RECT_EFFECTIVE].width *
+ IMGU_BDS_GRANULARITY /
+ css->rect[IPU3_CSS_RECT_BDS].width;
+
+ acc->stripe.down_scaled_stripes[0] =
+ acc->stripe.bds_out_stripes[0];
+ acc->stripe.down_scaled_stripes[1] =
+ acc->stripe.bds_out_stripes[1];
+ if (!IS_ALIGNED(css->rect[IPU3_CSS_RECT_BDS].width, F))
+ acc->stripe.down_scaled_stripes[1].width += -F +
+ (css->rect[IPU3_CSS_RECT_BDS].width & (F - 1));
+
+ acc->stripe.effective_stripes[0].width = bds_ds *
+ acc->stripe.down_scaled_stripes[0].width /
+ IMGU_BDS_GRANULARITY;
+ acc->stripe.effective_stripes[1].width = bds_ds *
+ acc->stripe.down_scaled_stripes[1].width /
+ IMGU_BDS_GRANULARITY;
+ acc->stripe.effective_stripes[1].height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->stripe.effective_stripes[1].offset = bds_ds *
+ acc->stripe.down_scaled_stripes[1].offset /
+ IMGU_BDS_GRANULARITY;
+
+ acc->stripe.bds_out_stripes_no_overlap[0].width =
+ acc->stripe.bds_out_stripes_no_overlap[1].offset =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, 2 * F) / 2;
+ acc->stripe.bds_out_stripes_no_overlap[1].width =
+ DIV_ROUND_UP(css->rect[IPU3_CSS_RECT_BDS].width, F) /
+ 2 * F;
+ acc->stripe.bds_out_stripes_no_overlap[1].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+
+ acc->stripe.output_stripes[0].width =
+ acc->stripe.down_scaled_stripes[0].width - F;
+ acc->stripe.output_stripes[1].width =
+ acc->stripe.down_scaled_stripes[1].width - F;
+ acc->stripe.output_stripes[1].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.output_stripes[1].offset =
+ acc->stripe.output_stripes[0].width;
+ }
+
+ acc->stripe.output_system_in_frame_width =
+ css->rect[IPU3_CSS_RECT_GDC].width;
+ acc->stripe.output_system_in_frame_height =
+ css->rect[IPU3_CSS_RECT_GDC].height;
+
+ acc->stripe.effective_frame_width =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width;
+ acc->stripe.bds_frame_width = css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->stripe.out_frame_width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ acc->stripe.out_frame_height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.gdc_in_buffer_width =
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].bytesperline /
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].bytesperpixel;
+ acc->stripe.gdc_in_buffer_height =
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].height;
+ acc->stripe.gdc_in_buffer_offset_x = IMGU_GDC_BUF_X;
+ acc->stripe.gdc_in_buffer_offset_y = IMGU_GDC_BUF_Y;
+ acc->stripe.display_frame_width =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ acc->stripe.display_frame_height =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ acc->stripe.bds_aligned_frame_width =
+ roundup(css->rect[IPU3_CSS_RECT_BDS].width,
+ 2 * IPU3_UAPI_ISP_VEC_ELEMS);
+
+ if (stripes > 1)
+ acc->stripe.half_overlap_vectors =
+ IMGU_STRIPE_FIXED_HALF_OVERLAP;
+ else
+ acc->stripe.half_overlap_vectors = 0;
+}
+
+static void ipu3_css_cfg_acc_dvs(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc)
+{
+ unsigned int i;
+
+ /* Disable DVS statistics */
+ acc->dvs_stat.operations_data.process_lines_data[0].lines =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->dvs_stat.operations_data.process_lines_data[0].cfg_set = 0;
+ acc->dvs_stat.operations_data.ops[0].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+ acc->dvs_stat.operations_data.ops[0].op_indicator =
+ IMGU_ABI_ACC_OP_NO_OPS;
+ for (i = 0; i < IMGU_ABI_DVS_STAT_LEVELS; i++)
+ acc->dvs_stat.cfg.grd_config[i].enable = 0;
+}
+
+static void acc_bds_per_stripe_data(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc,
+ const int i)
+{
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_en = 0;
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_start = 0;
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_end = 0;
+ acc->bds.per_stripe.aligned_data[i].data.hor_ctrl0 =
+ acc->bds.hor.hor_ctrl0;
+ acc->bds.per_stripe.aligned_data[i].data.hor_ctrl0.out_frame_width =
+ acc->stripe.down_scaled_stripes[i].width;
+ acc->bds.per_stripe.aligned_data[i].data.ver_ctrl1.out_frame_width =
+ acc->stripe.down_scaled_stripes[i].width;
+ acc->bds.per_stripe.aligned_data[i].data.ver_ctrl1.out_frame_height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+}
+
+/*
+ * Configure `acc' parameters. `acc_old' contains the old values (or is NULL)
+ * and `acc_user' contains new prospective values. `use' contains flags
+ * telling which fields to take from the old values (or generate if it is NULL)
+ * and which to take from the new user values.
+ */
+int ipu3_css_cfg_acc(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ struct imgu_abi_acc_param *acc,
+ struct imgu_abi_acc_param *acc_old,
+ struct ipu3_uapi_acc_param *acc_user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ const unsigned int stripes = bi->info.isp.sp.iterator.num_stripes;
+ const unsigned int tnr_frame_width =
+ acc->stripe.bds_aligned_frame_width;
+ const unsigned int min_overlap = 10;
+ const struct v4l2_pix_format_mplane *pixm =
+ &css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix;
+ const struct ipu3_css_bds_config *cfg_bds;
+ struct imgu_abi_input_feeder_data *feeder_data;
+
+ unsigned int bds_ds, ofs_x, ofs_y, i, width, height;
+ u8 b_w_log2; /* Block width log2 */
+
+ /* Update stripe using chroma and luma */
+
+ ipu3_css_cfg_acc_stripe(css, acc);
+
+ /* acc_param: input_feeder_config */
+
+ ofs_x = ((pixm->width -
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width) >> 1) & ~1;
+ ofs_x += css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_RGGB ||
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_GBRG ? 1 : 0;
+ ofs_y = ((pixm->height -
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height) >> 1) & ~1;
+ ofs_y += css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_BGGR ||
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_GBRG ? 1 : 0;
+ acc->input_feeder.data.row_stride = pixm->plane_fmt[0].bytesperline;
+ acc->input_feeder.data.start_row_address =
+ ofs_x / IMGU_PIXELS_PER_WORD * IMGU_BYTES_PER_WORD +
+ ofs_y * acc->input_feeder.data.row_stride;
+ acc->input_feeder.data.start_pixel = ofs_x % IMGU_PIXELS_PER_WORD;
+
+ acc->input_feeder.data_per_stripe.input_feeder_data[0].data =
+ acc->input_feeder.data;
+
+ ofs_x += acc->stripe.effective_stripes[1].offset;
+
+ feeder_data =
+ &acc->input_feeder.data_per_stripe.input_feeder_data[1].data;
+ feeder_data->row_stride = acc->input_feeder.data.row_stride;
+ feeder_data->start_row_address =
+ ofs_x / IMGU_PIXELS_PER_WORD * IMGU_BYTES_PER_WORD +
+ ofs_y * acc->input_feeder.data.row_stride;
+ feeder_data->start_pixel = ofs_x % IMGU_PIXELS_PER_WORD;
+
+ /* acc_param: bnr_static_config */
+
+ /*
+ * Originate from user or be the original default values if user has
+ * never set them before, when user gives a new set of parameters,
+ * for each chunk in the parameter structure there is a flag use->xxx
+ * whether to use the user-provided parameter or not. If not, the
+ * parameter remains unchanged in the driver:
+ * it's value is taken from acc_old.
