From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ley Foon Tan <ley.foon.tan@intel.com>
Date: Thu, 14 Mar 2019 02:17:48 +0800
Subject: [U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver
In-Reply-To: <CAAh8qsw-O9hn4r5skvGKVfqj4FxcJ4BW7NTC1kBj0ghoxnPVeQ@mail.gmail.com>
References: <1552379474-12867-1-git-send-email-ley.foon.tan@intel.com>
 <CAAh8qsw-O9hn4r5skvGKVfqj4FxcJ4BW7NTC1kBj0ghoxnPVeQ@mail.gmail.com>
Message-ID: <1552501068.5582.28.camel@intel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

On Tue, 2019-03-12 at 12:08 +0100, Simon Goldschmidt wrote:
> On Tue, Mar 12, 2019 at 9:31 AM Ley Foon Tan <ley.foon.tan@intel.com>
> wrote:
> > 
> > 
> > This patchset update Stratix 10 SDRAM driver to support:
> > - Multi-banks memory (Patch [1-8])
> >   - Stratix 10 support up to 2 memory banks:
> >         Bank 0: Address 0, size 2GB
> >         Bank 1: Address 0x100000000, size 124GB
> > - Add warm reset boot checking function, to use in patch [10]
> > (Patch[9])
> > - Add ECC memory scrubbing support (Patch [10])
> >   - Use cache enabled + "DC ZVA" instruction to clear memory to
> > zeros
> When working on this, would it make sense to move the S10 SDRAM
> driver
> to DM, using UCLASS_RAM, like I did for gen5 (see Marek's 'next'
> branch:
> http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=commit;h=4796a7d5a7
> fd965c02cf290edec17acb2c9af766)
> 
> That might allow us to combine more of the code in mach-socfpga again
> in the future...
Sure, I will look into this. But will be in separate series.

Thanks.

Regards
Ley Foon
> 
> Regards,
> Simon
> 
> > 
> > 
> > Ley Foon Tan (10):
> >   ddr: altera: stratix10: Move SDRAM size check to SDRAM driver
> >   arm: socfpga: Add sdram_s10.h to sdram.h
> >   ddr: altera: s10: Add multiple memory banks support
> >   arm: socfpga: Update dram_init_banksize() for Stratix10
> >   board: altera: Stratix10: Add board_get_usable_ram_top()
> >   board: altera: Stratix10: Add ft_board_setup()
> >   arm: socfpga: Enable OF_BOARD_SETUP for Stratix 10
> >   configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2
> >   arm: socfpga: stratix10: Add cpu_has_been_warmreset()
> >   ddr: altera: Stratix10: Add ECC memory scrubbing
> > 
> >  arch/arm/mach-socfpga/Kconfig                 |   1 +
> >  arch/arm/mach-socfpga/board.c                 |  16 +-
> >  .../include/mach/reset_manager_s10.h          |   3 +
> >  arch/arm/mach-socfpga/include/mach/sdram.h    |   2 +
> >  .../arm/mach-socfpga/include/mach/sdram_s10.h |  10 +
> >  arch/arm/mach-socfpga/reset_manager_s10.c     |   9 +
> >  arch/arm/mach-socfpga/spl_s10.c               |  11 --
> >  board/altera/stratix10-socdk/socfpga.c        |  37 ++++
> >  configs/socfpga_stratix10_defconfig           |   2 +-
> >  drivers/ddr/altera/sdram_s10.c                | 178
> > ++++++++++++++++++
> >  10 files changed, 256 insertions(+), 13 deletions(-)
> > 
> > --
> > 2.19.0
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot