All of lore.kernel.org
 help / color / mirror / Atom feed
From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 6/8] mips: mscc: luton: Add ethernet nodes for Luton.
Date: Wed, 30 Jan 2019 13:29:39 +0100	[thread overview]
Message-ID: <1548851381-21588-7-git-send-email-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <1548851381-21588-1-git-send-email-horatiu.vultur@microchip.com>

Add nodes for pcb090 and pcb091. There is currently no support
in Linux for this SoC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 arch/mips/dts/luton_pcb090.dts |  51 +++++++++++++
 arch/mips/dts/luton_pcb091.dts |  51 +++++++++++++
 arch/mips/dts/mscc,luton.dtsi  | 165 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 267 insertions(+)

diff --git a/arch/mips/dts/luton_pcb090.dts b/arch/mips/dts/luton_pcb090.dts
index 951d8da..315172b 100644
--- a/arch/mips/dts/luton_pcb090.dts
+++ b/arch/mips/dts/luton_pcb090.dts
@@ -55,3 +55,54 @@
 	};
 };
 
+&mdio0 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
+
+&port4 {
+	phy-handle = <&phy4>;
+};
+
+&port5 {
+	phy-handle = <&phy5>;
+};
+
+&port6 {
+	phy-handle = <&phy6>;
+};
+
+&port7 {
+	phy-handle = <&phy7>;
+};
+
+&port8 {
+	phy-handle = <&phy8>;
+};
+
+&port9 {
+	phy-handle = <&phy9>;
+};
+
+&port10 {
+	phy-handle = <&phy10>;
+};
+
+&port11 {
+	phy-handle = <&phy11>;
+};
diff --git a/arch/mips/dts/luton_pcb091.dts b/arch/mips/dts/luton_pcb091.dts
index bf638b2..9b4d628 100644
--- a/arch/mips/dts/luton_pcb091.dts
+++ b/arch/mips/dts/luton_pcb091.dts
@@ -61,3 +61,54 @@
 	};
 };
 
