[PATCH v5 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver

[PATCH v5 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver

[Jolly Shah]

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

v5:
 - Added Reviewed tag for dt bindings

v4:
 - Minor fixes to address v3 review comments
 
v3:
 - Updated DT bindings as per v2 review comments
 
v2:
 - Rebased on top of latest firmware driver patch series
 - Updated driver to use shared interrupt instead of mailbox

Rajan Vaja (3):
  dt-bindings: soc: Add ZynqMP PM bindings
  firmware: xilinx: Implement ZynqMP power management APIs
  drivers: soc: xilinx: Add ZynqMP PM driver

 .../bindings/power/reset/xlnx,zynqmp-power.txt     |  25 +++
 drivers/firmware/xilinx/zynqmp.c                   |  29 ++++
 drivers/soc/xilinx/Kconfig                         |  11 ++
 drivers/soc/xilinx/Makefile                        |   1 +
 drivers/soc/xilinx/zynqmp_power.c                  | 178 +++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h               |  20 +++
 6 files changed, 264 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

-- 
2.7.4

[PATCH v5 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver

[Jolly Shah]

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

v5:
 - Added Reviewed tag for dt bindings

v4:
 - Minor fixes to address v3 review comments
 
v3:
 - Updated DT bindings as per v2 review comments
 
v2:
 - Rebased on top of latest firmware driver patch series
 - Updated driver to use shared interrupt instead of mailbox

Rajan Vaja (3):
  dt-bindings: soc: Add ZynqMP PM bindings
  firmware: xilinx: Implement ZynqMP power management APIs
  drivers: soc: xilinx: Add ZynqMP PM driver

 .../bindings/power/reset/xlnx,zynqmp-power.txt     |  25 +++
 drivers/firmware/xilinx/zynqmp.c                   |  29 ++++
 drivers/soc/xilinx/Kconfig                         |  11 ++
 drivers/soc/xilinx/Makefile                        |   1 +
 drivers/soc/xilinx/zynqmp_power.c                  | 178 +++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h               |  20 +++
 6 files changed, 264 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

-- 
2.7.4

[PATCH v5 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver

[Jolly Shah]

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

v5:
 - Added Reviewed tag for dt bindings

v4:
 - Minor fixes to address v3 review comments
 
v3:
 - Updated DT bindings as per v2 review comments
 
v2:
 - Rebased on top of latest firmware driver patch series
 - Updated driver to use shared interrupt instead of mailbox

Rajan Vaja (3):
  dt-bindings: soc: Add ZynqMP PM bindings
  firmware: xilinx: Implement ZynqMP power management APIs
  drivers: soc: xilinx: Add ZynqMP PM driver

 .../bindings/power/reset/xlnx,zynqmp-power.txt     |  25 +++
 drivers/firmware/xilinx/zynqmp.c                   |  29 ++++
 drivers/soc/xilinx/Kconfig                         |  11 ++
 drivers/soc/xilinx/Makefile                        |   1 +
 drivers/soc/xilinx/zynqmp_power.c                  | 178 +++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h               |  20 +++
 6 files changed, 264 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/3] dt-bindings: soc: Add ZynqMP PM bindings

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add documentation to describe Xilinx ZynqMP power management
bindings.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/power/reset/xlnx,zynqmp-power.txt     | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..d366f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible:		Must contain:	"xlnx,zynqmp-power"
+ - interrupts:		Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_power: zynqmp-power {
+			compatible = "xlnx,zynqmp-power";
+			interrupts = <0 35 4>;
+		};
+	};
+};
-- 
2.7.4

[PATCH v5 1/3] dt-bindings: soc: Add ZynqMP PM bindings

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add documentation to describe Xilinx ZynqMP power management
bindings.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/power/reset/xlnx,zynqmp-power.txt     | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..d366f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible:		Must contain:	"xlnx,zynqmp-power"
+ - interrupts:		Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_power: zynqmp-power {
+			compatible = "xlnx,zynqmp-power";
+			interrupts = <0 35 4>;
+		};
+	};
+};
-- 
2.7.4

[PATCH v5 1/3] dt-bindings: soc: Add ZynqMP PM bindings

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add documentation to describe Xilinx ZynqMP power management
bindings.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/power/reset/xlnx,zynqmp-power.txt     | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..d366f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible:		Must contain:	"xlnx,zynqmp-power"
+ - interrupts:		Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_power: zynqmp-power {
+			compatible = "xlnx,zynqmp-power";
+			interrupts = <0 35 4>;
+		};
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add Xilinx ZynqMP firmware APIs to set suspend mode
and inform firmware that master has initialized its
own power management.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 84b3fd2..c7a3b6c 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
 	return ret;
 }
 
