[PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong]

  There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
  The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
driver to choose if need errata or not.
  The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
  Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
 Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1. add commit log for reverted patches.
  2. add comment for 'ecspi_fixed' in sdma driver.
  3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
     rather than remove.


Robin Gong (15):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove dupilicated sdma_load_context
  dma: engine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
    ecspi and sdma
  ARM: dts: imx6ul: add dma support on ecspi
  ARM: dts: imx6sll: correct ecspi/sdma compatible
  arm64: defconfig: Enable SDMA on i.mx8mq/8mm

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
 arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
 arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
 arch/arm64/configs/defconfig                       |  3 +
 drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 46 ++++++++++++---
 include/linux/platform_data/dma-imx-sdma.h         |  1 +
 12 files changed, 124 insertions(+), 45 deletions(-)

-- 
2.7.4

[PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong]

  There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
  The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
driver to choose if need errata or not.
  The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
  Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
 Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1. add commit log for reverted patches.
  2. add comment for 'ecspi_fixed' in sdma driver.
  3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
     rather than remove.


Robin Gong (15):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove dupilicated sdma_load_context
  dma: engine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
    ecspi and sdma
  ARM: dts: imx6ul: add dma support on ecspi
  ARM: dts: imx6sll: correct ecspi/sdma compatible
  arm64: defconfig: Enable SDMA on i.mx8mq/8mm

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
 arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
 arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
 arch/arm64/configs/defconfig                       |  3 +
 drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 46 ++++++++++++---
 include/linux/platform_data/dma-imx-sdma.h         |  1 +
 12 files changed, 124 insertions(+), 45 deletions(-)

-- 
2.7.4

[PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong]

  There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
  The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
driver to choose if need errata or not.
  The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
  Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
 Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1. add commit log for reverted patches.
  2. add comment for 'ecspi_fixed' in sdma driver.
  3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
     rather than remove.


Robin Gong (15):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove dupilicated sdma_load_context
  dma: engine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
    ecspi and sdma
  ARM: dts: imx6ul: add dma support on ecspi
  ARM: dts: imx6sll: correct ecspi/sdma compatible
  arm64: defconfig: Enable SDMA on i.mx8mq/8mm

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
 arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
 arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
 arch/arm64/configs/defconfig                       |  3 +
 drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 46 ++++++++++++---
 include/linux/platform_data/dma-imx-sdma.h         |  1 +
 12 files changed, 124 insertions(+), 45 deletions(-)

-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"

[Robin Gong]

There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-- 
2.7.4

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d038f41..7175898 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -172,7 +172,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};

[PATCH v2 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d038f41..7175898 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -172,7 +172,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

[PATCH v2 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d038f41..7175898 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -172,7 +172,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

[PATCH v2 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d038f41..7175898 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -172,7 +172,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"

[Robin Gong]

There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
2.7.4

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bc..a90f217 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};

[PATCH v2 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bc..a90f217 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

[PATCH v2 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bc..a90f217 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

[PATCH v2 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bc..a90f217 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,03/15] Revert "dmaengine: imx-sdma: refine to load context only once"

[Robin Gong]

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 7 -------
 1 file changed, 7 deletions(-)

-- 
2.7.4

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 99d9f43..407a56e 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -377,7 +377,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -988,9 +987,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1033,8 +1029,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1074,7 +1068,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_disable_channel_async(struct dma_chan *chan)

[PATCH v2 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"

[Robin Gong]

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 99d9f43..407a56e 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -377,7 +377,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -988,9 +987,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1033,8 +1029,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1074,7 +1068,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_disable_channel_async(struct dma_chan *chan)
-- 
2.7.4

[PATCH v2 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"

[Robin Gong]

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 99d9f43..407a56e 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -377,7 +377,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -988,9 +987,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1033,8 +1029,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1074,7 +1068,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_disable_channel_async(struct dma_chan *chan)
-- 
2.7.4

[PATCH v2 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"

[Robin Gong]

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 99d9f43..407a56e 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -377,7 +377,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -988,9 +987,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1033,8 +1029,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1074,7 +1068,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_disable_channel_async(struct dma_chan *chan)
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context

[Robin Gong]

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

-- 
2.7.4

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 407a56e..86a31b4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1134,7 +1134,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1174,9 +1173,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,

[PATCH v2 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context

[Robin Gong]

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 407a56e..86a31b4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1134,7 +1134,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1174,9 +1173,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
-- 
2.7.4

[PATCH v2 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context

[Robin Gong]

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 407a56e..86a31b4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1134,7 +1134,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1174,9 +1173,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
-- 
2.7.4

[PATCH v2 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context

[Robin Gong]

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 407a56e..86a31b4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1134,7 +1134,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1174,9 +1173,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,05/15] dmaengine: imx-sdma: add mcu_2_ecspi script

[Robin Gong]

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c                     | 3 +++
 include/linux/platform_data/dma-imx-sdma.h | 1 +
 2 files changed, 4 insertions(+)

-- 
2.7.4

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 86a31b4..352b0d5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -924,6 +924,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53c..f794fee 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,6 +51,7 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
 };
 

[PATCH v2 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script

[Robin Gong]

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c                     | 3 +++
 include/linux/platform_data/dma-imx-sdma.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 86a31b4..352b0d5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -924,6 +924,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53c..f794fee 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,6 +51,7 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
 };
 
-- 
2.7.4

[PATCH v2 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script

[Robin Gong]

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c                     | 3 +++
 include/linux/platform_data/dma-imx-sdma.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 86a31b4..352b0d5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -924,6 +924,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53c..f794fee 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,6 +51,7 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
 };
 
-- 
2.7.4

[PATCH v2 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script

[Robin Gong]

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c                     | 3 +++
 include/linux/platform_data/dma-imx-sdma.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 86a31b4..352b0d5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -924,6 +924,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53c..f794fee 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,6 +51,7 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
 };
 
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,06/15] spi: imx: fix ERR009165

[Robin Gong]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

-- 
2.7.4

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1e..eb56eac 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
+	/* ERR009165: work in XHC mode as PIO */
 	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */

[PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1e..eb56eac 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
+	/* ERR009165: work in XHC mode as PIO */
 	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.7.4

[PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1e..eb56eac 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
+	/* ERR009165: work in XHC mode as PIO */
 	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.7.4

[PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1e..eb56eac 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
+	/* ERR009165: work in XHC mode as PIO */
 	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
Remove workaround on those chips. Add new i.mx6ul type for that.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

-- 
2.7.4

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index eb56eac..2e5e978 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -57,6 +57,7 @@ enum spi_imx_devtype {
 	IMX35_CSPI,	/* CSPI on all i.mx except above */
 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
+	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
 };
 
 struct spi_imx_data;
@@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
 
 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 {
-	return d->devtype_data->devtype == IMX51_ECSPI;
+	return d->devtype_data->devtype == IMX51_ECSPI ||
+	       d->devtype_data->devtype == IMX6UL_ECSPI;
 }
 
 static inline int is_imx53_ecspi(struct spi_imx_data *d)
@@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	if (spi_imx->usedma)
-		ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma) {
+		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+			ctrl |= MX51_ECSPI_CTRL_SMC;
+		else
+			ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	}
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -615,6 +624,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
 	u32 tx_wml = 0;
 
+	if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
@@ -1012,6 +1023,22 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX6UL_ECSPI,
+};
+
 static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
@@ -1035,6 +1062,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
 		.name = "imx53-ecspi",
 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
 	}, {
+		.name = "imx6ul-ecspi",
+		.driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -1047,6 +1077,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);

[PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

   ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
Remove workaround on those chips. Add new i.mx6ul type for that.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index eb56eac..2e5e978 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -57,6 +57,7 @@ enum spi_imx_devtype {
 	IMX35_CSPI,	/* CSPI on all i.mx except above */
 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
+	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
 };
 
 struct spi_imx_data;
@@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
 
 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 {
-	return d->devtype_data->devtype == IMX51_ECSPI;
+	return d->devtype_data->devtype == IMX51_ECSPI ||
+	       d->devtype_data->devtype == IMX6UL_ECSPI;
 }
 
 static inline int is_imx53_ecspi(struct spi_imx_data *d)
@@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	if (spi_imx->usedma)
-		ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma) {
+		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+			ctrl |= MX51_ECSPI_CTRL_SMC;
+		else
+			ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	}
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -615,6 +624,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
 	u32 tx_wml = 0;
 
+	if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
@@ -1012,6 +1023,22 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX6UL_ECSPI,
+};
+
 static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
@@ -1035,6 +1062,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
 		.name = "imx53-ecspi",
 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
 	}, {
+		.name = "imx6ul-ecspi",
+		.driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -1047,6 +1077,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
-- 
2.7.4

[PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

   ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
Remove workaround on those chips. Add new i.mx6ul type for that.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index eb56eac..2e5e978 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -57,6 +57,7 @@ enum spi_imx_devtype {
 	IMX35_CSPI,	/* CSPI on all i.mx except above */
 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
+	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
 };
 
 struct spi_imx_data;
@@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
 
 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 {
-	return d->devtype_data->devtype == IMX51_ECSPI;
+	return d->devtype_data->devtype == IMX51_ECSPI ||
+	       d->devtype_data->devtype == IMX6UL_ECSPI;
 }
 
 static inline int is_imx53_ecspi(struct spi_imx_data *d)
@@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	if (spi_imx->usedma)
-		ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma) {
+		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+			ctrl |= MX51_ECSPI_CTRL_SMC;
+		else
+			ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	}
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -615,6 +624,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
 	u32 tx_wml = 0;
 
