From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claudiu.Beznea at microchip.com Date: Mon, 25 Mar 2019 10:33:56 +0000 Subject: [U-Boot] [PATCH 1/4] pinctrl: at91: add option to use drive strength bits In-Reply-To: <1553510005-1249-1-git-send-email-claudiu.beznea@microchip.com> References: <1553510005-1249-1-git-send-email-claudiu.beznea@microchip.com> Message-ID: <1553510005-1249-2-git-send-email-claudiu.beznea@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Claudiu Beznea SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea --- drivers/pinctrl/pinctrl-at91.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 4bdad62dc906..8997732376e4 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -50,10 +50,15 @@ struct at91_pinctrl_priv { * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive * strength when there is no dt config for it. */ -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) +enum drive_strength_bit { + DRIVE_STRENGTH_BIT_DEF, + DRIVE_STRENGTH_BIT_LOW, + DRIVE_STRENGTH_BIT_MED, + DRIVE_STRENGTH_BIT_HI, +}; + +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ + DRIVE_STRENGTH_SHIFT) enum at91_mux { AT91_MUX_GPIO = 0, @@ -238,7 +243,7 @@ static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio, /* strength is inverse on SAM9x5s with our defines * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ - setting = DRIVE_STRENGTH_HI - setting; + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting; set_drive_strength(reg, pin, setting); } -- 2.7.4