+/**
+ * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
+ *			       master has initialized its own power management
+ *
+ * This API function is to be used for notify the power management controller
+ * about the completed power management initialization.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_init_finalize(void)
+{
+	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
+ * @mode:	Mode to set for system suspend
+ *
+ * This API function is used to set mode of system suspend.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_set_suspend_mode(u32 mode)
+{
+	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
+}
+
 static const struct zynqmp_eemi_ops eemi_ops = {
 	.get_api_version = zynqmp_pm_get_api_version,
 	.query_data = zynqmp_pm_query_data,
@@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
 	.clock_getrate = zynqmp_pm_clock_getrate,
 	.clock_setparent = zynqmp_pm_clock_setparent,
 	.clock_getparent = zynqmp_pm_clock_getparent,
+	.init_finalize = zynqmp_pm_init_finalize,
+	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
 };
 
 /**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 015e130..1424170 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -28,12 +28,21 @@
 /* SMC SIP service Call Function Identifier Prefix */
 #define PM_SIP_SVC			0xC2000000
 #define PM_GET_TRUSTZONE_VERSION	0xa03
+#define PM_SET_SUSPEND_MODE		0xa02
+#define GET_CALLBACK_DATA		0xa01
 
 /* Number of 32bits values in payload */
 #define PAYLOAD_ARG_CNT	4U
 
+/* Number of arguments for a callback */
+#define CB_ARG_CNT	4
+
+/* Payload size (consists of callback API ID + arguments) */
+#define CB_PAYLOAD_SIZE (CB_ARG_CNT + 1)
+
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_PM_INIT_FINALIZE = 21,
 	PM_QUERY_DATA = 35,
 	PM_CLOCK_ENABLE,
 	PM_CLOCK_DISABLE,
@@ -73,6 +82,12 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_ATTRIBUTES,
 };
 
+enum zynqmp_pm_suspend_reason {
+	SUSPEND_POWER_REQUEST = 201,
+	SUSPEND_ALERT,
+	SUSPEND_SYSTEM_SHUTDOWN,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -99,8 +114,13 @@ struct zynqmp_eemi_ops {
 	int (*clock_getrate)(u32 clock_id, u64 *rate);
 	int (*clock_setparent)(u32 clock_id, u32 parent_id);
 	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+	int (*init_finalize)(void);
+	int (*set_suspend_mode)(u32 mode);
 };
 
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload);
+
 #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
 const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
 #else
-- 
2.7.4

[PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add Xilinx ZynqMP firmware APIs to set suspend mode
and inform firmware that master has initialized its
own power management.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 84b3fd2..c7a3b6c 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
 	return ret;
 }
 
+/**
+ * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
+ *			       master has initialized its own power management
+ *
+ * This API function is to be used for notify the power management controller
+ * about the completed power management initialization.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_init_finalize(void)
+{
+	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
+ * @mode:	Mode to set for system suspend
+ *
+ * This API function is used to set mode of system suspend.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_set_suspend_mode(u32 mode)
+{
+	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
+}
+
 static const struct zynqmp_eemi_ops eemi_ops = {
 	.get_api_version = zynqmp_pm_get_api_version,
 	.query_data = zynqmp_pm_query_data,
@@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
 	.clock_getrate = zynqmp_pm_clock_getrate,
 	.clock_setparent = zynqmp_pm_clock_setparent,
 	.clock_getparent = zynqmp_pm_clock_getparent,
+	.init_finalize = zynqmp_pm_init_finalize,
+	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
 };
 
 /**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 015e130..1424170 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -28,12 +28,21 @@
 /* SMC SIP service Call Function Identifier Prefix */
 #define PM_SIP_SVC			0xC2000000
 #define PM_GET_TRUSTZONE_VERSION	0xa03
+#define PM_SET_SUSPEND_MODE		0xa02
+#define GET_CALLBACK_DATA		0xa01
 
 /* Number of 32bits values in payload */
 #define PAYLOAD_ARG_CNT	4U
 
+/* Number of arguments for a callback */
+#define CB_ARG_CNT	4
+
+/* Payload size (consists of callback API ID + arguments) */
+#define CB_PAYLOAD_SIZE (CB_ARG_CNT + 1)
+
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_PM_INIT_FINALIZE = 21,
 	PM_QUERY_DATA = 35,
 	PM_CLOCK_ENABLE,
 	PM_CLOCK_DISABLE,
@@ -73,6 +82,12 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_ATTRIBUTES,
 };
 
+enum zynqmp_pm_suspend_reason {
+	SUSPEND_POWER_REQUEST = 201,
+	SUSPEND_ALERT,
+	SUSPEND_SYSTEM_SHUTDOWN,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -99,8 +114,13 @@ struct zynqmp_eemi_ops {
 	int (*clock_getrate)(u32 clock_id, u64 *rate);
 	int (*clock_setparent)(u32 clock_id, u32 parent_id);
 	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+	int (*init_finalize)(void);
+	int (*set_suspend_mode)(u32 mode);
 };
 
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload);
+
 #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
 const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
 #else
-- 
2.7.4

[PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add Xilinx ZynqMP firmware APIs to set suspend mode
and inform firmware that master has initialized its
own power management.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 84b3fd2..c7a3b6c 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
 	return ret;
 }
 