+	if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
@@ -1012,6 +1023,22 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX6UL_ECSPI,
+};
+
 static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
@@ -1035,6 +1062,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
 		.name = "imx53-ecspi",
 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
 	}, {
+		.name = "imx6ul-ecspi",
+		.driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -1047,6 +1077,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
-- 
2.7.4

[PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

   ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
Remove workaround on those chips. Add new i.mx6ul type for that.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index eb56eac..2e5e978 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -57,6 +57,7 @@ enum spi_imx_devtype {
 	IMX35_CSPI,	/* CSPI on all i.mx except above */
 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
+	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
 };
 
 struct spi_imx_data;
@@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
 
 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 {
-	return d->devtype_data->devtype == IMX51_ECSPI;
+	return d->devtype_data->devtype == IMX51_ECSPI ||
+	       d->devtype_data->devtype == IMX6UL_ECSPI;
 }
 
 static inline int is_imx53_ecspi(struct spi_imx_data *d)
@@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	if (spi_imx->usedma)
-		ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma) {
+		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+			ctrl |= MX51_ECSPI_CTRL_SMC;
+		else
+			ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	}
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -615,6 +624,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
 	u32 tx_wml = 0;
 
+	if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
@@ -1012,6 +1023,22 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX6UL_ECSPI,
+};
+
 static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
@@ -1035,6 +1062,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
 		.name = "imx53-ecspi",
 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
 	}, {
+		.name = "imx6ul-ecspi",
+		.driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -1047,6 +1077,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

ERR009165 fixed from i.mx6ul, add it to show the errata fixed.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.7.4

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d32641..32c4263d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,8 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
+    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)
   - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt

[PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

ERR009165 fixed from i.mx6ul, add it to show the errata fixed.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d32641..32c4263d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,8 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
+    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)
   - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- 
2.7.4

[PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

ERR009165 fixed from i.mx6ul, add it to show the errata fixed.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d32641..32c4263d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,8 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
+    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)
   - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- 
2.7.4

[PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

ERR009165 fixed from i.mx6ul, add it to show the errata fixed.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d32641..32c4263d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,8 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
+    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)
   - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul

[Robin Gong]

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

-- 
2.7.4

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 352b0d5..3e912b6 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it be fixed in soc from i.mx6ul.
+	 * please get more information from below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -562,6 +594,7 @@ static struct sdma_driver_data sdma_imx8mq = {
 	.num_events = 48,
 	.script_addrs = &sdma_script_imx7d,
 	.check_ratio = 1,
+	.ecspi_fixed = true,
 };
 
 static const struct platform_device_id sdma_devtypes[] = {
@@ -584,9 +617,15 @@ static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +641,9 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1207,17 @@ static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;

[PATCH v2 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul

[Robin Gong]

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 352b0d5..3e912b6 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it be fixed in soc from i.mx6ul.
+	 * please get more information from below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -562,6 +594,7 @@ static struct sdma_driver_data sdma_imx8mq = {
 	.num_events = 48,
 	.script_addrs = &sdma_script_imx7d,
 	.check_ratio = 1,
+	.ecspi_fixed = true,
 };
 
 static const struct platform_device_id sdma_devtypes[] = {
@@ -584,9 +617,15 @@ static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +641,9 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1207,17 @@ static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;
-- 
2.7.4

[PATCH v2 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul

[Robin Gong]

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 352b0d5..3e912b6 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it be fixed in soc from i.mx6ul.
+	 * please get more information from below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -562,6 +594,7 @@ static struct sdma_driver_data sdma_imx8mq = {
 	.num_events = 48,
 	.script_addrs = &sdma_script_imx7d,
 	.check_ratio = 1,
+	.ecspi_fixed = true,
 };
 
 static const struct platform_device_id sdma_devtypes[] = {
@@ -584,9 +617,15 @@ static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +641,9 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1207,17 @@ static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;
-- 
2.7.4

[PATCH v2 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul

[Robin Gong]

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 352b0d5..3e912b6 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it be fixed in soc from i.mx6ul.
+	 * please get more information from below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -562,6 +594,7 @@ static struct sdma_driver_data sdma_imx8mq = {
 	.num_events = 48,
 	.script_addrs = &sdma_script_imx7d,
 	.check_ratio = 1,
+	.ecspi_fixed = true,
 };
 
 static const struct platform_device_id sdma_devtypes[] = {
@@ -584,9 +617,15 @@ static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +641,9 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1207,17 @@ static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Robin Gong]

Add i.mx6ul and i.mx6sx compatible name.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.7.4

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 9d8bbac..d024a83 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,8 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6sx-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional

[PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Robin Gong]

Add i.mx6ul and i.mx6sx compatible name.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 9d8bbac..d024a83 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,8 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6sx-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
-- 
2.7.4

[PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Robin Gong]

Add i.mx6ul and i.mx6sx compatible name.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 9d8bbac..d024a83 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,8 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6sx-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
-- 
2.7.4

[PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Robin Gong]

Add i.mx6ul and i.mx6sx compatible name.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 9d8bbac..d024a83 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,8 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6sx-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

[Robin Gong]

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0, checking
event_id1 is enough for DEV_2_DEV case because it's so lucky that event_id1
never be 0.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

-- 
2.7.4

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3e912b6..4b2b7ca 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1371,8 +1371,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
 	if (sdmac->event_id1)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
@@ -1671,11 +1671,9 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
 	if (sdmac->event_id1) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)

[PATCH v2 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

[Robin Gong]

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0, checking
event_id1 is enough for DEV_2_DEV case because it's so lucky that event_id1
never be 0.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3e912b6..4b2b7ca 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1371,8 +1371,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
 	if (sdmac->event_id1)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
@@ -1671,11 +1671,9 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
 	if (sdmac->event_id1) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
-- 
2.7.4

[PATCH v2 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

[Robin Gong]

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0, checking
event_id1 is enough for DEV_2_DEV case because it's so lucky that event_id1
never be 0.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3e912b6..4b2b7ca 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1371,8 +1371,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
 	if (sdmac->event_id1)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
@@ -1671,11 +1671,9 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
 	if (sdmac->event_id1) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
-- 
2.7.4

[PATCH v2 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

[Robin Gong]

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0, checking
event_id1 is enough for DEV_2_DEV case because it's so lucky that event_id1
never be 0.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3e912b6..4b2b7ca 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1371,8 +1371,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
 	if (sdmac->event_id1)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
@@ -1671,11 +1671,9 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
 	if (sdmac->event_id1) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma

[Robin Gong]

Add new 'imx6ul-ecspi' compatible name for ecspi and new 'imx8mq-sdma' name
for sdma since on i.mx8mm/mq chip fix ecspi errata.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 14 +++++++-------
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |  6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)

-- 
2.7.4

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index de3498c..1945aa3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -251,7 +251,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -262,7 +262,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -393,7 +393,7 @@
 			ranges;
 
 			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30820000 0x10000>;
@@ -407,7 +407,7 @@
 			};
 
 			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30830000 0x10000>;
@@ -421,7 +421,7 @@
 			};
 
 			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30840000 0x10000>;
@@ -567,11 +567,11 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7c0b12a..f2a5d12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -607,7 +607,7 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
@@ -619,7 +619,7 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
@@ -631,7 +631,7 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,

[PATCH v2 12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma

[Robin Gong]

Add new 'imx6ul-ecspi' compatible name for ecspi and new 'imx8mq-sdma' name
for sdma since on i.mx8mm/mq chip fix ecspi errata.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 14 +++++++-------
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |  6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index de3498c..1945aa3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -251,7 +251,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -262,7 +262,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -393,7 +393,7 @@
 			ranges;
 
 			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30820000 0x10000>;
@@ -407,7 +407,7 @@
 			};
 
 			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30830000 0x10000>;
@@ -421,7 +421,7 @@
 			};
 
 			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30840000 0x10000>;
@@ -567,11 +567,11 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7c0b12a..f2a5d12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -607,7 +607,7 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
@@ -619,7 +619,7 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
@@ -631,7 +631,7 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
-- 
2.7.4

[PATCH v2 12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma

[Robin Gong]

Add new 'imx6ul-ecspi' compatible name for ecspi and new 'imx8mq-sdma' name
for sdma since on i.mx8mm/mq chip fix ecspi errata.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 14 +++++++-------
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |  6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index de3498c..1945aa3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -251,7 +251,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -262,7 +262,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -393,7 +393,7 @@
 			ranges;
 
 			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30820000 0x10000>;
@@ -407,7 +407,7 @@
 			};
 
 			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30830000 0x10000>;
@@ -421,7 +421,7 @@
 			};
 
 			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30840000 0x10000>;
@@ -567,11 +567,11 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7c0b12a..f2a5d12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -607,7 +607,7 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
@@ -619,7 +619,7 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
@@ -631,7 +631,7 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
-- 
2.7.4