+ */
+ if (use && use->acc_bnr) {
+ /* Take values from user */
+ acc->bnr = acc_user->bnr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->bnr = acc_old->bnr;
+ } else {
+ /* Calculate from scratch */
+ acc->bnr = ipu3_css_bnr_defaults;
+ }
+
+ acc->bnr.column_size = tnr_frame_width;
+
+ /* acc_param: bnr_static_config_green_disparity */
+
+ if (use && use->acc_green_disparity) {
+ /* Take values from user */
+ acc->green_disparity = acc_user->green_disparity;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->green_disparity = acc_old->green_disparity;
+ } else {
+ /* Calculate from scratch */
+ memset(&acc->green_disparity, 0, sizeof(acc->green_disparity));
+ }
+
+ /* acc_param: dm_config */
+
+ if (use && use->acc_dm) {
+ /* Take values from user */
+ acc->dm = acc_user->dm;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->dm = acc_old->dm;
+ } else {
+ /* Calculate from scratch */
+ acc->dm = ipu3_css_dm_defaults;
+ }
+
+ acc->dm.frame_width = tnr_frame_width;
+
+ /* acc_param: ccm_mat_config */
+
+ if (use && use->acc_ccm) {
+ /* Take values from user */
+ acc->ccm = acc_user->ccm;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->ccm = acc_old->ccm;
+ } else {
+ /* Calculate from scratch */
+ acc->ccm = ipu3_css_ccm_defaults;
+ }
+
+ /* acc_param: gamma_config */
+
+ if (use && use->acc_gamma) {
+ /* Take values from user */
+ acc->gamma = acc_user->gamma;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->gamma = acc_old->gamma;
+ } else {
+ /* Calculate from scratch */
+ acc->gamma.gc_ctrl.enable = 1;
+ acc->gamma.gc_lut = ipu3_css_gamma_lut;
+ }
+
+ /* acc_param: csc_mat_config */
+
+ if (use && use->acc_csc) {
+ /* Take values from user */
+ acc->csc = acc_user->csc;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->csc = acc_old->csc;
+ } else {
+ /* Calculate from scratch */
+ acc->csc = ipu3_css_csc_defaults;
+ }
+
+ /* acc_param: cds_params */
+
+ if (use && use->acc_cds) {
+ /* Take values from user */
+ acc->cds = acc_user->cds;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->cds = acc_old->cds;
+ } else {
+ /* Calculate from scratch */
+ acc->cds = ipu3_css_cds_defaults;
+ }
+
+ /* acc_param: shd_config */
+
+ if (use && use->acc_shd) {
+ /* Take values from user */
+ acc->shd.shd = acc_user->shd.shd;
+ acc->shd.shd_lut = acc_user->shd.shd_lut;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->shd.shd = acc_old->shd.shd;
+ acc->shd.shd_lut = acc_old->shd.shd_lut;
+ } else {
+ /* Calculate from scratch */
+ acc->shd.shd = ipu3_css_shd_defaults;
+ memset(&acc->shd.shd_lut, 0, sizeof(acc->shd.shd_lut));
+ }
+
+ if (acc->shd.shd.grid.width <= 0)
+ return -EINVAL;
+
+ acc->shd.shd.grid.grid_height_per_slice =
+ IMGU_ABI_SHD_MAX_CELLS_PER_SET / acc->shd.shd.grid.width;
+
+ if (acc->shd.shd.grid.grid_height_per_slice <= 0)
+ return -EINVAL;
+
+ acc->shd.shd.general.init_set_vrt_offst_ul =
+ (-acc->shd.shd.grid.y_start >>
+ acc->shd.shd.grid.block_height_log2) %
+ acc->shd.shd.grid.grid_height_per_slice;
+
+ if (ipu3_css_shd_ops_calc(&acc->shd.shd_ops, &acc->shd.shd.grid,
+ css->rect[IPU3_CSS_RECT_BDS].height))
+ return -EINVAL;
+
+ /* acc_param: dvs_stat_config */
+ ipu3_css_cfg_acc_dvs(css, acc);
+
+ /* acc_param: yuvp1_iefd_config */
+
+ if (use && use->acc_iefd) {
+ /* Take values from user */
+ acc->iefd = acc_user->iefd;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->iefd = acc_old->iefd;
+ } else {
+ /* Calculate from scratch */
+ acc->iefd = ipu3_css_iefd_defaults;
+ }
+
+ /* acc_param: yuvp1_yds_config yds_c0 */
+
+ if (use && use->acc_yds_c0) {
+ /* Take values from user */
+ acc->yds_c0 = acc_user->yds_c0;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds_c0 = acc_old->yds_c0;
+ } else {
+ /* Calculate from scratch */
+ acc->yds_c0 = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp1_chnr_config chnr_c0 */
+
+ if (use && use->acc_chnr_c0) {
+ /* Take values from user */
+ acc->chnr_c0 = acc_user->chnr_c0;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->chnr_c0 = acc_old->chnr_c0;
+ } else {
+ /* Calculate from scratch */
+ acc->chnr_c0 = ipu3_css_chnr_defaults;
+ }
+
+ /* acc_param: yuvp1_y_ee_nr_config */
+
+ if (use && use->acc_y_ee_nr) {
+ /* Take values from user */
+ acc->y_ee_nr = acc_user->y_ee_nr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->y_ee_nr = acc_old->y_ee_nr;
+ } else {
+ /* Calculate from scratch */
+ acc->y_ee_nr = ipu3_css_y_ee_nr_defaults;
+ }
+
+ /* acc_param: yuvp1_yds_config yds */
+
+ if (use && use->acc_yds) {
+ /* Take values from user */
+ acc->yds = acc_user->yds;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds = acc_old->yds;
+ } else {
+ /* Calculate from scratch */
+ acc->yds = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp1_chnr_config chnr */
+
+ if (use && use->acc_chnr) {
+ /* Take values from user */
+ acc->chnr = acc_user->chnr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->chnr = acc_old->chnr;
+ } else {
+ /* Calculate from scratch */
+ acc->chnr = ipu3_css_chnr_defaults;
+ }
+
+ /* acc_param: yuvp2_y_tm_lut_static_config */
+
+ for (i = 0; i < IMGU_ABI_YUVP2_YTM_LUT_ENTRIES; i++)
+ acc->ytm.entries[i] = i * 32;
+ acc->ytm.enable = 0; /* Always disabled on IPU3 */
+
+ /* acc_param: yuvp1_yds_config yds2 */
+
+ if (use && use->acc_yds2) {
+ /* Take values from user */
+ acc->yds2 = acc_user->yds2;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds2 = acc_old->yds2;
+ } else {
+ /* Calculate from scratch */
+ acc->yds2 = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp2_tcc_static_config */
+
+ if (use && use->acc_tcc) {
+ /* Take values from user */
+ acc->tcc = acc_user->tcc;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->tcc = acc_old->tcc;
+ } else {
+ /* Calculate from scratch */
+ memset(&acc->tcc, 0, sizeof(acc->tcc));
+
+ acc->tcc.gen_control.en = 1;
+ acc->tcc.gen_control.blend_shift = 3;
+ acc->tcc.gen_control.gain_according_to_y_only = 1;
+ acc->tcc.gen_control.gamma = 8;
+ acc->tcc.gen_control.delta = 0;
+
+ for (i = 0; i < IPU3_UAPI_YUVP2_TCC_MACC_TABLE_ELEMENTS; i++) {
+ acc->tcc.macc_table.entries[i].a = 1024;
+ acc->tcc.macc_table.entries[i].b = 0;
+ acc->tcc.macc_table.entries[i].c = 0;
+ acc->tcc.macc_table.entries[i].d = 1024;
+ }
+
+ acc->tcc.inv_y_lut.entries[6] = 1023;
+ for (i = 7; i < IPU3_UAPI_YUVP2_TCC_INV_Y_LUT_ELEMENTS; i++)
+ acc->tcc.inv_y_lut.entries[i] = 1024 >> (i - 6);
+
+ acc->tcc.gain_pcwl = ipu3_css_tcc_gain_pcwl_lut;
+ acc->tcc.r_sqr_lut = ipu3_css_tcc_r_sqr_lut;
+ }
+
+ /* acc_param: dpc_config */
+
+ if (use && use->acc_dpc)
+ return -EINVAL; /* Not supported yet */
+
+ /* Just disable by default */
+ memset(&acc->dpc, 0, sizeof(acc->dpc));
+
+ /* acc_param: bds_config */
+
+ bds_ds = (css->rect[IPU3_CSS_RECT_EFFECTIVE].height *
+ IMGU_BDS_GRANULARITY) / css->rect[IPU3_CSS_RECT_BDS].height;
+ if (bds_ds < IMGU_BDS_MIN_SF_INV ||
+ bds_ds - IMGU_BDS_MIN_SF_INV >= ARRAY_SIZE(ipu3_css_bds_configs))
+ return -EINVAL;
+
+ cfg_bds = &ipu3_css_bds_configs[bds_ds - IMGU_BDS_MIN_SF_INV];
+ acc->bds.hor.hor_ctrl1.hor_crop_en = 0;
+ acc->bds.hor.hor_ctrl1.hor_crop_start = 0;
+ acc->bds.hor.hor_ctrl1.hor_crop_end = 0;
+ acc->bds.hor.hor_ctrl0.sample_patrn_length =
+ cfg_bds->sample_patrn_length;
+ acc->bds.hor.hor_ctrl0.hor_ds_en = cfg_bds->hor_ds_en;
+ acc->bds.hor.hor_ctrl0.min_clip_val = IMGU_BDS_MIN_CLIP_VAL;
+ acc->bds.hor.hor_ctrl0.max_clip_val = IMGU_BDS_MAX_CLIP_VAL;
+ acc->bds.hor.hor_ctrl0.out_frame_width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->bds.hor.hor_ptrn_arr = cfg_bds->ptrn_arr;
+ acc->bds.hor.hor_phase_arr = cfg_bds->hor_phase_arr;
+ acc->bds.hor.hor_ctrl2.input_frame_height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->bds.ver.ver_ctrl0.min_clip_val = IMGU_BDS_MIN_CLIP_VAL;
+ acc->bds.ver.ver_ctrl0.max_clip_val = IMGU_BDS_MAX_CLIP_VAL;
+ acc->bds.ver.ver_ctrl0.sample_patrn_length =
+ cfg_bds->sample_patrn_length;
+ acc->bds.ver.ver_ctrl0.ver_ds_en = cfg_bds->ver_ds_en;
+ acc->bds.ver.ver_ptrn_arr = cfg_bds->ptrn_arr;
+ acc->bds.ver.ver_phase_arr = cfg_bds->ver_phase_arr;
+ acc->bds.ver.ver_ctrl1.out_frame_width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->bds.ver.ver_ctrl1.out_frame_height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ for (i = 0; i < stripes; i++)
+ acc_bds_per_stripe_data(css, acc, i);
+
+ acc->bds.enabled = cfg_bds->hor_ds_en || cfg_bds->ver_ds_en;
+
+ /* acc_param: anr_config */
+
+ if (use && use->acc_anr) {
+ /* Take values from user */
+ acc->anr.transform = acc_user->anr.transform;
+ acc->anr.stitch.anr_stitch_en =
+ acc_user->anr.stitch.anr_stitch_en;
+ memcpy(acc->anr.stitch.pyramid, acc_user->anr.stitch.pyramid,
+ sizeof(acc->anr.stitch.pyramid));
+ } else if (acc_old) {
+ /* Use old value */
+ acc->anr.transform = acc_old->anr.transform;
+ acc->anr.stitch.anr_stitch_en =
+ acc_old->anr.stitch.anr_stitch_en;
+ memcpy(acc->anr.stitch.pyramid, acc_old->anr.stitch.pyramid,
+ sizeof(acc->anr.stitch.pyramid));
+ } else {
+ /* Calculate from scratch */
+ acc->anr = ipu3_css_anr_defaults;
+ }
+
+ /* Always enabled */
+ acc->anr.search.enable = 1;
+ acc->anr.transform.enable = 1;
+ acc->anr.tile2strm.enable = 1;
+ acc->anr.tile2strm.frame_width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ acc->anr.search.frame_width = acc->anr.tile2strm.frame_width;
+ acc->anr.stitch.frame_width = acc->anr.tile2strm.frame_width;
+ acc->anr.tile2strm.frame_height = css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->anr.search.frame_height = acc->anr.tile2strm.frame_height;
+ acc->anr.stitch.frame_height = acc->anr.tile2strm.frame_height;
+
+ width = ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ height = css->rect[IPU3_CSS_RECT_BDS].height;
+
+ if (acc->anr.transform.xreset + width > IPU3_UAPI_ANR_MAX_RESET)
+ acc->anr.transform.xreset = IPU3_UAPI_ANR_MAX_RESET - width;
+ if (acc->anr.transform.xreset < IPU3_UAPI_ANR_MIN_RESET)
+ acc->anr.transform.xreset = IPU3_UAPI_ANR_MIN_RESET;
+
+ if (acc->anr.transform.yreset + height > IPU3_UAPI_ANR_MAX_RESET)
+ acc->anr.transform.yreset = IPU3_UAPI_ANR_MAX_RESET - height;
+ if (acc->anr.transform.yreset < IPU3_UAPI_ANR_MIN_RESET)
+ acc->anr.transform.yreset = IPU3_UAPI_ANR_MIN_RESET;
+
+ /* acc_param: awb_fr_config */
+
+ if (use && use->acc_awb_fr) {
+ /* Take values from user */
+ acc->awb_fr.config = acc_user->awb_fr.config;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->awb_fr.config = acc_old->awb_fr.config;
