From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-pg1-f193.google.com ([209.85.215.193]:46380 "EHLO mail-pg1-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731794AbfAIPIM (ORCPT ); Wed, 9 Jan 2019 10:08:12 -0500 From: Akinobu Mita Subject: [PATCH v2.1 08/13] media: mt9m001: remove remaining soc_camera specific code Date: Thu, 10 Jan 2019 00:07:46 +0900 Message-Id: <1547046466-12765-1-git-send-email-akinobu.mita@gmail.com> In-Reply-To: <20190109140024.jnubog5m2ekquaqo@paasikivi.fi.intel.com> References: <20190109140024.jnubog5m2ekquaqo@paasikivi.fi.intel.com> Sender: devicetree-owner@vger.kernel.org To: linux-media@vger.kernel.org, devicetree@vger.kernel.org Cc: Akinobu Mita , Guennadi Liakhovetski , Sakari Ailus , Mauro Carvalho Chehab List-ID: Remove remaining soc_camera specific code and drop soc_camera dependency from this driver. Cc: Guennadi Liakhovetski Cc: Sakari Ailus Cc: Mauro Carvalho Chehab Signed-off-by: Akinobu Mita --- * v2.1 - Fix misconversion while opencoding soc_camera_limit_side(). drivers/media/i2c/Kconfig | 2 +- drivers/media/i2c/mt9m001.c | 84 ++++++++------------------------------------- 2 files changed, 15 insertions(+), 71 deletions(-) diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index ee3ef1b..bc248d9 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -859,7 +859,7 @@ config VIDEO_VS6624 config VIDEO_MT9M001 tristate "mt9m001 support" - depends on SOC_CAMERA && I2C + depends on I2C && VIDEO_V4L2 help This driver supports MT9M001 cameras from Micron, monochrome and colour models. diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c index 1619c8c..5a3b612 100644 --- a/drivers/media/i2c/mt9m001.c +++ b/drivers/media/i2c/mt9m001.c @@ -15,15 +15,12 @@ #include #include -#include -#include #include +#include #include /* * mt9m001 i2c address 0x5d - * The platform has to define struct i2c_board_info objects and link to them - * from struct soc_camera_host_desc */ /* mt9m001 selected register addresses */ @@ -276,11 +273,15 @@ static int mt9m001_set_selection(struct v4l2_subdev *sd, rect.width = ALIGN(rect.width, 2); rect.left = ALIGN(rect.left, 2); - soc_camera_limit_side(&rect.left, &rect.width, - MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH); + rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH); + rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP, + MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width); - soc_camera_limit_side(&rect.top, &rect.height, - MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT); + rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT, + MT9M001_MAX_HEIGHT); + rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP, + MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height); mt9m001->total_h = rect.height + mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK; @@ -565,12 +566,10 @@ static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) * Interface active, can use i2c. If it fails, it can indeed mean, that * this wasn't our capture interface, so, we wait for the right one */ -static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd, - struct i2c_client *client) +static int mt9m001_video_probe(struct i2c_client *client) { struct mt9m001 *mt9m001 = to_mt9m001(client); s32 data; - unsigned long flags; int ret; /* Enable the chip */ @@ -585,9 +584,11 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd, case 0x8411: case 0x8421: mt9m001->fmts = mt9m001_colour_fmts; + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts); break; case 0x8431: mt9m001->fmts = mt9m001_monochrome_fmts; + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts); break; default: dev_err(&client->dev, @@ -596,26 +597,6 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd, goto done; } - mt9m001->num_fmts = 0; - - /* - * This is a 10bit sensor, so by default we only allow 10bit. - * The platform may support different bus widths due to - * different routing of the data lines. - */ - if (ssdd->query_bus_param) - flags = ssdd->query_bus_param(ssdd); - else - flags = SOCAM_DATAWIDTH_10; - - if (flags & SOCAM_DATAWIDTH_10) - mt9m001->num_fmts++; - else - mt9m001->fmts++; - - if (flags & SOCAM_DATAWIDTH_8) - mt9m001->num_fmts++; - mt9m001->fmt = &mt9m001->fmts[0]; dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, @@ -634,12 +615,6 @@ static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd, return ret; } -static void mt9m001_video_remove(struct soc_camera_subdev_desc *ssdd) -{ - if (ssdd->free_bus) - ssdd->free_bus(ssdd); -} - static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -679,41 +654,18 @@ static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - /* MT9M001 has all capture_format parameters fixed */ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER; cfg->type = V4L2_MBUS_PARALLEL; - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); return 0; } -static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg) -{ - const struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct mt9m001 *mt9m001 = to_mt9m001(client); - unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample; - - if (ssdd->set_bus_param) - return ssdd->set_bus_param(ssdd, 1 << (bps - 1)); - - /* - * Without board specific bus width settings we only support the - * sensors native bus width - */ - return bps == 10 ? 0 : -EINVAL; -} - static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_stream = mt9m001_s_stream, .g_mbus_config = mt9m001_g_mbus_config, - .s_mbus_config = mt9m001_s_mbus_config, }; static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { @@ -740,21 +692,15 @@ static int mt9m001_probe(struct i2c_client *client, { struct mt9m001 *mt9m001; struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); int ret; - if (!ssdd) { - dev_err(&client->dev, "MT9M001 driver needs platform data\n"); - return -EINVAL; - } - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { dev_warn(&adapter->dev, "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); return -EIO; } - mt9m001 = devm_kzalloc(&client->dev, sizeof(struct mt9m001), GFP_KERNEL); + mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL); if (!mt9m001) return -ENOMEM; @@ -811,7 +757,7 @@ static int mt9m001_probe(struct i2c_client *client, pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); - ret = mt9m001_video_probe(ssdd, client); + ret = mt9m001_video_probe(client); if (ret) goto error_power_off; @@ -834,7 +780,6 @@ static int mt9m001_probe(struct i2c_client *client, static int mt9m001_remove(struct i2c_client *client) { struct mt9m001 *mt9m001 = to_mt9m001(client); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); v4l2_device_unregister_subdev(&mt9m001->subdev); pm_runtime_get_sync(&client->dev); @@ -845,7 +790,6 @@ static int mt9m001_remove(struct i2c_client *client) mt9m001_power_off(&client->dev); v4l2_ctrl_handler_free(&mt9m001->hdl); - mt9m001_video_remove(ssdd); mutex_destroy(&mt9m001->mutex); return 0; -- 2.7.4