[U-Boot] [PATCH v3 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE

[Abel Vesa <abel.vesa@nxp.com>]

Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL,
makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE.
Everything that is not part of the usb storage support in SPL is now
build under SPL_USB_HOST_SUPPORT.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/include/asm/arch-am33xx/spl.h    | 2 +-
 arch/arm/mach-omap2/boot-common.c         | 2 +-
 common/Makefile                           | 5 +++--
 common/spl/Kconfig                        | 4 ++--
 common/spl/Makefile                       | 2 +-
 common/spl/spl_usb.c                      | 4 ----
 configs/am43xx_evm_usbhost_boot_defconfig | 2 +-
 configs/am43xx_hs_evm_defconfig           | 2 +-
 8 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 0bf8c17..f3910c2 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -62,7 +62,7 @@
 #define BOOT_DEVICE_CPGMAC	0x47
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
-#ifdef CONFIG_SPL_USB_SUPPORT
+#ifdef CONFIG_SPL_USB_STORAGE
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_USB
 #else
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 2db1922..c8b8ac6 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -93,7 +93,7 @@ void save_omap_boot_params(void)
 			sys_boot_device = 1;
 			break;
 #endif
-#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
+#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
 		case BOOT_DEVICE_USB:
 			sys_boot_device = 1;
 			break;
diff --git a/common/Makefile b/common/Makefile
index ad390d0..8c92feb 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -75,8 +75,9 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 
 ifdef CONFIG_SPL_USB_HOST_SUPPORT
-obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
-obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+obj-y += usb.o
+obj-y += usb_hub.o
+obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
 else
 obj-$(CONFIG_USB_MUSB_HOST) += usb.o
 endif
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 54b0dc3..8b0627e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -766,9 +766,9 @@ config SPL_USB_HOST_SUPPORT
 	  device can be attached. This option enables the drivers in
 	  drivers/usb/host as part of an SPL build.
 
-config SPL_USB_SUPPORT
+config SPL_USB_STORAGE
 	bool "Support loading from USB"
-	depends on SPL_USB_HOST_SUPPORT
+	depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
 	help
 	  Enable support for USB devices in SPL. This allows use of USB
 	  devices such as hard drives and flash drivers for loading U-Boot.
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 6f8d759..a3980ce 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
 obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
 obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
-obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
+obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
 obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
diff --git a/common/spl/spl_usb.c b/common/spl/spl_usb.c
index c8d8231..e29d579 100644
--- a/common/spl/spl_usb.c
+++ b/common/spl/spl_usb.c
@@ -15,9 +15,7 @@
 #include <usb.h>
 #include <fat.h>
 
-#ifdef CONFIG_USB_STORAGE
 static int usb_stor_curr_dev = -1; /* current device */
-#endif
 
 static int spl_usb_load_image(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
@@ -34,13 +32,11 @@ static int spl_usb_load_image(struct spl_image_info *spl_image,
 		return err;
 	}
 
-#ifdef CONFIG_USB_STORAGE
 	/* try to recognize storage devices immediately */
 	usb_stor_curr_dev = usb_stor_scan(1);
 	stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, usb_stor_curr_dev);
 	if (!stor_dev)
 		return -ENODEV;
-#endif
 
 	debug("boot mode - FAT\n");
 
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index 5131f19..5bd919b 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -14,7 +14,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00100000
 CONFIG_CMD_SPL_WRITE_SIZE=0x40000
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 99e4ccb..c01fda9 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -24,7 +24,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y
 # CONFIG_CMD_FLASH is not set
-- 
2.7.4