+ } else {
+ /* Set from scratch */
+ acc->awb_fr.config = ipu3_css_awb_fr_defaults;
+ }
+
+ ipu3_css_grid_end_calc(&acc->awb_fr.config.grid_cfg);
+
+ if (acc->awb_fr.config.grid_cfg.width <= 0)
+ return -EINVAL;
+
+ acc->awb_fr.config.grid_cfg.height_per_slice =
+ IMGU_ABI_AWB_FR_MAX_CELLS_PER_SET /
+ acc->awb_fr.config.grid_cfg.width;
+
+ for (i = 0; i < stripes; i++)
+ acc->awb_fr.stripes[i] = acc->awb_fr.config;
+
+ if (acc->awb_fr.config.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->awb_fr.stripes[0].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else if (acc->awb_fr.config.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->awb_fr.stripes[1].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else {
+ /* Enable for both stripes */
+ u16 end; /* width for grid end */
+
+ acc->awb_fr.stripes[0].grid_cfg.width =
+ (acc->stripe.bds_out_stripes[0].width - min_overlap -
+ acc->awb_fr.config.grid_cfg.x_start + 1) >>
+ acc->awb_fr.config.grid_cfg.block_width_log2;
+ acc->awb_fr.stripes[1].grid_cfg.width =
+ acc->awb_fr.config.grid_cfg.width -
+ acc->awb_fr.stripes[0].grid_cfg.width;
+
+ b_w_log2 = acc->awb_fr.stripes[0].grid_cfg.block_width_log2;
+ end = ipu3_css_grid_end(acc->awb_fr.stripes[0].grid_cfg.x_start,
+ acc->awb_fr.stripes[0].grid_cfg.width,
+ b_w_log2);
+ acc->awb_fr.stripes[0].grid_cfg.x_end = end;
+
+ acc->awb_fr.stripes[1].grid_cfg.x_start =
+ (acc->awb_fr.stripes[0].grid_cfg.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+ b_w_log2 = acc->awb_fr.stripes[1].grid_cfg.block_width_log2;
+ end = ipu3_css_grid_end(acc->awb_fr.stripes[1].grid_cfg.x_start,
+ acc->awb_fr.stripes[1].grid_cfg.width,
+ b_w_log2);
+ acc->awb_fr.stripes[1].grid_cfg.x_end = end;
+
+ /*
+ * To reduce complexity of debubbling and loading
+ * statistics fix grid_height_per_slice to 1 for both
+ * stripes.
+ */
+ for (i = 0; i < stripes; i++)
+ acc->awb_fr.stripes[i].grid_cfg.height_per_slice = 1;
+ }
+
+ if (ipu3_css_awb_fr_ops_calc(css, &acc->awb_fr))
+ return -EINVAL;
+
+ /* acc_param: ae_config */
+
+ if (use && use->acc_ae) {
+ /* Take values from user */
+ acc->ae.grid_cfg = acc_user->ae.grid_cfg;
+ acc->ae.ae_ccm = acc_user->ae.ae_ccm;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = acc_user->ae.weights[i];
+ } else if (acc_old) {
+ /* Use old value */
+ acc->ae.grid_cfg = acc_old->ae.grid_cfg;
+ acc->ae.ae_ccm = acc_old->ae.ae_ccm;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = acc_old->ae.weights[i];
+ } else {
+ /* Set from scratch */
+ static const struct ipu3_uapi_ae_weight_elem
+ weight_def = { 1, 1, 1, 1, 1, 1, 1, 1 };
+
+ acc->ae.grid_cfg = ipu3_css_ae_grid_defaults;
+ acc->ae.ae_ccm = ipu3_css_ae_ccm_defaults;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = weight_def;
+ }
+
+ b_w_log2 = acc->ae.grid_cfg.block_width_log2;
+ acc->ae.grid_cfg.x_end = ipu3_css_grid_end(acc->ae.grid_cfg.x_start,
+ acc->ae.grid_cfg.width,
+ b_w_log2);
+ b_w_log2 = acc->ae.grid_cfg.block_height_log2;
+ acc->ae.grid_cfg.y_end = ipu3_css_grid_end(acc->ae.grid_cfg.y_start,
+ acc->ae.grid_cfg.height,
+ b_w_log2);
+
+ for (i = 0; i < stripes; i++)
+ acc->ae.stripes[i].grid = acc->ae.grid_cfg;
+
+ if (acc->ae.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->ae.stripes[0].grid.ae_en = 0;
+ } else if (acc->ae.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->ae.stripes[1].grid.ae_en = 0;
+ } else {
+ /* Enable for both stripes */
+ u8 b_w_log2;
+
+ acc->ae.stripes[0].grid.width =
+ (acc->stripe.bds_out_stripes[0].width -
+ acc->ae.grid_cfg.x_start + 1) >>
+ acc->ae.grid_cfg.block_width_log2;
+
+ acc->ae.stripes[1].grid.width =
+ acc->ae.grid_cfg.width - acc->ae.stripes[0].grid.width;
+
+ b_w_log2 = acc->ae.stripes[0].grid.block_width_log2;
+ acc->ae.stripes[0].grid.x_end =
+ ipu3_css_grid_end(acc->ae.stripes[0].grid.x_start,
+ acc->ae.stripes[0].grid.width,
+ b_w_log2);
+
+ acc->ae.stripes[1].grid.x_start =
+ (acc->ae.stripes[0].grid.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+ b_w_log2 = acc->ae.stripes[1].grid.block_width_log2;
+ acc->ae.stripes[1].grid.x_end =
+ ipu3_css_grid_end(acc->ae.stripes[1].grid.x_start,
+ acc->ae.stripes[1].grid.width,
+ b_w_log2);
+ }
+
+ /* acc_param: af_config */
+
+ if (use && use->acc_af) {
+ /* Take values from user */
+ acc->af.config.filter_config =
+ acc_user->af.config.filter_config;
+ acc->af.config.grid_cfg = acc_user->af.config.grid_cfg;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->af.config = acc_old->af.config;
+ } else {
+ /* Set from scratch */
+ acc->af.config.filter_config =
+ ipu3_css_af_defaults.filter_config;
+ acc->af.config.grid_cfg = ipu3_css_af_defaults.grid_cfg;
+ }
+
+ ipu3_css_grid_end_calc(&acc->af.config.grid_cfg);
+
+ if (acc->af.config.grid_cfg.width <= 0)
+ return -EINVAL;
+
+ acc->af.config.grid_cfg.height_per_slice =
+ IMGU_ABI_AF_MAX_CELLS_PER_SET / acc->af.config.grid_cfg.width;
+ acc->af.config.frame_size.width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ acc->af.config.frame_size.height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+
+ if (acc->stripe.bds_out_stripes[0].width <= min_overlap)
+ return -EINVAL;
+
+ for (i = 0; i < stripes; i++) {
+ acc->af.stripes[i].grid_cfg = acc->af.config.grid_cfg;
+ acc->af.stripes[i].frame_size.height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->af.stripes[i].frame_size.width =
+ acc->stripe.bds_out_stripes[i].width;
+ }
+
+ if (acc->af.config.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->af.stripes[0].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else if (acc->af.config.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->af.stripes[1].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else {
+ /* Enable for both stripes */
+
+ acc->af.stripes[0].grid_cfg.width =
+ (acc->stripe.bds_out_stripes[0].width - min_overlap -
+ acc->af.config.grid_cfg.x_start + 1) >>
+ acc->af.config.grid_cfg.block_width_log2;
+ acc->af.stripes[1].grid_cfg.width =
+ acc->af.config.grid_cfg.width -
+ acc->af.stripes[0].grid_cfg.width;
+
+ b_w_log2 = acc->af.stripes[0].grid_cfg.block_width_log2;
+ acc->af.stripes[0].grid_cfg.x_end =
+ ipu3_css_grid_end(acc->af.stripes[0].grid_cfg.x_start,
+ acc->af.stripes[0].grid_cfg.width,
+ b_w_log2);
+
+ acc->af.stripes[1].grid_cfg.x_start =
+ (acc->af.stripes[0].grid_cfg.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+
+ b_w_log2 = acc->af.stripes[1].grid_cfg.block_width_log2;
+ acc->af.stripes[1].grid_cfg.x_end =
+ ipu3_css_grid_end(acc->af.stripes[1].grid_cfg.x_start,
+ acc->af.stripes[1].grid_cfg.width,
+ b_w_log2);
+
+ /*
+ * To reduce complexity of debubbling and loading statistics
+ * fix grid_height_per_slice to 1 for both stripes
+ */
+ for (i = 0; i < stripes; i++)
+ acc->af.stripes[i].grid_cfg.height_per_slice = 1;
+ }
+
+ if (ipu3_css_af_ops_calc(css, &acc->af))
+ return -EINVAL;
+
+ /* acc_param: awb_config */
+
+ if (use && use->acc_awb) {
+ /* Take values from user */
+ acc->awb.config = acc_user->awb.config;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->awb.config = acc_old->awb.config;
+ } else {
+ /* Set from scratch */
+ acc->awb.config = ipu3_css_awb_defaults;
+ }
+
+ if (acc->awb.config.grid.width <= 0)
+ return -EINVAL;
+
+ acc->awb.config.grid.height_per_slice =
+ IMGU_ABI_AWB_MAX_CELLS_PER_SET / acc->awb.config.grid.width,
+ ipu3_css_grid_end_calc(&acc->awb.config.grid);
+
+ for (i = 0; i < stripes; i++)
+ acc->awb.stripes[i] = acc->awb.config;
+
+ if (acc->awb.config.grid.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->awb.stripes[0].rgbs_thr_b &= ~IPU3_UAPI_AWB_RGBS_THR_B_EN;
+ } else if (acc->awb.config.grid.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->awb.stripes[1].rgbs_thr_b &= ~IPU3_UAPI_AWB_RGBS_THR_B_EN;
+ } else {
+ /* Enable for both stripes */
+
+ acc->awb.stripes[0].grid.width =
+ (acc->stripe.bds_out_stripes[0].width -
+ acc->awb.config.grid.x_start + 1) >>
+ acc->awb.config.grid.block_width_log2;
+ acc->awb.stripes[1].grid.width = acc->awb.config.grid.width -
+ acc->awb.stripes[0].grid.width;
+
+ b_w_log2 = acc->awb.stripes[0].grid.block_width_log2;
+ acc->awb.stripes[0].grid.x_end =
+ ipu3_css_grid_end(acc->awb.stripes[0].grid.x_start,
+ acc->awb.stripes[0].grid.width,
+ b_w_log2);
+
+ acc->awb.stripes[1].grid.x_start =
+ (acc->awb.stripes[0].grid.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+
+ b_w_log2 = acc->awb.stripes[1].grid.block_width_log2;
+ acc->awb.stripes[1].grid.x_end =
+ ipu3_css_grid_end(acc->awb.stripes[1].grid.x_start,
+ acc->awb.stripes[1].grid.width,
+ b_w_log2);
+
+ /*
+ * To reduce complexity of debubbling and loading statistics
+ * fix grid_height_per_slice to 1 for both stripes
+ */
+ for (i = 0; i < stripes; i++)
+ acc->awb.stripes[i].grid.height_per_slice = 1;
+ }
+
+ if (ipu3_css_awb_ops_calc(css, &acc->awb))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Fill the indicated structure in `new_binary_params' from the possible
+ * sources based on `use_user' flag: if the flag is false, copy from
+ * `old_binary_params', or if the flag is true, copy from `user_setting'
+ * and return NULL (or error pointer on error).
+ * If the flag is false and `old_binary_params' is NULL, return pointer
+ * to the structure inside `new_binary_params'. In that case the caller
+ * should calculate and fill the structure from scratch.
+ */
+static void *ipu3_css_cfg_copy(struct ipu3_css *css, bool use_user,
+ void *user_setting, void *old_binary_params,
+ void *new_binary_params,
+ enum imgu_abi_memories m,
+ struct imgu_fw_isp_parameter *par,
+ size_t par_size)
+{
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ void *new_setting, *old_setting;
+
+ new_setting = ipu3_css_fw_pipeline_params(css, c, m, par, par_size,
+ new_binary_params);
+ if (!new_setting)
+ return ERR_PTR(-EPROTO); /* Corrupted firmware */
+
+ if (use_user) {
+ /* Take new user parameters */
+ memcpy(new_setting, user_setting, par_size);
+ } else if (old_binary_params) {
+ /* Take previous value */
+ old_setting = ipu3_css_fw_pipeline_params(css, c, m, par,
+ par_size,
+ old_binary_params);
+ if (!old_setting)
+ return ERR_PTR(-EPROTO);
+ memcpy(new_setting, old_setting, par_size);
+ } else {
+ return new_setting; /* Need to calculate */
+ }
+
+ return NULL; /* Copied from other value */
+}
+
+/*
+ * Configure VMEM0 parameters (late binding parameters).
