From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Thomas Huth <thuth@redhat.com>
Subject: [PULL 13/30] hw/isa: Introduce a CONFIG_ISA_SUPERIO switch for isa-superio.c
Date: Wed, 2 Oct 2019 18:51:36 +0200 [thread overview]
Message-ID: <1570035113-56848-14-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1570035113-56848-1-git-send-email-pbonzini@redhat.com>
From: Thomas Huth <thuth@redhat.com>
Currently, isa-superio.c is always compiled as soon as CONFIG_ISA_BUS
is enabled. But there are also machines that have an ISA BUS without
any of the superio chips attached to it, so we should not compile
isa-superio.c in case we only compile a QEMU for such a machine.
Thus add a proper CONFIG_ISA_SUPERIO switch so that this file only gets
compiled when we really, really need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/isa/Kconfig | 10 +++++++---
hw/isa/Makefile.objs | 2 +-
hw/mips/Kconfig | 1 +
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/hw/isa/Kconfig b/hw/isa/Kconfig
index 6db0d79..98a2899 100644
--- a/hw/isa/Kconfig
+++ b/hw/isa/Kconfig
@@ -13,9 +13,13 @@ config I82378
select MC146818RTC
select PCSPK
-config PC87312
+config ISA_SUPERIO
bool
select ISA_BUS
+
+config PC87312
+ bool
+ select ISA_SUPERIO
select I8259
select I8254
select I8257
@@ -34,14 +38,14 @@ config PIIX4
config VT82C686
bool
- select ISA_BUS
+ select ISA_SUPERIO
select ACPI_SMBUS
select SERIAL_ISA
select FDC
config SMC37C669
bool
- select ISA_BUS
+ select ISA_SUPERIO
select SERIAL_ISA
select PARALLEL
select FDC
diff --git a/hw/isa/Makefile.objs b/hw/isa/Makefile.objs
index 9e106df..ff97485 100644
--- a/hw/isa/Makefile.objs
+++ b/hw/isa/Makefile.objs
@@ -1,5 +1,5 @@
common-obj-$(CONFIG_ISA_BUS) += isa-bus.o
-common-obj-$(CONFIG_ISA_BUS) += isa-superio.o
+common-obj-$(CONFIG_ISA_SUPERIO) += isa-superio.o
common-obj-$(CONFIG_APM) += apm.o
common-obj-$(CONFIG_I82378) += i82378.o
common-obj-$(CONFIG_PC87312) += pc87312.o
diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
index 62aa01b..2c2adbc 100644
--- a/hw/mips/Kconfig
+++ b/hw/mips/Kconfig
@@ -13,6 +13,7 @@ config R4K
config MALTA
bool
+ select ISA_SUPERIO
config MIPSSIM
bool
--
1.8.3.1
next prev parent reply other threads:[~2019-10-02 17:00 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 16:51 [PULL 00/30] Misc patches for 2010-10-02 Paolo Bonzini
2019-10-02 16:51 ` [PULL 01/30] tests/migration: Add a test for auto converge Paolo Bonzini
2019-10-02 16:51 ` [PULL 02/30] target/i386: handle filtered_features in a new function mark_unavailable_features Paolo Bonzini
2019-10-02 16:51 ` [PULL 03/30] target/i386: introduce generic feature dependency mechanism Paolo Bonzini
2019-10-02 16:51 ` [PULL 04/30] target/i386: expand feature words to 64 bits Paolo Bonzini
2019-10-02 16:51 ` [PULL 05/30] target/i386: add VMX definitions Paolo Bonzini
2019-10-02 16:51 ` [PULL 06/30] vmxcap: correct the name of the variables Paolo Bonzini
2019-10-02 16:51 ` [PULL 07/30] target/i386: add VMX features Paolo Bonzini
2019-10-02 16:51 ` [PULL 08/30] target/i386: work around KVM_GET_MSRS bug for secondary execution controls Paolo Bonzini
2019-10-02 16:51 ` [PULL 09/30] target/i386/kvm: Silence warning from Valgrind about uninitialized bytes Paolo Bonzini
2019-10-02 16:51 ` [PULL 10/30] qemu-pr-helper: fix crash in mpath_reconstruct_sense Paolo Bonzini
2019-10-02 16:51 ` [PULL 11/30] replay: don't synchronize memory operations in replay mode Paolo Bonzini
2019-10-02 16:51 ` [PULL 12/30] Makefile: Remove generated files when doing 'distclean' Paolo Bonzini
2019-10-04 12:20 ` Peter Maydell
2019-10-04 16:48 ` Paolo Bonzini
2019-10-07 6:28 ` Thomas Huth
2019-10-07 7:13 ` Aleksandar Markovic
2019-10-02 16:51 ` Paolo Bonzini [this message]
2019-10-02 16:51 ` [PULL 14/30] ide: fix leak from qemu_allocate_irqs Paolo Bonzini
2019-10-02 16:51 ` [PULL 15/30] microblaze: fix leak of fdevice tree blob Paolo Bonzini
2019-10-02 16:51 ` [PULL 16/30] mcf5208: fix leak from qemu_allocate_irqs Paolo Bonzini
2019-10-02 16:51 ` [PULL 17/30] hppa: fix leak from g_strdup_printf Paolo Bonzini
2019-10-02 16:51 ` [PULL 18/30] mips: fix memory leaks in board initialization Paolo Bonzini
2019-10-02 16:51 ` [PULL 19/30] cris: do not leak struct cris_disasm_data Paolo Bonzini
2019-10-02 16:51 ` [PULL 20/30] lm32: do not leak memory on object_new/object_unref Paolo Bonzini
2019-10-02 16:51 ` [PULL 21/30] docker: test-debug: disable LeakSanitizer Paolo Bonzini
2019-10-02 16:51 ` [PULL 22/30] i386: Add CPUID bit for CLZERO and XSAVEERPTR Paolo Bonzini
2019-10-02 16:51 ` [PULL 23/30] vfio: Turn the container error into an Error handle Paolo Bonzini
2019-10-02 16:51 ` [PULL 24/30] memory: allow memory_region_register_iommu_notifier() to fail Paolo Bonzini
2019-10-02 16:51 ` [PULL 25/30] Fix wrong behavior of cpu_memory_rw_debug() function in SMM Paolo Bonzini
2019-10-07 8:29 ` Laszlo Ersek
2019-10-02 16:51 ` [PULL 26/30] util: WSAEWOULDBLOCK on connect should map to EINPROGRESS Paolo Bonzini
2019-10-02 16:51 ` [PULL 27/30] tests: skip serial test on windows Paolo Bonzini
2019-10-02 16:51 ` [PULL 28/30] win32: work around main-loop busy loop on socket/fd event Paolo Bonzini
2019-10-02 16:51 ` [PULL 29/30] tests/docker: only enable ubsan for test-clang Paolo Bonzini
2019-10-02 16:51 ` [PULL 30/30] accel/kvm: ensure ret always set Paolo Bonzini
2019-10-02 18:29 ` [PULL 00/30] Misc patches for 2010-10-02 no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570035113-56848-14-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.