From: "Toke Høiland-Jørgensen" <toke@redhat.com> To: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org, make-wifi-fast@lists.bufferbloat.net, ath10k@lists.infradead.org, John Crispin <john@phrozen.org>, Lorenzo Bianconi <lorenzo@kernel.org>, Felix Fietkau <nbd@nbd.name>, Kan Yan <kyan@google.com>, Rajkumar Manoharan <rmanohar@codeaurora.org>, Kevin Hayes <kevinhayes@google.com> Subject: [PATCH v2 1/4] mac80211: Rearrange ieee80211_tx_info to make room for tx_time_est Date: Tue, 15 Oct 2019 19:18:58 +0200 [thread overview] Message-ID: <157115993866.2500430.13989567853855880476.stgit@toke.dk> (raw) In-Reply-To: <157115993755.2500430.12214017471129215800.stgit@toke.dk> From: Toke Høiland-Jørgensen <toke@redhat.com> To implement airtime queue limiting, we need to keep a running account of the estimated airtime of all skbs queued into the device. Do to this correctly, we need to store the airtime estimate into the skb so we can decrease the outstanding balance when the skb is freed. This means that the time estimate must be stored somewhere that will survive for the lifetime of the skb. Fortunately, we had a couple of bytes left in the 'status' field in the ieee80211_tx_info; and since we only plan to calculate the airtime estimate after the skb is dequeued from the FQ structure, on the control side we can share the space with the codel enqueue time. And by rearranging the order of elements it is possible to have the position of the new tx_time_est line up between the control and status structs, so the value will survive from when mac80211 hands the packet to the driver, and until the driver either frees it, or hands it back through TX status. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> --- include/net/mac80211.h | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d69081c38788..49f8ea0af5f8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -975,20 +975,23 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) * @control.short_preamble: use short preamble (CCK only) * @control.skip_table: skip externally configured rate table * @control.jiffies: timestamp for expiry on powersave clients + * @control.enqueue_time: enqueue time (for iTXQs) + * @control.tx_time_est: estimated airtime usage (shared with @status) + * @control.reserved: unused field to ensure alignment of data structure + * @control.flags: control flags, see &enum mac80211_tx_control_flags * @control.vif: virtual interface (may be NULL) * @control.hw_key: key to encrypt with (may be NULL) - * @control.flags: control flags, see &enum mac80211_tx_control_flags - * @control.enqueue_time: enqueue time (for iTXQs) * @driver_rates: alias to @control.rates to reserve space * @pad: padding * @rate_driver_data: driver use area if driver needs @control.rates * @status: union part for status data * @status.rates: attempted rates * @status.ack_signal: ACK signal + * @status.tx_time_est: estimated airtime of skb (shared with @control) + * @status.tx_time: actual airtime consumed for transmission * @status.ampdu_ack_len: AMPDU ack length * @status.ampdu_len: AMPDU length * @status.antenna: (legacy, kept only for iwlegacy) - * @status.tx_time: airtime consumed for transmission * @status.is_valid_ack_signal: ACK signal is valid * @status.status_driver_data: driver use area * @ack: union part for pure ACK data @@ -1026,11 +1029,17 @@ struct ieee80211_tx_info { /* only needed before rate control */ unsigned long jiffies; }; + union { + codel_time_t enqueue_time; + struct { + u16 tx_time_est; /* shared with status */ + u16 reserved; /* padding for alignment */ + }; + }; + u32 flags; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; - u32 flags; - codel_time_t enqueue_time; } control; struct { u64 cookie; @@ -1038,12 +1047,13 @@ struct ieee80211_tx_info { struct { struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; s32 ack_signal; + u16 tx_time_est; /* shared with control */ + u16 tx_time; u8 ampdu_ack_len; u8 ampdu_len; u8 