[PATCH v2 12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma

[Robin Gong]

Add new 'imx6ul-ecspi' compatible name for ecspi and new 'imx8mq-sdma' name
for sdma since on i.mx8mm/mq chip fix ecspi errata.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 14 +++++++-------
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |  6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index de3498c..1945aa3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -251,7 +251,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -262,7 +262,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -393,7 +393,7 @@
 			ranges;
 
 			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30820000 0x10000>;
@@ -407,7 +407,7 @@
 			};
 
 			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30830000 0x10000>;
@@ -421,7 +421,7 @@
 			};
 
 			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx6ul-ecspi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30840000 0x10000>;
@@ -567,11 +567,11 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7c0b12a..f2a5d12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -607,7 +607,7 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
@@ -619,7 +619,7 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
@@ -631,7 +631,7 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,13/15] ARM: dts: imx6ul: add dma support on ecspi

[Robin Gong]

Add dma support on ecspi.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

-- 
2.7.4

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bbf010c..880b9ee 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -226,6 +226,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -238,6 +240,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -250,6 +254,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -262,6 +268,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 

[PATCH v2 13/15] ARM: dts: imx6ul: add dma support on ecspi

[Robin Gong]

Add dma support on ecspi.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bbf010c..880b9ee 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -226,6 +226,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -238,6 +240,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -250,6 +254,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -262,6 +268,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-- 
2.7.4

[PATCH v2 13/15] ARM: dts: imx6ul: add dma support on ecspi

[Robin Gong]

Add dma support on ecspi.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bbf010c..880b9ee 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -226,6 +226,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -238,6 +240,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -250,6 +254,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -262,6 +268,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-- 
2.7.4

[PATCH v2 13/15] ARM: dts: imx6ul: add dma support on ecspi

[Robin Gong]

Add dma support on ecspi.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bbf010c..880b9ee 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -226,6 +226,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -238,6 +240,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -250,6 +254,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -262,6 +268,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible

[Robin Gong]

Correct ecspi/sdma compatible since ecspi errata ERR009165 which
is not fixed on i.mx6sll chip.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6sll.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

-- 
2.7.4

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..ac06471 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -183,7 +183,7 @@
 				};
 
 				ecspi1: spi@2008000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
@@ -195,7 +195,7 @@
 				};
 
 				ecspi2: spi@200c000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
@@ -207,7 +207,7 @@
 				};
 
 				ecspi3: spi@2010000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
@@ -219,7 +219,7 @@
 				};
 
 				ecspi4: spi@2014000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
@@ -619,7 +619,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,

[PATCH v2 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible

[Robin Gong]

Correct ecspi/sdma compatible since ecspi errata ERR009165 which
is not fixed on i.mx6sll chip.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6sll.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..ac06471 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -183,7 +183,7 @@
 				};
 
 				ecspi1: spi@2008000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
@@ -195,7 +195,7 @@
 				};
 
 				ecspi2: spi@200c000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
@@ -207,7 +207,7 @@
 				};
 
 				ecspi3: spi@2010000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
@@ -219,7 +219,7 @@
 				};
 
 				ecspi4: spi@2014000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
@@ -619,7 +619,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,
-- 
2.7.4

[PATCH v2 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible

[Robin Gong]

Correct ecspi/sdma compatible since ecspi errata ERR009165 which
is not fixed on i.mx6sll chip.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6sll.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..ac06471 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -183,7 +183,7 @@
 				};
 
 				ecspi1: spi@2008000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
@@ -195,7 +195,7 @@
 				};
 
 				ecspi2: spi@200c000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
@@ -207,7 +207,7 @@
 				};
 
 				ecspi3: spi@2010000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
@@ -219,7 +219,7 @@
 				};
 
 				ecspi4: spi@2014000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
@@ -619,7 +619,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,
-- 
2.7.4

[PATCH v2 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible

[Robin Gong]

Correct ecspi/sdma compatible since ecspi errata ERR009165 which
is not fixed on i.mx6sll chip.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6sll.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..ac06471 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -183,7 +183,7 @@
 				};
 
 				ecspi1: spi@2008000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
@@ -195,7 +195,7 @@
 				};
 
 				ecspi2: spi@200c000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
@@ -207,7 +207,7 @@
 				};
 
 				ecspi3: spi@2010000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
@@ -219,7 +219,7 @@
 				};
 
 				ecspi4: spi@2014000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx6sll-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
@@ -619,7 +619,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm

[Robin Gong]

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

-- 
2.7.4

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 17daa97..7081817 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -203,6 +203,8 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_HISILICON_LPC=y
@@ -635,6 +637,7 @@ CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=m
+CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y

[PATCH v2 15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm

[Robin Gong]

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 17daa97..7081817 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -203,6 +203,8 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_HISILICON_LPC=y
@@ -635,6 +637,7 @@ CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=m
+CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
-- 
2.7.4

[PATCH v2 15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm

[Robin Gong]

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 17daa97..7081817 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -203,6 +203,8 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_HISILICON_LPC=y
@@ -635,6 +637,7 @@ CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=m
+CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
-- 
2.7.4

[PATCH v2 15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm

[Robin Gong]

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 17daa97..7081817 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -203,6 +203,8 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_HISILICON_LPC=y
@@ -635,6 +637,7 @@ CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=m
+CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
-- 
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Hi Robin,

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.

I would like to have a more in-depth explanation about how this new RAM
script differs from the existing ROM script and the changes to the
state transitions.

>   The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
> NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
> i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
> driver to choose if need errata or not.
>   The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
>   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
> 
> PS:
>  Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

This is not an option as long as the SDMA RAM firmware breaks the
mainline serial DMA support. Please provide a fixed SDMA RAM firmware
that doesn't replace the ROM serial script, as that one is totally
fine.

Regards,
Lucas

> v2:
>   1. add commit log for reverted patches.
>   2. add comment for 'ecspi_fixed' in sdma driver.
>   3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>      rather than remove.
> 
> 
> Robin Gong (15):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dma: engine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   dt-bindings: spi: imx: add i.mx6ul to state errata fixed
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
>     ecspi and sdma
>   ARM: dts: imx6ul: add dma support on ecspi
>   ARM: dts: imx6sll: correct ecspi/sdma compatible
>   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
>  arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
>  arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
>  arch/arm64/configs/defconfig                       |  3 +
>  drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 46 ++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         |  1 +
>  12 files changed, 124 insertions(+), 45 deletions(-)
> 
> -- 
> 2.7.4
> 

Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Hi Robin,

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.

I would like to have a more in-depth explanation about how this new RAM
script differs from the existing ROM script and the changes to the
state transitions.

>   The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
> NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
> i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
> driver to choose if need errata or not.
>   The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
>   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
> 
> PS:
>  Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

This is not an option as long as the SDMA RAM firmware breaks the
mainline serial DMA support. Please provide a fixed SDMA RAM firmware
that doesn't replace the ROM serial script, as that one is totally
fine.

Regards,
Lucas

> v2:
>   1. add commit log for reverted patches.
>   2. add comment for 'ecspi_fixed' in sdma driver.
>   3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>      rather than remove.
> 
> 
> Robin Gong (15):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dma: engine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   dt-bindings: spi: imx: add i.mx6ul to state errata fixed
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
>     ecspi and sdma
>   ARM: dts: imx6ul: add dma support on ecspi
>   ARM: dts: imx6sll: correct ecspi/sdma compatible
>   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
>  arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
>  arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
>  arch/arm64/configs/defconfig                       |  3 +
>  drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 46 ++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         |  1 +
>  12 files changed, 124 insertions(+), 45 deletions(-)
> 
> -- 
> 2.7.4
> 

Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Hi Robin,

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.

I would like to have a more in-depth explanation about how this new RAM
script differs from the existing ROM script and the changes to the
state transitions.

>   The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul,
> NXP fix this design issue from i.mx6ul, so newer chips such as i.mx6ull/
> i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma
> driver to choose if need errata or not.
>   The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
>   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
> 
> PS:
>  Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

This is not an option as long as the SDMA RAM firmware breaks the
mainline serial DMA support. Please provide a fixed SDMA RAM firmware
that doesn't replace the ROM serial script, as that one is totally
fine.