+ */
+int ipu3_css_cfg_vmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *vmem0, void *vmem0_old,
+ struct ipu3_uapi_params *user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ struct imgu_fw_param_memory_offsets *pofs = (void *)css->fwp +
+ bi->blob.memory_offsets.offsets[IMGU_ABI_PARAM_CLASS_PARAM];
+ struct ipu3_uapi_isp_lin_vmem_params *lin_vmem = NULL;
+ struct ipu3_uapi_isp_tnr3_vmem_params *tnr_vmem = NULL;
+ struct ipu3_uapi_isp_xnr3_vmem_params *xnr_vmem = NULL;
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ const enum imgu_abi_memories m = IMGU_ABI_MEM_ISP_VMEM0;
+ unsigned int i;
+
+ /* Configure VMEM0 */
+
+ memset(vmem0, 0, bi->info.isp.sp.mem_initializers.params[c][m].size);
+
+ /* Configure Linearization VMEM0 parameters */
+
+ lin_vmem = ipu3_css_cfg_copy(css, use && use->lin_vmem_params,
+ &user->lin_vmem_params, vmem0_old, vmem0,
+ m, &pofs->vmem.lin, sizeof(*lin_vmem));
+ if (!IS_ERR_OR_NULL(lin_vmem)) {
+ /* Generate parameter from scratch */
+ for (i = 0; i < IPU3_UAPI_LIN_LUT_SIZE; i++) {
+ lin_vmem->lin_lutlow_gr[i] = 32 * i;
+ lin_vmem->lin_lutlow_r[i] = 32 * i;
+ lin_vmem->lin_lutlow_b[i] = 32 * i;
+ lin_vmem->lin_lutlow_gb[i] = 32 * i;
+
+ lin_vmem->lin_lutdif_gr[i] = 32;
+ lin_vmem->lin_lutdif_r[i] = 32;
+ lin_vmem->lin_lutdif_b[i] = 32;
+ lin_vmem->lin_lutdif_gb[i] = 32;
+ }
+ }
+
+ /* Configure TNR3 VMEM parameters */
+ if (css->pipe_id == IPU3_CSS_PIPE_ID_VIDEO) {
+ tnr_vmem = ipu3_css_cfg_copy(css, use && use->tnr3_vmem_params,
+ &user->tnr3_vmem_params,
+ vmem0_old, vmem0, m,
+ &pofs->vmem.tnr3,
+ sizeof(*tnr_vmem));
+ if (!IS_ERR_OR_NULL(tnr_vmem)) {
+ /* Generate parameter from scratch */
+ for (i = 0; i < IPU3_UAPI_ISP_TNR3_VMEM_LEN; i++)
+ tnr_vmem->sigma[i] = 256;
+ }
+ }
+ i = IPU3_UAPI_ISP_TNR3_VMEM_LEN;
+
+ /* Configure XNR3 VMEM parameters */
+
+ xnr_vmem = ipu3_css_cfg_copy(css, use && use->xnr3_vmem_params,
+ &user->xnr3_vmem_params, vmem0_old, vmem0,
+ m, &pofs->vmem.xnr3, sizeof(*xnr_vmem));
+ if (!IS_ERR_OR_NULL(xnr_vmem)) {
+ xnr_vmem->x[i] = ipu3_css_xnr3_vmem_defaults.x
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->a[i] = ipu3_css_xnr3_vmem_defaults.a
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->b[i] = ipu3_css_xnr3_vmem_defaults.b
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->c[i] = ipu3_css_xnr3_vmem_defaults.c
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ }
+
+ return IS_ERR(lin_vmem) || IS_ERR(tnr_vmem) || IS_ERR(xnr_vmem) ?
+ -EPROTO : 0;
+}
+
+/*
+ * Configure DMEM0 parameters (late binding parameters).
+ */
+int ipu3_css_cfg_dmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *dmem0, void *dmem0_old,
+ struct ipu3_uapi_params *user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ struct imgu_fw_param_memory_offsets *pofs = (void *)css->fwp +
+ bi->blob.memory_offsets.offsets[IMGU_ABI_PARAM_CLASS_PARAM];
+
+ struct ipu3_uapi_isp_tnr3_params *tnr_dmem = NULL;
+ struct ipu3_uapi_isp_xnr3_params *xnr_dmem;
+
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ const enum imgu_abi_memories m = IMGU_ABI_MEM_ISP_DMEM0;
+
+ /* Configure DMEM0 */
+
+ memset(dmem0, 0, bi->info.isp.sp.mem_initializers.params[c][m].size);
+
+ /* Configure TNR3 DMEM0 parameters */
+ if (css->pipe_id == IPU3_CSS_PIPE_ID_VIDEO) {
+ tnr_dmem = ipu3_css_cfg_copy(css, use && use->tnr3_dmem_params,
+ &user->tnr3_dmem_params, dmem0_old,
+ dmem0, m, &pofs->dmem.tnr3,
+ sizeof(*tnr_dmem));
+ if (!IS_ERR_OR_NULL(tnr_dmem)) {
+ /* Generate parameter from scratch */
+ tnr_dmem->knee_y1 = 768;
+ tnr_dmem->knee_y2 = 1280;
+ }
+ }
+
+ /* Configure XNR3 DMEM0 parameters */
+
+ xnr_dmem = ipu3_css_cfg_copy(css, use && use->xnr3_dmem_params,
+ &user->xnr3_dmem_params, dmem0_old, dmem0,
+ m, &pofs->dmem.xnr3, sizeof(*xnr_dmem));
+ if (!IS_ERR_OR_NULL(xnr_dmem)) {
+ /* Generate parameter from scratch */
+ xnr_dmem->alpha.y0 = 2047;
+ xnr_dmem->alpha.u0 = 2047;
+ xnr_dmem->alpha.v0 = 2047;
+ }
+
+ return IS_ERR(tnr_dmem) || IS_ERR(xnr_dmem) ? -EPROTO : 0;
+}
+
+/* Generate unity morphing table without morphing effect */
+void ipu3_css_cfg_gdc_table(struct imgu_abi_gdc_warp_param *gdc,
+ int frame_in_x, int frame_in_y,
+ int frame_out_x, int frame_out_y,
+ int env_w, int env_h)
+{
+ static const unsigned int FRAC_BITS = IMGU_ABI_GDC_FRAC_BITS;
+ static const unsigned int XMEM_ALIGN = 1 << 4;
+ const unsigned int XMEM_ALIGN_MASK = ~(XMEM_ALIGN - 1);
+ static const unsigned int BCI_ENV = 4;
+ static const unsigned int BYP = 2; /* Bytes per pixel */
+ const unsigned int OFFSET_X = 2 * IMGU_DVS_BLOCK_W + env_w + 1;
+ const unsigned int OFFSET_Y = IMGU_DVS_BLOCK_H + env_h + 1;
+
+ struct imgu_abi_gdc_warp_param gdc_luma, gdc_chroma;
+
+ unsigned int blocks_x = ALIGN(DIV_ROUND_UP(frame_out_x,
+ IMGU_DVS_BLOCK_W), 2);
+ unsigned int blocks_y = DIV_ROUND_UP(frame_out_y, IMGU_DVS_BLOCK_H);
+ unsigned int y0, x0, x1, x, y;
+
+ /* Global luma settings */
+ gdc_luma.origin_x = 0;
+ gdc_luma.origin_y = 0;
+ gdc_luma.p0_x = (OFFSET_X - (OFFSET_X & XMEM_ALIGN_MASK)) << FRAC_BITS;
+ gdc_luma.p0_y = 0;
+ gdc_luma.p1_x = gdc_luma.p0_x + (IMGU_DVS_BLOCK_W << FRAC_BITS);
+ gdc_luma.p1_y = gdc_luma.p0_y;
+ gdc_luma.p2_x = gdc_luma.p0_x;
+ gdc_luma.p2_y = gdc_luma.p0_y + (IMGU_DVS_BLOCK_H << FRAC_BITS);
+ gdc_luma.p3_x = gdc_luma.p1_x;
+ gdc_luma.p3_y = gdc_luma.p2_y;
+
+ gdc_luma.in_block_width = IMGU_DVS_BLOCK_W + BCI_ENV +
+ OFFSET_X - (OFFSET_X & XMEM_ALIGN_MASK);
+ gdc_luma.in_block_width_a = DIV_ROUND_UP(gdc_luma.in_block_width,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ gdc_luma.in_block_width_b = DIV_ROUND_UP(gdc_luma.in_block_width,
+ IMGU_ABI_ISP_DDR_WORD_BYTES /
+ BYP);
+ gdc_luma.in_block_height = IMGU_DVS_BLOCK_H + BCI_ENV;
+ gdc_luma.padding = 0;
+
+ /* Global chroma settings */
+ gdc_chroma.origin_x = 0;
+ gdc_chroma.origin_y = 0;
+ gdc_chroma.p0_x = (OFFSET_X / 2 - (OFFSET_X / 2 & XMEM_ALIGN_MASK)) <<
+ FRAC_BITS;
+ gdc_chroma.p0_y = 0;
+ gdc_chroma.p1_x = gdc_chroma.p0_x + (IMGU_DVS_BLOCK_W << FRAC_BITS);
+ gdc_chroma.p1_y = gdc_chroma.p0_y;
+ gdc_chroma.p2_x = gdc_chroma.p0_x;
+ gdc_chroma.p2_y = gdc_chroma.p0_y + (IMGU_DVS_BLOCK_H / 2 << FRAC_BITS);
+ gdc_chroma.p3_x = gdc_chroma.p1_x;
+ gdc_chroma.p3_y = gdc_chroma.p2_y;
+
+ gdc_chroma.in_block_width = IMGU_DVS_BLOCK_W + BCI_ENV;
+ gdc_chroma.in_block_width_a = DIV_ROUND_UP(gdc_chroma.in_block_width,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ gdc_chroma.in_block_width_b = DIV_ROUND_UP(gdc_chroma.in_block_width,
+ IMGU_ABI_ISP_DDR_WORD_BYTES /
+ BYP);
+ gdc_chroma.in_block_height = IMGU_DVS_BLOCK_H / 2 + BCI_ENV;
+ gdc_chroma.padding = 0;
+
+ /* Calculate block offsets for luma and chroma */
+ for (y0 = 0; y0 < blocks_y; y0++) {
+ for (x0 = 0; x0 < blocks_x / 2; x0++) {
+ for (x1 = 0; x1 < 2; x1++) {
+ /* Luma blocks */
+ x = (x0 * 2 + x1) * IMGU_DVS_BLOCK_W + OFFSET_X;
+ x &= XMEM_ALIGN_MASK;
+ y = y0 * IMGU_DVS_BLOCK_H + OFFSET_Y;
+ *gdc = gdc_luma;
+ gdc->in_addr_offset =
+ (y * frame_in_x + x) * BYP;
+ gdc++;
+ }
+
+ /* Chroma block */
+ x = x0 * IMGU_DVS_BLOCK_W + OFFSET_X / 2;
+ x &= XMEM_ALIGN_MASK;
+ y = y0 * (IMGU_DVS_BLOCK_H / 2) + OFFSET_Y / 2;
+ *gdc = gdc_chroma;
+ gdc->in_addr_offset = (y * frame_in_x + x) * BYP;
+ gdc++;
+ }
+ }
+}
diff --git a/drivers/media/pci/intel/ipu3/ipu3-css-params.h b/drivers/media/pci/intel/ipu3/ipu3-css-params.h
new file mode 100644
index 0000000..f93ed027
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-css-params.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2018 Intel Corporation */
+
+#ifndef __IPU3_PARAMS_H
+#define __IPU3_PARAMS_H
+
+int ipu3_css_cfg_acc(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ struct imgu_abi_acc_param *acc,
+ struct imgu_abi_acc_param *acc_old,
+ struct ipu3_uapi_acc_param *acc_user);
+
+int ipu3_css_cfg_vmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *vmem0, void *vmem0_old,
+ struct ipu3_uapi_params *user);
+
+int ipu3_css_cfg_dmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *dmem0, void *dmem0_old,
+ struct ipu3_uapi_params *user);
+
+void ipu3_css_cfg_gdc_table(struct imgu_abi_gdc_warp_param *gdc,
+ int frame_in_x, int frame_in_y,
+ int frame_out_x, int frame_out_y,
+ int env_w, int env_h);
+
+#endif /*__IPU3_PARAMS_H */
--
2.7.4
next prev parent reply other threads:[~2018-10-30 7:17 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-29 22:22 [PATCH v7 00/16] Intel IPU3 ImgU patchset Yong Zhi
2018-10-29 22:22 ` [PATCH v7 01/16] v4l: Add Intel IPU3 meta buffer formats Yong Zhi
2018-11-02 12:59 ` Mauro Carvalho Chehab
2018-11-02 13:05 ` Mauro Carvalho Chehab
2018-11-29 19:16 ` Laurent Pinchart
2018-11-29 23:12 ` Zhi, Yong
2018-10-29 22:22 ` [PATCH v7 02/16] doc-rst: Add Intel IPU3 documentation Yong Zhi
2018-11-29 22:50 ` Laurent Pinchart
2018-12-13 9:38 ` Sakari Ailus
2018-12-13 10:41 ` Laurent Pinchart
2018-12-13 10:50 ` Sakari Ailus
2018-12-13 9:38 ` [PATCH 1/1] staging/ipu3-imgu: Address documentation comments Sakari Ailus
2018-10-29 22:22 ` [PATCH v7 03/16] v4l: Add Intel IPU3 meta data uAPI Yong Zhi
2018-11-02 13:02 ` Sakari Ailus
2018-11-16 22:37 ` Zhi, Yong
[not found] ` <20181129224548.qwbkau6suipt2veq@kekkonen.localdomain>
2018-11-29 23:06 ` Zhi, Yong
2018-11-29 23:06 ` Zhi, Yong
2018-12-01 20:57 ` Sakari Ailus
2018-12-01 20:57 ` Sakari Ailus
2018-11-02 13:49 ` Mauro Carvalho Chehab
