[PATCH] usb: dwc2: fix USB core dependencies

[arnd@arndb.de (Arnd Bergmann)]

It is currently possible to configure the dwc2 driver as built-in
when host mode or dual-role is enabled, but the USB core is
a loadable module. This leads to a link failure:

drivers/built-in.o: In function `_dwc2_hcd_start':
:(.text+0x84538): undefined reference to `usb_hcd_resume_root_hub'
drivers/built-in.o: In function `_dwc2_hcd_urb_dequeue':
:(.text+0x84aa0): undefined reference to `usb_hcd_check_unlink_urb'
:(.text+0x84e4c): undefined reference to `usb_hcd_unlink_urb_from_ep'
:(.text+0x84e74): undefined reference to `usb_hcd_giveback_urb'
drivers/built-in.o: In function `dwc2_assign_and_init_hc':
:(.text+0x86b98): undefined reference to `usb_hcd_unmap_urb_for_dma'
drivers/built-in.o: In function `_dwc2_hcd_urb_enqueue':
:(.text+0x8717c): undefined reference to `usb_hcd_link_urb_to_ep'
:(.text+0x872f4): undefined reference to `usb_hcd_unlink_urb_from_ep'
drivers/built-in.o: In function `dwc2_host_complete':
:(.text+0x875d4): undefined reference to `usb_hcd_unlink_urb_from_ep'
:(.text+0x87600): undefined reference to `usb_hcd_giveback_urb'
drivers/built-in.o: In function `dwc2_hcd_init':
:(.text+0x87ba8): undefined reference to `usb_disabled'
:(.text+0x87d38): undefined reference to `usb_create_hcd'
:(.text+0x88094): undefined reference to `usb_add_hcd'
:(.text+0x880dc): undefined reference to `usb_put_hcd'
drivers/built-in.o: In function `dwc2_hcd_remove':
:(.text+0x8821c): undefined reference to `usb_remove_hcd'
:(.text+0x8823c): undefined reference to `usb_put_hcd'
drivers/built-in.o: In function `dwc2_hc_handle_tt_clear.isra.10':
:(.text+0x88e2c): undefined reference to `usb_hub_clear_tt_buffer'
drivers/built-in.o: In function `dwc2_hcd_qtd_add':
:(.text+0x8b554): undefined reference to `usb_calc_bus_time'

To fix the problem, this patch changes the dependencies so that
dwc2 host mode can only be enabled if either the USB core is
built-in or both USB and dwc2 are modules.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index b323c4c11b0a..76b9ba4dc925 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -23,7 +23,7 @@ choice
 
 config USB_DWC2_HOST
 	bool "Host only mode"
-	depends on USB
+	depends on USB=y || (USB_DWC2=m && USB)
 	help
 	  The Designware USB2.0 high-speed host controller
 	  integrated into many SoCs. Select this option if you want the
@@ -42,7 +42,7 @@ config USB_DWC2_PERIPHERAL
 
 config USB_DWC2_DUAL_ROLE
 	bool "Dual Role mode"
-	depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2)
+	depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
 	help
 	  Select this option if you want the driver to work in a dual-role
 	  mode. In this mode both host and gadget features are enabled, and