+/**
+ * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
+ *			       master has initialized its own power management
+ *
+ * This API function is to be used for notify the power management controller
+ * about the completed power management initialization.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_init_finalize(void)
+{
+	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
+ * @mode:	Mode to set for system suspend
+ *
+ * This API function is used to set mode of system suspend.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_set_suspend_mode(u32 mode)
+{
+	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
+}
+
 static const struct zynqmp_eemi_ops eemi_ops = {
 	.get_api_version = zynqmp_pm_get_api_version,
 	.query_data = zynqmp_pm_query_data,
@@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
 	.clock_getrate = zynqmp_pm_clock_getrate,
 	.clock_setparent = zynqmp_pm_clock_setparent,
 	.clock_getparent = zynqmp_pm_clock_getparent,
+	.init_finalize = zynqmp_pm_init_finalize,
+	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
 };
 
 /**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 015e130..1424170 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -28,12 +28,21 @@
 /* SMC SIP service Call Function Identifier Prefix */
 #define PM_SIP_SVC			0xC2000000
 #define PM_GET_TRUSTZONE_VERSION	0xa03
+#define PM_SET_SUSPEND_MODE		0xa02
+#define GET_CALLBACK_DATA		0xa01
 
 /* Number of 32bits values in payload */
 #define PAYLOAD_ARG_CNT	4U
 
+/* Number of arguments for a callback */
+#define CB_ARG_CNT	4
+
+/* Payload size (consists of callback API ID + arguments) */
+#define CB_PAYLOAD_SIZE (CB_ARG_CNT + 1)
+
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_PM_INIT_FINALIZE = 21,
 	PM_QUERY_DATA = 35,
 	PM_CLOCK_ENABLE,
 	PM_CLOCK_DISABLE,
@@ -73,6 +82,12 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_ATTRIBUTES,
 };
 
+enum zynqmp_pm_suspend_reason {
+	SUSPEND_POWER_REQUEST = 201,
+	SUSPEND_ALERT,
+	SUSPEND_SYSTEM_SHUTDOWN,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -99,8 +114,13 @@ struct zynqmp_eemi_ops {
 	int (*clock_getrate)(u32 clock_id, u64 *rate);
 	int (*clock_setparent)(u32 clock_id, u32 parent_id);
 	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+	int (*init_finalize)(void);
+	int (*set_suspend_mode)(u32 mode);
 };
 
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload);
+
 #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
 const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
 #else
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/3] drivers: soc: xilinx: Add ZynqMP PM driver

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/soc/xilinx/Kconfig        |  11 +++
 drivers/soc/xilinx/Makefile       |   1 +
 drivers/soc/xilinx/zynqmp_power.c | 178 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+)
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 687c8f3..5025e0e 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -17,4 +17,15 @@ config XILINX_VCU
 	  To compile this driver as a module, choose M here: the
 	  module will be called xlnx_vcu.
 
+config ZYNQMP_POWER
+	bool "Enable Xilinx Zynq MPSoC Power Management driver"
+	depends on PM && ARCH_ZYNQMP
+	default y
+	help
+	  Say yes to enable power management support for ZyqnMP SoC.
+	  This driver uses firmware driver as an interface for power
+	  management request to firmware. It registers isr to handle
+	  power management callbacks from firmware.
+	  If in doubt, say N.
+
 endmenu
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index dee8fd5..428b9db 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_XILINX_VCU)	+= xlnx_vcu.o
+obj-$(CONFIG_ZYNQMP_POWER)	+= zynqmp_power.o
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
new file mode 100644
index 0000000..771cb59
--- /dev/null
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Power Management
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajan.vaja@xilinx.com>
+ */
+
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/suspend.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+enum pm_suspend_mode {
+	PM_SUSPEND_MODE_FIRST = 0,
+	PM_SUSPEND_MODE_STD = PM_SUSPEND_MODE_FIRST,
+	PM_SUSPEND_MODE_POWER_OFF,
+};
+
+#define PM_SUSPEND_MODE_FIRST	PM_SUSPEND_MODE_STD
+
+static const char *const suspend_modes[] = {
+	[PM_SUSPEND_MODE_STD] = "standard",
+	[PM_SUSPEND_MODE_POWER_OFF] = "power-off",
+};
+
+static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD;
+
+enum pm_api_cb_id {
+	PM_INIT_SUSPEND_CB = 30,
+	PM_ACKNOWLEDGE_CB,
+	PM_NOTIFY_CB,
+};
+
+static void zynqmp_pm_get_callback_data(u32 *buf)
+{
+	zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf);
+}
+
+static irqreturn_t zynqmp_pm_isr(int irq, void *data)
+{
+	u32 payload[CB_PAYLOAD_SIZE];
+
+	zynqmp_pm_get_callback_data(payload);
+
+	/* First element is callback API ID, others are callback arguments */
+	if (payload[0] == PM_INIT_SUSPEND_CB) {
+		switch (payload[1]) {
+		case SUSPEND_SYSTEM_SHUTDOWN:
+			orderly_poweroff(true);
+			break;
+		case SUSPEND_POWER_REQUEST:
+			pm_suspend(PM_SUSPEND_MEM);
+			break;
+		default:
+			pr_err("%s Unsupported InitSuspendCb reason "
+				"code %d\n", __func__, payload[1]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t suspend_mode_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	char *s = buf;
+	int md;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md]) {
+			if (md == suspend_mode)
+				s += sprintf(s, "[%s] ", suspend_modes[md]);
+			else
+				s += sprintf(s, "%s ", suspend_modes[md]);
+		}
+
+	/* Convert last space to newline */
+	if (s != buf)
+		*(s - 1) = '\n';
+	return (s - buf);
+}
+
+static ssize_t suspend_mode_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int md, ret = -EINVAL;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->set_suspend_mode)
+		return ret;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md] &&
+		    sysfs_streq(suspend_modes[md], buf)) {
+			ret = 0;
+			break;
+		}
+
+	if (!ret && md != suspend_mode) {
+		ret = eemi_ops->set_suspend_mode(md);
+		if (likely(!ret))
+			suspend_mode = md;
+	}
+
+	return ret ? ret : count;
+}
+
+static DEVICE_ATTR_RW(suspend_mode);
+
+static int zynqmp_pm_probe(struct platform_device *pdev)
+{
+	int ret, irq;
+	u32 pm_api_version;
+
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize)
+		return -ENXIO;
+
+	eemi_ops->init_finalize();
+	eemi_ops->get_api_version(&pm_api_version);
+
+	/* Check PM API version number */
+	if (pm_api_version < ZYNQMP_PM_VERSION)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return -ENXIO;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, zynqmp_pm_isr,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					dev_name(&pdev->dev), &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "devm_request_threaded_irq '%d' failed "
+			"with %d\n", irq, ret);
+		return ret;
+	}
+
+	ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to create sysfs interface\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zynqmp_pm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+
+	return 0;
+}
+
+static const struct of_device_id pm_of_match[] = {
+	{ .compatible = "xlnx,zynqmp-power", },
+	{ /* end of table */ },
+};
+MODULE_DEVICE_TABLE(of, pm_of_match);
+
+static struct platform_driver zynqmp_pm_platform_driver = {
+	.probe = zynqmp_pm_probe,
+	.remove = zynqmp_pm_remove,
+	.driver = {
+		.name = "zynqmp_power",
+		.of_match_table = pm_of_match,
+	},
+};
+module_platform_driver(zynqmp_pm_platform_driver);
-- 
2.7.4

[PATCH v5 3/3] drivers: soc: xilinx: Add ZynqMP PM driver

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/soc/xilinx/Kconfig        |  11 +++
 drivers/soc/xilinx/Makefile       |   1 +
 drivers/soc/xilinx/zynqmp_power.c | 178 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+)
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 687c8f3..5025e0e 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -17,4 +17,15 @@ config XILINX_VCU
 	  To compile this driver as a module, choose M here: the
 	  module will be called xlnx_vcu.
 
