* [Qemu-devel] [Bug 1824622] [NEW] Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed."
@ 2019-04-13 12:14 Lukas Straub
2019-04-13 12:45 ` [Qemu-devel] [Bug 1824622] " Lukas Straub
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Lukas Straub @ 2019-04-13 12:14 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Hello Everyone,
Now with Qemu 4.0.0-rc3, COLO is finally working so I gave it a try, but the Primary is always crashing during Network use. Typing fast in ssh or running "top" with 0.1 second delay (change with 'd') reliably trigger the crash for me. I use the attached scripts to run Qemu, in my case both primary and secondary run on the same Host for testing purposes. See the files in the attached .tar.bz2 for more Info, they also contain a Coredump.
Regards,
Lukas Straub
Configure CMDline:
./configure --target-list=x86_64-softmmu,i386-softmmu --enable-debug-info
** Affects: qemu
Importance: Undecided
Status: New
** Attachment added: "attachements.tar.bz2"
https://bugs.launchpad.net/bugs/1824622/+attachment/5255425/+files/attachements.tar.bz2
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1824622
Title:
Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion
`event_unhandled_count > 0' failed."
Status in QEMU:
New
Bug description:
Hello Everyone,
Now with Qemu 4.0.0-rc3, COLO is finally working so I gave it a try, but the Primary is always crashing during Network use. Typing fast in ssh or running "top" with 0.1 second delay (change with 'd') reliably trigger the crash for me. I use the attached scripts to run Qemu, in my case both primary and secondary run on the same Host for testing purposes. See the files in the attached .tar.bz2 for more Info, they also contain a Coredump.
Regards,
Lukas Straub
Configure CMDline:
./configure --target-list=x86_64-softmmu,i386-softmmu --enable-debug-info
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1824622/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1824622] Re: Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed."
2019-04-13 12:14 [Qemu-devel] [Bug 1824622] [NEW] Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed." Lukas Straub
@ 2019-04-13 12:45 ` Lukas Straub
2019-04-21 7:12 ` Lukas Straub
2019-05-18 9:51 ` Lukas Straub
2 siblings, 0 replies; 4+ messages in thread
From: Lukas Straub @ 2019-04-13 12:45 UTC (permalink / raw)
To: qemu-devel
https://lists.nongnu.org/archive/html/qemu-discuss/2019-04/msg00026.html
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1824622
Title:
Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion
`event_unhandled_count > 0' failed."
Status in QEMU:
New
Bug description:
Hello Everyone,
Now with Qemu 4.0.0-rc3, COLO is finally working so I gave it a try, but the Primary is always crashing during Network use. Typing fast in ssh or running "top" with 0.1 second delay (change with 'd') reliably trigger the crash for me. I use the attached scripts to run Qemu, in my case both primary and secondary run on the same Host for testing purposes. See the files in the attached .tar.bz2 for more Info, they also contain a Coredump.
Regards,
Lukas Straub
Configure CMDline:
./configure --target-list=x86_64-softmmu,i386-softmmu --enable-debug-info
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1824622/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1824622] Re: Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed."
2019-04-13 12:14 [Qemu-devel] [Bug 1824622] [NEW] Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed." Lukas Straub
2019-04-13 12:45 ` [Qemu-devel] [Bug 1824622] " Lukas Straub
@ 2019-04-21 7:12 ` Lukas Straub
2019-05-18 9:51 ` Lukas Straub
2 siblings, 0 replies; 4+ messages in thread
From: Lukas Straub @ 2019-04-21 7:12 UTC (permalink / raw)
To: qemu-devel
There is a Patch available which fixes this bug:
https://lists.nongnu.org/archive/html/qemu-devel/2019-04/msg03497.html
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1824622
Title:
Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion
`event_unhandled_count > 0' failed."
Status in QEMU:
New
Bug description:
Hello Everyone,
Now with Qemu 4.0.0-rc3, COLO is finally working so I gave it a try, but the Primary is always crashing during Network use. Typing fast in ssh or running "top" with 0.1 second delay (change with 'd') reliably trigger the crash for me. I use the attached scripts to run Qemu, in my case both primary and secondary run on the same Host for testing purposes. See the files in the attached .tar.bz2 for more Info, they also contain a Coredump.
Regards,
Lukas Straub
Configure CMDline:
./configure --target-list=x86_64-softmmu,i386-softmmu --enable-debug-info
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1824622/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1824622] Re: Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed."
2019-04-13 12:14 [Qemu-devel] [Bug 1824622] [NEW] Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed." Lukas Straub
2019-04-13 12:45 ` [Qemu-devel] [Bug 1824622] " Lukas Straub
2019-04-21 7:12 ` Lukas Straub
@ 2019-05-18 9:51 ` Lukas Straub
2 siblings, 0 replies; 4+ messages in thread
From: Lukas Straub @ 2019-05-18 9:51 UTC (permalink / raw)
To: qemu-devel
Fix applied to qemu 4.1
** Changed in: qemu
Status: New => Fix Released
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1824622
Title:
Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion
`event_unhandled_count > 0' failed."
Status in QEMU:
Fix Released
Bug description:
Hello Everyone,
Now with Qemu 4.0.0-rc3, COLO is finally working so I gave it a try, but the Primary is always crashing during Network use. Typing fast in ssh or running "top" with 0.1 second delay (change with 'd') reliably trigger the crash for me. I use the attached scripts to run Qemu, in my case both primary and secondary run on the same Host for testing purposes. See the files in the attached .tar.bz2 for more Info, they also contain a Coredump.
Regards,
Lukas Straub
Configure CMDline:
./configure --target-list=x86_64-softmmu,i386-softmmu --enable-debug-info
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1824622/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-05-18 10:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-13 12:14 [Qemu-devel] [Bug 1824622] [NEW] Qemu 4.0.0-rc3 COLO Primary Crashes with "Assertion `event_unhandled_count > 0' failed." Lukas Straub
2019-04-13 12:45 ` [Qemu-devel] [Bug 1824622] " Lukas Straub
2019-04-21 7:12 ` Lukas Straub
2019-05-18 9:51 ` Lukas Straub
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.