Regards,
Lucas

> v2:
>   1. add commit log for reverted patches.
>   2. add comment for 'ecspi_fixed' in sdma driver.
>   3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>      rather than remove.
> 
> 
> Robin Gong (15):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dma: engine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   dt-bindings: spi: imx: add i.mx6ul to state errata fixed
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   ARM64: dts: freescale: imx8mm/8mq: update new compatible name for
>     ecspi and sdma
>   ARM: dts: imx6ul: add dma support on ecspi
>   ARM: dts: imx6sll: correct ecspi/sdma compatible
>   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  2 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
>  arch/arm/boot/dts/imx6sll.dtsi                     | 10 ++--
>  arch/arm/boot/dts/imx6ul.dtsi                      |  8 +++
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 14 ++---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  6 +-
>  arch/arm64/configs/defconfig                       |  3 +
>  drivers/dma/imx-sdma.c                             | 67 ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 46 ++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         |  1 +
>  12 files changed, 124 insertions(+), 45 deletions(-)
> 
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong]

On 2019-04-26 at 08:19 +0000, Lucas Stach wrote:
> Caution: EXT Email
> 
> Hi Robin,
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > 
> >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > transfer to be send twice in DMA mode. Please get more information
> > from:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=02%7C01%7Cy
> > ibin.gong%40nxp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc
> > 2b4c6fa92cd99c5c301635%7C0%7C1%7C636918635828489049&sdata=IcPzg
> > uHTS81rdHGMzU2wQdDYJn9bE1UDCsc0BUO5In8%3D&reserved=0. The
> > workaround is adding
> > new sdma ram script which works in XCH  mode as PIO inside sdma
> > instead
> > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
> I would like to have a more in-depth explanation about how this new
> RAM
> script differs from the existing ROM script and the changes to the
> state transitions.
The new ecspi ram script just follow errata to enable ecspi XCH bit
after every time txfifo filled just as PIO, please check spi_imx_push()
in spi-imx.c.
> 
> > 
> >   The issue should be exist on all legacy i.mx6/7 soc family before
> > i.mx6ul,
> > NXP fix this design issue from i.mx6ul, so newer chips such as
> > i.mx6ull/
> > i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> > add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in
> > sdma
> > driver to choose if need errata or not.
> >   The first two reverted patches should be the same issue, though,
> > it
> > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > could
> > have the chance to test this patch set if could fix their issues.
> >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > work
> > on i.mx8mm because the event id is zero.
> > 
> > PS:
> >  Please get sdma firmware from below linux-firmware and copy it to
> > your
> > local rootfs /lib/firmware/imx/sdma.
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > -firmware.git%2Ftree%2Fimx%2Fsdma&data=02%7C01%7Cyibin.gong%40n
> > xp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc2b4c6fa92cd99
> > c5c301635%7C0%7C1%7C636918635828489049&sdata=SMoonJ9HQpUj3TzPmi
> > 7CcCSAwaR44%2BGPi%2BSBj%2FXceqo%3D&reserved=0
> This is not an option as long as the SDMA RAM firmware breaks the
> mainline serial DMA support. Please provide a fixed SDMA RAM firmware
> that doesn't replace the ROM serial script, as that one is totally
> fine.
Yes, I have another patch to fix such uart function broken with SDMA
RAM firmware, including new sdma firmware updated and kernel patch.
Should I add that patch into this patch set?

Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong]

On 2019-04-26 at 08:19 +0000, Lucas Stach wrote:
> Caution: EXT Email
> 
> Hi Robin,
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > 
> >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > transfer to be send twice in DMA mode. Please get more information
> > from:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=02%7C01%7Cy
> > ibin.gong%40nxp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc
> > 2b4c6fa92cd99c5c301635%7C0%7C1%7C636918635828489049&sdata=IcPzg
> > uHTS81rdHGMzU2wQdDYJn9bE1UDCsc0BUO5In8%3D&reserved=0. The
> > workaround is adding
> > new sdma ram script which works in XCH  mode as PIO inside sdma
> > instead
> > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
> I would like to have a more in-depth explanation about how this new
> RAM
> script differs from the existing ROM script and the changes to the
> state transitions.
The new ecspi ram script just follow errata to enable ecspi XCH bit
after every time txfifo filled just as PIO, please check spi_imx_push()
in spi-imx.c.
> 
> > 
> >   The issue should be exist on all legacy i.mx6/7 soc family before
> > i.mx6ul,
> > NXP fix this design issue from i.mx6ul, so newer chips such as
> > i.mx6ull/
> > i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> > add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in
> > sdma
> > driver to choose if need errata or not.
> >   The first two reverted patches should be the same issue, though,
> > it
> > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > could
> > have the chance to test this patch set if could fix their issues.
> >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > work
> > on i.mx8mm because the event id is zero.
> > 
> > PS:
> >  Please get sdma firmware from below linux-firmware and copy it to
> > your
> > local rootfs /lib/firmware/imx/sdma.
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > -firmware.git%2Ftree%2Fimx%2Fsdma&data=02%7C01%7Cyibin.gong%40n
> > xp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc2b4c6fa92cd99
> > c5c301635%7C0%7C1%7C636918635828489049&sdata=SMoonJ9HQpUj3TzPmi
> > 7CcCSAwaR44%2BGPi%2BSBj%2FXceqo%3D&reserved=0
> This is not an option as long as the SDMA RAM firmware breaks the
> mainline serial DMA support. Please provide a fixed SDMA RAM firmware
> that doesn't replace the ROM serial script, as that one is totally
> fine.
Yes, I have another patch to fix such uart function broken with SDMA
RAM firmware, including new sdma firmware updated and kernel patch.
Should I add that patch into this patch set?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:47 +0000 schrieb Robin Gong:
> On 2019-04-26 at 08:19 +0000, Lucas Stach wrote:
> > Caution: EXT Email
> > 
> > Hi Robin,
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > 
> > >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > > transfer to be send twice in DMA mode. Please get more information
> > > from:
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > > ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=02%7C01%7Cy
> > > ibin.gong%40nxp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc
> > > 2b4c6fa92cd99c5c301635%7C0%7C1%7C636918635828489049&sdata=IcPzg
> > > uHTS81rdHGMzU2wQdDYJn9bE1UDCsc0BUO5In8%3D&reserved=0. The
> > > workaround is adding
> > > new sdma ram script which works in XCH  mode as PIO inside sdma
> > > instead
> > > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
> > 
> > I would like to have a more in-depth explanation about how this new
> > RAM
> > script differs from the existing ROM script and the changes to the
> > state transitions.
> 
> The new ecspi ram script just follow errata to enable ecspi XCH bit
> after every time txfifo filled just as PIO, please check spi_imx_push()
> in spi-imx.c.
> > 
> > > 
> > >   The issue should be exist on all legacy i.mx6/7 soc family before
> > > i.mx6ul,
> > > NXP fix this design issue from i.mx6ul, so newer chips such as
> > > i.mx6ull/
> > > i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> > > add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in
> > > sdma
> > > driver to choose if need errata or not.
> > >   The first two reverted patches should be the same issue, though,
> > > it
> > > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > > could
> > > have the chance to test this patch set if could fix their issues.
> > >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > > work
> > > on i.mx8mm because the event id is zero.
> > > 
> > > PS:
> > >  Please get sdma firmware from below linux-firmware and copy it to
> > > your
> > > local rootfs /lib/firmware/imx/sdma.
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > > -firmware.git%2Ftree%2Fimx%2Fsdma&data=02%7C01%7Cyibin.gong%40n
> > > xp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc2b4c6fa92cd99
> > > c5c301635%7C0%7C1%7C636918635828489049&sdata=SMoonJ9HQpUj3TzPmi
> > > 7CcCSAwaR44%2BGPi%2BSBj%2FXceqo%3D&reserved=0
> > 
> > This is not an option as long as the SDMA RAM firmware breaks the
> > mainline serial DMA support. Please provide a fixed SDMA RAM firmware
> > that doesn't replace the ROM serial script, as that one is totally
> > fine.
> 
> Yes, I have another patch to fix such uart function broken with SDMA
> RAM firmware, including new sdma firmware updated and kernel patch.
> Should I add that patch into this patch set?

Why would we need a kernel patch for this? Just drop the SDMA serial
RAM script, it does not add any value as the ROM script is totally
fine.

Regards,
Lucas

Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:47 +0000 schrieb Robin Gong:
> On 2019-04-26 at 08:19 +0000, Lucas Stach wrote:
> > Caution: EXT Email
> > 
> > Hi Robin,
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > 
> > >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > > transfer to be send twice in DMA mode. Please get more information
> > > from:
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > > ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=02%7C01%7Cy
> > > ibin.gong%40nxp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc
> > > 2b4c6fa92cd99c5c301635%7C0%7C1%7C636918635828489049&sdata=IcPzg
> > > uHTS81rdHGMzU2wQdDYJn9bE1UDCsc0BUO5In8%3D&reserved=0. The
> > > workaround is adding
> > > new sdma ram script which works in XCH  mode as PIO inside sdma
> > > instead
> > > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
> > 
> > I would like to have a more in-depth explanation about how this new
> > RAM
> > script differs from the existing ROM script and the changes to the
> > state transitions.
> 
> The new ecspi ram script just follow errata to enable ecspi XCH bit
> after every time txfifo filled just as PIO, please check spi_imx_push()
> in spi-imx.c.
> > 
> > > 
> > >   The issue should be exist on all legacy i.mx6/7 soc family before
> > > i.mx6ul,
> > > NXP fix this design issue from i.mx6ul, so newer chips such as
> > > i.mx6ull/
> > > i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> > > add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in
> > > sdma
> > > driver to choose if need errata or not.
> > >   The first two reverted patches should be the same issue, though,
> > > it
> > > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > > could
> > > have the chance to test this patch set if could fix their issues.
> > >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > > work
> > > on i.mx8mm because the event id is zero.
> > > 
> > > PS:
> > >  Please get sdma firmware from below linux-firmware and copy it to
> > > your
> > > local rootfs /lib/firmware/imx/sdma.
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > > -firmware.git%2Ftree%2Fimx%2Fsdma&data=02%7C01%7Cyibin.gong%40n
> > > xp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc2b4c6fa92cd99
> > > c5c301635%7C0%7C1%7C636918635828489049&sdata=SMoonJ9HQpUj3TzPmi
> > > 7CcCSAwaR44%2BGPi%2BSBj%2FXceqo%3D&reserved=0
> > 
> > This is not an option as long as the SDMA RAM firmware breaks the
> > mainline serial DMA support. Please provide a fixed SDMA RAM firmware
> > that doesn't replace the ROM serial script, as that one is totally
> > fine.
> 
> Yes, I have another patch to fix such uart function broken with SDMA
> RAM firmware, including new sdma firmware updated and kernel patch.
> Should I add that patch into this patch set?

