All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: lorenzo@kernel.org, Jonathan.Cameron@huawei.com, Stable@vger.kernel.org
Subject: patch "iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller" added to staging-linus
Date: Mon, 17 Jun 2019 22:32:42 +0200	[thread overview]
Message-ID: <1560803562145218@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller

to my staging git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From bce0d57db388cdb1c1931d0aa7d31c77b590e0f0 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sun, 19 May 2019 10:58:23 +0200
Subject: iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller

Properly suspend/resume i2c slaves connected to st_lsm6dsx master
controller if the CPU goes in suspended state

Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 25 +++++++++++++-------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 004a8a1a0027..6ef3577234a0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -271,6 +271,7 @@ struct st_lsm6dsx_sensor {
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
  * @page_lock: Mutex to prevent concurrent memory page configuration.
  * @fifo_mode: FIFO operating mode supported by the device.
+ * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -288,6 +289,7 @@ struct st_lsm6dsx_hw {
 	struct mutex page_lock;
 
 	enum st_lsm6dsx_fifo_mode fifo_mode;
+	u8 suspend_mask;
 	u8 enable_mask;
 	u8 ts_sip;
 	u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index cf82c9049945..be5c87c8266d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1110,8 +1110,6 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 {
 	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
 	struct st_lsm6dsx_sensor *sensor;
-	const struct st_lsm6dsx_reg *reg;
-	unsigned int data;
 	int i, err = 0;
 
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
@@ -1122,12 +1120,16 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
-		reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-		data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
-		err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
-						    data);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, false);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, false);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask |= BIT(sensor->id);
 	}
 
 	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
@@ -1147,12 +1149,19 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 			continue;
 
 		sensor = iio_priv(hw->iio_devs[i]);
-		if (!(hw->enable_mask & BIT(sensor->id)))
+		if (!(hw->suspend_mask & BIT(sensor->id)))
 			continue;
 
-		err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, true);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, true);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask &= ~BIT(sensor->id);
 	}
 
 	if (hw->enable_mask)
-- 
2.22.0



                 reply	other threads:[~2019-06-17 20:32 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560803562145218@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=Stable@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.