antenna; - u16 tx_time; bool is_valid_ack_signal; - void *status_driver_data[19 / sizeof(void *)]; + void *status_driver_data[16 / sizeof(void *)]; } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -1126,6 +1136,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) offsetof(struct ieee80211_tx_info, control.rates)); BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, control.tx_time_est) != + offsetof(struct ieee80211_tx_info, status.tx_time_est)); BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); /* clear the rate counts */ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
WARNING: multiple messages have this Message-ID (diff)
From: "Toke Høiland-Jørgensen" <toke@redhat.com> To: Johannes Berg <johannes@sipsolutions.net> Cc: Kan Yan <kyan@google.com>, Rajkumar Manoharan <rmanohar@codeaurora.org>, Kevin Hayes <kevinhayes@google.com>, make-wifi-fast@lists.bufferbloat.net, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org, John Crispin <john@phrozen.org>, Lorenzo Bianconi <lorenzo@kernel.org>, Felix Fietkau <nbd@nbd.name> Subject: [PATCH v2 1/4] mac80211: Rearrange ieee80211_tx_info to make room for tx_time_est Date: Tue, 15 Oct 2019 19:18:58 +0200 [thread overview] Message-ID: <157115993866.2500430.13989567853855880476.stgit@toke.dk> (raw) In-Reply-To: <157115993755.2500430.12214017471129215800.stgit@toke.dk> From: Toke Høiland-Jørgensen <toke@redhat.com> To implement airtime queue limiting, we need to keep a running account of the estimated airtime of all skbs queued into the device. Do to this correctly, we need to store the airtime estimate into the skb so we can decrease the outstanding balance when the skb is freed. This means that the time estimate must be stored somewhere that will survive for the lifetime of the skb. Fortunately, we had a couple of bytes left in the 'status' field in the ieee80211_tx_info; and since we only plan to calculate the airtime estimate after the skb is dequeued from the FQ structure, on the control side we can share the space with the codel enqueue time. And by rearranging the order of elements it is possible to have the position of the new tx_time_est line up between the control and status structs, so the value will survive from when mac80211 hands the packet to the driver, and until the driver either frees it, or hands it back through TX status. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> --- include/net/mac80211.h | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d69081c38788..49f8ea0af5f8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -975,20 +975,23 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) * @control.short_preamble: use short preamble (CCK only) * @control.skip_table: skip externally configured rate table * @control.jiffies: timestamp for expiry on powersave clients + * @control.enqueue_time: enqueue time (for iTXQs) + * @control.tx_time_est: estimated airtime usage (shared with @status) + * @control.reserved: unused field to ensure alignment of data structure + * @control.flags: control flags, see &enum mac80211_tx_control_flags * @control.vif: virtual interface (may be NULL) * @control.hw_key: key to encrypt with (may be NULL) - * @control.flags: control flags, see &enum mac80211_tx_control_flags - * @control.enqueue_time: enqueue time (for iTXQs) * @driver_rates: alias to @control.rates to reserve space * @pad: padding * @rate_driver_data: driver use area if driver needs @control.rates * @status: union part for status data * @status.rates: attempted rates * @status.ack_signal: ACK signal + * @status.tx_time_est: estimated airtime of skb (shared with @control) + * @status.tx_time: actual airtime consumed for transmission * @status.ampdu_ack_len: AMPDU ack length * @status.ampdu_len: AMPDU length * @status.antenna: (legacy, kept only for iwlegacy) - * @status.tx_time: airtime consumed for transmission * @status.is_valid_ack_signal: ACK signal is valid * @status.status_driver_data: driver use