Why would we need a kernel patch for this? Just drop the SDMA serial
RAM script, it does not add any value as the ROM script is totally
fine.

Regards,
Lucas

Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:47 +0000 schrieb Robin Gong:
> On 2019-04-26 at 08:19 +0000, Lucas Stach wrote:
> > Caution: EXT Email
> > 
> > Hi Robin,
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > 
> > >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > > transfer to be send twice in DMA mode. Please get more information
> > > from:
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > > ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&data=02%7C01%7Cy
> > > ibin.gong%40nxp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc
> > > 2b4c6fa92cd99c5c301635%7C0%7C1%7C636918635828489049&sdata=IcPzg
> > > uHTS81rdHGMzU2wQdDYJn9bE1UDCsc0BUO5In8%3D&reserved=0. The
> > > workaround is adding
> > > new sdma ram script which works in XCH  mode as PIO inside sdma
> > > instead
> > > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0.
> > 
> > I would like to have a more in-depth explanation about how this new
> > RAM
> > script differs from the existing ROM script and the changes to the
> > state transitions.
> 
> The new ecspi ram script just follow errata to enable ecspi XCH bit
> after every time txfifo filled just as PIO, please check spi_imx_push()
> in spi-imx.c.
> > 
> > > 
> > >   The issue should be exist on all legacy i.mx6/7 soc family before
> > > i.mx6ul,
> > > NXP fix this design issue from i.mx6ul, so newer chips such as
> > > i.mx6ull/
> > > i.mx8mq/i.mx8mm, don't need this workaroud anymore. This patch set
> > > add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in
> > > sdma
> > > driver to choose if need errata or not.
> > >   The first two reverted patches should be the same issue, though,
> > > it
> > > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > > could
> > > have the chance to test this patch set if could fix their issues.
> > >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > > work
> > > on i.mx8mm because the event id is zero.
> > > 
> > > PS:
> > >  Please get sdma firmware from below linux-firmware and copy it to
> > > your
> > > local rootfs /lib/firmware/imx/sdma.
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > > -firmware.git%2Ftree%2Fimx%2Fsdma&data=02%7C01%7Cyibin.gong%40n
> > > xp.com%7C0078694b231443d1cb7d08d6ca1feecf%7C686ea1d3bc2b4c6fa92cd99
> > > c5c301635%7C0%7C1%7C636918635828489049&sdata=SMoonJ9HQpUj3TzPmi
> > > 7CcCSAwaR44%2BGPi%2BSBj%2FXceqo%3D&reserved=0
> > 
> > This is not an option as long as the SDMA RAM firmware breaks the
> > mainline serial DMA support. Please provide a fixed SDMA RAM firmware
> > that doesn't replace the ROM serial script, as that one is totally
> > fine.
> 
> Yes, I have another patch to fix such uart function broken with SDMA
> RAM firmware, including new sdma firmware updated and kernel patch.
> Should I add that patch into this patch set?

Why would we need a kernel patch for this? Just drop the SDMA serial
RAM script, it does not add any value as the ROM script is totally
fine.

Regards,
Lucas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> Change to XCH  mode even in dma mode, please refer to the below
> errata:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 09c9a1e..eb56eac 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> +	/* ERR009165: work in XHC mode as PIO */
>  	if (spi_imx->usedma)
> -		ctrl |= MX51_ECSPI_CTRL_SMC;
> +		ctrl &= ~MX51_ECSPI_CTRL_SMC;
>  
>  	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>  
> @@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  
>  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
>  {
> +	u32 tx_wml = 0;
> +

With a wml of 0 you might set the maxburst of the TX dma channel to
fifosize to minimize the performance impact of this workaround.

Regards,
Lucas

>  	/*
>  	 * Configure the DMA register: setup the watermark
>  	 * and enable DMA request.
>  	 */
>  	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
> -		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
> +		MX51_ECSPI_DMA_TX_WML(tx_wml) |
>  		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
>  		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
>  		MX51_ECSPI_DMA_RXTDEN, spi_imx->base +
> MX51_ECSPI_DMA);
> @@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device
> *dev, struct spi_imx_data *spi_imx,
>  {
>  	int ret;
>  
> -	/* use pio mode for i.mx6dl chip TKT238285 */
> -	if (of_machine_is_compatible("fsl,imx6dl"))
> -		return 0;
> -
>  	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
>  
>  	/* Prepare for TX DMA: */
> -- 
> 2.7.4
>

Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> Change to XCH  mode even in dma mode, please refer to the below
> errata:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 09c9a1e..eb56eac 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> +	/* ERR009165: work in XHC mode as PIO */
>  	if (spi_imx->usedma)
> -		ctrl |= MX51_ECSPI_CTRL_SMC;
> +		ctrl &= ~MX51_ECSPI_CTRL_SMC;
>  
>  	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>  
> @@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  
>  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
>  {
> +	u32 tx_wml = 0;
> +

With a wml of 0 you might set the maxburst of the TX dma channel to
fifosize to minimize the performance impact of this workaround.

Regards,
Lucas

>  	/*
>  	 * Configure the DMA register: setup the watermark
>  	 * and enable DMA request.
>  	 */
>  	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
> -		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
> +		MX51_ECSPI_DMA_TX_WML(tx_wml) |
>  		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
>  		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
>  		MX51_ECSPI_DMA_RXTDEN, spi_imx->base +
> MX51_ECSPI_DMA);
> @@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device
> *dev, struct spi_imx_data *spi_imx,
>  {
>  	int ret;
>  
> -	/* use pio mode for i.mx6dl chip TKT238285 */
> -	if (of_machine_is_compatible("fsl,imx6dl"))
> -		return 0;
> -
>  	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
>  
>  	/* Prepare for TX DMA: */
> -- 
> 2.7.4
> 

Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> Change to XCH  mode even in dma mode, please refer to the below
> errata:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 09c9a1e..eb56eac 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> +	/* ERR009165: work in XHC mode as PIO */
>  	if (spi_imx->usedma)
> -		ctrl |= MX51_ECSPI_CTRL_SMC;
> +		ctrl &= ~MX51_ECSPI_CTRL_SMC;
>  
>  	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>  
> @@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  
>  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
>  {
> +	u32 tx_wml = 0;
> +

With a wml of 0 you might set the maxburst of the TX dma channel to
fifosize to minimize the performance impact of this workaround.

Regards,
Lucas

>  	/*
>  	 * Configure the DMA register: setup the watermark
>  	 * and enable DMA request.
>  	 */
>  	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
> -		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
> +		MX51_ECSPI_DMA_TX_WML(tx_wml) |
>  		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
>  		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
>  		MX51_ECSPI_DMA_RXTDEN, spi_imx->base +
> MX51_ECSPI_DMA);
> @@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device
> *dev, struct spi_imx_data *spi_imx,
>  {
>  	int ret;
>  
> -	/* use pio mode for i.mx6dl chip TKT238285 */
> -	if (of_machine_is_compatible("fsl,imx6dl"))
> -		return 0;
> -
>  	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
>  
>  	/* Prepare for TX DMA: */
> -- 
> 2.7.4
> 

Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> Change to XCH  mode even in dma mode, please refer to the below
> errata:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 09c9a1e..eb56eac 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> +	/* ERR009165: work in XHC mode as PIO */
>  	if (spi_imx->usedma)
> -		ctrl |= MX51_ECSPI_CTRL_SMC;
> +		ctrl &= ~MX51_ECSPI_CTRL_SMC;
>  
>  	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>  
> @@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
>  
>  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
>  {
> +	u32 tx_wml = 0;
> +

With a wml of 0 you might set the maxburst of the TX dma channel to
fifosize to minimize the performance impact of this workaround.

