[PATCH 00/11] Decoupling PHYLINK from struct net_device

[PATCH 00/11] Decoupling PHYLINK from struct net_device

[Ioana Ciornei]

Following two separate discussion threads in:
  https://www.spinics.net/lists/netdev/msg569087.html
and:
  https://www.spinics.net/lists/netdev/msg570450.html

Previous RFC patch set: https://www.spinics.net/lists/netdev/msg571995.html

PHYLINK was reworked in order to accept multiple operation types,
PHYLINK_NETDEV and PHYLINK_DEV, passed through a phylink_config
structure alongside the corresponding struct device.

One of the main concerns expressed in the RFC was that using notifiers
to signal the corresponding phylink_mac_ops would break PHYLINK's API
unity and that it would become harder to grep for its users.
Using the current approach, we maintain a common API for all users.
Also, printing useful information in PHYLINK, when decoupled from a
net_device, is achieved using dev_err&co on the struct device received
(in DSA's case is the device corresponding to the dsa_switch).

PHYLIB (which PHYLINK uses) was reworked to the extent that it does not
crash when connecting to a PHY and the net_device pointer is NULL.

Lastly, DSA has been reworked in its way that it handles PHYs for ports
that lack a net_device (CPU and DSA ports).  For these, it was
previously using PHYLIB and is now using the PHYLINK_DEV operation type.
Previously, a driver that wanted to support PHY operations on CPU/DSA
ports has to implement .adjust_link(). This patch set not only gives
drivers the options to use PHYLINK uniformly but also urges them to
convert to it. For compatibility, the old code is kept but it will be
removed once all drivers switch over.

The patchset was tested on the NXP LS1021A-TSN board having the
following Ethernet layout:
  https://lkml.org/lkml/2019/5/5/279
The CPU port was moved from the internal RGMII fixed-link (enet2 ->
switch port 4) to an external loopback Cat5 cable between the enet1 port
and the front-facing swp2 SJA1105 port. In this mode, both the master
and the CPU port have an attached PHY which detects link change events:

[   49.105426] fsl-gianfar soc:ethernet@2d50000 eth1: Link is Down
[   50.305486] sja1105 spi0.1: Link is Down
[   53.265596] fsl-gianfar soc:ethernet@2d50000 eth1: Link is Up - 1Gbps/Full - flow control off
[   54.466304] sja1105 spi0.1: Link is Up - 1Gbps/Full - flow control off

Ioana Ciornei (9):
  net: phy: Guard against the presence of a netdev
  net: phy: Check against net_device being NULL
  net: phy: Add phy_standalone sysfs entry
  net: phylink: Add phylink_mac_link_{up,down} wrapper functions
  net: phylink: Add struct phylink_config to PHYLINK API
  net: phylink: Add PHYLINK_DEV operation type
  net: phylink: Add phylink_{printk,err,warn,info,dbg} macros
  net: dsa: Move the phylink driver calls into port.c
  net: dsa: Use PHYLINK for the CPU/DSA ports

Vladimir Oltean (2):
  net: phy: Add phy_sysfs_create_links helper function
  net: dsa: sja1105: Fix broken fixed-link interfaces on user ports

 Documentation/networking/sfp-phylink.rst      |   5 +-
 drivers/net/dsa/sja1105/sja1105_main.c        |  11 +-
 drivers/net/ethernet/marvell/mvneta.c         |  36 ++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |   1 +
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   |  43 ++--
 drivers/net/phy/phy_device.c                  | 100 ++++++--
 drivers/net/phy/phylink.c                     | 220 +++++++++++-------
 include/linux/phylink.h                       |  57 +++--
 include/net/dsa.h                             |   2 +
 net/dsa/dsa_priv.h                            |  17 ++
 net/dsa/port.c                                | 157 +++++++++++++
 net/dsa/slave.c                               |  99 +-------
 12 files changed, 491 insertions(+), 257 deletions(-)

-- 
2.21.0

[PATCH 01/11] net: phy: Add phy_sysfs_create_links helper function

[Ioana Ciornei]

From: Vladimir Oltean <olteanv@gmail.com>

This is a cosmetic patch that wraps the operation of creating sysfs
links between the netdev->phydev and the phydev->attached_dev.

This is needed to keep the indentation level in check in a follow-up
patch where this function will be guarded against the existence of a
phydev->attached_dev.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/phy_device.c | 43 ++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5d288da9a3b0..8fd1bf37718b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1133,6 +1133,31 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 }
 EXPORT_SYMBOL(phy_attached_print);
 
+static void phy_sysfs_create_links(struct phy_device *phydev)
+{
+	struct net_device *dev = phydev->attached_dev;
+	int err;
+
+	err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
+				"attached_dev");
+	if (err)
+		return;
+
+	err = sysfs_create_link_nowarn(&dev->dev.kobj,
+				       &phydev->mdio.dev.kobj,
+				       "phydev");
+	if (err) {
+		dev_err(&dev->dev, "could not add device link to %s err %d\n",
+			kobject_name(&phydev->mdio.dev.kobj),
+			err);
+		/* non-fatal - some net drivers can use one netdevice
+		 * with more then one phy
+		 */
+	}
+
+	phydev->sysfs_links = true;
+}
+
 /**
  * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
@@ -1216,23 +1241,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	 */
 	phydev->sysfs_links = false;
 
-	err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
-				"attached_dev");
-	if (!err) {
-		err = sysfs_create_link_nowarn(&dev->dev.kobj,
-					       &phydev->mdio.dev.kobj,
-					       "phydev");
-		if (err) {
-			dev_err(&dev->dev, "could not add device link to %s err %d\n",
-				kobject_name(&phydev->mdio.dev.kobj),
-				err);
-			/* non-fatal - some net drivers can use one netdevice
-			 * with more then one phy
-			 */
-		}
-
-		phydev->sysfs_links = true;
-	}
+	phy_sysfs_create_links(phydev);
 
 	phydev->dev_flags = flags;
 
-- 
2.21.0

[PATCH 02/11] net: phy: Guard against the presence of a netdev

[Ioana Ciornei]

A prerequisite for PHYLIB to work in the absence of a struct net_device
is to not access pointers to it.

Changes are needed in the following areas:

 - Printing: In some places netdev_err was replaced with phydev_err.

 - Incrementing reference count to the parent MDIO bus driver: If there
   is no net device, then the reference count should definitely be
   incremented since there is no chance that it was an Ethernet driver
   who registered the MDIO bus.

 - Sysfs links are not created in case there is no attached_dev.

 - No netif_carrier_off is done if there is no attached_dev.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/phy_device.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8fd1bf37718b..da3bf3f70d63 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1138,6 +1138,9 @@ static void phy_sysfs_create_links(struct phy_device *phydev)
 	struct net_device *dev = phydev->attached_dev;
 	int err;
 
+	if (!dev)
+		return;
+
 	err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
 				"attached_dev");
 	if (err)
@@ -1176,9 +1179,9 @@ static void phy_sysfs_create_links(struct phy_device *phydev)
 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		      u32 flags, phy_interface_t interface)
 {
-	struct module *ndev_owner = dev->dev.parent->driver->owner;
 	struct mii_bus *bus = phydev->mdio.bus;
 	struct device *d = &phydev->mdio.dev;
+	struct module *ndev_owner = NULL;
 	bool using_genphy = false;
 	int err;
 
@@ -1187,8 +1190,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	 * our own module->refcnt here, otherwise we would not be able to
 	 * unload later on.
 	 */
+	if (dev)
+		ndev_owner = dev->dev.parent->driver->owner;
 	if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
-		dev_err(&dev->dev, "failed to get the bus module\n");
+		phydev_err(phydev, "failed to get the bus module\n");
 		return -EIO;
 	}
 
@@ -1207,7 +1212,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	}
 
 	if (!try_module_get(d->driver->owner)) {
-		dev_err(&dev->dev, "failed to get the device driver module\n");
+		phydev_err(phydev, "failed to get the device driver module\n");
 		err = -EIO;
 		goto error_put_device;
 	}
@@ -1228,8 +1233,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	}
 
 	phydev->phy_link_change = phy_link_change;
-	phydev->attached_dev = dev;
-	dev->phydev = phydev;
+	if (dev) {
+		phydev->attached_dev = dev;
+		dev->phydev = phydev;
+	}
 
 	/* Some Ethernet drivers try to connect to a PHY device before
 	 * calling register_netdevice() -> netdev_register_kobject() and
@@ -1252,7 +1259,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	/* Initial carrier state is off as the phy is about to be
 	 * (re)initialized.
 	 */
-	netif_carrier_off(phydev->attached_dev);
+	if (dev)
+		netif_carrier_off(phydev->attached_dev);
 
 	/* Do initial configuration here, now that
 	 * we have certain key parameters
@@ -1358,16 +1366,19 @@ EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
 void phy_detach(struct phy_device *phydev)
 {
 	struct net_device *dev = phydev->attached_dev;
-	struct module *ndev_owner = dev->dev.parent->driver->owner;
+	struct module *ndev_owner = NULL;
 	struct mii_bus *bus;
 
 	if (phydev->sysfs_links) {
-		sysfs_remove_link(&dev->dev.kobj, "phydev");
+		if (dev)
+			sysfs_remove_link(&dev->dev.kobj, "phydev");
 		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
 	}
 	phy_suspend(phydev);
-	phydev->attached_dev->phydev = NULL;
-	phydev->attached_dev = NULL;
+	if (dev) {
+		phydev->attached_dev->phydev = NULL;
+		phydev->attached_dev = NULL;
+	}
 	phydev->phylink = NULL;
 
 	phy_led_triggers_unregister(phydev);
@@ -1390,6 +1401,8 @@ void phy_detach(struct phy_device *phydev)
 	bus = phydev->mdio.bus;
 
 	put_device(&phydev->mdio.dev);
+	if (dev)
+		ndev_owner = dev->dev.parent->driver->owner;
 	if (ndev_owner != bus->owner)
 		module_put(bus->owner);
 
-- 
2.21.0

[PATCH 03/11] net: phy: Check against net_device being NULL

[Ioana Ciornei]

In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy_device.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index da3bf3f70d63..0b7730fd41ba 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -948,6 +948,9 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 {
 	int rc;
 
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
 	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 	if (rc)
 		return rc;
@@ -1307,6 +1310,9 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 	struct device *d;
 	int rc;
 
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
 	/* Search the list of PHY devices on the mdio bus for the
 	 * PHY with the requested name
 	 */
-- 
2.21.0

[PATCH 04/11] net: phy: Add phy_standalone sysfs entry

[Ioana Ciornei]

Export a phy_standalone device attribute that is meant to give the
indication that this PHY lacks an attached_dev and its corresponding
sysfs link. The attribute will be created only when the
phy_attach_direct() function will be called with a NULL net_device.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/phy_device.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0b7730fd41ba..711971897e10 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1164,6 +1164,16 @@ static void phy_sysfs_create_links(struct phy_device *phydev)
 	phydev->sysfs_links = true;
 }
 
+static ssize_t
+phy_standalone_show(struct device *dev, struct device_attribute *attr,
+		    char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	return sprintf(buf, "%d\n", !phydev->attached_dev);
+}
+static DEVICE_ATTR_RO(phy_standalone);
+
 /**
  * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
@@ -1253,6 +1263,13 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 
 	phy_sysfs_create_links(phydev);
 
+	if (!phydev->attached_dev) {
+		err = sysfs_create_file(&phydev->mdio.dev.kobj,
+					&dev_attr_phy_standalone.attr);
+		if (err)
+			phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n");
+	}
+
 	phydev->dev_flags = flags;
 
 	phydev->interface = interface;
@@ -1380,6 +1397,11 @@ void phy_detach(struct phy_device *phydev)
 			sysfs_remove_link(&dev->dev.kobj, "phydev");
 		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
 	}
+
+	if (!phydev->attached_dev)
+		sysfs_remove_file(&phydev->mdio.dev.kobj,
+				  &dev_attr_phy_standalone.attr);
+
 	phy_suspend(phydev);
 	if (dev) {
 		phydev->attached_dev->phydev = NULL;
-- 
2.21.0

[PATCH 05/11] net: phylink: Add phylink_mac_link_{up,down} wrapper functions

[Ioana Ciornei]

This is a cosmetic patch that reduces the clutter in phylink_resolve
around calling the .mac_link_up/.mac_link_down driver callbacks.  In a
further patch this logic will be extended to emit notifications in case
a net device does not exist.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/phylink.c | 50 +++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 74983593834b..83ab83c3edba 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -395,6 +395,34 @@ static const char *phylink_pause_to_str(int pause)
 	}
 }
 
+static void phylink_mac_link_up(struct phylink *pl,
+				struct phylink_link_state link_state)
+{
+	struct net_device *ndev = pl->netdev;
+
+	pl->ops->mac_link_up(ndev, pl->link_an_mode,
+			     pl->phy_state.interface,
+			     pl->phydev);
+
+	netif_carrier_on(ndev);
+
+	netdev_info(ndev,
+		    "Link is Up - %s/%s - flow control %s\n",
+		    phy_speed_to_str(link_state.speed),
+		    phy_duplex_to_str(link_state.duplex),
+		    phylink_pause_to_str(link_state.pause));
+}
+
+static void phylink_mac_link_down(struct phylink *pl)
+{
+	struct net_device *ndev = pl->netdev;
+
+	netif_carrier_off(ndev);
+	pl->ops->mac_link_down(ndev, pl->link_an_mode,
+			       pl->phy_state.interface);
+	netdev_info(ndev, "Link is Down\n");
+}
+
 static void phylink_resolve(struct work_struct *w)
 {
 	struct phylink *pl = container_of(w, struct phylink, resolve);
@@ -443,24 +471,10 @@ static void phylink_resolve(struct work_struct *w)
 	}
 
 	if (link_state.link != netif_carrier_ok(ndev)) {
-		if (!link_state.link) {
-			netif_carrier_off(ndev);
-			pl->ops->mac_link_down(ndev, pl->link_an_mode,
-					       pl->phy_state.interface);
-			netdev_info(ndev, "Link is Down\n");
-		} else {
-			pl->ops->mac_link_up(ndev, pl->link_an_mode,
-					     pl->phy_state.interface,
-					     pl->phydev);
-
-			netif_carrier_on(ndev);
-
-			netdev_info(ndev,
-				    "Link is Up - %s/%s - flow control %s\n",
-				    phy_speed_to_str(link_state.speed),
-				    phy_duplex_to_str(link_state.duplex),
-				    phylink_pause_to_str(link_state.pause));
-		}
+		if (!link_state.link)
+			phylink_mac_link_down(pl);
+		else
+			phylink_mac_link_up(pl, link_state);
 	}
 	if (!link_state.link && pl->mac_link_dropped) {
 		pl->mac_link_dropped = false;
-- 
2.21.0

[PATCH 06/11] net: phylink: Add struct phylink_config to PHYLINK API

[Ioana Ciornei]

The phylink_config structure will encapsulate a pointer to a struct
device and the operation type requested for this instance of PHYLINK.
This patch does not make any functional changes, it just transitions the
PHYLINK internals and all its users to the new API.

A pointer to a phylink_config structure will be passed to
phylink_create() instead of the net_device directly. Also, the same
phylink_config pointer will be passed back to all phylink_mac_ops
callbacks instead of the net_device. Using this mechanism, a PHYLINK
user can get the original net_device using a structure such as
'to_net_dev(config->dev)' or directly the structure containing the
phylink_config using a container_of call.

At the moment, only the PHYLINK_NETDEV is defined as a valid operation
type for PHYLINK. In this mode, a valid reference to a struct device
linked to the original net_device should be passed to PHYLINK through
the phylink_config structure.

This API changes is mainly driven by the necessity of adding a new
operation type in PHYLINK that disconnects the phy_device from the
net_device and also works when the net_device is lacking.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 Documentation/networking/sfp-phylink.rst      |  5 +-
 drivers/net/ethernet/marvell/mvneta.c         | 36 ++++++++----
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |  1 +
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 43 ++++++++------
 drivers/net/phy/phylink.c                     | 26 ++++++---
 include/linux/phylink.h                       | 56 ++++++++++++-------
 include/net/dsa.h                             |  2 +
 net/dsa/slave.c                               | 31 +++++-----
 8 files changed, 128 insertions(+), 72 deletions(-)

diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst
index 5bd26cb07244..91446b431b70 100644
--- a/Documentation/networking/sfp-phylink.rst
+++ b/Documentation/networking/sfp-phylink.rst
@@ -98,6 +98,7 @@ this documentation.
 4. Add::
 
 	struct phylink *phylink;
+	struct phylink_config phylink_config;
 
    to the driver's private data structure.  We shall refer to the
    driver's private data pointer as ``priv`` below, and the driver's
@@ -223,8 +224,10 @@ this documentation.
    .. code-block:: c
 
 	struct phylink *phylink;
+	priv->phylink_config.dev = &dev.dev;
+	priv->phylink_config.type = PHYLINK_NETDEV;
 
-	phylink = phylink_create(dev, node, phy_mode, &phylink_ops);
+	phylink = phylink_create(&priv->phylink_config, node, phy_mode, &phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
 		fail probe;
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e758650b2c26..adbbcdde73e6 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -437,6 +437,7 @@ struct mvneta_port {
 	struct device_node *dn;
 	unsigned int tx_csum_limit;
 	struct phylink *phylink;
+	struct phylink_config phylink_config;
 	struct phy *comphy;
 
 	struct mvneta_bm *bm_priv;
@@ -3356,9 +3357,11 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
 	return 0;
 }
 
-static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
+static void mvneta_validate(struct phylink_config *config,
+			    unsigned long *supported,
 			    struct phylink_link_state *state)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
@@ -3408,9 +3411,10 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
 	phylink_helper_basex_speed(state);
 }
 
-static int mvneta_mac_link_state(struct net_device *ndev,
+static int mvneta_mac_link_state(struct phylink_config *config,
 				 struct phylink_link_state *state)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	u32 gmac_stat;
 
@@ -3438,8 +3442,9 @@ static int mvneta_mac_link_state(struct net_device *ndev,
 	return 1;
 }
 
-static void mvneta_mac_an_restart(struct net_device *ndev)
+static void mvneta_mac_an_restart(struct phylink_config *config)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
 
@@ -3449,9 +3454,10 @@ static void mvneta_mac_an_restart(struct net_device *ndev)
 		    gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
 }
 
-static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
-	const struct phylink_link_state *state)
+static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
+			      const struct phylink_link_state *state)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
 	u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
@@ -3581,9 +3587,10 @@ static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
 	mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
 }
 
-static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode,
-				 phy_interface_t interface)
+static void mvneta_mac_link_down(struct phylink_config *config,
+				 unsigned int mode, phy_interface_t interface)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	u32 val;
 
@@ -3600,10 +3607,11 @@ static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode,
 	mvneta_set_eee(pp, false);
 }
 
-static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
+static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode,
 			       phy_interface_t interface,
 			       struct phy_device *phy)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
 	struct mvneta_port *pp = netdev_priv(ndev);
 	u32 val;
 
@@ -4500,8 +4508,14 @@ static int mvneta_probe(struct platform_device *pdev)
 		comphy = NULL;
 	}
 
-	phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
-				 &mvneta_phylink_ops);
+	pp = netdev_priv(dev);
+	spin_lock_init(&pp->lock);
+
+	pp->phylink_config.dev = &dev->dev;
+	pp->phylink_config.type = PHYLINK_NETDEV;
+
+	phylink = phylink_create(&pp->phylink_config, pdev->dev.fwnode,
+				 phy_mode, &mvneta_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
 		goto err_free_irq;
@@ -4513,8 +4527,6 @@ static int mvneta_probe(struct platform_device *pdev)
 
 	dev->ethtool_ops = &mvneta_eth_tool_ops;
 
-	pp = netdev_priv(dev);
-	spin_lock_init(&pp->lock);
 	pp->phylink = phylink;
 	pp->comphy = comphy;
 	pp->phy_interface = phy_mode;
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 18ae8d06b692..d67c970f02e5 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -915,6 +915,7 @@ struct mvpp2_port {
 
 	phy_interface_t phy_interface;
 	struct phylink *phylink;
+	struct phylink_config phylink_config;
 	struct phy *comphy;
 
 	struct mvpp2_bm_pool *pool_long;
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 3ed713b8dea5..757f8e31645e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -56,9 +56,9 @@ static struct {
 /* The prototype is added here to be used in start_dev when using ACPI. This
  * will be removed once phylink is used for all modes (dt+ACPI).
  */
-static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
+static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
 			     const struct phylink_link_state *state);
-static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
+static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface, struct phy_device *phy);
 
 /* Queue modes */
@@ -3239,9 +3239,9 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
 		struct phylink_link_state state = {
 			.interface = port->phy_interface,
 		};
-		mvpp2_mac_config(port->dev, MLO_AN_INBAND, &state);
-		mvpp2_mac_link_up(port->dev, MLO_AN_INBAND, port->phy_interface,
-				  NULL);
+		mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
+		mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND,
+				  port->phy_interface, NULL);
 	}
 
 	netif_tx_start_all_queues(port->dev);
@@ -4463,11 +4463,12 @@ static void mvpp2_port_copy_mac_addr(struct net_device *dev, struct mvpp2 *priv,
 	eth_hw_addr_random(dev);
 }
 
-static void mvpp2_phylink_validate(struct net_device *dev,
+static void mvpp2_phylink_validate(struct phylink_config *config,
 				   unsigned long *supported,
 				   struct phylink_link_state *state)
 {
-	struct mvpp2_port *port = netdev_priv(dev);
+	struct mvpp2_port *port = container_of(config, struct mvpp2_port,
+					       phylink_config);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
 	/* Invalid combinations */
@@ -4591,10 +4592,11 @@ static void mvpp2_gmac_link_state(struct mvpp2_port *port,
 		state->pause |= MLO_PAUSE_TX;
 }
 
-static int mvpp2_phylink_mac_link_state(struct net_device *dev,
+static int mvpp2_phylink_mac_link_state(struct phylink_config *config,
 					struct phylink_link_state *state)
 {
-	struct mvpp2_port *port = netdev_priv(dev);
+	struct mvpp2_port *port = container_of(config, struct mvpp2_port,
+					       phylink_config);
 
 	if (port->priv->hw_version == MVPP22 && port->gop_id == 0) {
 		u32 mode = readl(port->base + MVPP22_XLG_CTRL3_REG);
@@ -4610,9 +4612,10 @@ static int mvpp2_phylink_mac_link_state(struct net_device *dev,
 	return 1;
 }
 
-static void mvpp2_mac_an_restart(struct net_device *dev)
+static void mvpp2_mac_an_restart(struct phylink_config *config)
 {
-	struct mvpp2_port *port = netdev_priv(dev);
+	struct mvpp2_port *port = container_of(config, struct mvpp2_port,
+					       phylink_config);
 	u32 val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
 
 	writel(val | MVPP2_GMAC_IN_BAND_RESTART_AN,
@@ -4797,9 +4800,10 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
 	}
 }
 
-static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
+static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
 			     const struct phylink_link_state *state)
 {
+	struct net_device *dev = to_net_dev(config->dev);
 	struct mvpp2_port *port = netdev_priv(dev);
 	bool change_interface = port->phy_interface != state->interface;
 
@@ -4839,9 +4843,10 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
 	mvpp2_port_enable(port);
 }
 
-static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
+static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface, struct phy_device *phy)
 {
+	struct net_device *dev = to_net_dev(config->dev);
 	struct mvpp2_port *port = netdev_priv(dev);
 	u32 val;
 
@@ -4866,9 +4871,10 @@ static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
 	netif_tx_wake_all_queues(dev);
 }
 
-static void mvpp2_mac_link_down(struct net_device *dev, unsigned int mode,
-				phy_interface_t interface)
+static void mvpp2_mac_link_down(struct phylink_config *config,
+				unsigned int mode, phy_interface_t interface)
 {
+	struct net_device *dev = to_net_dev(config->dev);
 	struct mvpp2_port *port = netdev_priv(dev);
 	u32 val;
 
@@ -5125,8 +5131,11 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 
 	/* Phylink isn't used w/ ACPI as of now */
 	if (port_node) {
-		phylink = phylink_create(dev, port_fwnode, phy_mode,
-					 &mvpp2_phylink_ops);
+		port->phylink_config.dev = &dev->dev;
+		port->phylink_config.type = PHYLINK_NETDEV;
+
+		phylink = phylink_create(&port->phylink_config, port_fwnode,
+					 phy_mode, &mvpp2_phylink_ops);
 		if (IS_ERR(phylink)) {
 			err = PTR_ERR(phylink);
 			goto err_free_port_pcpu;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 83ab83c3edba..5a283bf9d402 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -41,6 +41,7 @@ struct phylink {
 	/* private: */
 	struct net_device *netdev;
 	const struct phylink_mac_ops *ops;
+	struct phylink_config *config;
 
 	unsigned long phylink_disable_state; /* bitmask of disables */
 	struct phy_device *phydev;
@@ -111,7 +112,7 @@ static const char *phylink_an_mode_str(unsigned int mode)
 static int phylink_validate(struct phylink *pl, unsigned long *supported,
 			    struct phylink_link_state *state)
 {
-	pl->ops->validate(pl->netdev, supported, state);
+	pl->ops->validate(pl->config, supported, state);
 
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
@@ -299,7 +300,7 @@ static void phylink_mac_config(struct phylink *pl,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
 		   state->pause, state->link, state->an_enabled);
 
-	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
+	pl->ops->mac_config(pl->config, pl->link_an_mode, state);
 }
 
 static void phylink_mac_config_up(struct phylink *pl,
@@ -313,12 +314,11 @@ static void phylink_mac_an_restart(struct phylink *pl)
 {
 	if (pl->link_config.an_enabled &&
 	    phy_interface_mode_is_8023z(pl->link_config.interface))
-		pl->ops->mac_an_restart(pl->netdev);
+		pl->ops->mac_an_restart(pl->config);
 }
 
 static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
 {
-	struct net_device *ndev = pl->netdev;
 
 	linkmode_copy(state->advertising, pl->link_config.advertising);
 	linkmode_zero(state->lp_advertising);
@@ -330,7 +330,7 @@ static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *
 	state->an_complete = 0;
 	state->link = 1;
 
-	return pl->ops->mac_link_state(ndev, state);
+	return pl->ops->mac_link_state(pl->config, state);
 }
 
 /* The fixed state is... fixed except for the link state,
@@ -400,7 +400,7 @@ static void phylink_mac_link_up(struct phylink *pl,
 {
 	struct net_device *ndev = pl->netdev;
 
-	pl->ops->mac_link_up(ndev, pl->link_an_mode,
+	pl->ops->mac_link_up(pl->config, pl->link_an_mode,
 			     pl->phy_state.interface,
 			     pl->phydev);
 
@@ -418,7 +418,7 @@ static void phylink_mac_link_down(struct phylink *pl)
 	struct net_device *ndev = pl->netdev;
 
 	netif_carrier_off(ndev);
-	pl->ops->mac_link_down(ndev, pl->link_an_mode,
+	pl->ops->mac_link_down(pl->config, pl->link_an_mode,
 			       pl->phy_state.interface);
 	netdev_info(ndev, "Link is Down\n");
 }
@@ -553,7 +553,7 @@ static int phylink_register_sfp(struct phylink *pl,
  * Returns a pointer to a &struct phylink, or an error-pointer value. Users
  * must use IS_ERR() to check for errors from this function.
  */
-struct phylink *phylink_create(struct net_device *ndev,
+struct phylink *phylink_create(struct phylink_config *config,
 			       struct fwnode_handle *fwnode,
 			       phy_interface_t iface,
 			       const struct phylink_mac_ops *ops)
@@ -567,7 +567,15 @@ struct phylink *phylink_create(struct net_device *ndev,
 
 	mutex_init(&pl->state_mutex);
 	INIT_WORK(&pl->resolve, phylink_resolve);
-	pl->netdev = ndev;
+
+	pl->config = config;
+	if (config->type == PHYLINK_NETDEV) {
+		pl->netdev = to_net_dev(config->dev);
+	} else {
+		kfree(pl);
+		return ERR_PTR(-EINVAL);
+	}
+
 	pl->phy_state.interface = iface;
 	pl->link_interface = iface;
 	if (iface == PHY_INTERFACE_MODE_MOCA)
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 6411c624f63a..67f35f07ac4b 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -54,6 +54,20 @@ struct phylink_link_state {
 	unsigned int an_complete:1;
 };
 
+enum phylink_op_type {
+	PHYLINK_NETDEV = 0,
+};
+
+/**
+ * struct phylink_config - PHYLINK configuration structure
+ * @dev: a pointer to a struct device associated with the MAC
+ * @type: operation type of PHYLINK instance
+ */
+struct phylink_config {
+	struct device *dev;
+	enum phylink_op_type type;
+};
+
 /**
  * struct phylink_mac_ops - MAC operations structure.
  * @validate: Validate and update the link configuration.
@@ -66,16 +80,17 @@ struct phylink_link_state {
  * The individual methods are described more fully below.
  */
 struct phylink_mac_ops {
-	void (*validate)(struct net_device *ndev, unsigned long *supported,
+	void (*validate)(struct phylink_config *config,
+			 unsigned long *supported,
 			 struct phylink_link_state *state);
-	int (*mac_link_state)(struct net_device *ndev,
+	int (*mac_link_state)(struct phylink_config *config,
 			      struct phylink_link_state *state);
-	void (*mac_config)(struct net_device *ndev, unsigned int mode,
+	void (*mac_config)(struct phylink_config *config, unsigned int mode,
 			   const struct phylink_link_state *state);
-	void (*mac_an_restart)(struct net_device *ndev);
-	void (*mac_link_down)(struct net_device *ndev, unsigned int mode,
+	void (*mac_an_restart)(struct phylink_config *config);
+	void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface);
-	void (*mac_link_up)(struct net_device *ndev, unsigned int mode,
+	void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
 			    phy_interface_t interface,
 			    struct phy_device *phy);
 };
@@ -83,7 +98,7 @@ struct phylink_mac_ops {
 #if 0 /* For kernel-doc purposes only. */
 /**
  * validate - Validate and update the link configuration
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  * @supported: ethtool bitmask for supported link modes.
  * @state: a pointer to a &struct phylink_link_state.
  *
@@ -100,12 +115,12 @@ struct phylink_mac_ops {
  * based on @state->advertising and/or @state->speed and update
  * @state->interface accordingly.
  */
-void validate(struct net_device *ndev, unsigned long *supported,
+void validate(struct phylink_config *config, unsigned long *supported,
 	      struct phylink_link_state *state);
 
 /**
  * mac_link_state() - Read the current link state from the hardware
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Read the current link state from the MAC, reporting the current
@@ -114,12 +129,12 @@ void validate(struct net_device *ndev, unsigned long *supported,
  * negotiation completion state in @state->an_complete, and link
  * up state in @state->link.
  */
-int mac_link_state(struct net_device *ndev,
+int mac_link_state(struct phylink_config *config,
 		   struct phylink_link_state *state);
 
 /**
  * mac_config() - configure the MAC for the selected mode and state
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
  * @state: a pointer to a &struct phylink_link_state.
  *
@@ -157,18 +172,18 @@ int mac_link_state(struct net_device *ndev,
  * down.  This "update" behaviour is critical to avoid bouncing the
  * link up status.
  */
-void mac_config(struct net_device *ndev, unsigned int mode,
+void mac_config(struct phylink_config *config, unsigned int mode,
 		const struct phylink_link_state *state);
 
 /**
  * mac_an_restart() - restart 802.3z BaseX autonegotiation
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  */
-void mac_an_restart(struct net_device *ndev);
+void mac_an_restart(struct phylink_config *config);
 
 /**
  * mac_link_down() - take the link down
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  * @mode: link autonegotiation mode
  * @interface: link &typedef phy_interface_t mode
  *
@@ -177,12 +192,12 @@ void mac_an_restart(struct net_device *ndev);
  * Energy Efficient Ethernet MAC configuration. Interface type
  * selection must be done in mac_config().
  */
-void mac_link_down(struct net_device *ndev, unsigned int mode,
+void mac_link_down(struct phylink_config *config, unsigned int mode,
 		   phy_interface_t interface);
 
 /**
  * mac_link_up() - allow the link to come up
- * @ndev: a pointer to a &struct net_device for the MAC.
+ * @config: a pointer to a &struct phylink_config.
  * @mode: link autonegotiation mode
  * @interface: link &typedef phy_interface_t mode
  * @phy: any attached phy
@@ -193,13 +208,14 @@ void mac_link_down(struct net_device *ndev, unsigned int mode,
  * phy_init_eee() and perform appropriate MAC configuration for EEE.
  * Interface type selection must be done in mac_config().
  */
-void mac_link_up(struct net_device *ndev, unsigned int mode,
+void mac_link_up(struct phylink_config *config, unsigned int mode,
 		 phy_interface_t interface,
 		 struct phy_device *phy);
 #endif
 
-struct phylink *phylink_create(struct net_device *, struct fwnode_handle *,
-	phy_interface_t iface, const struct phylink_mac_ops *ops);
+struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
+			       phy_interface_t iface,
+			       const struct phylink_mac_ops *ops);
 void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 685294817712..a7f36219904f 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -22,6 +22,7 @@
 #include <linux/net_tstamp.h>
 #include <linux/phy.h>
 #include <linux/platform_data/dsa.h>
+#include <linux/phylink.h>
 #include <net/devlink.h>
 #include <net/switchdev.h>
 
@@ -193,6 +194,7 @@ struct dsa_port {
 	struct net_device	*bridge_dev;
 	struct devlink_port	devlink_port;
 	struct phylink		*pl;
+	struct phylink_config	pl_config;
 
 	struct work_struct	xmit_work;
 	struct sk_buff_head	xmit_queue;
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9892ca1f6859..48e017637d4f 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1164,11 +1164,11 @@ static struct device_type dsa_type = {
 	.name	= "dsa",
 };
 
-static void dsa_slave_phylink_validate(struct net_device *dev,
+static void dsa_slave_phylink_validate(struct phylink_config *config,
 				       unsigned long *supported,
 				       struct phylink_link_state *state)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_validate)
@@ -1177,10 +1177,10 @@ static void dsa_slave_phylink_validate(struct net_device *dev,
 	ds->ops->phylink_validate(ds, dp->index, supported, state);
 }
 
-static int dsa_slave_phylink_mac_link_state(struct net_device *dev,
+static int dsa_slave_phylink_mac_link_state(struct phylink_config *config,
 					    struct phylink_link_state *state)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
 	struct dsa_switch *ds = dp->ds;
 
 	/* Only called for SGMII and 802.3z */
@@ -1190,11 +1190,11 @@ static int dsa_slave_phylink_mac_link_state(struct net_device *dev,
 	return ds->ops->phylink_mac_link_state(ds, dp->index, state);
 }
 
-static void dsa_slave_phylink_mac_config(struct net_device *dev,
+static void dsa_slave_phylink_mac_config(struct phylink_config *config,
 					 unsigned int mode,
 					 const struct phylink_link_state *state)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_mac_config)
@@ -1203,9 +1203,9 @@ static void dsa_slave_phylink_mac_config(struct net_device *dev,
 	ds->ops->phylink_mac_config(ds, dp->index, mode, state);
 }
 
-static void dsa_slave_phylink_mac_an_restart(struct net_device *dev)
+static void dsa_slave_phylink_mac_an_restart(struct phylink_config *config)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_mac_an_restart)
@@ -1214,11 +1214,12 @@ static void dsa_slave_phylink_mac_an_restart(struct net_device *dev)
 	ds->ops->phylink_mac_an_restart(ds, dp->index);
 }
 
-static void dsa_slave_phylink_mac_link_down(struct net_device *dev,
+static void dsa_slave_phylink_mac_link_down(struct phylink_config *config,
 					    unsigned int mode,
 					    phy_interface_t interface)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct net_device *dev = dp->slave;
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_mac_link_down) {
@@ -1230,12 +1231,13 @@ static void dsa_slave_phylink_mac_link_down(struct net_device *dev,
 	ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
 }
 
-static void dsa_slave_phylink_mac_link_up(struct net_device *dev,
+static void dsa_slave_phylink_mac_link_up(struct phylink_config *config,
 					  unsigned int mode,
 					  phy_interface_t interface,
 					  struct phy_device *phydev)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct net_device *dev = dp->slave;
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_mac_link_up) {
@@ -1303,7 +1305,10 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
 	if (mode < 0)
 		mode = PHY_INTERFACE_MODE_NA;
 
-	dp->pl = phylink_create(slave_dev, of_fwnode_handle(port_dn), mode,
+	dp->pl_config.dev = &slave_dev->dev;
+	dp->pl_config.type = PHYLINK_NETDEV;
+
+	dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode,
 				&dsa_slave_phylink_mac_ops);
 	if (IS_ERR(dp->pl)) {
 		netdev_err(slave_dev,
-- 
2.21.0

[PATCH 07/11] net: phylink: Add PHYLINK_DEV operation type

[Ioana Ciornei]

In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work
without an attached net_device. For printing usecases, instead, a struct
device * should be passed to PHYLINK using the phylink_config structure.

Also, netif_carrier_* calls ar guarded by the presence of a valid
net_device. When using the PHYLINK_DEV operation type, we cannot check
link status using the netif_carrier_ok() API so instead, keep an
internal state of the MAC and call mac_link_{down,up} only when the link
changed.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/phy/phylink.c | 25 ++++++++++++++++++++-----
 include/linux/phylink.h   |  1 +
 2 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5a283bf9d402..5f6120f3fa3f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -42,6 +42,8 @@ struct phylink {
 	struct net_device *netdev;
 	const struct phylink_mac_ops *ops;
 	struct phylink_config *config;
+	struct device *dev;
+	unsigned int old_link_state:1;
 
 	unsigned long phylink_disable_state; /* bitmask of disables */
 	struct phy_device *phydev;
@@ -404,7 +406,8 @@ static void phylink_mac_link_up(struct phylink *pl,
 			     pl->phy_state.interface,
 			     pl->phydev);
 
-	netif_carrier_on(ndev);
+	if (ndev)
+		netif_carrier_on(ndev);
 
 	netdev_info(ndev,
 		    "Link is Up - %s/%s - flow control %s\n",
@@ -417,7 +420,8 @@ static void phylink_mac_link_down(struct phylink *pl)
 {
 	struct net_device *ndev = pl->netdev;
 
-	netif_carrier_off(ndev);
+	if (ndev)
+		netif_carrier_off(ndev);
 	pl->ops->mac_link_down(pl->config, pl->link_an_mode,
 			       pl->phy_state.interface);
 	netdev_info(ndev, "Link is Down\n");
@@ -428,6 +432,7 @@ static void phylink_resolve(struct work_struct *w)
 	struct phylink *pl = container_of(w, struct phylink, resolve);
 	struct phylink_link_state link_state;
 	struct net_device *ndev = pl->netdev;
+	int link_changed;
 
 	mutex_lock(&pl->state_mutex);
 	if (pl->phylink_disable_state) {
@@ -470,7 +475,13 @@ static void phylink_resolve(struct work_struct *w)
 		}
 	}
 
-	if (link_state.link != netif_carrier_ok(ndev)) {
+	if (pl->netdev)
+		link_changed = (link_state.link != netif_carrier_ok(ndev));
+	else
+		link_changed = (link_state.link != pl->old_link_state);
+
+	if (link_changed) {
+		pl->old_link_state = link_state.link;
 		if (!link_state.link)
 			phylink_mac_link_down(pl);
 		else
@@ -571,6 +582,8 @@ struct phylink *phylink_create(struct phylink_config *config,
 	pl->config = config;
 	if (config->type == PHYLINK_NETDEV) {
 		pl->netdev = to_net_dev(config->dev);
+	} else if (config->type == PHYLINK_DEV) {
+		pl->dev = config->dev;
 	} else {
 		kfree(pl);
 		return ERR_PTR(-EINVAL);
@@ -910,7 +923,8 @@ void phylink_start(struct phylink *pl)
 		    phy_modes(pl->link_config.interface));
 
 	/* Always set the carrier off */
-	netif_carrier_off(pl->netdev);
+	if (pl->netdev)
+		netif_carrier_off(pl->netdev);
 
 	/* Apply the link configuration to the MAC when starting. This allows
 	 * a fixed-link to start with the correct parameters, and also
@@ -1255,7 +1269,8 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 		switch (pl->link_an_mode) {
 		case MLO_AN_PHY:
 			/* Silently mark the carrier down, and then trigger a resolve */
-			netif_carrier_off(pl->netdev);
+			if (pl->netdev)
+				netif_carrier_off(pl->netdev);
 			phylink_run_resolve(pl);
 			break;
 
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 67f35f07ac4b..0f6f65bb9d44 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -56,6 +56,7 @@ struct phylink_link_state {
 
 enum phylink_op_type {
 	PHYLINK_NETDEV = 0,
+	PHYLINK_DEV,
 };
 
 /**
-- 
2.21.0

[PATCH 08/11] net: phylink: Add phylink_{printk,err,warn,info,dbg} macros

[Ioana Ciornei]

With the latest addition to the PHYLINK infrastructure, we are faced
with a decision on when to print necessary info using the struct
net_device and when with the struct device.

Add a series of macros that encapsulate this decision and replace all
uses of netdev_err&co with phylink_err.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/phy/phylink.c | 137 +++++++++++++++++++++-----------------
 1 file changed, 77 insertions(+), 60 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5f6120f3fa3f..68d0a89c52be 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -68,6 +68,23 @@ struct phylink {
 	struct sfp_bus *sfp_bus;
 };
 
+#define phylink_printk(level, pl, fmt, ...) \
+	do { \
+		if ((pl)->config->type == PHYLINK_NETDEV) \
+			netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
+		else if ((pl)->config->type == PHYLINK_DEV) \
+			dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
+	} while (0)
+
+#define phylink_err(pl, fmt, ...) \
+	phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
+#define phylink_warn(pl, fmt, ...) \
+	phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
+#define phylink_info(pl, fmt, ...) \
+	phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
+#define phylink_dbg(pl, fmt, ...) \
+	phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
+
 /**
  * phylink_set_port_modes() - set the port type modes in the ethtool mask
  * @mask: ethtool link mode mask
@@ -164,7 +181,7 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 		ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
 						     NULL, 0);
 		if (ret != ARRAY_SIZE(prop)) {
-			netdev_err(pl->netdev, "broken fixed-link?\n");
+			phylink_err(pl, "broken fixed-link?\n");
 			return -EINVAL;
 		}
 
@@ -183,8 +200,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 
 	if (pl->link_config.speed > SPEED_1000 &&
 	    pl->link_config.duplex != DUPLEX_FULL)
-		netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n",
-			    pl->link_config.speed);
+		phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
+			     pl->link_config.speed);
 
 	bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
 	linkmode_copy(pl->link_config.advertising, pl->supported);
@@ -197,9 +214,9 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 	if (s) {
 		__set_bit(s->bit, pl->supported);
 	} else {
-		netdev_warn(pl->netdev, "fixed link %s duplex %dMbps not recognised\n",
-			    pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
-			    pl->link_config.speed);
+		phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
+			     pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
+			     pl->link_config.speed);
 	}
 
 	linkmode_and(pl->link_config.advertising, pl->link_config.advertising,
@@ -224,8 +241,8 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 	if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
 	    strcmp(managed, "in-band-status") == 0) {
 		if (pl->link_an_mode == MLO_AN_FIXED) {
-			netdev_err(pl->netdev,
-				   "can't use both fixed-link and in-band-status\n");
+			phylink_err(pl,
+				    "can't use both fixed-link and in-band-status\n");
 			return -EINVAL;
 		}
 
@@ -272,17 +289,17 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			break;
 
 		default:
-			netdev_err(pl->netdev,
-				   "incorrect link mode %s for in-band status\n",
-				   phy_modes(pl->link_config.interface));
+			phylink_err(pl,
+				    "incorrect link mode %s for in-band status\n",
+				    phy_modes(pl->link_config.interface));
 			return -EINVAL;
 		}
 
 		linkmode_copy(pl->link_config.advertising, pl->supported);
 
 		if (phylink_validate(pl, pl->supported, &pl->link_config)) {
-			netdev_err(pl->netdev,
-				   "failed to validate link configuration for in-band status\n");
+			phylink_err(pl,
+				    "failed to validate link configuration for in-band status\n");
 			return -EINVAL;
 		}
 	}
@@ -293,14 +310,14 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 static void phylink_mac_config(struct phylink *pl,
 			       const struct phylink_link_state *state)
 {
-	netdev_dbg(pl->netdev,
-		   "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
-		   __func__, phylink_an_mode_str(pl->link_an_mode),
-		   phy_modes(state->interface),
-		   phy_speed_to_str(state->speed),
-		   phy_duplex_to_str(state->duplex),
-		   __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
-		   state->pause, state->link, state->an_enabled);
+	phylink_dbg(pl,
+		    "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+		    __func__, phylink_an_mode_str(pl->link_an_mode),
+		    phy_modes(state->interface),
+		    phy_speed_to_str(state->speed),
+		    phy_duplex_to_str(state->duplex),
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
+		    state->pause, state->link, state->an_enabled);
 
 	pl->ops->mac_config(pl->config, pl->link_an_mode, state);
 }
@@ -409,11 +426,11 @@ static void phylink_mac_link_up(struct phylink *pl,
 	if (ndev)
 		netif_carrier_on(ndev);
 
-	netdev_info(ndev,
-		    "Link is Up - %s/%s - flow control %s\n",
-		    phy_speed_to_str(link_state.speed),
-		    phy_duplex_to_str(link_state.duplex),
-		    phylink_pause_to_str(link_state.pause));
+	phylink_info(pl,
+		     "Link is Up - %s/%s - flow control %s\n",
+		     phy_speed_to_str(link_state.speed),
+		     phy_duplex_to_str(link_state.duplex),
+		     phylink_pause_to_str(link_state.pause));
 }
 
 static void phylink_mac_link_down(struct phylink *pl)
@@ -424,7 +441,7 @@ static void phylink_mac_link_down(struct phylink *pl)
 		netif_carrier_off(ndev);
 	pl->ops->mac_link_down(pl->config, pl->link_an_mode,
 			       pl->phy_state.interface);
-	netdev_info(ndev, "Link is Down\n");
+	phylink_info(pl, "Link is Down\n");
 }
 
 static void phylink_resolve(struct work_struct *w)
@@ -537,8 +554,8 @@ static int phylink_register_sfp(struct phylink *pl,
 		if (ret == -ENOENT)
 			return 0;
 
-		netdev_err(pl->netdev, "unable to parse \"sfp\" node: %d\n",
-			   ret);
+		phylink_err(pl, "unable to parse \"sfp\" node: %d\n",
+			    ret);
 		return ret;
 	}
 
@@ -670,10 +687,10 @@ static void phylink_phy_change(struct phy_device *phydev, bool up,
 
 	phylink_run_resolve(pl);
 
-	netdev_dbg(pl->netdev, "phy link %s %s/%s/%s\n", up ? "up" : "down",
-		   phy_modes(phydev->interface),
-		   phy_speed_to_str(phydev->speed),
-		   phy_duplex_to_str(phydev->duplex));
+	phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
+		    phy_modes(phydev->interface),
+		    phy_speed_to_str(phydev->speed),
+		    phy_duplex_to_str(phydev->duplex));
 }
 
 static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
@@ -706,9 +723,9 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	phy->phylink = pl;
 	phy->phy_link_change = phylink_phy_change;
 
-	netdev_info(pl->netdev,
-		    "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
-		    phy->drv->name);
+	phylink_info(pl,
+		     "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
+		     phy->drv->name);
 
 	mutex_lock(&phy->lock);
 	mutex_lock(&pl->state_mutex);
@@ -721,10 +738,10 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	mutex_unlock(&pl->state_mutex);
 	mutex_unlock(&phy->lock);
 
-	netdev_dbg(pl->netdev,
-		   "phy: setting supported %*pb advertising %*pb\n",
-		   __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
+	phylink_dbg(pl,
+		    "phy: setting supported %*pb advertising %*pb\n",
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
 
 	if (phy_interrupt_is_valid(phy))
 		phy_request_interrupt(phy);
@@ -902,7 +919,7 @@ void phylink_mac_change(struct phylink *pl, bool up)
 	if (!up)
 		pl->mac_link_dropped = true;
 	phylink_run_resolve(pl);
-	netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
+	phylink_dbg(pl, "mac link %s\n", up ? "up" : "down");
 }
 EXPORT_SYMBOL_GPL(phylink_mac_change);
 
@@ -918,9 +935,9 @@ void phylink_start(struct phylink *pl)
 {
 	ASSERT_RTNL();
 
-	netdev_info(pl->netdev, "configuring for %s/%s link mode\n",
-		    phylink_an_mode_str(pl->link_an_mode),
-		    phy_modes(pl->link_config.interface));
+	phylink_info(pl, "configuring for %s/%s link mode\n",
+		     phylink_an_mode_str(pl->link_an_mode),
+		     phy_modes(pl->link_config.interface));
 
 	/* Always set the carrier off */
 	if (pl->netdev)
@@ -1631,33 +1648,33 @@ static int phylink_sfp_module_insert(void *upstream,
 	/* Ignore errors if we're expecting a PHY to attach later */
 	ret = phylink_validate(pl, support, &config);
 	if (ret) {
-		netdev_err(pl->netdev, "validation with support %*pb failed: %d\n",
-			   __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+		phylink_err(pl, "validation with support %*pb failed: %d\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
 		return ret;
 	}
 
 	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
 	if (iface == PHY_INTERFACE_MODE_NA) {
-		netdev_err(pl->netdev,
-			   "selection of interface failed, advertisement %*pb\n",
-			   __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
+		phylink_err(pl,
+			    "selection of interface failed, advertisement %*pb\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
 		return -EINVAL;
 	}
 
 	config.interface = iface;
 	ret = phylink_validate(pl, support, &config);
 	if (ret) {
-		netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
-			   phylink_an_mode_str(MLO_AN_INBAND),
-			   phy_modes(config.interface),
-			   __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+		phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
+			    phylink_an_mode_str(MLO_AN_INBAND),
+			    phy_modes(config.interface),
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
 		return ret;
 	}
 
-	netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
-		   phylink_an_mode_str(MLO_AN_INBAND),
-		   phy_modes(config.interface),
-		   __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
+		    phylink_an_mode_str(MLO_AN_INBAND),
+		    phy_modes(config.interface),
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
 
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
 		return -EINVAL;
@@ -1676,9 +1693,9 @@ static int phylink_sfp_module_insert(void *upstream,
 
 		changed = true;
 
-		netdev_info(pl->netdev, "switched to %s/%s link mode\n",
-			    phylink_an_mode_str(MLO_AN_INBAND),
-			    phy_modes(config.interface));
+		phylink_info(pl, "switched to %s/%s link mode\n",
+			     phylink_an_mode_str(MLO_AN_INBAND),
+			     phy_modes(config.interface));
 	}
 
 	pl->link_port = port;
-- 
2.21.0

[PATCH 09/11] net: dsa: Move the phylink driver calls into port.c

[Ioana Ciornei]

In order to have a common handling of PHYLINK for the slave and non-user
ports, the DSA core glue logic (between PHYLINK and the driver) must use
an API that does not rely on a struct net_device.

These will also be called by the CPU-port-handling code in a further
patch.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
---
 net/dsa/dsa_priv.h |  17 ++++++++
 net/dsa/port.c     | 100 +++++++++++++++++++++++++++++++++++++++++++++
 net/dsa/slave.c    |  96 +------------------------------------------
 3 files changed, 118 insertions(+), 95 deletions(-)

diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 8f1222324646..418490bda3a4 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -163,6 +163,23 @@ int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 flags);
 int dsa_port_vid_del(struct dsa_port *dp, u16 vid);
 int dsa_port_link_register_of(struct dsa_port *dp);
 void dsa_port_link_unregister_of(struct dsa_port *dp);
+void dsa_port_phylink_validate(struct phylink_config *config,
+			       unsigned long *supported,
+			       struct phylink_link_state *state);
+int dsa_port_phylink_mac_link_state(struct phylink_config *config,
+				    struct phylink_link_state *state);
+void dsa_port_phylink_mac_config(struct phylink_config *config,
+				 unsigned int mode,
+				 const struct phylink_link_state *state);
+void dsa_port_phylink_mac_an_restart(struct phylink_config *config);
+void dsa_port_phylink_mac_link_down(struct phylink_config *config,
+				    unsigned int mode,
+				    phy_interface_t interface);
+void dsa_port_phylink_mac_link_up(struct phylink_config *config,
+				  unsigned int mode,
+				  phy_interface_t interface,
+				  struct phy_device *phydev);
+extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
 
 /* slave.c */
 extern const struct dsa_device_ops notag_netdev_ops;
diff --git a/net/dsa/port.c b/net/dsa/port.c
index ed8ba9daa3ba..0051f5006248 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -422,6 +422,106 @@ static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp)
 	return phydev;
 }
 
+void dsa_port_phylink_validate(struct phylink_config *config,
+			       unsigned long *supported,
+			       struct phylink_link_state *state)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->phylink_validate)
+		return;
+
+	ds->ops->phylink_validate(ds, dp->index, supported, state);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_validate);
+
+int dsa_port_phylink_mac_link_state(struct phylink_config *config,
+				    struct phylink_link_state *state)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+
+	/* Only called for SGMII and 802.3z */
+	if (!ds->ops->phylink_mac_link_state)
+		return -EOPNOTSUPP;
+
+	return ds->ops->phylink_mac_link_state(ds, dp->index, state);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_state);
+
+void dsa_port_phylink_mac_config(struct phylink_config *config,
+				 unsigned int mode,
+				 const struct phylink_link_state *state)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->phylink_mac_config)
+		return;
+
+	ds->ops->phylink_mac_config(ds, dp->index, mode, state);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_config);
+
+void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->phylink_mac_an_restart)
+		return;
+
+	ds->ops->phylink_mac_an_restart(ds, dp->index);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_an_restart);
+
+void dsa_port_phylink_mac_link_down(struct phylink_config *config,
+				    unsigned int mode,
+				    phy_interface_t interface)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct net_device *dev = dp->slave;
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->phylink_mac_link_down) {
+		if (ds->ops->adjust_link && dev->phydev)
+			ds->ops->adjust_link(ds, dp->index, dev->phydev);
+		return;
+	}
+
+	ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_down);
+
+void dsa_port_phylink_mac_link_up(struct phylink_config *config,
+				  unsigned int mode,
+				  phy_interface_t interface,
+				  struct phy_device *phydev)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct net_device *dev = dp->slave;
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->phylink_mac_link_up) {
+		if (ds->ops->adjust_link && dev->phydev)
+			ds->ops->adjust_link(ds, dp->index, dev->phydev);
+		return;
+	}
+
+	ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev);
+}
+EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_up);
+
+const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
+	.validate = dsa_port_phylink_validate,
+	.mac_link_state = dsa_port_phylink_mac_link_state,
+	.mac_config = dsa_port_phylink_mac_config,
+	.mac_an_restart = dsa_port_phylink_mac_an_restart,
+	.mac_link_down = dsa_port_phylink_mac_link_down,
+	.mac_link_up = dsa_port_phylink_mac_link_up,
+};
+
 static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
 {
 	struct dsa_switch *ds = dp->ds;
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 48e017637d4f..1e2ae9d59b88 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1164,100 +1164,6 @@ static struct device_type dsa_type = {
 	.name	= "dsa",
 };
 
-static void dsa_slave_phylink_validate(struct phylink_config *config,
-				       unsigned long *supported,
-				       struct phylink_link_state *state)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct dsa_switch *ds = dp->ds;
-
-	if (!ds->ops->phylink_validate)
-		return;
-
-	ds->ops->phylink_validate(ds, dp->index, supported, state);
-}
-
-static int dsa_slave_phylink_mac_link_state(struct phylink_config *config,
-					    struct phylink_link_state *state)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct dsa_switch *ds = dp->ds;
-
-	/* Only called for SGMII and 802.3z */
-	if (!ds->ops->phylink_mac_link_state)
-		return -EOPNOTSUPP;
-
-	return ds->ops->phylink_mac_link_state(ds, dp->index, state);
-}
-
-static void dsa_slave_phylink_mac_config(struct phylink_config *config,
-					 unsigned int mode,
-					 const struct phylink_link_state *state)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct dsa_switch *ds = dp->ds;
-
-	if (!ds->ops->phylink_mac_config)
-		return;
-
-	ds->ops->phylink_mac_config(ds, dp->index, mode, state);
-}
-
-static void dsa_slave_phylink_mac_an_restart(struct phylink_config *config)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct dsa_switch *ds = dp->ds;
-
-	if (!ds->ops->phylink_mac_an_restart)
-		return;
-
-	ds->ops->phylink_mac_an_restart(ds, dp->index);
-}
-
-static void dsa_slave_phylink_mac_link_down(struct phylink_config *config,
-					    unsigned int mode,
-					    phy_interface_t interface)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct net_device *dev = dp->slave;
-	struct dsa_switch *ds = dp->ds;
-
-	if (!ds->ops->phylink_mac_link_down) {
-		if (ds->ops->adjust_link && dev->phydev)
-			ds->ops->adjust_link(ds, dp->index, dev->phydev);
-		return;
-	}
-
-	ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
-}
-
-static void dsa_slave_phylink_mac_link_up(struct phylink_config *config,
-					  unsigned int mode,
-					  phy_interface_t interface,
-					  struct phy_device *phydev)
-{
-	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct net_device *dev = dp->slave;
-	struct dsa_switch *ds = dp->ds;
-
-	if (!ds->ops->phylink_mac_link_up) {
-		if (ds->ops->adjust_link && dev->phydev)
-			ds->ops->adjust_link(ds, dp->index, dev->phydev);
-		return;
-	}
-
-	ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev);
-}
-
-static const struct phylink_mac_ops dsa_slave_phylink_mac_ops = {
-	.validate = dsa_slave_phylink_validate,
-	.mac_link_state = dsa_slave_phylink_mac_link_state,
-	.mac_config = dsa_slave_phylink_mac_config,
-	.mac_an_restart = dsa_slave_phylink_mac_an_restart,
-	.mac_link_down = dsa_slave_phylink_mac_link_down,
-	.mac_link_up = dsa_slave_phylink_mac_link_up,
-};
-
 void dsa_port_phylink_mac_change(struct dsa_switch *ds, int port, bool up)
 {
 	const struct dsa_port *dp = dsa_to_port(ds, port);
@@ -1309,7 +1215,7 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
 	dp->pl_config.type = PHYLINK_NETDEV;
 
 	dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode,
-				&dsa_slave_phylink_mac_ops);
+				&dsa_port_phylink_mac_ops);
 	if (IS_ERR(dp->pl)) {
 		netdev_err(slave_dev,
 			   "error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
-- 
2.21.0

[PATCH 10/11] net: dsa: Use PHYLINK for the CPU/DSA ports

[Ioana Ciornei]

For DSA switches that do not have an .adjust_link callback, aka those
who transitioned totally to the PHYLINK-compliant API, use PHYLINK to
drive the CPU/DSA ports.

The PHYLIB usage and .adjust_link are kept but deprecated, and users are
asked to transition from it.  The reason why we can't do anything for
them is because PHYLINK does not wrap the fixed-link state behind a
phydev object, so we cannot wrap .phylink_mac_config into .adjust_link
unless we fabricate a phy_device structure.

For these ports, the newly introduced PHYLINK_DEV operation type is
used and the dsa_switch device structure is passed to PHYLINK for
printing purposes.  The handling of the PHYLINK_NETDEV and PHYLINK_DEV
PHYLINK instances is common from the perspective of the driver.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 net/dsa/port.c | 69 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 63 insertions(+), 6 deletions(-)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 0051f5006248..30d5b08a5653 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -481,12 +481,15 @@ void dsa_port_phylink_mac_link_down(struct phylink_config *config,
 				    phy_interface_t interface)
 {
 	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct net_device *dev = dp->slave;
+	struct phy_device *phydev = NULL;
 	struct dsa_switch *ds = dp->ds;
 
+	if (dsa_is_user_port(ds, dp->index))
+		phydev = dp->slave->phydev;
+
 	if (!ds->ops->phylink_mac_link_down) {
-		if (ds->ops->adjust_link && dev->phydev)
-			ds->ops->adjust_link(ds, dp->index, dev->phydev);
+		if (ds->ops->adjust_link && phydev)
+			ds->ops->adjust_link(ds, dp->index, phydev);
 		return;
 	}
 
@@ -500,12 +503,11 @@ void dsa_port_phylink_mac_link_up(struct phylink_config *config,
 				  struct phy_device *phydev)
 {
 	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-	struct net_device *dev = dp->slave;
 	struct dsa_switch *ds = dp->ds;
 
 	if (!ds->ops->phylink_mac_link_up) {
-		if (ds->ops->adjust_link && dev->phydev)
-			ds->ops->adjust_link(ds, dp->index, dev->phydev);
+		if (ds->ops->adjust_link && phydev)
+			ds->ops->adjust_link(ds, dp->index, phydev);
 		return;
 	}
 
@@ -599,8 +601,53 @@ static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
 	return 0;
 }
 
+int dsa_port_phylink_register(struct dsa_port *dp)
+{
+	struct dsa_switch *ds = dp->ds;
+	struct device_node *port_dn = dp->dn;
+	int mode, err;
+
+	mode = of_get_phy_mode(port_dn);
+	if (mode < 0)
+		mode = PHY_INTERFACE_MODE_NA;
+
+	dp->pl_config.dev = ds->dev;
+	dp->pl_config.type = PHYLINK_DEV;
+
+	dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
+				mode, &dsa_port_phylink_mac_ops);
+	if (IS_ERR(dp->pl)) {
+		pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
+		return PTR_ERR(dp->pl);
+	}
+
+	err = phylink_of_phy_connect(dp->pl, port_dn, 0);
+	if (err) {
+		pr_err("could not attach to PHY: %d\n", err);
+		goto err_phy_connect;
+	}
+
+	rtnl_lock();
+	phylink_start(dp->pl);
+	rtnl_unlock();
+
+	return 0;
+
+err_phy_connect:
+	phylink_destroy(dp->pl);
+	return err;
+}
+
 int dsa_port_link_register_of(struct dsa_port *dp)
 {
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->adjust_link)
+		return dsa_port_phylink_register(dp);
+
+	dev_warn(ds->dev,
+		 "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
+
 	if (of_phy_is_fixed_link(dp->dn))
 		return dsa_port_fixed_link_register_of(dp);
 	else
@@ -609,6 +656,16 @@ int dsa_port_link_register_of(struct dsa_port *dp)
 
 void dsa_port_link_unregister_of(struct dsa_port *dp)
 {
+	struct dsa_switch *ds = dp->ds;
+
+	if (!ds->ops->adjust_link) {
+		rtnl_lock();
+		phylink_disconnect_phy(dp->pl);
+		rtnl_unlock();
+		phylink_destroy(dp->pl);
+		return;
+	}
+
 	if (of_phy_is_fixed_link(dp->dn))
 		of_phy_deregister_fixed_link(dp->dn);
 	else
-- 
2.21.0

[PATCH 11/11] net: dsa: sja1105: Fix broken fixed-link interfaces on user ports

[Ioana Ciornei]

From: Vladimir Oltean <olteanv@gmail.com>

PHYLIB and PHYLINK handle fixed-link interfaces differently. PHYLIB
wraps them in a software PHY ("pseudo fixed link") phydev construct such
that .adjust_link driver callbacks see an unified API. Whereas PHYLINK
simply creates a phylink_link_state structure and passes it to
.mac_config.

At the time the driver was introduced, DSA was using PHYLIB for the
CPU/cascade ports (the ones with no net devices) and PHYLINK for
everything else.

As explained below:

commit aab9c4067d2389d0adfc9c53806437df7b0fe3d5
Author: Florian Fainelli <f.fainelli@gmail.com>
Date:   Thu May 10 13:17:36 2018 -0700

  net: dsa: Plug in PHYLINK support

  Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2)
  will need to implement phylink_mac_ops from now on to preserve
  functionality, since PHYLINK *does not* create a phy_device instance
  for fixed links.

In the above patch, DSA guards the .phylink_mac_config callback against
a NULL phydev pointer.  Therefore, .adjust_link is not called in case of
a fixed-link user port.

This patch fixes the situation by converting the driver from using
.adjust_link to .phylink_mac_config.  This can be done now in a unified
fashion for both slave and CPU/cascade ports because DSA now uses
PHYLINK for all ports.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 0663b78a2f6c..cfdefd9f1905 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -734,15 +734,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 	return sja1105_clocking_setup_port(priv, port);
 }
 
-static void sja1105_adjust_link(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
+static void sja1105_mac_config(struct dsa_switch *ds, int port,
+			       unsigned int link_an_mode,
+			       const struct phylink_link_state *state)
 {
 	struct sja1105_private *priv = ds->priv;
 
-	if (!phydev->link)
+	if (!state->link)
 		sja1105_adjust_port_config(priv, port, 0, false);
 	else
-		sja1105_adjust_port_config(priv, port, phydev->speed, true);
+		sja1105_adjust_port_config(priv, port, state->speed, true);
 }
 
 static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
@@ -1515,9 +1516,9 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
 static const struct dsa_switch_ops sja1105_switch_ops = {
 	.get_tag_protocol	= sja1105_get_tag_protocol,
 	.setup			= sja1105_setup,
-	.adjust_link		= sja1105_adjust_link,
 	.set_ageing_time	= sja1105_set_ageing_time,
 	.phylink_validate	= sja1105_phylink_validate,
+	.phylink_mac_config	= sja1105_mac_config,
 	.get_strings		= sja1105_get_strings,
 	.get_ethtool_stats	= sja1105_get_ethtool_stats,
 	.get_sset_count		= sja1105_get_sset_count,
-- 
2.21.0

Re: [PATCH 03/11] net: phy: Check against net_device being NULL

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2087 bytes --]

Hi Ioana,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]
[also build test WARNING on v5.2-rc2 next-20190524]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Ioana-Ciornei/Decoupling-PHYLINK-from-struct-net_device/20190528-061507
config: x86_64-randconfig-x004201921-201921 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/net//phy/phy_device.c: In function 'phy_connect_direct':
>> drivers/net//phy/phy_device.c:952:10: warning: return makes integer from pointer without a cast [-Wint-conversion]
      return ERR_PTR(-EINVAL);
             ^~~~~~~~~~~~~~~~

vim +952 drivers/net//phy/phy_device.c

   937	
   938	/**
   939	 * phy_connect_direct - connect an ethernet device to a specific phy_device
   940	 * @dev: the network device to connect
   941	 * @phydev: the pointer to the phy device
   942	 * @handler: callback function for state change notifications
   943	 * @interface: PHY device's interface
   944	 */
   945	int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
   946			       void (*handler)(struct net_device *),
   947			       phy_interface_t interface)
   948	{
   949		int rc;
   950	
   951		if (!dev)
 > 952			return ERR_PTR(-EINVAL);
   953	
   954		rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
   955		if (rc)
   956			return rc;
   957	
   958		phy_prepare_link(phydev, handler);
   959		if (phy_interrupt_is_valid(phydev))
   960			phy_request_interrupt(phydev);
   961	
   962		return 0;
   963	}
   964	EXPORT_SYMBOL(phy_connect_direct);
   965	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28306 bytes --]

Re: [PATCH 01/11] net: phy: Add phy_sysfs_create_links helper function

[Fabio Estevam]

Hi Ioana,

On Mon, May 27, 2019 at 6:47 PM Ioana Ciornei <ioana.ciornei@nxp.com> wrote:
>
> From: Vladimir Oltean <olteanv@gmail.com>
>
> This is a cosmetic patch that wraps the operation of creating sysfs
> links between the netdev->phydev and the phydev->attached_dev.
>
> This is needed to keep the indentation level in check in a follow-up
> patch where this function will be guarded against the existence of a
> phydev->attached_dev.
>
> Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

As you are transmitting the patch authored by other person, you need
to provide your Signed-off-by tag.

Re: [PATCH 06/11] net: phylink: Add struct phylink_config to PHYLINK API

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> The phylink_config structure will encapsulate a pointer to a struct
> device and the operation type requested for this instance of PHYLINK.
> This patch does not make any functional changes, it just transitions the
> PHYLINK internals and all its users to the new API.
> 
> A pointer to a phylink_config structure will be passed to
> phylink_create() instead of the net_device directly. Also, the same
> phylink_config pointer will be passed back to all phylink_mac_ops
> callbacks instead of the net_device. Using this mechanism, a PHYLINK
> user can get the original net_device using a structure such as
> 'to_net_dev(config->dev)' or directly the structure containing the
> phylink_config using a container_of call.
> 
> At the moment, only the PHYLINK_NETDEV is defined as a valid operation
> type for PHYLINK. In this mode, a valid reference to a struct device
> linked to the original net_device should be passed to PHYLINK through
> the phylink_config structure.
> 
> This API changes is mainly driven by the necessity of adding a new
> operation type in PHYLINK that disconnects the phy_device from the
> net_device and also works when the net_device is lacking.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

The PHYLINK and DSA portions look good to me, and this is a lot nicer
than the notifier, thanks for coming up with that scheme:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 08/11] net: phylink: Add phylink_{printk,err,warn,info,dbg} macros

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> With the latest addition to the PHYLINK infrastructure, we are faced
> with a decision on when to print necessary info using the struct
> net_device and when with the struct device.
> 
> Add a series of macros that encapsulate this decision and replace all
> uses of netdev_err&co with phylink_err.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 10/11] net: dsa: Use PHYLINK for the CPU/DSA ports

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> For DSA switches that do not have an .adjust_link callback, aka those
> who transitioned totally to the PHYLINK-compliant API, use PHYLINK to
> drive the CPU/DSA ports.
> 
> The PHYLIB usage and .adjust_link are kept but deprecated, and users are
> asked to transition from it.  The reason why we can't do anything for
> them is because PHYLINK does not wrap the fixed-link state behind a
> phydev object, so we cannot wrap .phylink_mac_config into .adjust_link
> unless we fabricate a phy_device structure.
> 
> For these ports, the newly introduced PHYLINK_DEV operation type is
> used and the dsa_switch device structure is passed to PHYLINK for
> printing purposes.  The handling of the PHYLINK_NETDEV and PHYLINK_DEV
> PHYLINK instances is common from the perspective of the driver.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 04/11] net: phy: Add phy_standalone sysfs entry

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> Export a phy_standalone device attribute that is meant to give the
> indication that this PHY lacks an attached_dev and its corresponding
> sysfs link. The attribute will be created only when the
> phy_attach_direct() function will be called with a NULL net_device.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>

If you update Documentation/ABI/testing/sysfs-class-net-phydev, this is:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

I will take care of removing sysfs-bus-mdio which duplicates that
information.
-- 
Florian

Re: [PATCH 07/11] net: phylink: Add PHYLINK_DEV operation type

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work
> without an attached net_device. For printing usecases, instead, a struct
> device * should be passed to PHYLINK using the phylink_config structure.
> 
> Also, netif_carrier_* calls ar guarded by the presence of a valid
> net_device. When using the PHYLINK_DEV operation type, we cannot check
> link status using the netif_carrier_ok() API so instead, keep an
> internal state of the MAC and call mac_link_{down,up} only when the link
> changed.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

Should not this patch be re-ordered to be after patch #8? Other than that:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 09/11] net: dsa: Move the phylink driver calls into port.c

[Florian Fainelli]

On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> In order to have a common handling of PHYLINK for the slave and non-user
> ports, the DSA core glue logic (between PHYLINK and the driver) must use
> an API that does not rely on a struct net_device.
> 
> These will also be called by the CPU-port-handling code in a further
> patch.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Suggested-by: Vladimir Oltean <olteanv@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 03/11] net: phy: Check against net_device being NULL

[kbuild test robot]

Hi Ioana,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]
[also build test WARNING on v5.2-rc2 next-20190524]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Ioana-Ciornei/Decoupling-PHYLINK-from-struct-net_device/20190528-061507
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.1-rc1-7-g2b96cd8-dirty
        make ARCH=x86_64 allmodconfig
        make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)

>> drivers/net/phy/phy_device.c:952:31: sparse: sparse: incorrect type in return expression (different base types) @@    expected int @@    got voiint @@
>> drivers/net/phy/phy_device.c:952:31: sparse:    expected int
>> drivers/net/phy/phy_device.c:952:31: sparse:    got void *

vim +952 drivers/net/phy/phy_device.c

   937	
   938	/**
   939	 * phy_connect_direct - connect an ethernet device to a specific phy_device
   940	 * @dev: the network device to connect
   941	 * @phydev: the pointer to the phy device
   942	 * @handler: callback function for state change notifications
   943	 * @interface: PHY device's interface
   944	 */
   945	int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
   946			       void (*handler)(struct net_device *),
   947			       phy_interface_t interface)
   948	{
   949		int rc;
   950	
   951		if (!dev)
 > 952			return ERR_PTR(-EINVAL);
   953	
   954		rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
   955		if (rc)
   956			return rc;
   957	
   958		phy_prepare_link(phydev, handler);
   959		if (phy_interrupt_is_valid(phydev))
   960			phy_request_interrupt(phydev);
   961	
   962		return 0;
   963	}
   964	EXPORT_SYMBOL(phy_connect_direct);
   965	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH 10/11] net: dsa: Use PHYLINK for the CPU/DSA ports

[kbuild test robot]

Hi Ioana,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]
[also build test WARNING on v5.2-rc2 next-20190524]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Ioana-Ciornei/Decoupling-PHYLINK-from-struct-net_device/20190528-061507
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.1-rc1-7-g2b96cd8-dirty
        make ARCH=x86_64 allmodconfig
        make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)

>> net/dsa/port.c:604:5: sparse: sparse: symbol 'dsa_port_phylink_register' was not declared. Should it be static?

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[RFC PATCH] net: dsa: dsa_port_phylink_register() can be static

[kbuild test robot]

Fixes: 9dd6d07682b1 ("net: dsa: Use PHYLINK for the CPU/DSA ports")
Signed-off-by: kbuild test robot <lkp@intel.com>
---
 port.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 30d5b08..d74bc9d 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -601,7 +601,7 @@ static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
 	return 0;
 }
 
-int dsa_port_phylink_register(struct dsa_port *dp)
+static int dsa_port_phylink_register(struct dsa_port *dp)
 {
 	struct dsa_switch *ds = dp->ds;
 	struct device_node *port_dn = dp->dn;

RE: [PATCH 01/11] net: phy: Add phy_sysfs_create_links helper function

[Ioana Ciornei]

> Subject: Re: [PATCH 01/11] net: phy: Add phy_sysfs_create_links helper function
> 
> Hi Ioana,
> 
> On Mon, May 27, 2019 at 6:47 PM Ioana Ciornei <ioana.ciornei@nxp.com>
> wrote:
> >
> > From: Vladimir Oltean <olteanv@gmail.com>
> >
> > This is a cosmetic patch that wraps the operation of creating sysfs
> > links between the netdev->phydev and the phydev->attached_dev.
> >
> > This is needed to keep the indentation level in check in a follow-up
> > patch where this function will be guarded against the existence of a
> > phydev->attached_dev.
> >
> > Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> 
> As you are transmitting the patch authored by other person, you need to provide
> your Signed-off-by tag.

Sorry for the mishap. I forgot to add it to this patch. Thanks for pointing it out.

--
Ioana

Re: [PATCH 03/11] net: phy: Check against net_device being NULL

[Andrew Lunn]

On Tue, May 28, 2019 at 12:21:59AM +0300, Ioana Ciornei wrote:
> In general, we don't want MAC drivers calling phy_attach_direct with the
> net_device being NULL. Add checks against this in all the functions
> calling it: phy_attach() and phy_connect_direct().
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH 03/11] net: phy: Check against net_device being NULL

[Andrew Lunn]

On Tue, May 28, 2019 at 12:21:59AM +0300, Ioana Ciornei wrote:
> In general, we don't want MAC drivers calling phy_attach_direct with the
> net_device being NULL. Add checks against this in all the functions
> calling it: phy_attach() and phy_connect_direct().
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>

I should actually say, once you fix the sparse warnings, you can add:

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

RE: [PATCH 07/11] net: phylink: Add PHYLINK_DEV operation type

[Ioana Ciornei]

> Subject: Re: [PATCH 07/11] net: phylink: Add PHYLINK_DEV operation type
> 
> 
> 
> On 5/27/2019 2:22 PM, Ioana Ciornei wrote:
> > In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work
> > without an attached net_device. For printing usecases, instead, a
> > struct device * should be passed to PHYLINK using the phylink_config
> structure.
> >
> > Also, netif_carrier_* calls ar guarded by the presence of a valid
> > net_device. When using the PHYLINK_DEV operation type, we cannot check
> > link status using the netif_carrier_ok() API so instead, keep an
> > internal state of the MAC and call mac_link_{down,up} only when the
> > link changed.
> >
> > Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> > Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
> 
> Should not this patch be re-ordered to be after patch #8? Other than that:
> 

Not necessarily.
Even without patch #8 ("net: phylink: Add phylink_{printk,err,warn,info,dbg} macros") everything will function properly with the mention that in case of PHYLINK_DEV a NULL net_device will get printed.

I chose to add the phylink_printk after this patch because now we have the whole picture.

--
Ioana

> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> --
> Florian

[net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3733 bytes --]

FYI, we noticed the following commit (built with gcc-6):

commit: 9dd6d07682b10a55d1f49d495b85f7b945ff75ca ("[PATCH 10/11] net: dsa: Use PHYLINK for the CPU/DSA ports")
url: https://github.com/0day-ci/linux/commits/Ioana-Ciornei/Decoupling-PHYLINK-from-struct-net_device/20190528-061507


in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 2G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+------------------------------------------+------------+------------+
|                                          | 3a2573f868 | 9dd6d07682 |
+------------------------------------------+------------+------------+
| boot_successes                           | 4          | 0          |
| boot_failures                            | 0          | 6          |
| kernel_BUG_at_drivers/net/phy/mdio_bus.c | 0          | 6          |
| invalid_opcode:#[##]                     | 0          | 6          |
| EIP:mdiobus_free                         | 0          | 6          |
| Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
+------------------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <rong.a.chen@intel.com>


[   39.031781] kernel BUG at drivers/net/phy/mdio_bus.c:503!
[   39.049792] invalid opcode: 0000 [#1] PREEMPT
[   39.058345] CPU: 0 PID: 152 Comm: kworker/0:2 Tainted: G                T 5.2.0-rc1-00321-g9dd6d07 #1
[   39.076106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   39.091893] Workqueue: events deferred_probe_work_func
[   39.101903] EIP: mdiobus_free+0x21/0x39
[   39.109323] Code: 18 5f ed ff 5b 5e 5f 5d c3 55 89 e5 52 89 45 fc 8b 45 fc 8b 90 9c 00 00 00 83 fa 01 75 07 e8 9b fa 99 ff eb 1b 83 fa 03 74 02 <0f> 0b c7 80 9c 00 00 00 04 00 00 00 05 a0 00 00 00 e8 94 58 ed ff
[   39.144715] EAX: eff3e008 EBX: eff3a020 ECX: c23a9de9 EDX: 00000002
[   39.156773] ESI: f0403560 EDI: efffbe24 EBP: efffbdf8 ESP: efffbdf4
[   39.168825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010297
[   39.182048] CR0: 80050033 CR2: 00000000 CR3: 02781000 CR4: 000006b0
[   39.194136] Call Trace:
[   39.198932]  _devm_mdiobus_free+0xd/0x10
[   39.206573]  release_nodes+0x194/0x1ad
[   39.213804]  devres_release_all+0x37/0x3d
[   39.221709]  really_probe+0x2b4/0x3a3
[   39.228808]  driver_probe_device+0x110/0x14b
[   39.237206]  __device_attach_driver+0x9d/0xa5
[   39.245622]  bus_for_each_drv+0x65/0x77
[   39.253081]  __device_attach+0x8f/0x104
[   39.260507]  ? driver_allows_async_probing+0x26/0x26
[   39.270161]  device_initial_probe+0x14/0x16
[   39.278223]  bus_probe_device+0x22/0x64
[   39.285645]  deferred_probe_work_func+0x7b/0xa1
[   39.294428]  process_one_work+0x1bc/0x2eb
[   39.302332]  ? process_one_work+0x164/0x2eb
[   39.310539]  process_scheduled_works+0x1e/0x24
[   39.319218]  worker_thread+0x1cb/0x268
[   39.326604]  kthread+0xeb/0xf0
[   39.332607]  ? process_scheduled_works+0x24/0x24
[   39.341641]  ? __kthread_create_on_node+0x128/0x128
[   39.350985]  ret_from_fork+0x1e/0x28
[   39.369743] ---[ end trace 2d9c21baf7b99d11 ]---


To reproduce:

        # build kernel
	cd linux
	cp config-5.2.0-rc1-00321-g9dd6d07 .config
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 olddefconfig
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 prepare
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 modules_prepare
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 SHELL=/bin/bash
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 bzImage


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email



Thanks,
Rong Chen


[-- Attachment #2: config-5.2.0-rc1-00321-g9dd6d07 --]
[-- Type: text/plain, Size: 138368 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.2.0-rc1 Kernel Configuration
#

#
# Compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60400
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_QUARK is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_RDC321X=y
CONFIG_X86_32_IRIS=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_PVH=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring

# CONFIG_X86_LEGACY_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_UMIP is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# end of Processor type and features

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle

# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
CONFIG_GEOS=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_GENERIC_GUP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_4_7=y
# end of GCOV-based kernel profiling

CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y

#
# GCC plugins
#
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# CONFIG_GCC_PLUGIN_RANDSTRUCT_PERFORMANCE is not set
# end of GCC plugins
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=y
# CONFIG_TLS_DEVICE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_BPFILTER=y
# CONFIG_BPFILTER_UMH is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
# CONFIG_TIPC_DIAG is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_8021Q=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ_COMMON=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_KSZ9477=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_LAN9303=y
# CONFIG_NET_DSA_TAG_SJA1105 is not set
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
# CONFIG_BATMAN_ADV_BLA is not set
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUGFS=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_SYSFS=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
# CONFIG_MPLS_IPTUNNEL is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
CONFIG_CGROUP_NET_PRIO=y
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
CONFIG_YAM=y
# end of AX.25 network device drivers

# CONFIG_CAN is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
# CONFIG_BT_WILINK is not set
CONFIG_BT_MTKSDIO=y
# CONFIG_BT_MTKUART is not set
CONFIG_BT_HCIRSI=y
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_MLME_DEBUG is not set
# CONFIG_MAC80211_STA_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_OCB_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_PS_DEBUG is not set
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
# CONFIG_MAC80211_MESH_CSA_DEBUG is not set
# CONFIG_MAC80211_MESH_PS_DEBUG is not set
# CONFIG_MAC80211_TDLS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_MRVL_UART is not set
# CONFIG_NFC_ST_NCI_I2C is not set
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support

#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# Partition parsers
#
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set

#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_CS553X=y
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_PLATFORM is not set

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_VHOST_RING=y
# end of Intel MIC & related support

CONFIG_ECHO=y
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_DWC=y
# CONFIG_SATA_DWC_OLD_DMA is not set
CONFIG_SATA_DWC_DEBUG=y
CONFIG_SATA_DWC_VDEBUG=y
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
CONFIG_CAIF_VIRTIO=y

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_I40E is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_SFP=y
# CONFIG_AMD_PHY is not set
CONFIG_AQUANTIA_PHY=y
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CICADA_PHY=y
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_TERANETICS_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
# CONFIG_PPPOE is not set
# CONFIG_PPTP is not set
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_DEBUG=y
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
CONFIG_WCN36XX=y
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=y
# CONFIG_P54_PCI is not set
CONFIG_P54_LEDS=y
# CONFIG_PRISM54 is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_COEX=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
# CONFIG_WL1251_SDIO is not set
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SDIO=y
# CONFIG_WILINK_PLATFORM_DATA is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=y
CONFIG_VIRT_WIFI=y

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_NETDEVSIM=y
# CONFIG_NET_FAILOVER is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_DUMMYLL=y
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
CONFIG_NVM=y
CONFIG_NVM_PBLK=y
# CONFIG_NVM_PBLK_DEBUG is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_BYD is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
# CONFIG_MOUSE_PS2_CYPRESS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_ELANTECH_SMBUS is not set
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_MSM_VIBRATOR=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX77693_HAPTIC=y
# CONFIG_INPUT_MAX8925_ONKEY is not set
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_GP2A is not set
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_REGULATOR_HAPTIC=y
# CONFIG_INPUT_RETU_PWRBUTTON is not set
CONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=y
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
# CONFIG_INPUT_DRV2665_HAPTICS is not set
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_NULL_TTY=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
# CONFIG_LDISC_AUTOLOAD is not set
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
# end of Serial drivers

CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices

CONFIG_RANDOM_TRUST_CPU=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_LTC4306=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_SCx200_ACB is not set
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_MCP23S08=y
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=y
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_MADERA is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_UCB1400=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

# CONFIG_GPIO_MOCKUP is not set
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=y
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_CHARGER_DA9150 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_AXP20X_POWER=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83773G=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_CLOCK_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9063_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
# CONFIG_WDAT_WDT is not set
CONFIG_XILINX_WATCHDOG=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=y
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_RDC321X_WDT is not set
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
CONFIG_MEN_A21_WDT=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_CHARDEV is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
CONFIG_MFD_CS47L90=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS68470 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_RAVE_SP_CORE=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD9571MWV=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_WM8400=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_FWNODE=y
CONFIG_DVB_CORE=y
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y

#
# Media drivers
#
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_SMS_SIANO_MDTV=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# I2C Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_WM8775=y
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
CONFIG_VIDEO_SONY_BTF_MPX=y

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y

#
# Video decoders
#
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_OV9640=y
# CONFIG_VIDEO_MT9M111 is not set

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=y
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips

#
# SPI helper chips
#
# end of SPI helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA18250=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
# CONFIG_MEDIA_TUNER_TDA9887 is not set
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_IT913X=y
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=y
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=y
# CONFIG_DVB_STV6111 is not set
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_M88DS3103=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
# CONFIG_DVB_SI2165 is not set
# CONFIG_DVB_MN88472 is not set
CONFIG_DVB_MN88473=y

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8261=y
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_L64781=y
CONFIG_DVB_TDA1004X=y
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=y
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=y
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_CXD2841ER is not set
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_ZD1301_DEMOD=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51211=y
# CONFIG_DVB_OR51132 is not set
CONFIG_DVB_BCM3510=y
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_LGDT3306A is not set
CONFIG_DVB_LG2160=y
CONFIG_DVB_S5H1409=y
# CONFIG_DVB_AU8522_DTV is not set
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_TC90522 is not set
# CONFIG_DVB_MN88443X is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
CONFIG_DVB_LNBH25=y
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=y
CONFIG_DVB_A8293=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_IX2505V=y
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_AF9033=y
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_HELENE=y

#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
# CONFIG_DVB_SP2 is not set

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Customise DVB Frontends

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_MM=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration

# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=y
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
CONFIG_DRM_TINYDRM=y
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
# end of Backlight & LCD device support

CONFIG_HDMI=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
# CONFIG_SND_SOC_AMD_ACP3x is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
# CONFIG_SND_SOC_SOF_PCI is not set
# CONFIG_SND_SOC_SOF_ACPI is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

# CONFIG_SND_SOC_XILINX_I2S is not set
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX9860=y
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_ZX_AUD96P22=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
# CONFIG_SND_SOC_MT6358 is not set
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_X86 is not set
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID=y
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_GOLDFISH is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_MTK=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_APU=y
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MT6323 is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_MLXCPLD=y
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_88PM80X is not set
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_TPS6586X is not set
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_CROS_EC=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_MT6397=y

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_INTEL_IDMA64=y
# CONFIG_PCH_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DCDBAS is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_LAPTOP=y
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_DELL_RBU=y
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_MLX_PLATFORM=y
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_PCENGINES_APU2 is not set
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
CONFIG_CHROMEOS_PSTORE=y
# CONFIG_CHROMEOS_TBMC is not set
# CONFIG_CROS_EC_I2C is not set
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_MLXREG_HOTPLUG is not set
CONFIG_MLXREG_IO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_CLK_SIFIVE is not set
# end of Common Clock Framework

# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_QCOM_GLINK_NATIVE=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_INTEL is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_ARIZONA is not set
# CONFIG_EXTCON_AXP288 is not set
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=y
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX77843 is not set
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y

#
# Accelerometers
#
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
# CONFIG_MC3230 is not set
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7660 is not set
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=y
# CONFIG_AXP20X_ADC is not set
# CONFIG_AXP288_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_HX711 is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
# CONFIG_MCP3422 is not set
CONFIG_MEN_Z188_ADC=y
# CONFIG_NAU7802 is not set
CONFIG_PALMAS_GPADC=y
CONFIG_STX104=y
# CONFIG_TI_ADC081C is not set
# end of Analog to digital converters

#
# Analog Front Ends
#
# end of Analog Front Ends

#
# Amplifiers
#
# end of Amplifiers

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SENSIRION_SGP30=y
# CONFIG_SPS30 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
# CONFIG_CIO_DAC is not set
# CONFIG_DS4424 is not set
CONFIG_M62332=y
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
# CONFIG_TI_DAC5571 is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
# CONFIG_TSL2583 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=y
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_AK09911=y
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
# end of Magnetometer sensors

#
# Multiplexers
#
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Digital potentiometers
#
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_HP03=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX9500=y
CONFIG_SRF08=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=y
# end of Temperature sensors

# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_CROS_EC=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_MADERA_IRQ=y
# end of IRQ chip support

CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_CPCAP_USB is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
# CONFIG_ND_BLK is not set
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_RAVE_SP_EEPROM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_FME=y
# CONFIG_FPGA_DFL_FME_MGR is not set
CONFIG_FPGA_DFL_FME_BRIDGE=y
# CONFIG_FPGA_DFL_FME_REGION is not set
CONFIG_FPGA_DFL_AFU=y
# CONFIG_FPGA_DFL_PCI is not set
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
CONFIG_FTM_QUADDEC=y
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
# CONFIG_XFS_ASSERT_FATAL is not set
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lzo"
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_ALLOW_INSECURE_LEGACY is not set
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
# CONFIG_AFS_DEBUG_CURSOR is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity"

#
# Kernel hardening options
#
CONFIG_GCC_PLUGIN_STRUCTLEAK=y

#
# Memory initialization
#
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set
CONFIG_GCC_PLUGIN_STACKLEAK=y
CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
# CONFIG_STACKLEAK_METRICS is not set
CONFIG_STACKLEAK_RUNTIME_DISABLE=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECRDSA is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_AEGIS128L=y
CONFIG_CRYPTO_AEGIS256=y
CONFIG_CRYPTO_MORUS640=y
CONFIG_CRYPTO_MORUS1280=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_TPM_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
CONFIG_CMA_SIZE_SEL_MAX=y
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging

CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Lockups and Hangs

CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_TIMEKEEPING=y
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of Kernel hacking

[-- Attachment #3: dmesg.xz --]
[-- Type: application/x-xz, Size: 15320 bytes --]

[net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3818 bytes --]

FYI, we noticed the following commit (built with gcc-6):

commit: 9dd6d07682b10a55d1f49d495b85f7b945ff75ca ("[PATCH 10/11] net: dsa: Use PHYLINK for the CPU/DSA ports")
url: https://github.com/0day-ci/linux/commits/Ioana-Ciornei/Decoupling-PHYLINK-from-struct-net_device/20190528-061507


in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 2G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+------------------------------------------+------------+------------+
|                                          | 3a2573f868 | 9dd6d07682 |
+------------------------------------------+------------+------------+
| boot_successes                           | 4          | 0          |
| boot_failures                            | 0          | 6          |
| kernel_BUG_at_drivers/net/phy/mdio_bus.c | 0          | 6          |
| invalid_opcode:#[##]                     | 0          | 6          |
| EIP:mdiobus_free                         | 0          | 6          |
| Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
+------------------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <rong.a.chen@intel.com>


[   39.031781] kernel BUG at drivers/net/phy/mdio_bus.c:503!
[   39.049792] invalid opcode: 0000 [#1] PREEMPT
[   39.058345] CPU: 0 PID: 152 Comm: kworker/0:2 Tainted: G                T 5.2.0-rc1-00321-g9dd6d07 #1
[   39.076106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   39.091893] Workqueue: events deferred_probe_work_func
[   39.101903] EIP: mdiobus_free+0x21/0x39
[   39.109323] Code: 18 5f ed ff 5b 5e 5f 5d c3 55 89 e5 52 89 45 fc 8b 45 fc 8b 90 9c 00 00 00 83 fa 01 75 07 e8 9b fa 99 ff eb 1b 83 fa 03 74 02 <0f> 0b c7 80 9c 00 00 00 04 00 00 00 05 a0 00 00 00 e8 94 58 ed ff
[   39.144715] EAX: eff3e008 EBX: eff3a020 ECX: c23a9de9 EDX: 00000002
[   39.156773] ESI: f0403560 EDI: efffbe24 EBP: efffbdf8 ESP: efffbdf4
[   39.168825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010297
[   39.182048] CR0: 80050033 CR2: 00000000 CR3: 02781000 CR4: 000006b0
[   39.194136] Call Trace:
[   39.198932]  _devm_mdiobus_free+0xd/0x10
[   39.206573]  release_nodes+0x194/0x1ad
[   39.213804]  devres_release_all+0x37/0x3d
[   39.221709]  really_probe+0x2b4/0x3a3
[   39.228808]  driver_probe_device+0x110/0x14b
[   39.237206]  __device_attach_driver+0x9d/0xa5
[   39.245622]  bus_for_each_drv+0x65/0x77
[   39.253081]  __device_attach+0x8f/0x104
[   39.260507]  ? driver_allows_async_probing+0x26/0x26
[   39.270161]  device_initial_probe+0x14/0x16
[   39.278223]  bus_probe_device+0x22/0x64
[   39.285645]  deferred_probe_work_func+0x7b/0xa1
[   39.294428]  process_one_work+0x1bc/0x2eb
[   39.302332]  ? process_one_work+0x164/0x2eb
[   39.310539]  process_scheduled_works+0x1e/0x24
[   39.319218]  worker_thread+0x1cb/0x268
[   39.326604]  kthread+0xeb/0xf0
[   39.332607]  ? process_scheduled_works+0x24/0x24
[   39.341641]  ? __kthread_create_on_node+0x128/0x128
[   39.350985]  ret_from_fork+0x1e/0x28
[   39.369743] ---[ end trace 2d9c21baf7b99d11 ]---


To reproduce:

        # build kernel
	cd linux
	cp config-5.2.0-rc1-00321-g9dd6d07 .config
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 olddefconfig
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 prepare
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 modules_prepare
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 SHELL=/bin/bash
	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 bzImage


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email



Thanks,
Rong Chen


[-- Attachment #2: config-5.2.0-rc1-00321-g9dd6d07 --]
[-- Type: text/plain, Size: 138368 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.2.0-rc1 Kernel Configuration
#

#
# Compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60400
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_QUARK is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_RDC321X=y
CONFIG_X86_32_IRIS=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_PVH=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring

# CONFIG_X86_LEGACY_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_UMIP is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# end of Processor type and features

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle

# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
CONFIG_GEOS=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_GENERIC_GUP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_4_7=y
# end of GCOV-based kernel profiling

CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y

#
# GCC plugins
#
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# CONFIG_GCC_PLUGIN_RANDSTRUCT_PERFORMANCE is not set
# end of GCC plugins
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=y
# CONFIG_TLS_DEVICE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_BPFILTER=y
# CONFIG_BPFILTER_UMH is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
# CONFIG_TIPC_DIAG is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_8021Q=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ_COMMON=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_KSZ9477=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_LAN9303=y
# CONFIG_NET_DSA_TAG_SJA1105 is not set
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
# CONFIG_BATMAN_ADV_BLA is not set
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUGFS=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_SYSFS=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
# CONFIG_MPLS_IPTUNNEL is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
CONFIG_CGROUP_NET_PRIO=y
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
CONFIG_YAM=y
# end of AX.25 network device drivers

# CONFIG_CAN is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
# CONFIG_BT_WILINK is not set
CONFIG_BT_MTKSDIO=y
# CONFIG_BT_MTKUART is not set
CONFIG_BT_HCIRSI=y
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_MLME_DEBUG is not set
# CONFIG_MAC80211_STA_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_OCB_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_PS_DEBUG is not set
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
# CONFIG_MAC80211_MESH_CSA_DEBUG is not set
# CONFIG_MAC80211_MESH_PS_DEBUG is not set
# CONFIG_MAC80211_TDLS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_MRVL_UART is not set
# CONFIG_NFC_ST_NCI_I2C is not set
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support

#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# Partition parsers
#
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set

#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_CS553X=y
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_PLATFORM is not set

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_VHOST_RING=y
# end of Intel MIC & related support

CONFIG_ECHO=y
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_DWC=y
# CONFIG_SATA_DWC_OLD_DMA is not set
CONFIG_SATA_DWC_DEBUG=y
CONFIG_SATA_DWC_VDEBUG=y
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
CONFIG_CAIF_VIRTIO=y

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_I40E is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_SFP=y
# CONFIG_AMD_PHY is not set
CONFIG_AQUANTIA_PHY=y
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CICADA_PHY=y
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_TERANETICS_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
# CONFIG_PPPOE is not set
# CONFIG_PPTP is not set
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_DEBUG=y
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
CONFIG_WCN36XX=y
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=y
# CONFIG_P54_PCI is not set
CONFIG_P54_LEDS=y
# CONFIG_PRISM54 is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_COEX=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
# CONFIG_WL1251_SDIO is not set
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SDIO=y
# CONFIG_WILINK_PLATFORM_DATA is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=y
CONFIG_VIRT_WIFI=y

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_NETDEVSIM=y
# CONFIG_NET_FAILOVER is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_DUMMYLL=y
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
CONFIG_NVM=y
CONFIG_NVM_PBLK=y
# CONFIG_NVM_PBLK_DEBUG is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_BYD is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
# CONFIG_MOUSE_PS2_CYPRESS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_ELANTECH_SMBUS is not set
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_MSM_VIBRATOR=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX77693_HAPTIC=y
# CONFIG_INPUT_MAX8925_ONKEY is not set
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_GP2A is not set
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_REGULATOR_HAPTIC=y
# CONFIG_INPUT_RETU_PWRBUTTON is not set
CONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=y
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
# CONFIG_INPUT_DRV2665_HAPTICS is not set
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_NULL_TTY=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
# CONFIG_LDISC_AUTOLOAD is not set
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
# end of Serial drivers

CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices

CONFIG_RANDOM_TRUST_CPU=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_LTC4306=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_SCx200_ACB is not set
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_MCP23S08=y
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=y
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_MADERA is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_UCB1400=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

# CONFIG_GPIO_MOCKUP is not set
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=y
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_CHARGER_DA9150 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_AXP20X_POWER=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83773G=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_CLOCK_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9063_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
# CONFIG_WDAT_WDT is not set
CONFIG_XILINX_WATCHDOG=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=y
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_RDC321X_WDT is not set
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
CONFIG_MEN_A21_WDT=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_CHARDEV is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
CONFIG_MFD_CS47L90=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS68470 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_RAVE_SP_CORE=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD9571MWV=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_WM8400=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_FWNODE=y
CONFIG_DVB_CORE=y
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y

#
# Media drivers
#
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_SMS_SIANO_MDTV=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# I2C Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_WM8775=y
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
CONFIG_VIDEO_SONY_BTF_MPX=y

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y

#
# Video decoders
#
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_OV9640=y
# CONFIG_VIDEO_MT9M111 is not set

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=y
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips

#
# SPI helper chips
#
# end of SPI helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA18250=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
# CONFIG_MEDIA_TUNER_TDA9887 is not set
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_IT913X=y
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=y
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=y
# CONFIG_DVB_STV6111 is not set
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_M88DS3103=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
# CONFIG_DVB_SI2165 is not set
# CONFIG_DVB_MN88472 is not set
CONFIG_DVB_MN88473=y

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8261=y
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_L64781=y
CONFIG_DVB_TDA1004X=y
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=y
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=y
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_CXD2841ER is not set
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_ZD1301_DEMOD=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51211=y
# CONFIG_DVB_OR51132 is not set
CONFIG_DVB_BCM3510=y
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_LGDT3306A is not set
CONFIG_DVB_LG2160=y
CONFIG_DVB_S5H1409=y
# CONFIG_DVB_AU8522_DTV is not set
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_TC90522 is not set
# CONFIG_DVB_MN88443X is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
CONFIG_DVB_LNBH25=y
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=y
CONFIG_DVB_A8293=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_IX2505V=y
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_AF9033=y
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_HELENE=y

#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
# CONFIG_DVB_SP2 is not set

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Customise DVB Frontends

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_MM=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration

# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=y
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
CONFIG_DRM_TINYDRM=y
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
# end of Backlight & LCD device support

CONFIG_HDMI=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
# CONFIG_SND_SOC_AMD_ACP3x is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
# CONFIG_SND_SOC_SOF_PCI is not set
# CONFIG_SND_SOC_SOF_ACPI is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

# CONFIG_SND_SOC_XILINX_I2S is not set
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX9860=y
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_ZX_AUD96P22=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
# CONFIG_SND_SOC_MT6358 is not set
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_X86 is not set
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID=y
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_GOLDFISH is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_MTK=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_APU=y
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MT6323 is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_MLXCPLD=y
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_88PM80X is not set
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_TPS6586X is not set
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_CROS_EC=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_MT6397=y

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_INTEL_IDMA64=y
# CONFIG_PCH_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DCDBAS is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_LAPTOP=y
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_DELL_RBU=y
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_MLX_PLATFORM=y
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_PCENGINES_APU2 is not set
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
CONFIG_CHROMEOS_PSTORE=y
# CONFIG_CHROMEOS_TBMC is not set
# CONFIG_CROS_EC_I2C is not set
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_MLXREG_HOTPLUG is not set
CONFIG_MLXREG_IO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_CLK_SIFIVE is not set
# end of Common Clock Framework

# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_QCOM_GLINK_NATIVE=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_INTEL is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_ARIZONA is not set
# CONFIG_EXTCON_AXP288 is not set
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=y
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX77843 is not set
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y

#
# Accelerometers
#
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
# CONFIG_MC3230 is not set
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7660 is not set
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=y
# CONFIG_AXP20X_ADC is not set
# CONFIG_AXP288_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_HX711 is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
# CONFIG_MCP3422 is not set
CONFIG_MEN_Z188_ADC=y
# CONFIG_NAU7802 is not set
CONFIG_PALMAS_GPADC=y
CONFIG_STX104=y
# CONFIG_TI_ADC081C is not set
# end of Analog to digital converters

#
# Analog Front Ends
#
# end of Analog Front Ends

#
# Amplifiers
#
# end of Amplifiers

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SENSIRION_SGP30=y
# CONFIG_SPS30 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
# CONFIG_CIO_DAC is not set
# CONFIG_DS4424 is not set
CONFIG_M62332=y
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
# CONFIG_TI_DAC5571 is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
# CONFIG_TSL2583 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=y
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_AK09911=y
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
# end of Magnetometer sensors

#
# Multiplexers
#
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Digital potentiometers
#
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_HP03=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX9500=y
CONFIG_SRF08=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=y
# end of Temperature sensors

# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_CROS_EC=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_MADERA_IRQ=y
# end of IRQ chip support

CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_CPCAP_USB is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
# CONFIG_ND_BLK is not set
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_RAVE_SP_EEPROM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_FME=y
# CONFIG_FPGA_DFL_FME_MGR is not set
CONFIG_FPGA_DFL_FME_BRIDGE=y
# CONFIG_FPGA_DFL_FME_REGION is not set
CONFIG_FPGA_DFL_AFU=y
# CONFIG_FPGA_DFL_PCI is not set
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
CONFIG_FTM_QUADDEC=y
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
# CONFIG_XFS_ASSERT_FATAL is not set
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lzo"
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_ALLOW_INSECURE_LEGACY is not set
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
# CONFIG_AFS_DEBUG_CURSOR is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity"

#
# Kernel hardening options
#
CONFIG_GCC_PLUGIN_STRUCTLEAK=y

#
# Memory initialization
#
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set
CONFIG_GCC_PLUGIN_STACKLEAK=y
CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
# CONFIG_STACKLEAK_METRICS is not set
CONFIG_STACKLEAK_RUNTIME_DISABLE=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECRDSA is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_AEGIS128L=y
CONFIG_CRYPTO_AEGIS256=y
CONFIG_CRYPTO_MORUS640=y
CONFIG_CRYPTO_MORUS1280=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_TPM_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
CONFIG_CMA_SIZE_SEL_MAX=y
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging

CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Lockups and Hangs

CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_TIMEKEEPING=y
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of Kernel hacking

[-- Attachment #3: dmesg.xz --]
[-- Type: application/x-xz, Size: 15320 bytes --]

RE: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[Ioana Ciornei]

> Subject: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c
> 
> FYI, we noticed the following commit (built with gcc-6):
> 
> commit: 9dd6d07682b10a55d1f49d495b85f7b945ff75ca ("[PATCH 10/11] net:
> dsa: Use PHYLINK for the CPU/DSA ports")
> url:
> 
> 
> in testcase: boot
> 
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m
> 2G
> 
> caused below changes (please refer to attached dmesg/kmsg for entire
> log/backtrace):
> 
> 
> +------------------------------------------+------------+------------+
> |                                          | 3a2573f868 | 9dd6d07682 |
> +------------------------------------------+------------+------------+
> | boot_successes                           | 4          | 0          |
> | boot_failures                            | 0          | 6          |
> | kernel_BUG_at_drivers/net/phy/mdio_bus.c | 0          | 6          |
> | invalid_opcode:#[##]                     | 0          | 6          |
> | EIP:mdiobus_free                         | 0          | 6          |
> | Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
> +------------------------------------------+------------+------------+
> 
> 
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <rong.a.chen@intel.com>
> 
> 
> [   39.031781] kernel BUG at drivers/net/phy/mdio_bus.c:503!
> [   39.049792] invalid opcode: 0000 [#1] PREEMPT
> [   39.058345] CPU: 0 PID: 152 Comm: kworker/0:2 Tainted: G                T 5.2.0-
> rc1-00321-g9dd6d07 #1
> [   39.076106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> 1.10.2-1 04/01/2014
> [   39.091893] Workqueue: events deferred_probe_work_func
> [   39.101903] EIP: mdiobus_free+0x21/0x39
> [   39.109323] Code: 18 5f ed ff 5b 5e 5f 5d c3 55 89 e5 52 89 45 fc 8b 45 fc 8b
> 90 9c 00 00 00 83 fa 01 75 07 e8 9b fa 99 ff eb 1b 83 fa 03 74 02 <0f> 0b c7 80 9c
> 00 00 00 04 00 00 00 05 a0 00 00 00 e8 94 58 ed ff
> [   39.144715] EAX: eff3e008 EBX: eff3a020 ECX: c23a9de9 EDX: 00000002
> [   39.156773] ESI: f0403560 EDI: efffbe24 EBP: efffbdf8 ESP: efffbdf4
> [   39.168825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010297
> [   39.182048] CR0: 80050033 CR2: 00000000 CR3: 02781000 CR4: 000006b0
> [   39.194136] Call Trace:
> [   39.198932]  _devm_mdiobus_free+0xd/0x10
> [   39.206573]  release_nodes+0x194/0x1ad
> [   39.213804]  devres_release_all+0x37/0x3d
> [   39.221709]  really_probe+0x2b4/0x3a3
> [   39.228808]  driver_probe_device+0x110/0x14b
> [   39.237206]  __device_attach_driver+0x9d/0xa5
> [   39.245622]  bus_for_each_drv+0x65/0x77
> [   39.253081]  __device_attach+0x8f/0x104
> [   39.260507]  ? driver_allows_async_probing+0x26/0x26
> [   39.270161]  device_initial_probe+0x14/0x16
> [   39.278223]  bus_probe_device+0x22/0x64
> [   39.285645]  deferred_probe_work_func+0x7b/0xa1
> [   39.294428]  process_one_work+0x1bc/0x2eb
> [   39.302332]  ? process_one_work+0x164/0x2eb
> [   39.310539]  process_scheduled_works+0x1e/0x24
> [   39.319218]  worker_thread+0x1cb/0x268
> [   39.326604]  kthread+0xeb/0xf0
> [   39.332607]  ? process_scheduled_works+0x24/0x24
> [   39.341641]  ? __kthread_create_on_node+0x128/0x128
> [   39.350985]  ret_from_fork+0x1e/0x28
> [   39.369743] ---[ end trace 2d9c21baf7b99d11 ]---
> 

Hi,

Just to give more context onto what's the path that reaches the BUG_ON, here is the last part of the dmesg before the crash:

[   38.772573] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f
[   38.790366] libphy: dsa slave smi: probed
[   38.799285] dsa-loop fixed-0:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[   38.815725] dsa-loop fixed-0:1f lan1 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
[   38.856337] dsa-loop fixed-0:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[   38.872670] dsa-loop fixed-0:1f lan2 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
[   38.903821] dsa-loop fixed-0:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[   38.920337] dsa-loop fixed-0:1f lan3 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
[   38.952873] dsa-loop fixed-0:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[   38.969462] dsa-loop fixed-0:1f lan4 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
[   39.002349] could not attach to PHY: -19
[   39.010359] dsa-loop fixed-0:1f: failed to setup link for port 0.5

The dsa-loop mockup driver is trying to register a switch using information based on the dsa_chip_data structure rather than on DTS.
This, of course, leads to PHYLINK being unable to successfully call phylink_of_phy_connect() on a NULL device_node.

Rewinding the stack, we see that dsa_tree_setup() fails and that calling dsa_tree_remove_switch() should take care of removing/unregistering any resources previously allocated.
This does not happen.

Of special interest here is unregistering the MDIO bus which was registered in dsa_switch_setup().
The mdiobus_unregister() is never called because it is conditioned by dts->setup being true, which is set only after _all_ setup steps were performed successfully.
This leads the code to the part where it tries to free an MDIO bus which was not unregistered properly, which is exactly this BUG_ON.

The immediate fix for this is to use PHYLINK on the CPU port only when the device_node associated is not NULL.
As a separate patch from this series, I will also try to fix the initial bug.

--
Ioana

> 
> To reproduce:
> 
>         # build kernel
> 	cd linux
> 	cp config-5.2.0-rc1-00321-g9dd6d07 .config
> 	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 olddefconfig
> 	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 prepare
> 	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 modules_prepare
> 	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 SHELL=/bin/bash
> 	make HOSTCC=gcc-6 CC=gcc-6 ARCH=i386 bzImage
> 
> 
>         git clone https://github.com/intel/lkp-tests.git 
>         cd lkp-tests
>         bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
> 
> 
> 
> Thanks,
> Rong Chen

Re: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[Russell King - ARM Linux admin]

On Wed, May 29, 2019 at 04:11:57PM +0000, Ioana Ciornei wrote:
> > Subject: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c
> > 
> > FYI, we noticed the following commit (built with gcc-6):
> > 
> > commit: 9dd6d07682b10a55d1f49d495b85f7b945ff75ca ("[PATCH 10/11] net:
> > dsa: Use PHYLINK for the CPU/DSA ports")
> > url:
> > 
> > 
> > in testcase: boot
> > 
> > on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m
> > 2G
> > 
> > caused below changes (please refer to attached dmesg/kmsg for entire
> > log/backtrace):
> > 
> > 
> > +------------------------------------------+------------+------------+
> > |                                          | 3a2573f868 | 9dd6d07682 |
> > +------------------------------------------+------------+------------+
> > | boot_successes                           | 4          | 0          |
> > | boot_failures                            | 0          | 6          |
> > | kernel_BUG_at_drivers/net/phy/mdio_bus.c | 0          | 6          |
> > | invalid_opcode:#[##]                     | 0          | 6          |
> > | EIP:mdiobus_free                         | 0          | 6          |
> > | Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
> > +------------------------------------------+------------+------------+
> > 
> > 
> > If you fix the issue, kindly add following tag
> > Reported-by: kernel test robot <rong.a.chen@intel.com>
> > 
> > 
> > [   39.031781] kernel BUG at drivers/net/phy/mdio_bus.c:503!
> > [   39.049792] invalid opcode: 0000 [#1] PREEMPT
> > [   39.058345] CPU: 0 PID: 152 Comm: kworker/0:2 Tainted: G                T 5.2.0-
> > rc1-00321-g9dd6d07 #1
> > [   39.076106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> > 1.10.2-1 04/01/2014
> > [   39.091893] Workqueue: events deferred_probe_work_func
> > [   39.101903] EIP: mdiobus_free+0x21/0x39
> > [   39.109323] Code: 18 5f ed ff 5b 5e 5f 5d c3 55 89 e5 52 89 45 fc 8b 45 fc 8b
> > 90 9c 00 00 00 83 fa 01 75 07 e8 9b fa 99 ff eb 1b 83 fa 03 74 02 <0f> 0b c7 80 9c
> > 00 00 00 04 00 00 00 05 a0 00 00 00 e8 94 58 ed ff
> > [   39.144715] EAX: eff3e008 EBX: eff3a020 ECX: c23a9de9 EDX: 00000002
> > [   39.156773] ESI: f0403560 EDI: efffbe24 EBP: efffbdf8 ESP: efffbdf4
> > [   39.168825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010297
> > [   39.182048] CR0: 80050033 CR2: 00000000 CR3: 02781000 CR4: 000006b0
> > [   39.194136] Call Trace:
> > [   39.198932]  _devm_mdiobus_free+0xd/0x10
> > [   39.206573]  release_nodes+0x194/0x1ad
> > [   39.213804]  devres_release_all+0x37/0x3d
> > [   39.221709]  really_probe+0x2b4/0x3a3
> > [   39.228808]  driver_probe_device+0x110/0x14b
> > [   39.237206]  __device_attach_driver+0x9d/0xa5
> > [   39.245622]  bus_for_each_drv+0x65/0x77
> > [   39.253081]  __device_attach+0x8f/0x104
> > [   39.260507]  ? driver_allows_async_probing+0x26/0x26
> > [   39.270161]  device_initial_probe+0x14/0x16
> > [   39.278223]  bus_probe_device+0x22/0x64
> > [   39.285645]  deferred_probe_work_func+0x7b/0xa1
> > [   39.294428]  process_one_work+0x1bc/0x2eb
> > [   39.302332]  ? process_one_work+0x164/0x2eb
> > [   39.310539]  process_scheduled_works+0x1e/0x24
> > [   39.319218]  worker_thread+0x1cb/0x268
> > [   39.326604]  kthread+0xeb/0xf0
> > [   39.332607]  ? process_scheduled_works+0x24/0x24
> > [   39.341641]  ? __kthread_create_on_node+0x128/0x128
> > [   39.350985]  ret_from_fork+0x1e/0x28
> > [   39.369743] ---[ end trace 2d9c21baf7b99d11 ]---
> > 
> 
> Hi,
> 
> Just to give more context onto what's the path that reaches the BUG_ON, here is the last part of the dmesg before the crash:
> 
> [   38.772573] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f
> [   38.790366] libphy: dsa slave smi: probed
> [   38.799285] dsa-loop fixed-0:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
> [   38.815725] dsa-loop fixed-0:1f lan1 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
> [   38.856337] dsa-loop fixed-0:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
> [   38.872670] dsa-loop fixed-0:1f lan2 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
> [   38.903821] dsa-loop fixed-0:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
> [   38.920337] dsa-loop fixed-0:1f lan3 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
> [   38.952873] dsa-loop fixed-0:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
> [   38.969462] dsa-loop fixed-0:1f lan4 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
> [   39.002349] could not attach to PHY: -19
> [   39.010359] dsa-loop fixed-0:1f: failed to setup link for port 0.5
> 
> The dsa-loop mockup driver is trying to register a switch using information based on the dsa_chip_data structure rather than on DTS.
> This, of course, leads to PHYLINK being unable to successfully call phylink_of_phy_connect() on a NULL device_node.

Right, phylink_of_phy_connect() is not supposed to be called with a NULL
device node, but if it is, it fails gracefully.

> Rewinding the stack, we see that dsa_tree_setup() fails and that calling dsa_tree_remove_switch() should take care of removing/unregistering any resources previously allocated.
> This does not happen.
> 
> Of special interest here is unregistering the MDIO bus which was registered in dsa_switch_setup().
> The mdiobus_unregister() is never called because it is conditioned by dts->setup being true, which is set only after _all_ setup steps were performed successfully.
> This leads the code to the part where it tries to free an MDIO bus which was not unregistered properly, which is exactly this BUG_ON.
> 
> The immediate fix for this is to use PHYLINK on the CPU port only when the device_node associated is not NULL.
> As a separate patch from this series, I will also try to fix the initial bug.

Yep, it sounds like a short-coming of the error handling, which should
be the first priority to fix; avoiding PHYLINK on the CPU port when
the device_node is NULL seems to me like papering over a bug.

However, should mention that I have been carrying a patch for some time
for ZII boards to disable the error path for "no PHY" in
dsa_slave_phy_setup() - iow, when phylink_of_phy_connect() returns
-ENODEV and dsa_slave_phy_connect() also errors out.  That was the only
way I could get the SFF modules to work there.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

Re: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[Ioana Ciornei]

On 5/29/19 7:25 PM, Russell King - ARM Linux admin wrote:
> On Wed, May 29, 2019 at 04:11:57PM +0000, Ioana Ciornei wrote:
>>> Subject: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c
>>>
>>> FYI, we noticed the following commit (built with gcc-6):
>>>
>>> commit: 9dd6d07682b10a55d1f49d495b85f7b945ff75ca ("[PATCH 10/11] net:
>>> dsa: Use PHYLINK for the CPU/DSA ports")
>>> url:
>>>
>>>
>>> in testcase: boot
>>>
>>> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m
>>> 2G
>>>
>>> caused below changes (please refer to attached dmesg/kmsg for entire
>>> log/backtrace):
>>>
>>>
>>> +------------------------------------------+------------+------------+
>>> |                                          | 3a2573f868 | 9dd6d07682 |
>>> +------------------------------------------+------------+------------+
>>> | boot_successes                           | 4          | 0          |
>>> | boot_failures                            | 0          | 6          |
>>> | kernel_BUG_at_drivers/net/phy/mdio_bus.c | 0          | 6          |
>>> | invalid_opcode:#[##]                     | 0          | 6          |
>>> | EIP:mdiobus_free                         | 0          | 6          |
>>> | Kernel_panic-not_syncing:Fatal_exception | 0          | 6          |
>>> +------------------------------------------+------------+------------+
>>>
>>>
>>> If you fix the issue, kindly add following tag
>>> Reported-by: kernel test robot <rong.a.chen@intel.com>
>>>
>>>
>>> [   39.031781] kernel BUG at drivers/net/phy/mdio_bus.c:503!
>>> [   39.049792] invalid opcode: 0000 [#1] PREEMPT
>>> [   39.058345] CPU: 0 PID: 152 Comm: kworker/0:2 Tainted: G                T 5.2.0-
>>> rc1-00321-g9dd6d07 #1
>>> [   39.076106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
>>> 1.10.2-1 04/01/2014
>>> [   39.091893] Workqueue: events deferred_probe_work_func
>>> [   39.101903] EIP: mdiobus_free+0x21/0x39
>>> [   39.109323] Code: 18 5f ed ff 5b 5e 5f 5d c3 55 89 e5 52 89 45 fc 8b 45 fc 8b
>>> 90 9c 00 00 00 83 fa 01 75 07 e8 9b fa 99 ff eb 1b 83 fa 03 74 02 <0f> 0b c7 80 9c
>>> 00 00 00 04 00 00 00 05 a0 00 00 00 e8 94 58 ed ff
>>> [   39.144715] EAX: eff3e008 EBX: eff3a020 ECX: c23a9de9 EDX: 00000002
>>> [   39.156773] ESI: f0403560 EDI: efffbe24 EBP: efffbdf8 ESP: efffbdf4
>>> [   39.168825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010297
>>> [   39.182048] CR0: 80050033 CR2: 00000000 CR3: 02781000 CR4: 000006b0
>>> [   39.194136] Call Trace:
>>> [   39.198932]  _devm_mdiobus_free+0xd/0x10
>>> [   39.206573]  release_nodes+0x194/0x1ad
>>> [   39.213804]  devres_release_all+0x37/0x3d
>>> [   39.221709]  really_probe+0x2b4/0x3a3
>>> [   39.228808]  driver_probe_device+0x110/0x14b
>>> [   39.237206]  __device_attach_driver+0x9d/0xa5
>>> [   39.245622]  bus_for_each_drv+0x65/0x77
>>> [   39.253081]  __device_attach+0x8f/0x104
>>> [   39.260507]  ? driver_allows_async_probing+0x26/0x26
>>> [   39.270161]  device_initial_probe+0x14/0x16
>>> [   39.278223]  bus_probe_device+0x22/0x64
>>> [   39.285645]  deferred_probe_work_func+0x7b/0xa1
>>> [   39.294428]  process_one_work+0x1bc/0x2eb
>>> [   39.302332]  ? process_one_work+0x164/0x2eb
>>> [   39.310539]  process_scheduled_works+0x1e/0x24
>>> [   39.319218]  worker_thread+0x1cb/0x268
>>> [   39.326604]  kthread+0xeb/0xf0
>>> [   39.332607]  ? process_scheduled_works+0x24/0x24
>>> [   39.341641]  ? __kthread_create_on_node+0x128/0x128
>>> [   39.350985]  ret_from_fork+0x1e/0x28
>>> [   39.369743] ---[ end trace 2d9c21baf7b99d11 ]---
>>>
>>
>> Hi,
>>
>> Just to give more context onto what's the path that reaches the BUG_ON, here is the last part of the dmesg before the crash:
>>
>> [   38.772573] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f
>> [   38.790366] libphy: dsa slave smi: probed
>> [   38.799285] dsa-loop fixed-0:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
>> [   38.815725] dsa-loop fixed-0:1f lan1 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
>> [   38.856337] dsa-loop fixed-0:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
>> [   38.872670] dsa-loop fixed-0:1f lan2 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
>> [   38.903821] dsa-loop fixed-0:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
>> [   38.920337] dsa-loop fixed-0:1f lan3 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
>> [   38.952873] dsa-loop fixed-0:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
>> [   38.969462] dsa-loop fixed-0:1f lan4 (uninitialized): phy: setting supported 00,00000000,000062c8 advertising 00,00000000,000062c8
>> [   39.002349] could not attach to PHY: -19
>> [   39.010359] dsa-loop fixed-0:1f: failed to setup link for port 0.5
>>
>> The dsa-loop mockup driver is trying to register a switch using information based on the dsa_chip_data structure rather than on DTS.
>> This, of course, leads to PHYLINK being unable to successfully call phylink_of_phy_connect() on a NULL device_node.
> 
> Right, phylink_of_phy_connect() is not supposed to be called with a NULL
> device node, but if it is, it fails gracefull
 >
>> Rewinding the stack, we see that dsa_tree_setup() fails and that calling dsa_tree_remove_switch() should take care of removing/unregistering any resources previously allocated.
>> This does not happen.
>>
>> Of special interest here is unregistering the MDIO bus which was registered in dsa_switch_setup().
>> The mdiobus_unregister() is never called because it is conditioned by dts->setup being true, which is set only after _all_ setup steps were performed successfully.
>> This leads the code to the part where it tries to free an MDIO bus which was not unregistered properly, which is exactly this BUG_ON.
>>
>> The immediate fix for this is to use PHYLINK on the CPU port only when the device_node associated is not NULL.
>> As a separate patch from this series, I will also try to fix the initial bug.
> 
> Yep, it sounds like a short-coming of the error handling, which should
> be the first priority to fix; avoiding PHYLINK on the CPU port when
> the device_node is NULL seems to me like papering over a bug.
I will add a patch that fixes the error path. I agree that this is 
important.

However, this will not fix dsa-loop (or any other driver that doesn't 
probe on OF bindings) since the phylink_of_phy_connect() will still fail 
on the CPU port. From what I see in dsa_port_setup_phy_of(), the error 
was ignored previously:

    phydev = dsa_port_get_phy_device(dp);
    if (!phydev)
          return 0;

I don't see how this method is sane either.

--
Ioana

> 
> However, should mention that I have been carrying a patch for some time
> for ZII boards to disable the error path for "no PHY" in
> dsa_slave_phy_setup() - iow, when phylink_of_phy_connect() returns
> -ENODEV and dsa_slave_phy_connect() also errors out.  That was the only
> way I could get the SFF modules to work there.
> 

Re: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[Andrew Lunn]

>     phydev = dsa_port_get_phy_device(dp);
>     if (!phydev)
>           return 0;
> 
> I don't see how this method is sane either.

If i remember correctly, the thinking was, you can get away without
the PHY, at least during bring up of a new switch/board. So don't
consider this a fatal error. Now that it is fatal, in the sense of an
Opps, maybe we should change this.

      Andrew

Re: [net] 9dd6d07682: kernel_BUG_at_drivers/net/phy/mdio_bus.c

[Andrew Lunn]

[-- Attachment #1: Type: text/plain, Size: 400 bytes --]

>     phydev = dsa_port_get_phy_device(dp);
>     if (!phydev)
>           return 0;
> 
> I don't see how this method is sane either.

If i remember correctly, the thinking was, you can get away without
the PHY, at least during bring up of a new switch/board. So don't
consider this a fatal error. Now that it is fatal, in the sense of an
Opps, maybe we should change this.

      Andrew