2018-11-02 14:04 ` Tomasz Figa
2018-11-06 23:27 ` Mani, Rajmohan
2018-11-15 10:52 ` Hans Verkuil
2018-11-29 0:41 ` Mani, Rajmohan
2018-11-06 18:25 ` Zhi, Yong
2018-11-15 12:51 ` Hans Verkuil
2018-11-21 18:45 ` Zhi, Yong
2018-10-29 22:22 ` [PATCH v7 04/16] intel-ipu3: abi: Add register definitions and enum Yong Zhi
2018-10-29 22:22 ` [PATCH v7 05/16] intel-ipu3: abi: Add structs Yong Zhi
2018-11-05 8:27 ` Sakari Ailus
2018-11-05 19:05 ` Mani, Rajmohan
2018-11-06 8:04 ` Sakari Ailus
2018-11-06 23:31 ` Mani, Rajmohan
2018-10-29 22:23 ` [PATCH v7 06/16] intel-ipu3: mmu: Implement driver Yong Zhi
2018-11-05 11:55 ` Sakari Ailus
2018-11-06 5:50 ` Zhi, Yong
2018-11-06 5:56 ` Tomasz Figa
2018-10-29 22:23 ` [PATCH v7 07/16] intel-ipu3: Implement DMA mapping functions Yong Zhi
2018-10-29 22:23 ` [PATCH v7 08/16] intel-ipu3: css: Add dma buff pool utility functions Yong Zhi
2018-11-08 15:36 ` Sakari Ailus
2018-11-09 23:16 ` Zhi, Yong
2018-11-12 9:21 ` Sakari Ailus
2018-10-29 22:23 ` [PATCH v7 09/16] intel-ipu3: css: Add support for firmware management Yong Zhi
2018-11-28 22:22 ` Sakari Ailus
2018-10-29 22:23 ` Yong Zhi [this message]
2018-10-29 22:23 ` [PATCH v7 12/16] intel-ipu3: css: Initialize css hardware Yong Zhi
2018-11-09 12:06 ` Sakari Ailus
2018-10-29 22:23 ` [PATCH v7 13/16] intel-ipu3: Add css pipeline programming Yong Zhi
2018-10-29 22:23 ` [PATCH v7 14/16] intel-ipu3: Add v4l2 driver based on media framework Yong Zhi
2018-11-09 12:36 ` Sakari Ailus
2018-11-09 23:26 ` Zhi, Yong
2018-11-15 12:51 ` Hans Verkuil
2018-11-15 16:09 ` Zhi, Yong
2018-10-29 22:23 ` [PATCH v7 15/16] intel-ipu3: Add imgu top level pci device driver Yong Zhi
2018-11-09 12:54 ` Sakari Ailus
2018-11-12 22:16 ` Zhi, Yong
2018-10-29 22:23 ` [PATCH v7 16/16] intel-ipu3: Add dual pipe support Yong Zhi
2018-11-01 12:03 ` [PATCH v7 00/16] Intel IPU3 ImgU patchset Sakari Ailus
2018-11-07 4:16 ` Bing Bu Cao
2018-11-09 1:28 ` Zhi, Yong
2018-11-09 11:28 ` Sakari Ailus
2018-11-09 10:09 ` Sakari Ailus
2018-11-12 4:31 ` Bing Bu Cao
2018-11-13 10:31 ` Sakari Ailus
2018-11-13 11:04 ` Bing Bu Cao
2018-11-13 21:58 ` Sakari Ailus
2018-11-14 7:02 ` Bing Bu Cao
2018-11-29 23:09 ` Laurent Pinchart
2018-11-30 13:37 ` Sakari Ailus
2018-11-29 23:07 ` Laurent Pinchart
2018-12-03 9:51 ` Sakari Ailus
2018-12-03 12:34 ` Laurent Pinchart
2018-11-14 0:25 ` jacopo mondi
2018-11-14 7:40 ` Sakari Ailus
2018-11-18 0:12 ` jacopo mondi
2018-11-29 14:43 ` Laurent Pinchart
2018-11-29 19:51 ` Tomasz Figa
2018-11-29 22:54 ` Laurent Pinchart
2018-11-29 22:58 ` Mani, Rajmohan
2018-12-04 16:07 ` Mani, Rajmohan
2018-12-04 16:42 ` Laurent Pinchart
2018-12-04 16:53 ` Mani, Rajmohan
2018-12-05 0:30 ` Mani, Rajmohan
2018-12-11 13:34 ` Laurent Pinchart
2018-12-11 13:43 ` Laurent Pinchart
2018-12-11 14:20 ` Laurent Pinchart
2018-12-16 7:26 ` Laurent Pinchart
2018-12-20 22:25 ` Laurent Pinchart
2018-12-21 3:04 ` Tomasz Figa
2019-01-08 6:54 ` Tomasz Figa
2019-01-09 16:40 ` Jacopo Mondi
2019-01-09 17:00 ` Mani, Rajmohan
2019-01-09 17:25 ` Jacopo Mondi
2019-01-09 18:01 ` Mani, Rajmohan
2019-01-09 18:20 ` Jacopo Mondi
2019-01-09 18:36 ` Mani, Rajmohan
2019-01-10 8:19 ` Jacopo Mondi
2019-01-12 2:06 ` Mani, Rajmohan
2019-01-12 2:30 ` Mani, Rajmohan
2019-01-12 15:10 ` Laurent Pinchart
[not found] ` <6F87890CF0F5204F892DEA1EF0D77A599B323499@fmsmsx122.amr.corp.intel.com>
2019-01-21 5:41 ` Tomasz Figa
2019-01-21 8:07 ` Laurent Pinchart
2019-01-22 16:21 ` Mani, Rajmohan
[not found] ` <6F87890CF0F5204F892DEA1EF0D77A599B31FAF4@fmsmsx122.amr.corp.intel.com>
2019-01-08 23:34 ` Laurent Pinchart
2018-12-12 4:55 ` Bingbu Cao
2018-12-13 22:24 ` Laurent Pinchart
2018-12-14 2:53 ` Bingbu Cao
2018-12-17 3:14 ` Bingbu Cao
2018-12-26 11:03 ` Laurent Pinchart
2019-01-02 2:38 ` Bingbu Cao
2019-01-02 8:20 ` Laurent Pinchart
2019-01-02 20:26 ` Sakari Ailus
2019-01-28 10:09 ` Jacopo Mondi
2019-01-29 8:56 ` Tomasz Figa
2019-02-01 10:04 ` Jacopo Mondi
2019-02-05 6:01 ` Tomasz Figa
2019-03-23 13:02 ` Jacopo Mondi
2019-03-25 3:45 ` Bingbu Cao
2019-03-25 4:06 ` Laurent Pinchart
2019-03-25 8:11 ` Jacopo Mondi
2019-03-25 10:07 ` Bingbu Cao
2019-03-26 11:16 ` Jacopo Mondi
2019-04-08 6:35 ` Bingbu Cao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540851790-1777-12-git-send-email-yong.zhi@intel.com \
--to=yong.zhi@intel.com \
--cc=bingbu.cao@intel.com \
--cc=hans.verkuil@cisco.com \
--cc=jerry.w.hu@intel.com \
--cc=jian.xu.zheng@intel.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rajmohan.mani@intel.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tfiga@chromium.org \
--cc=tian.shu.qiu@intel.com \
--cc=tuukka.toivonen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.