Regards,
Lucas

>  	/*
>  	 * Configure the DMA register: setup the watermark
>  	 * and enable DMA request.
>  	 */
>  	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
> -		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
> +		MX51_ECSPI_DMA_TX_WML(tx_wml) |
>  		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
>  		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
>  		MX51_ECSPI_DMA_RXTDEN, spi_imx->base +
> MX51_ECSPI_DMA);
> @@ -1265,10 +1268,6 @@ static int spi_imx_sdma_init(struct device
> *dev, struct spi_imx_data *spi_imx,
>  {
>  	int ret;
>  
> -	/* use pio mode for i.mx6dl chip TKT238285 */
> -	if (of_machine_is_compatible("fsl,imx6dl"))
> -		return 0;
> -
>  	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
>  
>  	/* Prepare for TX DMA: */
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>    ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
> Remove workaround on those chips. Add new i.mx6ul type for that.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index eb56eac..2e5e978 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -57,6 +57,7 @@ enum spi_imx_devtype {
>  	IMX35_CSPI,	/* CSPI on all i.mx except above */
>  	IMX51_ECSPI,	/* ECSPI on i.mx51 */
>  	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
> +	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
>  };
>  
>  struct spi_imx_data;
> @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
>  
>  static inline int is_imx51_ecspi(struct spi_imx_data *d)
>  {
> -	return d->devtype_data->devtype == IMX51_ECSPI;
> +	return d->devtype_data->devtype == IMX51_ECSPI ||
> +	       d->devtype_data->devtype == IMX6UL_ECSPI;
>  }
>  
>  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> -	/* ERR009165: work in XHC mode as PIO */
> -	if (spi_imx->usedma)
> -		ctrl &= ~MX51_ECSPI_CTRL_SMC;
> +	/*
> +	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
> +	 * before i.mx6ul.
> +	 */
> +	if (spi_imx->usedma) {
> +		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)

>=, otherwise the workaround might be applied to later generations of
the core if more are added later.

Regards,
Lucas

Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>    ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
> Remove workaround on those chips. Add new i.mx6ul type for that.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index eb56eac..2e5e978 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -57,6 +57,7 @@ enum spi_imx_devtype {
>  	IMX35_CSPI,	/* CSPI on all i.mx except above */
>  	IMX51_ECSPI,	/* ECSPI on i.mx51 */
>  	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
> +	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
>  };
>  
>  struct spi_imx_data;
> @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
>  
>  static inline int is_imx51_ecspi(struct spi_imx_data *d)
>  {
> -	return d->devtype_data->devtype == IMX51_ECSPI;
> +	return d->devtype_data->devtype == IMX51_ECSPI ||
> +	       d->devtype_data->devtype == IMX6UL_ECSPI;
>  }
>  
>  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> -	/* ERR009165: work in XHC mode as PIO */
> -	if (spi_imx->usedma)
> -		ctrl &= ~MX51_ECSPI_CTRL_SMC;
> +	/*
> +	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
> +	 * before i.mx6ul.
> +	 */
> +	if (spi_imx->usedma) {
> +		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)

>=, otherwise the workaround might be applied to later generations of
the core if more are added later.

Regards,
Lucas

Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>    ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
> Remove workaround on those chips. Add new i.mx6ul type for that.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index eb56eac..2e5e978 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -57,6 +57,7 @@ enum spi_imx_devtype {
>  	IMX35_CSPI,	/* CSPI on all i.mx except above */
>  	IMX51_ECSPI,	/* ECSPI on i.mx51 */
>  	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
> +	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
>  };
>  
>  struct spi_imx_data;
> @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
>  
>  static inline int is_imx51_ecspi(struct spi_imx_data *d)
>  {
> -	return d->devtype_data->devtype == IMX51_ECSPI;
> +	return d->devtype_data->devtype == IMX51_ECSPI ||
> +	       d->devtype_data->devtype == IMX6UL_ECSPI;
>  }
>  
>  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> -	/* ERR009165: work in XHC mode as PIO */
> -	if (spi_imx->usedma)
> -		ctrl &= ~MX51_ECSPI_CTRL_SMC;
> +	/*
> +	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
> +	 * before i.mx6ul.
> +	 */
> +	if (spi_imx->usedma) {
> +		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)

>=, otherwise the workaround might be applied to later generations of
the core if more are added later.

Regards,
Lucas

Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Lucas Stach]

Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
>    ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm.
> Remove workaround on those chips. Add new i.mx6ul type for that.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index eb56eac..2e5e978 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -57,6 +57,7 @@ enum spi_imx_devtype {
>  	IMX35_CSPI,	/* CSPI on all i.mx except above */
>  	IMX51_ECSPI,	/* ECSPI on i.mx51 */
>  	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
> +	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
>  };
>  
>  struct spi_imx_data;
> @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
>  
>  static inline int is_imx51_ecspi(struct spi_imx_data *d)
>  {
> -	return d->devtype_data->devtype == IMX51_ECSPI;
> +	return d->devtype_data->devtype == IMX51_ECSPI ||
> +	       d->devtype_data->devtype == IMX6UL_ECSPI;
>  }
>  
>  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
>  	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
>  	spi_imx->spi_bus_clk = clk;
>  
> -	/* ERR009165: work in XHC mode as PIO */
> -	if (spi_imx->usedma)
> -		ctrl &= ~MX51_ECSPI_CTRL_SMC;
> +	/*
> +	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
> +	 * before i.mx6ul.
> +	 */
> +	if (spi_imx->usedma) {
> +		if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)

>=, otherwise the workaround might be applied to later generations of
the core if more are added later.

Regards,
Lucas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> >  {
> > +     u32 tx_wml = 0;
> > +
> With a wml of 0 you might set the maxburst of the TX dma channel to
> fifosize to minimize the performance impact of this workaround.
> 
> Regards,
> Lucas
Unfortunately, this is a MUST part of errata which cause performance
drop.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> >  {
> > +     u32 tx_wml = 0;
> > +
> With a wml of 0 you might set the maxburst of the TX dma channel to
> fifosize to minimize the performance impact of this workaround.
> 
> Regards,
> Lucas
Unfortunately, this is a MUST part of errata which cause performance
drop.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> >  {
> > +     u32 tx_wml = 0;
> > +
> With a wml of 0 you might set the maxburst of the TX dma channel to
> fifosize to minimize the performance impact of this workaround.
> 
> Regards,
> Lucas
Unfortunately, this is a MUST part of errata which cause performance
drop.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> 
> Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> >  {
> > +     u32 tx_wml = 0;
> > +
> With a wml of 0 you might set the maxburst of the TX dma channel to
> fifosize to minimize the performance impact of this workaround.
> 
> Regards,
> Lucas
Unfortunately, this is a MUST part of errata which cause performance
drop.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

On 2019-04-26 at 11:09 +0200, Lucas Stach wrote:
> 
> >  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> > @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct
> > spi_imx_data *spi_imx,
> >       ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
> >       spi_imx->spi_bus_clk = clk;
> > 
> > -     /* ERR009165: work in XHC mode as PIO */
> > -     if (spi_imx->usedma)
> > -             ctrl &= ~MX51_ECSPI_CTRL_SMC;
> > +     /*
> > +      * ERR009165: work in XHC mode instead of SMC as PIO on the
> > chips
> > +      * before i.mx6ul.
> > +      */
> > +     if (spi_imx->usedma) {
> > +             if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
> > 
> > =, otherwise the workaround might be applied to later generations
> > of
> the core if more are added later.
> 
> Regards,
> Lucas
Understood your point, but for now choose different compatible name
could apply this workaround or not. I prefer to leave it for next ecspi
IP upgrade if it really come in the future, otherwise that '>=' bring
a little bit confuse if there is no update for ecspi IP...

Re: [EXT] Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

On 2019-04-26 at 11:09 +0200, Lucas Stach wrote:
> 
> >  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> > @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct
> > spi_imx_data *spi_imx,
> >       ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
> >       spi_imx->spi_bus_clk = clk;
> > 
> > -     /* ERR009165: work in XHC mode as PIO */
> > -     if (spi_imx->usedma)
> > -             ctrl &= ~MX51_ECSPI_CTRL_SMC;
> > +     /*
> > +      * ERR009165: work in XHC mode instead of SMC as PIO on the
> > chips
> > +      * before i.mx6ul.
> > +      */
> > +     if (spi_imx->usedma) {
> > +             if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
> > 
> > =, otherwise the workaround might be applied to later generations
> > of
> the core if more are added later.
> 
> Regards,
> Lucas
Understood your point, but for now choose different compatible name
could apply this workaround or not. I prefer to leave it for next ecspi
IP upgrade if it really come in the future, otherwise that '>=' bring
a little bit confuse if there is no update for ecspi IP...

Re: [EXT] Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul

[Robin Gong]

On 2019-04-26 at 11:09 +0200, Lucas Stach wrote:
> 
> >  static inline int is_imx53_ecspi(struct spi_imx_data *d)
> > @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct
> > spi_imx_data *spi_imx,
> >       ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
> >       spi_imx->spi_bus_clk = clk;
> > 
> > -     /* ERR009165: work in XHC mode as PIO */
> > -     if (spi_imx->usedma)
> > -             ctrl &= ~MX51_ECSPI_CTRL_SMC;
> > +     /*
> > +      * ERR009165: work in XHC mode instead of SMC as PIO on the
> > chips
> > +      * before i.mx6ul.
> > +      */
> > +     if (spi_imx->usedma) {
> > +             if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI)
> > 
> > =, otherwise the workaround might be applied to later generations
> > of
> the core if more are added later.
> 
> Regards,
> Lucas
Understood your point, but for now choose different compatible name
could apply this workaround or not. I prefer to leave it for next ecspi
IP upgrade if it really come in the future, otherwise that '>=' bring
a little bit confuse if there is no update for ecspi IP...
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > >  {
> > > +     u32 tx_wml = 0;
> > > +
> > 
> > With a wml of 0 you might set the maxburst of the TX dma channel to
> > fifosize to minimize the performance impact of this workaround.
> > 
> > Regards,
> > Lucas
> 
> Unfortunately, this is a MUST part of errata which cause performance
> drop.