+config ZYNQMP_POWER
+	bool "Enable Xilinx Zynq MPSoC Power Management driver"
+	depends on PM && ARCH_ZYNQMP
+	default y
+	help
+	  Say yes to enable power management support for ZyqnMP SoC.
+	  This driver uses firmware driver as an interface for power
+	  management request to firmware. It registers isr to handle
+	  power management callbacks from firmware.
+	  If in doubt, say N.
+
 endmenu
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index dee8fd5..428b9db 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_XILINX_VCU)	+= xlnx_vcu.o
+obj-$(CONFIG_ZYNQMP_POWER)	+= zynqmp_power.o
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
new file mode 100644
index 0000000..771cb59
--- /dev/null
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Power Management
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajan.vaja@xilinx.com>
+ */
+
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/suspend.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+enum pm_suspend_mode {
+	PM_SUSPEND_MODE_FIRST = 0,
+	PM_SUSPEND_MODE_STD = PM_SUSPEND_MODE_FIRST,
+	PM_SUSPEND_MODE_POWER_OFF,
+};
+
+#define PM_SUSPEND_MODE_FIRST	PM_SUSPEND_MODE_STD
+
+static const char *const suspend_modes[] = {
+	[PM_SUSPEND_MODE_STD] = "standard",
+	[PM_SUSPEND_MODE_POWER_OFF] = "power-off",
+};
+
+static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD;
+
+enum pm_api_cb_id {
+	PM_INIT_SUSPEND_CB = 30,
+	PM_ACKNOWLEDGE_CB,
+	PM_NOTIFY_CB,
+};
+
+static void zynqmp_pm_get_callback_data(u32 *buf)
+{
+	zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf);
+}
+
+static irqreturn_t zynqmp_pm_isr(int irq, void *data)
+{
+	u32 payload[CB_PAYLOAD_SIZE];
+
+	zynqmp_pm_get_callback_data(payload);
+
+	/* First element is callback API ID, others are callback arguments */
+	if (payload[0] == PM_INIT_SUSPEND_CB) {
+		switch (payload[1]) {
+		case SUSPEND_SYSTEM_SHUTDOWN:
+			orderly_poweroff(true);
+			break;
+		case SUSPEND_POWER_REQUEST:
+			pm_suspend(PM_SUSPEND_MEM);
+			break;
+		default:
+			pr_err("%s Unsupported InitSuspendCb reason "
+				"code %d\n", __func__, payload[1]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t suspend_mode_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	char *s = buf;
+	int md;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md]) {
+			if (md == suspend_mode)
+				s += sprintf(s, "[%s] ", suspend_modes[md]);
+			else
+				s += sprintf(s, "%s ", suspend_modes[md]);
+		}
+
+	/* Convert last space to newline */
+	if (s != buf)
+		*(s - 1) = '\n';
+	return (s - buf);
+}
+
+static ssize_t suspend_mode_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int md, ret = -EINVAL;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->set_suspend_mode)
+		return ret;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md] &&
+		    sysfs_streq(suspend_modes[md], buf)) {
+			ret = 0;
+			break;
+		}
+
+	if (!ret && md != suspend_mode) {
+		ret = eemi_ops->set_suspend_mode(md);
+		if (likely(!ret))
+			suspend_mode = md;
+	}
+
+	return ret ? ret : count;
+}
+
+static DEVICE_ATTR_RW(suspend_mode);
+
+static int zynqmp_pm_probe(struct platform_device *pdev)
+{
+	int ret, irq;
+	u32 pm_api_version;
+
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize)
+		return -ENXIO;
+
+	eemi_ops->init_finalize();
+	eemi_ops->get_api_version(&pm_api_version);
+
+	/* Check PM API version number */
+	if (pm_api_version < ZYNQMP_PM_VERSION)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return -ENXIO;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, zynqmp_pm_isr,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					dev_name(&pdev->dev), &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "devm_request_threaded_irq '%d' failed "
+			"with %d\n", irq, ret);
+		return ret;
+	}
+
+	ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to create sysfs interface\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zynqmp_pm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+
+	return 0;
+}
+
+static const struct of_device_id pm_of_match[] = {
+	{ .compatible = "xlnx,zynqmp-power", },
+	{ /* end of table */ },
+};
+MODULE_DEVICE_TABLE(of, pm_of_match);
+
+static struct platform_driver zynqmp_pm_platform_driver = {
+	.probe = zynqmp_pm_probe,
+	.remove = zynqmp_pm_remove,
+	.driver = {
+		.name = "zynqmp_power",
+		.of_match_table = pm_of_match,
+	},
+};
+module_platform_driver(zynqmp_pm_platform_driver);
-- 
2.7.4

[PATCH v5 3/3] drivers: soc: xilinx: Add ZynqMP PM driver

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 drivers/soc/xilinx/Kconfig        |  11 +++
 drivers/soc/xilinx/Makefile       |   1 +
 drivers/soc/xilinx/zynqmp_power.c | 178 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+)
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 687c8f3..5025e0e 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -17,4 +17,15 @@ config XILINX_VCU
 	  To compile this driver as a module, choose M here: the
 	  module will be called xlnx_vcu.
 
