All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 70/76] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
Date: Tue,  5 Feb 2019 19:15:20 +0100	[thread overview]
Message-ID: <1549390526-24246-71-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1549390526-24246-1-git-send-email-pbonzini@redhat.com>

Create separate variables for these components, they are
used in many boards but not all.  This allows finer-grain
selection of the included code with default-configs/*.mak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 default-configs/arm-softmmu.mak         | 1 +
 default-configs/i386-softmmu.mak        | 2 ++
 default-configs/mips-softmmu-common.mak | 2 ++
 default-configs/ppc-softmmu.mak         | 1 +
 hw/i2c/Makefile.objs                    | 5 +++--
 5 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1db3639..d700d09 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -151,6 +151,7 @@ CONFIG_ACPI=y
 CONFIG_ARM_VIRT=y
 CONFIG_SMBIOS=y
 CONFIG_ASPEED_SOC=y
+CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 71c9f6f..15b6287 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -62,6 +62,8 @@ CONFIG_I82801B11=y
 CONFIG_SMBIOS=y
 CONFIG_PXB=y
 CONFIG_ACPI_VMGENID=y
+CONFIG_ACPI_SMBUS=y
+CONFIG_SMBUS_EEPROM=y
 CONFIG_FW_CFG_DMA=y
 CONFIG_I2C=y
 CONFIG_SEV=$(CONFIG_KVM)
diff --git a/default-configs/mips-softmmu-common.mak b/default-configs/mips-softmmu-common.mak
index 479fb4d..ded7498 100644
--- a/default-configs/mips-softmmu-common.mak
+++ b/default-configs/mips-softmmu-common.mak
@@ -39,3 +39,5 @@ CONFIG_I2C=y
 CONFIG_R4K=y
 CONFIG_MALTA=y
 CONFIG_MIPSSIM=y
+CONFIG_ACPI_SMBUS=y
+CONFIG_SMBUS_EEPROM=y
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index 7f80f0c..52acb7c 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -36,6 +36,7 @@ CONFIG_AT24C=y
 CONFIG_BITBANG_I2C=y
 CONFIG_M41T80=y
 CONFIG_VGA_CIRRUS=y
+CONFIG_SMBUS_EEPROM=y
 
 # For Macs
 CONFIG_ESCC=y
diff --git a/hw/i2c/Makefile.objs b/hw/i2c/Makefile.objs
index 82e747e..cecee48 100644
--- a/hw/i2c/Makefile.objs
+++ b/hw/i2c/Makefile.objs
@@ -1,8 +1,9 @@
-common-obj-$(CONFIG_I2C) += core.o smbus.o smbus_eeprom.o
+common-obj-$(CONFIG_I2C) += core.o smbus.o
+common-obj-$(CONFIG_SMBUS_EEPROM) += smbus_eeprom.o
 common-obj-$(CONFIG_DDC) += i2c-ddc.o
 common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
 common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o
-common-obj-$(CONFIG_APM) += pm_smbus.o
+common-obj-$(CONFIG_ACPI_SMBUS) += pm_smbus.o
 common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o
 common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o
 common-obj-$(CONFIG_IMX_I2C) += imx_i2c.o
-- 
1.8.3.1

  parent reply	other threads:[~2019-02-05 18:16 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-05 18:14 [Qemu-devel] [PULL v2 00/76] misc patches for 2019-02-04 Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 01/76] vhost-user-test: use g_cond_broadcast Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 02/76] vhost-user-test: signal data_cond when s->rings changes Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 03/76] vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIAN Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 04/76] vhost-user-test: skip if there is no memory at address 0 Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 05/76] vhost-user-test: reduce usage of global_qtest Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 06/76] tap: flush STDOUT on newline Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 07/76] cpu-exec: add assert_no_pages_locked() after longjmp Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 08/76] cpu-exec: reset BQL after longjmp in cpu_exec_step_atomic Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 09/76] configure: Add a proper check for openpty() in libutil Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 10/76] cpus: ignore ESRCH in qemu_cpu_kick_thread() Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 11/76] elf: Add optional function ptr to load_elf() to parse ELF notes Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 12/76] elf-ops.h: Add get_elf_note_type() Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 13/76] pvh: Add x86/HVM direct boot ABI header file Paolo Bonzini
2019-03-01 16:53   ` Alex Bennée
2019-03-01 17:13     ` Stefano Garzarella
2019-03-01 17:56       ` Alex Bennée
2019-03-02 10:17         ` Stefano Garzarella
2019-02-05 18:14 ` [Qemu-devel] [PULL 14/76] pvh: Boot uncompressed kernel using direct boot ABI Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 15/76] pvh: load initrd and expose it through fw_cfg Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 16/76] linuxboot_dma: remove duplicate definitions of FW_CFG Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 17/76] linuxboot_dma: move common functions in a new header Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 18/76] optionrom: add new PVH option rom Paolo Bonzini
2021-03-19 14:06   ` Philippe Mathieu-Daudé
2021-03-19 14:37     ` Stefano Garzarella
2021-03-19 15:51     ` Stefano Garzarella
2021-03-19 17:03     ` Paolo Bonzini
2021-03-19 17:35       ` Stefano Garzarella
2021-03-19 17:52         ` Paolo Bonzini
2021-03-19 18:20           ` Stefano Garzarella
2021-03-19 18:25             ` Stefano Garzarella
2021-03-22 10:59               ` Stefano Garzarella
2021-03-22 11:52                 ` Paolo Bonzini
2021-03-22 13:57                   ` Stefano Garzarella
2021-03-22 16:26                     ` Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 19/76] hw/i386/pc: use " Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 20/76] optionrom/pvh: load initrd from fw_cfg Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 21/76] hw/i386/pc: enable PVH only for machine type >= 4.0 Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 22/76] i386: remove the new CPUID 'PCONFIG' from Icelake-Server CPU model Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 23/76] i386: remove the 'INTEL_PT' CPUID bit from named CPU models Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 24/76] Revert "i386: Add CPUID bit for PCONFIG" Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 25/76] target-i386: hvf: remove MPX support Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 26/76] contrib/elf2dmp: fix elf.h including Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 27/76] contrib/elf2dmp: use GLib in ELF processing Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 28/76] contrib/elf2dmp: use GLib in PDB processing Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 29/76] contrib/elf2dmp: fix structures definitions Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 31/76] configure: enable elf2dmp build for Windows hosts Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 32/76] monitor: do not use QTAILQ_FOREACH_SAFE across critical sections Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 33/76] crypto: finish removing TABs Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 34/76] ui: vnc: " Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 35/76] unify len and addr type for memory/address APIs Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 36/76] hw/core/loader.c: Read as long as possible in load_image_size() Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 37/76] i386: import & use bootparam.h Paolo Bonzini
2019-02-14 16:40   ` Peter Maydell
2019-02-14 16:50     ` Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 38/76] i386: allow to load initrd below 4 GB for recent linux Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 39/76] docker: adjust Xen repository for CentOS 7 Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 40/76] i386: hvf: Don't miss 16-bit displacement Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 41/76] gdbstub: Fix i386/x86_64 machine description and add control registers Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 42/76] scsi-generic: avoid possible out-of-bounds access to r->buf Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 43/76] Remove deprecated -enable-hax option Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 44/76] qemu-options: Remove deprecated "-virtioconsole" option Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 45/76] arm: disable CONFIG_SERIAL_ISA Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 46/76] ide: split ioport registration to a separate file Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 47/76] vfio: move conditional up to hw/Makefile.objs Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 48/76] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Paolo Bonzini
2019-02-05 18:14 ` [Qemu-devel] [PULL 49/76] build: actually use CONFIG_PAM Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 50/76] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 51/76] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 52/76] hw/m68k/Makefile.objs: Conditionally build boards Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 53/76] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 54/76] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 55/76] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 56/76] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 57/76] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 58/76] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 59/76] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 60/76] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 61/76] hw/nios2/Makefile.objs: Conditionally build nios2 Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 62/76] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 63/76] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 64/76] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 65/76] hw/cris/Makefile.objs: Create CONFIG_* for cris Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 66/76] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 67/76] hw/moxie/Makefile.objs: Conditionally build moxie Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 68/76] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 69/76] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Paolo Bonzini
2019-02-05 18:15 ` Paolo Bonzini [this message]
2019-02-05 18:15 ` [Qemu-devel] [PULL 71/76] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 72/76] i386: hvf: Fix smp boot hangs Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 73/76] pc: Use hotplug_handler_(plug|unplug|unplug_request) Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 74/76] scsi-disk: Convert from DPRINTF() macro to trace events Paolo Bonzini
2019-02-05 18:15 ` [Qemu-devel] [PULL 76/76] queue: fix QTAILQ_FOREACH_REVERSE_SAFE Paolo Bonzini
2019-02-05 20:01 ` [Qemu-devel] [PULL v2 00/76] misc patches for 2019-02-04 Peter Maydell
2019-02-05 20:05   ` Peter Maydell
2019-02-05 20:26     ` Paolo Bonzini
2019-02-11 16:29     ` David Hildenbrand
2019-02-11 16:33       ` Peter Maydell
2019-02-11 16:50         ` David Hildenbrand
2019-02-07 10:34 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1549390526-24246-71-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.