I'm not talking about changing the WML, but when the WML must be 0 you
can safely increase the DMA burst size without overflowing the FIFO,
which might recover some of of the performance loss.

Regards,
Lucas

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > >  {
> > > +     u32 tx_wml = 0;
> > > +
> > 
> > With a wml of 0 you might set the maxburst of the TX dma channel to
> > fifosize to minimize the performance impact of this workaround.
> > 
> > Regards,
> > Lucas
> 
> Unfortunately, this is a MUST part of errata which cause performance
> drop.

I'm not talking about changing the WML, but when the WML must be 0 you
can safely increase the DMA burst size without overflowing the FIFO,
which might recover some of of the performance loss.

Regards,
Lucas

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > >  {
> > > +     u32 tx_wml = 0;
> > > +
> > 
> > With a wml of 0 you might set the maxburst of the TX dma channel to
> > fifosize to minimize the performance impact of this workaround.
> > 
> > Regards,
> > Lucas
> 
> Unfortunately, this is a MUST part of errata which cause performance
> drop.

I'm not talking about changing the WML, but when the WML must be 0 you
can safely increase the DMA burst size without overflowing the FIFO,
which might recover some of of the performance loss.

Regards,
Lucas

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Lucas Stach]

Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > 
> > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > >  {
> > > +     u32 tx_wml = 0;
> > > +
> > 
> > With a wml of 0 you might set the maxburst of the TX dma channel to
> > fifosize to minimize the performance impact of this workaround.
> > 
> > Regards,
> > Lucas
> 
> Unfortunately, this is a MUST part of errata which cause performance
> drop.

I'm not talking about changing the WML, but when the WML must be 0 you
can safely increase the DMA burst size without overflowing the FIFO,
which might recover some of of the performance loss.

Regards,
Lucas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:37 +0200, Lucas Stach wrote:
> Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> > 
> > On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > > 
> > > 
> > > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > > 
> > > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > > >  {
> > > > +     u32 tx_wml = 0;
> > > > +
> > > With a wml of 0 you might set the maxburst of the TX dma channel
> > > to
> > > fifosize to minimize the performance impact of this workaround.
> > > 
> > > Regards,
> > > Lucas
> > Unfortunately, this is a MUST part of errata which cause
> > performance
> > drop.
> I'm not talking about changing the WML, but when the WML must be 0
> you
> can safely increase the DMA burst size without overflowing the FIFO,
> which might recover some of of the performance loss.
> 
> Regards,
> Lucas
Good point, will add it in V3, thanks.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:37 +0200, Lucas Stach wrote:
> Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> > 
> > On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > > 
> > > 
> > > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > > 
> > > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > > >  {
> > > > +     u32 tx_wml = 0;
> > > > +
> > > With a wml of 0 you might set the maxburst of the TX dma channel
> > > to
> > > fifosize to minimize the performance impact of this workaround.
> > > 
> > > Regards,
> > > Lucas
> > Unfortunately, this is a MUST part of errata which cause
> > performance
> > drop.
> I'm not talking about changing the WML, but when the WML must be 0
> you
> can safely increase the DMA burst size without overflowing the FIFO,
> which might recover some of of the performance loss.
> 
> Regards,
> Lucas
Good point, will add it in V3, thanks.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:37 +0200, Lucas Stach wrote:
> Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> > 
> > On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > > 
> > > 
> > > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > > 
> > > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > > >  {
> > > > +     u32 tx_wml = 0;
> > > > +
> > > With a wml of 0 you might set the maxburst of the TX dma channel
> > > to
> > > fifosize to minimize the performance impact of this workaround.
> > > 
> > > Regards,
> > > Lucas
> > Unfortunately, this is a MUST part of errata which cause
> > performance
> > drop.
> I'm not talking about changing the WML, but when the WML must be 0
> you
> can safely increase the DMA burst size without overflowing the FIFO,
> which might recover some of of the performance loss.
> 
> Regards,
> Lucas
Good point, will add it in V3, thanks.

Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165

[Robin Gong]

On 2019-04-26 at 11:37 +0200, Lucas Stach wrote:
> Am Freitag, den 26.04.2019, 09:22 +0000 schrieb Robin Gong:
> > 
> > On 2019-04-26 at 11:07 +0200, Lucas Stach wrote:
> > > 
> > > 
> > > Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong:
> > > > 
> > > >  static void mx51_setup_wml(struct spi_imx_data *spi_imx)
> > > >  {
> > > > +     u32 tx_wml = 0;
> > > > +
> > > With a wml of 0 you might set the maxburst of the TX dma channel
> > > to
> > > fifosize to minimize the performance impact of this workaround.
> > > 
> > > Regards,
> > > Lucas
> > Unfortunately, this is a MUST part of errata which cause
> > performance
> > drop.
> I'm not talking about changing the WML, but when the WML must be 0
> you
> can safely increase the DMA burst size without overflowing the FIFO,
> which might recover some of of the performance loss.
> 
> Regards,
> Lucas
Good point, will add it in V3, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Rob Herring]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

What about other i.MX6 chips?

Seems like this is missing some fallbacks. The binding doc should make 
it clear what are all valid combinations of compatible strings.

>    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
>  - reg : Offset and length of the register set for the device
>  - interrupts : Should contain CSPI/eCSPI interrupt
> -- 
> 2.7.4
>

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Rob Herring]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

What about other i.MX6 chips?

Seems like this is missing some fallbacks. The binding doc should make 
it clear what are all valid combinations of compatible strings.

>    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
>  - reg : Offset and length of the register set for the device
>  - interrupts : Should contain CSPI/eCSPI interrupt
> -- 
> 2.7.4
> 

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Rob Herring]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

What about other i.MX6 chips?

Seems like this is missing some fallbacks. The binding doc should make 
it clear what are all valid combinations of compatible strings.

>    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
>  - reg : Offset and length of the register set for the device
>  - interrupts : Should contain CSPI/eCSPI interrupt
> -- 
> 2.7.4
> 

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Rob Herring]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

What about other i.MX6 chips?

Seems like this is missing some fallbacks. The binding doc should make 
it clear what are all valid combinations of compatible strings.

>    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
>  - reg : Offset and length of the register set for the device
>  - interrupts : Should contain CSPI/eCSPI interrupt
> -- 
> 2.7.4
> 

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Rob Herring]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

What about other i.MX6 chips?

Seems like this is missing some fallbacks. The binding doc should make 
it clear what are all valid combinations of compatible strings.

>    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
>  - reg : Offset and length of the register set for the device
>  - interrupts : Should contain CSPI/eCSPI interrupt
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Rob Herring]

On Fri, 26 Apr 2019 08:06:03 +0000, Robin Gong wrote:
> Add i.mx6ul and i.mx6sx compatible name.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Rob Herring]

On Fri, 26 Apr 2019 08:06:03 +0000, Robin Gong wrote:
> Add i.mx6ul and i.mx6sx compatible name.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Rob Herring]

On Fri, 26 Apr 2019 08:06:03 +0000, Robin Gong wrote:
> Add i.mx6ul and i.mx6sx compatible name.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Rob Herring]

On Fri, 26 Apr 2019 08:06:03 +0000, Robin Gong wrote:
> Add i.mx6ul and i.mx6sx compatible name.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name

[Rob Herring]

On Fri, 26 Apr 2019 08:06:03 +0000, Robin Gong wrote:
> Add i.mx6ul and i.mx6sx compatible name.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2,08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Uwe Kleine-König]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

I wouldn't mention this errata in the binding documentation. Just state
that fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it
might also be used on later SoCs as a "fallback compatible" is a detail
that is so common that I would expect it not being worth mentioning. So
for me it would also be OK to drop "fsl,imx53-ecspi" from the list as
this is only used like:

	compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

(But note that I have no authority here.)

