All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: Leo Li <leoyang.li@nxp.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Roy Pledge <roy.pledge@nxp.com>
Subject: [PATCH] soc: fsl: add DPAA2 console support
Date: Tue, 26 Mar 2019 19:16:19 +0000	[thread overview]
Message-ID: <1553627718-23714-1-git-send-email-ioana.ciornei@nxp.com> (raw)

This patch adds DPAA2 MC and AIOP console log support.

The platform driver probes on the "fsl,dpaa2-console" device tree node
which describes the base firmware address needed in order to infer the
start address of both firmware logs: MC and AIOP.
It then exports two misc char devices which can be used to dump
the needed logs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
---
 drivers/soc/fsl/Kconfig         |  10 ++
 drivers/soc/fsl/Makefile        |   1 +
 drivers/soc/fsl/dpaa2-console.c | 306 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 317 insertions(+)
 create mode 100644 drivers/soc/fsl/dpaa2-console.c

diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 61f8e1433d0a..9fe8222c3968 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -29,4 +29,14 @@ config FSL_MC_DPIO
 	  other DPAA2 objects. This driver does not expose the DPIO
 	  objects individually, but groups them under a service layer
 	  API.
+
+config DPAA2_CONSOLE
+	tristate "QorIQ DPAA2 console driver"
+	depends on OF && (ARCH_LAYERSCAPE || (COMPILE_TEST && (ARM || ARM64 || X86_LOCAL_APIC || PPC)))
+	default y
+	help
+	  Console driver for DPAA2 platforms. Exports 2 char devices,
+	  /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
+	  which can be used to dump the Management Complex and AIOP
+	  firmware logs.
 endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 803ef1bfb5ff..57762c9fc7da 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
 obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
+obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
diff --git a/drivers/soc/fsl/dpaa2-console.c b/drivers/soc/fsl/dpaa2-console.c
new file mode 100644
index 000000000000..21a5e121f87b
--- /dev/null
+++ b/drivers/soc/fsl/dpaa2-console.c
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2015-2016 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+#define pr_fmt(fmt) "dpaa2-console: " fmt
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Roy Pledge <roy.pledge@nxp.com>");
+MODULE_DESCRIPTION("DPAA2 console driver");
+
+/* MC firmware base low/high registers indexes */
+#define MCFBALR_OFFSET 0
+#define MCFBAHR_OFFSET 1
+
+/* Bit masks used to get the most/least significant part of the MC base addr */
+#define MC_FW_ADDR_MASK_HIGH 0x1FFFF
+#define MC_FW_ADDR_MASK_LOW  0xE0000000
+
+#define MC_BUFFER_OFFSET 0x01000000
+#define MC_BUFFER_SIZE   (1024 * 1024 * 16)
+#define MC_OFFSET_DELTA  MC_BUFFER_OFFSET
+
+#define AIOP_BUFFER_OFFSET 0x06000000
+#define AIOP_BUFFER_SIZE   (1024 * 1024 * 16)
+#define AIOP_OFFSET_DELTA  0
+
+#define LOG_HEADER_FLAG_BUFFER_WRAPAROUND 0x80000000
+#define LAST_BYTE(a) ((a) & ~(LOG_HEADER_FLAG_BUFFER_WRAPAROUND))
+
+/* MC and AIOP Magic words */
+#define MAGIC_MC   0x4d430100
+#define MAGIC_AIOP 0x41494F50
+
+struct log_header {
+	__le32 magic_word;
+	char reserved[4];
+	__le32 buf_start;
+	__le32 buf_length;
+	__le32 last_byte;
+};
+
+struct console_data {
+	char *map_addr;
+	struct log_header *hdr;
+	char *start_addr;
+	char *end_addr;
+	char *end_of_data;
+	char *cur_ptr;
+};
+
+struct resource mc_base_addr;
+
+static inline void adjust_end(struct console_data *cd)
+{
+	u32 last_byte = readl(&cd->hdr->last_byte);
+
+	cd->end_of_data = cd->start_addr + LAST_BYTE(last_byte);
+}
+
+static u64 get_mc_fw_base_address(void)
+{
+	u64 mcfwbase = 0ULL;
+	u32 *mcfbaregs;
+
+	mcfbaregs = (u32 *)ioremap(mc_base_addr.start,
+				   resource_size(&mc_base_addr));
+	if (!mcfbaregs) {
+		pr_err("could not map MC Firmaware Base registers\n");
+		return -EIO;
+	}
+
+	mcfwbase  = readl(mcfbaregs + MCFBAHR_OFFSET) & MC_FW_ADDR_MASK_HIGH;
+	mcfwbase <<= 32;
+	mcfwbase |= readl(mcfbaregs + MCFBALR_OFFSET) & MC_FW_ADDR_MASK_LOW;
+	iounmap(mcfbaregs);
+
+	pr_debug("MC base address at 0x%016llx\n", mcfwbase);
+	return mcfwbase;
+}
+
+static ssize_t dpaa2_console_size(struct console_data *cd)
+{
+	ssize_t size;
+
+	if (cd->cur_ptr <= cd->end_of_data)
+		size = cd->end_of_data - cd->cur_ptr;
+	else
+		size = (cd->end_addr - cd->cur_ptr) +
+			(cd->end_of_data - cd->start_addr);
+
+	return size;
+}
+
+static int dpaa2_generic_console_open(struct inode *node, struct file *fp,
+				      u64 offset, u64 size,
+				      u32 expected_magic,
+				      u32 offset_delta)
+{
+	u32 read_magic, wrapped, last_byte, buf_start, buf_length;
+	struct console_data *cd;
+	u64 base_addr;
+	int err;
+
+	cd = kmalloc(sizeof(*cd), GFP_KERNEL);
+	if (!cd)
+		return -ENOMEM;
+
+	base_addr = get_mc_fw_base_address();
+	if (base_addr < 0)
+		return -EIO;
+
+	cd->map_addr = ioremap(base_addr + offset, size);
+	if (!cd->map_addr) {
+		pr_err("cannot map console log memory\n");
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	cd->hdr = (struct log_header *)cd->map_addr;
+	read_magic = readl(&cd->hdr->magic_word);
+	last_byte = readl(&cd->hdr->last_byte);
+	buf_start = readl(&cd->hdr->buf_start);
+	buf_length = readl(&cd->hdr->buf_length);
+
+	if (read_magic != expected_magic) {
+		pr_warn("expected = %08x, read = %08x\n",
+			expected_magic, read_magic);
+		err = -EIO;
+		goto err_magic;
+	}
+
+	cd->start_addr = cd->map_addr + buf_start - offset_delta;
+	cd->end_addr = cd->start_addr + buf_length;
+
+	wrapped = last_byte & LOG_HEADER_FLAG_BUFFER_WRAPAROUND;
+
+	adjust_end(cd);
+	if (wrapped && cd->end_of_data != cd->end_addr)
+		cd->cur_ptr = cd->end_of_data + 1;
+	else
+		cd->cur_ptr = cd->start_addr;
+
+	fp->private_data = cd;
+
+	return 0;
+
+err_magic:
+	iounmap(cd->map_addr);
+
+err_ioremap:
+	kfree(cd);
+
+	return err;
+}
+
+static int dpaa2_mc_console_open(struct inode *node, struct file *fp)
+{
+	return dpaa2_generic_console_open(node, fp,
+					  MC_BUFFER_OFFSET, MC_BUFFER_SIZE,
+					  MAGIC_MC, MC_OFFSET_DELTA);
+}
+
+static int dpaa2_aiop_console_open(struct inode *node, struct file *fp)
+{
+	return dpaa2_generic_console_open(node, fp,
+					  AIOP_BUFFER_OFFSET, AIOP_BUFFER_SIZE,
+					  MAGIC_AIOP, AIOP_OFFSET_DELTA);
+}
+
+static int dpaa2_console_close(struct inode *node, struct file *fp)
+{
+	struct console_data *cd = fp->private_data;
+
+	iounmap(cd->map_addr);
+	kfree(cd);
+	return 0;
+}
+
+static ssize_t dpaa2_console_read(struct file *fp, char __user *buf,
+				  size_t count, loff_t *f_pos)
+{
+	struct console_data *cd = fp->private_data;
+	size_t bytes = dpaa2_console_size(cd);
+	size_t bytes_end = cd->end_addr - cd->cur_ptr;
+	size_t written = 0;
+
+	/* Check if we need to adjust the end of data addr */
+	adjust_end(cd);
+
+	if (cd->end_of_data == cd->cur_ptr)
+		return 0;
+
+	if (count < bytes)
+		bytes = count;
+
+	if (bytes > bytes_end) {
+		if (copy_to_user(buf, cd->cur_ptr, bytes_end))
+			return -EFAULT;
+		buf += bytes_end;
+		cd->cur_ptr = cd->start_addr;
+		bytes -= bytes_end;
+		written += bytes_end;
+	}
+
+	if (copy_to_user(buf, cd->cur_ptr, bytes))
+		return -EFAULT;
+	cd->cur_ptr += bytes;
+	written += bytes;
+
+	return written;
+}
+
+static const struct file_operations dpaa2_mc_console_fops = {
+	.owner          = THIS_MODULE,
+	.open           = dpaa2_mc_console_open,
+	.release        = dpaa2_console_close,
+	.read           = dpaa2_console_read,
+};
+
+static struct miscdevice dpaa2_mc_console_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "dpaa2_mc_console",
+	.fops = &dpaa2_mc_console_fops
+};
+
+static const struct file_operations dpaa2_aiop_console_fops = {
+	.owner          = THIS_MODULE,
+	.open           = dpaa2_aiop_console_open,
+	.release        = dpaa2_console_close,
+	.read           = dpaa2_console_read,
+};
+
+static struct miscdevice dpaa2_aiop_console_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "dpaa2_aiop_console",
+	.fops = &dpaa2_aiop_console_fops
+};
+
+static int dpaa2_console_probe(struct platform_device *pdev)
+{
+	int error;
+
+	error = of_address_to_resource(pdev->dev.of_node, 0, &mc_base_addr);
+	if (error < 0) {
+		pr_err("of_address_to_resource() failed for %pOF with %d\n",
+		       pdev->dev.of_node, error);
+		return error;
+	}
+
+	error = misc_register(&dpaa2_mc_console_dev);
+	if (error) {
+		pr_err("dpaa2-console: cannot register device %s\n",
+		       dpaa2_mc_console_dev.name);
+		goto err_register_mc;
+	}
+
+	error = misc_register(&dpaa2_aiop_console_dev);
+	if (error) {
+		pr_err("dpaa2-console: cannot register device %s\n",
+		       dpaa2_aiop_console_dev.name);
+		goto err_register_aiop;
+	}
+
+	return 0;
+
+err_register_aiop:
+	misc_deregister(&dpaa2_mc_console_dev);
+err_register_mc:
+	return error;
+}
+
+static int dpaa2_console_remove(struct platform_device *pdev)
+{
+	misc_deregister(&dpaa2_mc_console_dev);
+	misc_deregister(&dpaa2_aiop_console_dev);
+
+	return 0;
+}
+
+static const struct of_device_id dpaa2_console_match_table[] = {
+	{ .compatible = "fsl,dpaa2-console",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dpaa2_console_match_table);
+
+static struct platform_driver dpaa2_console_driver = {
+	.driver = {
+		   .name = "dpaa2-console",
+		   .pm = NULL,
+		   .of_match_table = dpaa2_console_match_table,
+		   },
+	.probe = dpaa2_console_probe,
+	.remove = dpaa2_console_remove,
+};
+module_platform_driver(dpaa2_console_driver);
-- 
1.9.1


             reply	other threads:[~2019-03-26 19:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-26 19:16 Ioana Ciornei [this message]
2019-04-03 19:55 ` [PATCH] soc: fsl: add DPAA2 console support Li Yang
2019-04-04 10:48   ` Ioana Ciornei
2019-04-04 18:20     ` Leo Li
2019-04-05  9:05       ` Ioana Ciornei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553627718-23714-1-git-send-email-ioana.ciornei@nxp.com \
    --to=ioana.ciornei@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roy.pledge@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.