area * @ack: union part for pure ACK data @@ -1026,11 +1029,17 @@ struct ieee80211_tx_info { /* only needed before rate control */ unsigned long jiffies; }; + union { + codel_time_t enqueue_time; + struct { + u16 tx_time_est; /* shared with status */ + u16 reserved; /* padding for alignment */ + }; + }; + u32 flags; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; - u32 flags; - codel_time_t enqueue_time; } control; struct { u64 cookie; @@ -1038,12 +1047,13 @@ struct ieee80211_tx_info { struct { struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; s32 ack_signal; + u16 tx_time_est; /* shared with control */ + u16 tx_time; u8 ampdu_ack_len; u8 ampdu_len; u8 antenna; - u16 tx_time; bool is_valid_ack_signal; - void *status_driver_data[19 / sizeof(void *)]; + void *status_driver_data[16 / sizeof(void *)]; } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -1126,6 +1136,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) offsetof(struct ieee80211_tx_info, control.rates)); BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, control.tx_time_est) != + offsetof(struct ieee80211_tx_info, status.tx_time_est)); BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); /* clear the rate counts */ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2019-10-15 17:19 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-15 17:18 [PATCH v2 0/4] Add Airtime Queue Limits (AQL) to mac80211 Toke Høiland-Jørgensen 2019-10-15 17:18 ` Toke Høiland-Jørgensen 2019-10-15 17:18 ` Toke Høiland-Jørgensen [this message] 2019-10-15 17:18 ` [PATCH v2 1/4] mac80211: Rearrange ieee80211_tx_info to make room for tx_time_est Toke Høiland-Jørgensen 2019-10-18 0:50 ` Kan Yan 2019-10-18 0:50 ` Kan Yan 2019-10-18 10:15 ` Toke Høiland-Jørgensen 2019-10-18 10:15 ` Toke Høiland-Jørgensen 2019-10-18 12:21 ` Johannes Berg 2019-10-18 12:21 ` Johannes Berg 2019-10-18 13:31 ` Toke Høiland-Jørgensen 2019-10-18 13:31 ` Toke Høiland-Jørgensen 2019-10-18 13:48 ` Johannes Berg 2019-10-18 13:48 ` Johannes Berg 2019-10-18 14:01 ` Toke Høiland-Jørgensen 2019-10-18 14:01 ` Toke Høiland-Jørgensen 2019-10-18 14:07 ` Johannes Berg 2019-10-18 14:07 ` Johannes Berg 2019-10-18 14:22 ` Toke Høiland-Jørgensen 2019-10-18 14:22 ` Toke Høiland-Jørgensen 2019-10-18 14:14 ` Johannes Berg 2019-10-18 14:14 ` Johannes Berg 2019-10-18 14:30 ` Toke Høiland-Jørgensen 2019-10-18 14:30 ` Toke Høiland-Jørgensen 2019-10-18 12:35 ` Johannes Berg 2019-10-18 12:35 ` Johannes Berg 2019-10-18 13:01 ` Ben Greear 2019-10-18 13:01 ` Ben Greear 2019-10-15 17:18 ` [PATCH v2 2/4] mac80211: Import airtime calculation code from mt76 Toke Høiland-Jørgensen 2019-10-15 17:18 ` Toke Høiland-Jørgensen 2019-10-15 17:19 ` [PATCH v2 3/4] mac80211: Implement Airtime-based Queue Limit (AQL) Toke Høiland-Jørgensen 2019-10-15 17:19 ` Toke Høiland-Jørgensen 2019-10-15 17:19 ` [PATCH v2 4/4] mac80211: Use Airtime-based Queue Limits (AQL) on packet dequeue Toke Høiland-Jørgensen 2019-10-15 17:19 ` Toke Høiland-Jørgensen 2019-10-17 0:33 ` Kan Yan 2019-10-17 0:33 ` Kan Yan 2019-10-17 9:44 ` Toke Høiland-Jørgensen 2019-10-17 9:44 ` Toke Høiland-Jørgensen 2019-10-17 9:57 ` [Make-wifi-fast] " Sebastian Moeller 2019-10-17 9:57 ` Sebastian Moeller 2019-10-17 10:24 ` Toke Høiland-Jørgensen 2019-10-17 10:24 ` Toke Høiland-Jørgensen 2019-10-17 10:25 ` Sebastian Moeller 2019-10-17 10:25 ` Sebastian Moeller 2019-10-18 1:11 ` Kan Yan 2019-10-18 1:11 ` Kan Yan 2019-10-18 14:15 ` Johannes Berg 2019-10-18 14:15 ` Johannes Berg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=157115993866.2500430.13989567853855880476.stgit@toke.dk \ --to=toke@redhat.com \ --cc=ath10k@lists.infradead.org \ --cc=johannes@sipsolutions.net \ --cc=john@phrozen.org \ --cc=kevinhayes@google.com \ --cc=kyan@google.com \ --cc=linux-wireless@vger.kernel.org \ --cc=lorenzo@kernel.org \ --cc=make-wifi-fast@lists.bufferbloat.net \ --cc=nbd@nbd.name \ --cc=rmanohar@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.