+&mdio0 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
+
+&port4 {
+	phy-handle = <&phy4>;
+};
+
+&port5 {
+	phy-handle = <&phy5>;
+};
+
+&port6 {
+	phy-handle = <&phy6>;
+};
+
+&port7 {
+	phy-handle = <&phy7>;
+};
+
+&port8 {
+	phy-handle = <&phy8>;
+};
+
+&port9 {
+	phy-handle = <&phy9>;
+};
+
+&port10 {
+	phy-handle = <&phy10>;
+};
+
+&port11 {
+	phy-handle = <&phy11>;
+};
diff --git a/arch/mips/dts/mscc,luton.dtsi b/arch/mips/dts/mscc,luton.dtsi
index d11ec48..de354fe 100644
--- a/arch/mips/dts/mscc,luton.dtsi
+++ b/arch/mips/dts/mscc,luton.dtsi
@@ -92,5 +92,170 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		switch: switch at 1010000 {
+			compatible = "mscc,vsc7527-switch";
+			reg = <0x1e0000 0x0100>, // VTSS_TO_DEV_0
+			      <0x1f0000 0x0100>, // VTSS_TO_DEV_1
+			      <0x200000 0x0100>, // VTSS_TO_DEV_2
+			      <0x210000 0x0100>, // VTSS_TO_DEV_3
+			      <0x220000 0x0100>, // VTSS_TO_DEV_4
+			      <0x230000 0x0100>, // VTSS_TO_DEV_5
+			      <0x240000 0x0100>, // VTSS_TO_DEV_6
+			      <0x250000 0x0100>, // VTSS_TO_DEV_7
+			      <0x260000 0x0100>, // VTSS_TO_DEV_8
+			      <0x270000 0x0100>, // VTSS_TO_DEV_9
+			      <0x280000 0x0100>, // VTSS_TO_DEV_10
+			      <0x290000 0x0100>, // VTSS_TO_DEV_11
+			      <0x2a0000 0x0100>, // VTSS_TO_DEV_12
+			      <0x2b0000 0x0100>, // VTSS_TO_DEV_13
+			      <0x2c0000 0x0100>, // VTSS_TO_DEV_14
+			      <0x2d0000 0x0100>, // VTSS_TO_DEV_15
+			      <0x2e0000 0x0100>, // VTSS_TO_DEV_16
+			      <0x2f0000 0x0100>, // VTSS_TO_DEV_17
+			      <0x300000 0x0100>, // VTSS_TO_DEV_18
+			      <0x310000 0x0100>, // VTSS_TO_DEV_19
+			      <0x320000 0x0100>, // VTSS_TO_DEV_20
+			      <0x330000 0x0100>, // VTSS_TO_DEV_21
+			      <0x340000 0x0100>, // VTSS_TO_DEV_22
+			      <0x350000 0x0100>, // VTSS_TO_DEV_23
+			      <0x010000 0x1000>, // VTSS_TO_SYS
+			      <0x020000 0x1000>, // VTSS_TO_ANA
+			      <0x030000 0x1000>, // VTSS_TO_REW
+			      <0x070000 0x1000>, // VTSS_TO_DEVCPU_GCB
+			      <0x080000 0x0100>, // VTSS_TO_DEVCPU_QS
+			      <0x0a0000 0x0100>; // VTSS_TO_HSIO
+			reg-names = "port0", "port1", "port2", "port3",
+				    "port4", "port5", "port6", "port7",
+				    "port8", "port9", "port10", "port11",
+				    "port12", "port13", "port14", "port15",
+				    "port16", "port17", "port18", "port19",
+				    "port20", "port21", "port22", "port23",
+				    "sys", "ana", "rew", "gcb", "qs", "hsio";
+			status = "okay";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port at 0 {
+					reg = <0>;
+				};
+				port1: port at 1 {
+					reg = <1>;
+				};
+				port2: port at 2 {
+					reg = <2>;
+				};
+				port3: port at 3 {
+					reg = <3>;
+				};
+				port4: port at 4 {
+					reg = <4>;
+				};
+				port5: port at 5 {
+					reg = <5>;
+				};
+				port6: port at 6 {
+					reg = <6>;
+				};
+				port7: port at 7 {
+					reg = <7>;
+				};
+				port8: port at 8 {
+					reg = <8>;
+				};
+				port9: port at 9 {
+					reg = <9>;
+				};
+				port10: port at 10 {
+					reg = <10>;
+				};
+				port11: port at 11 {
+					reg = <11>;
+				};
+				port12: port at 12 {
+					reg = <12>;
+				};
+				port13: port at 13 {
+					reg = <13>;
+				};
+				port14: port at 14 {
+					reg = <14>;
+				};
+				port15: port at 15 {
+					reg = <15>;
+				};
+				port16: port at 16 {
+					reg = <16>;
+				};
+				port17: port at 17 {
+					reg = <17>;
+				};
+				port18: port at 18 {
+					reg = <18>;
+				};
+				port19: port at 19 {
+					reg = <19>;
+				};
+				port20: port at 20 {
+					reg = <20>;
+				};
+				port21: port at 21 {
+					reg = <21>;
+				};
+				port22: port at 22 {
+					reg = <22>;
+				};
+				port23: port at 23 {
+					reg = <23>;
+				};
+			};
+		};
+
+		mdio0: mdio at 700a0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,luton-miim";
+			reg = <0x700a0 0x24>;
+			status = "disabled";
+
+			phy0: ethernet-phy at 0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy at 1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy at 2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy at 3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy at 4 {
+				reg = <4>;
+			};
+			phy5: ethernet-phy at 5 {
+				reg = <5>;
+			};
+			phy6: ethernet-phy at 6 {
+				reg = <6>;
+			};
+			phy7: ethernet-phy at 7 {
+				reg = <7>;
+			};
+			phy8: ethernet-phy at 8 {
+				reg = <8>;
+			};
+			phy9: ethernet-phy at 9 {
+				reg = <9>;
+			};
+			phy10: ethernet-phy at 10 {
+				reg = <10>;
+			};
+			phy11: ethernet-phy at 11 {
+				reg = <11>;
+			};
+		};
 	};
 };
-- 
2.7.4

  parent reply	other threads:[~2019-01-30 12:29 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-30 12:29 [U-Boot] [PATCH v2 0/8] Add network support for Luton SoCs Horatiu Vultur
2019-01-30 12:29 ` [U-Boot] [PATCH v2 1/8] net: mscc: Move ocelot_switch to mscc_switch folder Horatiu Vultur
2019-01-30 12:29 ` [U-Boot] [PATCH v2 2/8] net: mscc: Move miim commands into separate file Horatiu Vultur
2019-01-30 12:29 ` [U-Boot] [PATCH v2 3/8] net: mscc: Move ocelot_send and ocelot_recv in a different file Horatiu Vultur
2019-01-30 12:29 ` [U-Boot] [PATCH v2 4/8] net: mscc: Move mac_table_add function into " Horatiu Vultur
2019-01-30 12:29 ` [U-Boot] [PATCH v2 5/8] net: mscc: Remove unused variables Horatiu Vultur
2019-01-30 12:29 ` Horatiu Vultur [this message]
2019-01-30 12:29 ` [U-Boot] [PATCH v2 7/8] net: Add MSCC Luton networkd driver Horatiu Vultur
2019-01-30 16:22   ` Daniel Schwierzeck
2019-01-30 12:29 ` [U-Boot] [PATCH v2 8/8] configs: mscc_luton: Add network support Horatiu Vultur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548851381-21588-7-git-send-email-horatiu.vultur@microchip.com \
    --to=horatiu.vultur@microchip.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.