+config ZYNQMP_POWER
+	bool "Enable Xilinx Zynq MPSoC Power Management driver"
+	depends on PM && ARCH_ZYNQMP
+	default y
+	help
+	  Say yes to enable power management support for ZyqnMP SoC.
+	  This driver uses firmware driver as an interface for power
+	  management request to firmware. It registers isr to handle
+	  power management callbacks from firmware.
+	  If in doubt, say N.
+
 endmenu
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index dee8fd5..428b9db 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_XILINX_VCU)	+= xlnx_vcu.o
+obj-$(CONFIG_ZYNQMP_POWER)	+= zynqmp_power.o
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
new file mode 100644
index 0000000..771cb59
--- /dev/null
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Power Management
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajan.vaja@xilinx.com>
+ */
+
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/suspend.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+enum pm_suspend_mode {
+	PM_SUSPEND_MODE_FIRST = 0,
+	PM_SUSPEND_MODE_STD = PM_SUSPEND_MODE_FIRST,
+	PM_SUSPEND_MODE_POWER_OFF,
+};
+
+#define PM_SUSPEND_MODE_FIRST	PM_SUSPEND_MODE_STD
+
+static const char *const suspend_modes[] = {
+	[PM_SUSPEND_MODE_STD] = "standard",
+	[PM_SUSPEND_MODE_POWER_OFF] = "power-off",
+};
+
+static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD;
+
+enum pm_api_cb_id {
+	PM_INIT_SUSPEND_CB = 30,
+	PM_ACKNOWLEDGE_CB,
+	PM_NOTIFY_CB,
+};
+
+static void zynqmp_pm_get_callback_data(u32 *buf)
+{
+	zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf);
+}
+
+static irqreturn_t zynqmp_pm_isr(int irq, void *data)
+{
+	u32 payload[CB_PAYLOAD_SIZE];
+
+	zynqmp_pm_get_callback_data(payload);
+
+	/* First element is callback API ID, others are callback arguments */
+	if (payload[0] == PM_INIT_SUSPEND_CB) {
+		switch (payload[1]) {
+		case SUSPEND_SYSTEM_SHUTDOWN:
+			orderly_poweroff(true);
+			break;
+		case SUSPEND_POWER_REQUEST:
+			pm_suspend(PM_SUSPEND_MEM);
+			break;
+		default:
+			pr_err("%s Unsupported InitSuspendCb reason "
+				"code %d\n", __func__, payload[1]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t suspend_mode_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	char *s = buf;
+	int md;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md]) {
+			if (md == suspend_mode)
+				s += sprintf(s, "[%s] ", suspend_modes[md]);
+			else
+				s += sprintf(s, "%s ", suspend_modes[md]);
+		}
+
+	/* Convert last space to newline */
+	if (s != buf)
+		*(s - 1) = '\n';
+	return (s - buf);
+}
+
+static ssize_t suspend_mode_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int md, ret = -EINVAL;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->set_suspend_mode)
+		return ret;
+
+	for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
+		if (suspend_modes[md] &&
+		    sysfs_streq(suspend_modes[md], buf)) {
+			ret = 0;
+			break;
+		}
+
+	if (!ret && md != suspend_mode) {
+		ret = eemi_ops->set_suspend_mode(md);
+		if (likely(!ret))
+			suspend_mode = md;
+	}
+
+	return ret ? ret : count;
+}
+
+static DEVICE_ATTR_RW(suspend_mode);
+
+static int zynqmp_pm_probe(struct platform_device *pdev)
+{
+	int ret, irq;
+	u32 pm_api_version;
+
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize)
+		return -ENXIO;
+
+	eemi_ops->init_finalize();
+	eemi_ops->get_api_version(&pm_api_version);
+
+	/* Check PM API version number */
+	if (pm_api_version < ZYNQMP_PM_VERSION)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return -ENXIO;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, zynqmp_pm_isr,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					dev_name(&pdev->dev), &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "devm_request_threaded_irq '%d' failed "
+			"with %d\n", irq, ret);
+		return ret;
+	}
+
+	ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to create sysfs interface\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zynqmp_pm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr);
+
+	return 0;
+}
+
+static const struct of_device_id pm_of_match[] = {
+	{ .compatible = "xlnx,zynqmp-power", },
+	{ /* end of table */ },
+};
+MODULE_DEVICE_TABLE(of, pm_of_match);
+
+static struct platform_driver zynqmp_pm_platform_driver = {
+	.probe = zynqmp_pm_probe,
+	.remove = zynqmp_pm_remove,
+	.driver = {
+		.name = "zynqmp_power",
+		.of_match_table = pm_of_match,
+	},
+};
+module_platform_driver(zynqmp_pm_platform_driver);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Michal Simek]

On 14. 01. 19 20:22, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
> 
> Add Xilinx ZynqMP firmware APIs to set suspend mode
> and inform firmware that master has initialized its
> own power management.
> 
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
>  2 files changed, 49 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 84b3fd2..c7a3b6c 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
>  	return ret;
>  }
>  
> +/**
> + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> + *			       master has initialized its own power management
> + *
> + * This API function is to be used for notify the power management controller
> + * about the completed power management initialization.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_init_finalize(void)
> +{
> +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> +}
> +
> +/**
> + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> + * @mode:	Mode to set for system suspend
> + *
> + * This API function is used to set mode of system suspend.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_set_suspend_mode(u32 mode)
> +{
> +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
> +}
> +
>  static const struct zynqmp_eemi_ops eemi_ops = {
>  	.get_api_version = zynqmp_pm_get_api_version,
>  	.query_data = zynqmp_pm_query_data,
> @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
>  	.clock_getrate = zynqmp_pm_clock_getrate,
>  	.clock_setparent = zynqmp_pm_clock_setparent,
>  	.clock_getparent = zynqmp_pm_clock_getparent,
> +	.init_finalize = zynqmp_pm_init_finalize,
> +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,

This has been created long time ago and there was one more patch in the
middle of this.
I have applied reset driver just now which didn't have any issue that's
why please rebase your patches on the top of this branch
https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.

Thanks,
Michal

Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Michal Simek]

On 14. 01. 19 20:22, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
> 
> Add Xilinx ZynqMP firmware APIs to set suspend mode
> and inform firmware that master has initialized its
> own power management.
> 
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
>  2 files changed, 49 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 84b3fd2..c7a3b6c 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
>  	return ret;
>  }
>  
> +/**
> + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> + *			       master has initialized its own power management
> + *
> + * This API function is to be used for notify the power management controller
> + * about the completed power management initialization.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_init_finalize(void)
> +{
> +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> +}
> +
> +/**
> + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> + * @mode:	Mode to set for system suspend
> + *
> + * This API function is used to set mode of system suspend.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_set_suspend_mode(u32 mode)
> +{
> +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
> +}
> +
>  static const struct zynqmp_eemi_ops eemi_ops = {
>  	.get_api_version = zynqmp_pm_get_api_version,
>  	.query_data = zynqmp_pm_query_data,
> @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
>  	.clock_getrate = zynqmp_pm_clock_getrate,
>  	.clock_setparent = zynqmp_pm_clock_setparent,
>  	.clock_getparent = zynqmp_pm_clock_getparent,
> +	.init_finalize = zynqmp_pm_init_finalize,
> +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,

This has been created long time ago and there was one more patch in the
middle of this.
I have applied reset driver just now which didn't have any issue that's
why please rebase your patches on the top of this branch
https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.