Best regards
Uwe

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Uwe Kleine-König]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="UTF-8", Size: 1633 bytes --]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

I wouldn't mention this errata in the binding documentation. Just state
that fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it
might also be used on later SoCs as a "fallback compatible" is a detail
that is so common that I would expect it not being worth mentioning. So
for me it would also be OK to drop "fsl,imx53-ecspi" from the list as
this is only used like:

	compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

(But note that I have no authority here.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Uwe Kleine-König]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

I wouldn't mention this errata in the binding documentation. Just state
that fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it
might also be used on later SoCs as a "fallback compatible" is a detail
that is so common that I would expect it not being worth mentioning. So
for me it would also be OK to drop "fsl,imx53-ecspi" from the list as
this is only used like:

	compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

(But note that I have no authority here.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Uwe Kleine-König]

On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 2d32641..32c4263d 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -10,6 +10,8 @@ Required properties:
>    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
>    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
>    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> +    (https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf)

I wouldn't mention this errata in the binding documentation. Just state
that fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it
might also be used on later SoCs as a "fallback compatible" is a detail
that is so common that I would expect it not being worth mentioning. So
for me it would also be OK to drop "fsl,imx53-ecspi" from the list as
this is only used like:

	compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

(But note that I have no authority here.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7Cc36708a8219843ffe1d308d6cecbc512%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923771907346428&amp;sdata=9e
> 8c8GK2
> > + hSE90rzyArm8elog9dwNqn4Jeoeff79XwI4%3D&amp;reserved=0)
> 
> I wouldn't mention this errata in the binding documentation. Just state that
> fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it might also be
> used on later SoCs as a "fallback compatible" is a detail that is so common that
Eh...Maybe add one flag member in 'struct spi_imx_devtype_data' to state errata fixed
is better? 
> I would expect it not being worth mentioning. So for me it would also be OK to
> drop "fsl,imx53-ecspi" from the list as this is only used like:
> 
>         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

> 
> (But note that I have no authority here.)
> 
> Best regards
> Uwe
> 
> --
> Pengutronix e.K.                           | Uwe Kleine-König
> |
> Industrial Linux Solutions                 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7Cc36708
> a8219843ffe1d308d6cecbc512%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C1%7C636923771907346428&amp;sdata=McF9ueExCPpCq5Nxa6iJ9h53
> 9d9fO4DIW2IaS90ZdpQ%3D&amp;reserved=0  |

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7Cc36708a8219843ffe1d308d6cecbc512%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923771907346428&amp;sdata=9e
> 8c8GK2
> > + hSE90rzyArm8elog9dwNqn4Jeoeff79XwI4%3D&amp;reserved=0)
> 
> I wouldn't mention this errata in the binding documentation. Just state that
> fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it might also be
> used on later SoCs as a "fallback compatible" is a detail that is so common that
Eh...Maybe add one flag member in 'struct spi_imx_devtype_data' to state errata fixed
is better? 
> I would expect it not being worth mentioning. So for me it would also be OK to
> drop "fsl,imx53-ecspi" from the list as this is only used like:
> 
>         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

> 
> (But note that I have no authority here.)
> 
> Best regards
> Uwe
> 
> --
> Pengutronix e.K.                           | Uwe Kleine-König
> |
> Industrial Linux Solutions                 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7Cc36708
> a8219843ffe1d308d6cecbc512%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C1%7C636923771907346428&amp;sdata=McF9ueExCPpCq5Nxa6iJ9h53
> 9d9fO4DIW2IaS90ZdpQ%3D&amp;reserved=0  |

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7Cc36708a8219843ffe1d308d6cecbc512%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923771907346428&amp;sdata=9e
> 8c8GK2
> > + hSE90rzyArm8elog9dwNqn4Jeoeff79XwI4%3D&amp;reserved=0)
> 
> I wouldn't mention this errata in the binding documentation. Just state that
> fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it might also be
> used on later SoCs as a "fallback compatible" is a detail that is so common that
Eh...Maybe add one flag member in 'struct spi_imx_devtype_data' to state errata fixed
is better? 
> I would expect it not being worth mentioning. So for me it would also be OK to
> drop "fsl,imx53-ecspi" from the list as this is only used like:
> 
>         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

> 
> (But note that I have no authority here.)
> 
> Best regards
> Uwe
> 
> --
> Pengutronix e.K.                           | Uwe Kleine-König
> |
> Industrial Linux Solutions                 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7Cc36708
> a8219843ffe1d308d6cecbc512%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C1%7C636923771907346428&amp;sdata=McF9ueExCPpCq5Nxa6iJ9h53
> 9d9fO4DIW2IaS90ZdpQ%3D&amp;reserved=0  |

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7Cc36708a8219843ffe1d308d6cecbc512%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923771907346428&amp;sdata=9e
> 8c8GK2
> > + hSE90rzyArm8elog9dwNqn4Jeoeff79XwI4%3D&amp;reserved=0)
> 
> I wouldn't mention this errata in the binding documentation. Just state that
> fsl,imx6ul-ecspi is designed to be used on i.MX6UL. And that it might also be
> used on later SoCs as a "fallback compatible" is a detail that is so common that
Eh...Maybe add one flag member in 'struct spi_imx_devtype_data' to state errata fixed
is better? 
> I would expect it not being worth mentioning. So for me it would also be OK to
> drop "fsl,imx53-ecspi" from the list as this is only used like:
> 
>         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";

> 
> (But note that I have no authority here.)
> 
> Best regards
> Uwe
> 
> --
> Pengutronix e.K.                           | Uwe Kleine-König
> |
> Industrial Linux Solutions                 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7Cc36708
> a8219843ffe1d308d6cecbc512%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C1%7C636923771907346428&amp;sdata=McF9ueExCPpCq5Nxa6iJ9h53
> 9d9fO4DIW2IaS90ZdpQ%3D&amp;reserved=0  |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7C1eb9b302759b4af6fbe408d6ce709b8b%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923380371230101&amp;sdata=%
> 2BxM9fN
> > + 6aEFkNlY5KU9qNiqqFMuDEfqGNrzADDiPO9gQ%3D&amp;reserved=0)
> 
> What about other i.MX6 chips?
I only state in the cover letter of this patch set, for i.mx6q/dl/sl/sx still need this
errata which is fixed i.mx chips after i.mx6ul including i.mx6ull,i.mx8m,i.mx8mm.
I'll double confirm again and describe it clearly in commit log in v3.
> 
> Seems like this is missing some fallbacks. The binding doc should make it clear
> what are all valid combinations of compatible strings.
In another Uwe's comment, I'm thinking move such errata information into spi
driver level which makes binding doc clear. What do you think?
> 
> >    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on
> > i.MX8M
> >  - reg : Offset and length of the register set for the device
> >  - interrupts : Should contain CSPI/eCSPI interrupt
> > --
> > 2.7.4
> >

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7C1eb9b302759b4af6fbe408d6ce709b8b%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923380371230101&amp;sdata=%
> 2BxM9fN
> > + 6aEFkNlY5KU9qNiqqFMuDEfqGNrzADDiPO9gQ%3D&amp;reserved=0)
> 
> What about other i.MX6 chips?
I only state in the cover letter of this patch set, for i.mx6q/dl/sl/sx still need this
errata which is fixed i.mx chips after i.mx6ul including i.mx6ull,i.mx8m,i.mx8mm.
I'll double confirm again and describe it clearly in commit log in v3.
> 
> Seems like this is missing some fallbacks. The binding doc should make it clear
> what are all valid combinations of compatible strings.
In another Uwe's comment, I'm thinking move such errata information into spi
driver level which makes binding doc clear. What do you think?
> 
> >    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on
> > i.MX8M
> >  - reg : Offset and length of the register set for the device
> >  - interrupts : Should contain CSPI/eCSPI interrupt
> > --
> > 2.7.4
> >

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7C1eb9b302759b4af6fbe408d6ce709b8b%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923380371230101&amp;sdata=%
> 2BxM9fN
> > + 6aEFkNlY5KU9qNiqqFMuDEfqGNrzADDiPO9gQ%3D&amp;reserved=0)
> 
> What about other i.MX6 chips?
I only state in the cover letter of this patch set, for i.mx6q/dl/sl/sx still need this
errata which is fixed i.mx chips after i.mx6ul including i.mx6ull,i.mx8m,i.mx8mm.
I'll double confirm again and describe it clearly in commit log in v3.
> 
> Seems like this is missing some fallbacks. The binding doc should make it clear
> what are all valid combinations of compatible strings.
In another Uwe's comment, I'm thinking move such errata information into spi
driver level which makes binding doc clear. What do you think?
> 
> >    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on
> > i.MX8M
> >  - reg : Offset and length of the register set for the device
> >  - interrupts : Should contain CSPI/eCSPI interrupt
> > --
> > 2.7.4
> >

RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed

[Robin Gong]

> On Fri, Apr 26, 2019 at 08:05:51AM +0000, Robin Gong wrote:
> > ERR009165 fixed from i.mx6ul, add it to show the errata fixed.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > index 2d32641..32c4263d 100644
> > --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> > @@ -10,6 +10,8 @@ Required properties:
> >    - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> >    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> >    - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
> > i.MX53 and later Soc
> > +  - "fsl,imx6ul-ecspi" ERR009165 fixed on i.MX6UL and later Soc
> > +
> > + (https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > +
> ww.nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyi
> > +
> bin.gong%40nxp.com%7C1eb9b302759b4af6fbe408d6ce709b8b%7C686ea1d
> 3bc2b
> > +
> 4c6fa92cd99c5c301635%7C0%7C1%7C636923380371230101&amp;sdata=%
> 2BxM9fN
> > + 6aEFkNlY5KU9qNiqqFMuDEfqGNrzADDiPO9gQ%3D&amp;reserved=0)
> 
> What about other i.MX6 chips?
I only state in the cover letter of this patch set, for i.mx6q/dl/sl/sx still need this
errata which is fixed i.mx chips after i.mx6ul including i.mx6ull,i.mx8m,i.mx8mm.
I'll double confirm again and describe it clearly in commit log in v3.
> 
> Seems like this is missing some fallbacks. The binding doc should make it clear
> what are all valid combinations of compatible strings.
In another Uwe's comment, I'm thinking move such errata information into spi
driver level which makes binding doc clear. What do you think?
> 
> >    - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on
> > i.MX8M
> >  - reg : Offset and length of the register set for the device
> >  - interrupts : Should contain CSPI/eCSPI interrupt
> > --
> > 2.7.4
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel