All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Maya Erez <merez@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
	Tzahi Sabo <stzahi@codeaurora.org>
Subject: [PATCH 06/11] wil6210: clear FW and ucode log address
Date: Sun, 16 Jun 2019 10:26:02 +0300	[thread overview]
Message-ID: <1560669967-23706-7-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1560669967-23706-1-git-send-email-merez@codeaurora.org>

Clear the FW and ucode log address on device initialization to allow
user space app identify when the address was set by FW/ucode and it can
start read.

Signed-off-by: Tzahi Sabo <stzahi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/main.c     | 15 +++++++++++++++
 drivers/net/wireless/ath/wil6210/pcie_bus.c |  1 +
 drivers/net/wireless/ath/wil6210/wil6210.h  |  1 +
 3 files changed, 17 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 3c30076..f7b9e6b 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1522,6 +1522,7 @@ int wil_ps_update(struct wil6210_priv *wil, enum wmi_ps_profile_type ps_profile)
 
 static void wil_pre_fw_config(struct wil6210_priv *wil)
 {
+	wil_clear_fw_log_addr(wil);
 	/* Mark FW as loaded from host */
 	wil_s(wil, RGF_USER_USAGE_6, 1);
 
@@ -1579,6 +1580,20 @@ static int wil_restore_vifs(struct wil6210_priv *wil)
 }
 
 /*
+ * Clear FW and ucode log start addr to indicate FW log is not ready. The host
+ * driver clears the addresses before FW starts and FW initializes the address
+ * when it is ready to send logs.
+ */
+void wil_clear_fw_log_addr(struct wil6210_priv *wil)
+{
+	/* FW log addr */
+	wil_w(wil, RGF_USER_USAGE_1, 0);
+	/* ucode log addr */
+	wil_w(wil, RGF_USER_USAGE_2, 0);
+	wil_dbg_misc(wil, "Cleared FW and ucode log address");
+}
+
+/*
  * We reset all the structures, and we reset the UMAC.
  * After calling this routine, you're expected to reload
  * the firmware.
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 4e2d922..9f5a914 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -420,6 +420,7 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	/* rollback to bus_disable */
 
+	wil_clear_fw_log_addr(wil);
 	rc = wil_if_add(wil);
 	if (rc) {
 		wil_err(wil, "wil_if_add failed: %d\n", rc);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 75abec2..afbc524 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1425,4 +1425,5 @@ int wmi_addba_rx_resp_edma(struct wil6210_priv *wil, u8 mid, u8 cid,
 
 void update_supported_bands(struct wil6210_priv *wil);
 
+void wil_clear_fw_log_addr(struct wil6210_priv *wil);
 #endif /* __WIL6210_H__ */
-- 
1.9.1


  parent reply	other threads:[~2019-06-16  7:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-16  7:25 [PATCH 00/11] wil6210 patches Maya Erez
2019-06-16  7:25 ` [PATCH 01/11] wil6210: do not reset FW in STA to P2P client interface switch Maya Erez
2019-06-27 17:51   ` Kalle Valo
2019-06-16  7:25 ` [PATCH 02/11] wil6210: enlarge Tx status ring size Maya Erez
2019-06-16  7:25 ` [PATCH 03/11] wil6210: increase the frequency of status ring hw tail update Maya Erez
2019-06-16  7:26 ` [PATCH 04/11] wil6210: Add support for setting RBUFCAP configuration Maya Erez
2019-06-16  7:26 ` [PATCH 05/11] wil6210: fix printout in wil_read_pmccfg Maya Erez
2019-06-16  7:26 ` Maya Erez [this message]
2019-06-16  7:26 ` [PATCH 07/11] wil6210: update cid boundary check of wil_find_cid/_by_idx() Maya Erez
2019-06-16  7:26 ` [PATCH 08/11] wil6210: publish max_msdu_size to FW on BCAST ring Maya Erez
2019-06-16  7:26 ` [PATCH 09/11] wil6210: add support for reading multiple RFs temperature via debugfs Maya Erez
2019-06-16  7:26 ` [PATCH 10/11] wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeout Maya Erez
2019-06-16  7:26 ` [PATCH 11/11] wil6210: drop old event after " Maya Erez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560669967-23706-7-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=stzahi@codeaurora.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.