From mboxrd@z Thu Jan 1 00:00:00 1970 From: Abel Vesa Date: Wed, 30 Jan 2019 13:40:00 +0000 Subject: [U-Boot] [PATCH v3 10/22] arm: imx: Add FIT SPL its In-Reply-To: <1548855578-12529-1-git-send-email-abel.vesa@nxp.com> References: <1548855578-12529-1-git-send-email-abel.vesa@nxp.com> Message-ID: <1548855578-12529-11-git-send-email-abel.vesa@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add simple its in order to allow SPL to boot u-boot proper via FIT table. Signed-off-by: Abel Vesa Reviewed-by: Peng Fan --- arch/arm/mach-imx/mx6/fit_spl.its | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its diff --git a/arch/arm/mach-imx/mx6/fit_spl.its b/arch/arm/mach-imx/mx6/fit_spl.its new file mode 100644 index 0000000..bf3ffee --- /dev/null +++ b/arch/arm/mach-imx/mx6/fit_spl.its @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2018 NXP + * + * Simple U-boot fit source file containing U-Boot (with dtb appended) + */ + +/dts-v1/; + +/ { + description = "Image for u-boot proper (with dtb appended)"; + #address-cells = <1>; + + images { + #address-cells = <1>; + #size-cells = <0>; + + uboot at 1 { + reg = <0>; + description = "U-Boot"; + data = /incbin/("../../../../u-boot-fit-dtb.bin"); + type = "standalone"; + os = "U-Boot"; + compression = "none"; + arch = "arm"; + load = <0x17800000>; + }; + }; + + configurations { + #address-cells = <1>; + #size-cells = <0>; + + default = "conf at 1"; + + conf at 1 { + reg = <0>; + description = "i.MX armv7"; + loadables = "uboot at 1"; + }; + }; +}; -- 2.7.4