From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eugen.Hristev at microchip.com Date: Wed, 4 Sep 2019 08:19:43 +0000 Subject: [U-Boot] [PATCH] configs: sama5d27_wlsom1_ek: add CONFIG_SPL_AT91_MCK_BYPASS Message-ID: <1567584842-14077-1-git-send-email-eugen.hristev@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Eugen Hristev This board has an external oscillator as MCK that does not need driving. Bypass the driving for the main oscillator in SPL. Signed-off-by: Eugen Hristev --- configs/sama5d27_wlsom1_ek_mmc_defconfig | 1 + configs/sama5d27_wlsom1_ek_qspiflash_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig index 5584c9c..50a8a8e 100644 --- a/configs/sama5d27_wlsom1_ek_mmc_defconfig +++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_TEXT_BASE=0x200000 CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set +CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig index 56cca3e..ec05af1 100644 --- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig +++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig @@ -31,6 +31,7 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set -- 2.7.4