Thanks,
Michal

Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Michal Simek]

On 14. 01. 19 20:22, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
> 
> Add Xilinx ZynqMP firmware APIs to set suspend mode
> and inform firmware that master has initialized its
> own power management.
> 
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
>  2 files changed, 49 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 84b3fd2..c7a3b6c 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
>  	return ret;
>  }
>  
> +/**
> + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> + *			       master has initialized its own power management
> + *
> + * This API function is to be used for notify the power management controller
> + * about the completed power management initialization.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_init_finalize(void)
> +{
> +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> +}
> +
> +/**
> + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> + * @mode:	Mode to set for system suspend
> + *
> + * This API function is used to set mode of system suspend.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_set_suspend_mode(u32 mode)
> +{
> +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
> +}
> +
>  static const struct zynqmp_eemi_ops eemi_ops = {
>  	.get_api_version = zynqmp_pm_get_api_version,
>  	.query_data = zynqmp_pm_query_data,
> @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
>  	.clock_getrate = zynqmp_pm_clock_getrate,
>  	.clock_setparent = zynqmp_pm_clock_setparent,
>  	.clock_getparent = zynqmp_pm_clock_getparent,
> +	.init_finalize = zynqmp_pm_init_finalize,
> +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,

This has been created long time ago and there was one more patch in the
middle of this.
I have applied reset driver just now which didn't have any issue that's
why please rebase your patches on the top of this branch
https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

Hi Michal,

> -----Original Message-----
> From: Michal Simek [mailto:michal.simek@xilinx.com]
> Sent: Tuesday, January 29, 2019 5:11 AM
> To: Jolly Shah <JOLLYS@xilinx.com>; matthias.bgg@gmail.com;
> andy.gross@linaro.org; shawnguo@kernel.org; geert+renesas@glider.be;
> bjorn.andersson@linaro.org; sean.wang@mediatek.com;
> m.szyprowski@samsung.com; Michal Simek <michals@xilinx.com>;
> robh+dt@kernel.org; mark.rutland@arm.com
> Cc: Rajan Vaja <RAJANV@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rajan Vaja
> <RAJANV@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power
> management APIs
> 
> On 14. 01. 19 20:22, Jolly Shah wrote:
> > From: Rajan Vaja <rajan.vaja@xilinx.com>
> >
> > Add Xilinx ZynqMP firmware APIs to set suspend mode
> > and inform firmware that master has initialized its
> > own power management.
> >
> > Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > ---
> >  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
> >  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
> >  2 files changed, 49 insertions(+)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp.c
> b/drivers/firmware/xilinx/zynqmp.c
> > index 84b3fd2..c7a3b6c 100644
> > --- a/drivers/firmware/xilinx/zynqmp.c
> > +++ b/drivers/firmware/xilinx/zynqmp.c
> > @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id,
> u32 *parent_id)
> >  	return ret;
> >  }
> >
> > +/**
> > + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> > + *			       master has initialized its own power management
> > + *
> > + * This API function is to be used for notify the power management controller
> > + * about the completed power management initialization.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_init_finalize(void)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> > + * @mode:	Mode to set for system suspend
> > + *
> > + * This API function is used to set mode of system suspend.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_set_suspend_mode(u32 mode)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0,
> NULL);
> > +}
> > +
> >  static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.get_api_version = zynqmp_pm_get_api_version,
> >  	.query_data = zynqmp_pm_query_data,
> > @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.clock_getrate = zynqmp_pm_clock_getrate,
> >  	.clock_setparent = zynqmp_pm_clock_setparent,
> >  	.clock_getparent = zynqmp_pm_clock_getparent,
> > +	.init_finalize = zynqmp_pm_init_finalize,
> > +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
> 
> This has been created long time ago and there was one more patch in the
> middle of this.
> I have applied reset driver just now which didn't have any issue that's
> why please rebase your patches on the top of this branch
> https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.
> 

Rebased and sent v6.

Thanks,
Jolly Shah

> Thanks,
> Michal

RE: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

Hi Michal,

> -----Original Message-----
> From: Michal Simek [mailto:michal.simek@xilinx.com]
> Sent: Tuesday, January 29, 2019 5:11 AM
> To: Jolly Shah <JOLLYS@xilinx.com>; matthias.bgg@gmail.com;
> andy.gross@linaro.org; shawnguo@kernel.org; geert+renesas@glider.be;
> bjorn.andersson@linaro.org; sean.wang@mediatek.com;
> m.szyprowski@samsung.com; Michal Simek <michals@xilinx.com>;
> robh+dt@kernel.org; mark.rutland@arm.com
> Cc: Rajan Vaja <RAJANV@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rajan Vaja
> <RAJANV@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power
> management APIs
> 
> On 14. 01. 19 20:22, Jolly Shah wrote:
> > From: Rajan Vaja <rajan.vaja@xilinx.com>
> >
> > Add Xilinx ZynqMP firmware APIs to set suspend mode
> > and inform firmware that master has initialized its
> > own power management.
> >
> > Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > ---
> >  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
> >  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
> >  2 files changed, 49 insertions(+)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp.c
> b/drivers/firmware/xilinx/zynqmp.c
> > index 84b3fd2..c7a3b6c 100644
> > --- a/drivers/firmware/xilinx/zynqmp.c
> > +++ b/drivers/firmware/xilinx/zynqmp.c
> > @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id,
> u32 *parent_id)
> >  	return ret;
> >  }
> >
> > +/**
> > + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> > + *			       master has initialized its own power management
> > + *
> > + * This API function is to be used for notify the power management controller
> > + * about the completed power management initialization.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_init_finalize(void)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> > + * @mode:	Mode to set for system suspend
> > + *
> > + * This API function is used to set mode of system suspend.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_set_suspend_mode(u32 mode)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0,
> NULL);
> > +}
> > +
> >  static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.get_api_version = zynqmp_pm_get_api_version,
> >  	.query_data = zynqmp_pm_query_data,
> > @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.clock_getrate = zynqmp_pm_clock_getrate,
> >  	.clock_setparent = zynqmp_pm_clock_setparent,
> >  	.clock_getparent = zynqmp_pm_clock_getparent,
> > +	.init_finalize = zynqmp_pm_init_finalize,
> > +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
> 
> This has been created long time ago and there was one more patch in the
> middle of this.
> I have applied reset driver just now which didn't have any issue that's
> why please rebase your patches on the top of this branch
> https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.
> 

Rebased and sent v6.

Thanks,
Jolly Shah

> Thanks,
> Michal

RE: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power management APIs

[Jolly Shah]

Hi Michal,

> -----Original Message-----
> From: Michal Simek [mailto:michal.simek@xilinx.com]
> Sent: Tuesday, January 29, 2019 5:11 AM
> To: Jolly Shah <JOLLYS@xilinx.com>; matthias.bgg@gmail.com;
> andy.gross@linaro.org; shawnguo@kernel.org; geert+renesas@glider.be;
> bjorn.andersson@linaro.org; sean.wang@mediatek.com;
> m.szyprowski@samsung.com; Michal Simek <michals@xilinx.com>;
> robh+dt@kernel.org; mark.rutland@arm.com
> Cc: Rajan Vaja <RAJANV@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Rajan Vaja
> <RAJANV@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH v5 2/3] firmware: xilinx: Implement ZynqMP power
> management APIs
> 
> On 14. 01. 19 20:22, Jolly Shah wrote:
> > From: Rajan Vaja <rajan.vaja@xilinx.com>
> >
> > Add Xilinx ZynqMP firmware APIs to set suspend mode
> > and inform firmware that master has initialized its
> > own power management.
> >
> > Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > ---
> >  drivers/firmware/xilinx/zynqmp.c     | 29 +++++++++++++++++++++++++++++
> >  include/linux/firmware/xlnx-zynqmp.h | 20 ++++++++++++++++++++
> >  2 files changed, 49 insertions(+)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp.c
> b/drivers/firmware/xilinx/zynqmp.c
> > index 84b3fd2..c7a3b6c 100644
> > --- a/drivers/firmware/xilinx/zynqmp.c
> > +++ b/drivers/firmware/xilinx/zynqmp.c
> > @@ -428,6 +428,33 @@ static int zynqmp_pm_clock_getparent(u32 clock_id,
> u32 *parent_id)
> >  	return ret;
> >  }
> >
> > +/**
> > + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
> > + *			       master has initialized its own power management
> > + *
> > + * This API function is to be used for notify the power management controller
> > + * about the completed power management initialization.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_init_finalize(void)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
> > + * @mode:	Mode to set for system suspend
> > + *
> > + * This API function is used to set mode of system suspend.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_set_suspend_mode(u32 mode)
> > +{
> > +	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0,
> NULL);
> > +}
> > +
> >  static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.get_api_version = zynqmp_pm_get_api_version,
> >  	.query_data = zynqmp_pm_query_data,
> > @@ -440,6 +467,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.clock_getrate = zynqmp_pm_clock_getrate,
> >  	.clock_setparent = zynqmp_pm_clock_setparent,
> >  	.clock_getparent = zynqmp_pm_clock_getparent,
> > +	.init_finalize = zynqmp_pm_init_finalize,
> > +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
> 
> This has been created long time ago and there was one more patch in the
> middle of this.
> I have applied reset driver just now which didn't have any issue that's
> why please rebase your patches on the top of this branch
> https://github.com/Xilinx/linux-xlnx/commits/zynqmp/soc and resend.
> 

Rebased and sent v6.

Thanks,
Jolly Shah

> Thanks,
> Michal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel