From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <pengms1@lenovo.com>
Authentication-Results: lists.ozlabs.org;
 spf=pass (mailfrom) smtp.mailfrom=lenovo.com
 (client-ip=67.219.246.116; helo=mail1.bemta23.messagelabs.com;
 envelope-from=pengms1@lenovo.com; receiver=<UNKNOWN>)
Authentication-Results: lists.ozlabs.org;
 dmarc=pass (p=none dis=none) header.from=lenovo.com
Received: from mail1.bemta23.messagelabs.com (mail1.bemta23.messagelabs.com
 [67.219.246.116])
 (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (No client certificate requested)
 by lists.ozlabs.org (Postfix) with ESMTPS id 44lv542BpTzDqVJ
 for <openbmc@lists.ozlabs.org>; Fri, 19 Apr 2019 21:34:15 +1000 (AEST)
Received: from [67.219.246.198] (using TLSv1.2 with cipher
 DHE-RSA-AES256-GCM-SHA384 (256 bits))
 by server-5.bemta.az-c.us-east-1.aws.symcld.net id F8/A3-24715-532B9BC5;
 Fri, 19 Apr 2019 11:34:13 +0000
X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrALMWRWlGSWpSXmKPExsWSLveKVdd0084
 Yg/7tyhYz9j5gtvh9/i+zxamWFywOzB4LNpV6XPx4jNnj/IyFjAHMUayZeUn5FQmsGZ3ntrIW
 TGtirPjV/IG9gXFFZhcjF4eQQAeTxIZdXewQznxGiYMrpwM5nBxsAmoSJ2ffY+1i5OAQEQiTe
 PUhFyTMLFAi8fH8NkYQW1ggWOLnpH5mEJtFQFXi+LanYDavgLPE/+k7WUFsCQE5iZvnOpknMH
 IuYGRYxWiWVJSZnlGSm5iZo2toYKBraGika6prZGyol1ilm6xXWqybmlhcogvklhfrFVfmJue
 k6OWllmxiBPo8pYD1+Q7GecvTDzFKcjApifLmlu+MEeJLyk+pzEgszogvKs1JLT7EKMPBoSTB
 a70RKCdYlJqeWpGWmQMMPpi0BAePkgjviw1Aad7igsTc4sx0iNQpRkUpcV5fkD4BkERGaR5cG
 yzgLzHKSgnzMjIwMAjxFKQW5WaWoMq/YhTnYFQS5v0BMp4nM68EbvoroMVMQIun6KwGWVySiJ
 CSamBcfkK1/mbIhwsz94ideXNFYtc2I5mTvcfmBdg4tmgutGkWDrk797NE/b7X158+btFWbSy
 /cj6/Kvxg4STuaQe13A2Kg1hvzT5zxfTS++srf4fk1WwzsG0NDPgX2/wv8t9uhhPsvAZG6fbT
 IqJfzNgq87RW95HWls4svUDNukNs12JzlH4z2G1RYinOSDTUYi4qTgQAS/4reHMCAAA=
X-Env-Sender: pengms1@lenovo.com
X-Msg-Ref: server-7.tower-406.messagelabs.com!1555673646!6179611!1
X-Originating-IP: [103.30.234.5]
X-SYMC-ESS-Client-Auth: outbound-route-from=pass
X-StarScan-Received: 
X-StarScan-Version: 9.31.5; banners=-,-,-
X-VirusChecked: Checked
Received: (qmail 19564 invoked from network); 19 Apr 2019 11:34:12 -0000
Received: from unknown (HELO apsmtp.lenovo.com) (103.30.234.5)
 by server-7.tower-406.messagelabs.com with DHE-RSA-AES256-GCM-SHA384 encrypted
 SMTP; 19 Apr 2019 11:34:12 -0000
Received: from smtpinternal.lenovo.com (unknown [10.96.80.15])
 (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (No client certificate requested)
 by Forcepoint Email with ESMTPS id 81BF5804AF69D745A327;
 Fri, 19 Apr 2019 19:34:05 +0800 (CST)
Received: from localhost.localdomain (unknown [10.245.100.154])
 by Forcepoint Email with ESMTP id 1E5859ACB9D3A17669D8;
 Fri, 19 Apr 2019 19:34:05 +0800 (CST)
From: Andrew Peng <pengms1@lenovo.com>
To: Joel Stanley <joel@jms.id.au>, openbmc@lists.ozlabs.org,
 benjaminfair@google.com
Cc: Andrew Peng <pengms1@lenovo.com>, liuyj19@lenovo.com, dukh@lenovo.com,
 liuyh21@lenovo.com, hsung1@lenovo.com
Subject: [PATCH linux dev-5.0] [PATCH v1] ARM: dts: aspeed: Adding Lenovo
 Hr630 BMC
Date: Fri, 19 Apr 2019 19:33:34 +0800
Message-Id: <1555673614-419143-1-git-send-email-pengms1@lenovo.com>
X-Mailer: git-send-email 2.7.4
X-BeenThere: openbmc@lists.ozlabs.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: Development list for OpenBMC <openbmc.lists.ozlabs.org>
List-Unsubscribe: <https://lists.ozlabs.org/options/openbmc>,
 <mailto:openbmc-request@lists.ozlabs.org?subject=unsubscribe>
List-Archive: <http://lists.ozlabs.org/pipermail/openbmc/>
List-Post: <mailto:openbmc@lists.ozlabs.org>
List-Help: <mailto:openbmc-request@lists.ozlabs.org?subject=help>
List-Subscribe: <https://lists.ozlabs.org/listinfo/openbmc>,
 <mailto:openbmc-request@lists.ozlabs.org?subject=subscribe>
X-List-Received-Date: Fri, 19 Apr 2019 11:34:17 -0000

Initial introduction of Lenovo Hr630 family equipped with
Aspeed 2500 BMC SoC. Hr630 is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Lenovo.
Specifically, This adds the Hr630 platform device tree file
used by the Hr630 BMC machines.

This also adds an entry of Hr630 device tree file in Makefile

Signed-off-by: Andrew Peng <pengms1@lenovo.com>
Signed-off-by: Yonghui Liu <liuyh21@lenovo.com>
Signed-off-by: Lisa Liu <liuyj19@lenovo.com>
---
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts | 884 ++++++++++++++++++++++++++
 2 files changed, 886 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148..b5d32a0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1247,4 +1247,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
-	aspeed-bmc-quanta-q71l.dtb
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-lenovo-hr630.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 0000000..ca80509
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0+
+//"Copyright ? 2019-present Lenovo
+//Licensed under GPL v2, see COPYING file for details."
+
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/*
+	 *eeprom@50 {
+	 *	compatible = "atmel,24c08";
+	 *	reg = <0x50>;
+	 *	pagesize = <16>;
+	 *};
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "MAC1_INT_N";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "MEZZ_C_PRESENT_N";
+	};
+
+	pin_gpio_a2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU1_PRST";
+	};
+
+	pin_gpio_a3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU2_PRST";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_CPU1_DISABLE_COD_N";
+	};
+
+	pin_gpio_f2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "SMB_LAN_ALERT_N_MEZZ";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin_gpio_f6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "IRQ_BMC_CPLD_NMI";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU2_ALERT_N";
+	};
+
+	pin_gpio_g0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_CPU_ERR2_LVT3_N";
+	};
+
+	pin_gpio_g1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_CPU_MSMI_CATERR_LVT3_N";
+	};
+
+	pin_gpio_g2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_PCH_BMC_THERMTRIP_N";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_I2C_BUS7_INT_N";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "NFC_FD_N";
+	};
+
+	pin_gpio_g6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "IRQ_NMI_EVENT_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU1_EPOW_N_R";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU2_EPOW_N_R";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin_gpio_h3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin_gpio_h4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU1_THROTTLE_N_R";
+	};
+
+	pin_gpio_h5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU2_THROTTLE_N_R";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU1_SMB_RESET_N";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU2_SMB_RESET_N";
+	};
+
+	pin_gpio_i1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FP_PWR_BTN_N";
+	};
+
+	pin_gpio_i2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BIOS_RCVR_N";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin_gpio_q4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "MEZZ_A_PRESENT_N";
+	};
+
+	pin_gpio_q5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "VGA_FRONT_PRES_N";
+	};
+
+	pin_gpio_q6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "I2C_RISER1_INT_N";
+	};
+
+	pin_gpio_q7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "NCSI_CABLE_DET_N";
+	};
+
+	pin_gpio_r0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FP_RST_BTN_N";
+	};
+
+	pin_gpio_r2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "HDDSIG1_DETECT_N";
+	};
+
+	pin_gpio_r3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "HDDSIG2_DETECT_N";
+	};
+
+	pin_gpio_r4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "HDDSIG3_DETECT_N";
+	};
+
+	pin_gpio_r5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "VIDEO_CABLE_DETECT_N";
+	};
+
+	pin_gpio_s0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_PS_RAPIDON_WAKE_R_N";
+	};
+
+	pin_gpio_s1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "HOST_TPM_PP_BUF";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin_gpio_s3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "IRQ_SML0_ALERT_MUX_N";
+	};
+
+	pin_gpio_s4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin_gpio_s5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_HW_STRAP_4";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin_gpio_s7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "I2C_BUS7_RESET_N";
+	};
+
+	pin_gpio_y0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin_gpio_y1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin_gpio_y2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "UID_ALERT_N";
+	};
+
+	pin_gpio_z0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_z4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_HW_STRAP_17";
+	};
+
+	pin_gpio_z6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_HW_STRAP_20";
+	};
+
+	pin_gpio_z7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin_gpio_aa1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PSU1_ALERT_N";
+	};
+
+	pin_gpio_aa2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_PVCCIN_CPU0_PWR_IN_ALERT_N";
+	};
+
+	pin_gpio_aa3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_PVCCIN_CPU1_PWR_IN_ALERT_N";
+	};
+
+	pin_gpio_aa4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "USB_CABLE_DETECT_N";
+	};
+
+	pin_gpio_aa5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+	pin_gpio_aa6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "IRQ_SMI_ACTIVE_N";
+	};
+
+	pin_gpio_aa7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_BIOS_POST_CMPLT_N";
+	};
+
+	pin_gpio_ab0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FM_TPM_MOD_PRES_N";
+	};
+
+	pin_gpio_ab1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "FORCE_NMI_SW_FPGA_N";
+	};
+
+	pin_gpio_ab2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 2) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "1U_2U_PCBA_SEL_R";
+	};
+
+	pin_gpio_ab3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "INTRUDED_PRES_N";
+	};
+};
-- 
2.7.4