All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Len Brown <lenb@kernel.org>, Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>,
	linux-acpi@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ACPI / scan: Create platform device for BSG2150 ACPI nodes
Date: Thu, 20 Dec 2018 21:59:51 +0100	[thread overview]
Message-ID: <1571328.CfEAWKtrWq@aspire.rjw.lan> (raw)
In-Reply-To: <20181220143451.25962-2-hdegoede@redhat.com>

On Thursday, December 20, 2018 3:34:51 PM CET Hans de Goede wrote:
> The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
> a HID of BSG2150 describing the 2 Bosch sensors used in the device a
> BMC150 compatible accelerometer and a BMC150 compatible magnetometer.
> 
> The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
> but this seems to be a copy and paste job from the BSG1160 firmware node
> on other devices, since there is no i2c-client listening to the 0x68
> address listed in the third resource and the 0x68 address is identical
> to the address of the third resource in the BSG1160 nodes, where as the
> other 2 addresses are different.
> 
> Add the ID to the I2C multi instantiate list, so that the
> i2c-multi-instantiate.c driver can handle it;
> 
> And add the necessary info to the i2c-multi-instantiate.c driver to
> enumerate all I2C slaves correctly.
> 
> To avoid triggering the:
> 
>         if (i < multi->num_clients) {
>                 dev_err(dev, "Error finding driver, idx %d\n", i);
> 
> Error this commit lists the 3th device in the i2c_inst_data with a
> type of "bsg2150_dummy_dev".
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
>  drivers/acpi/scan.c                          | 1 +
>  drivers/platform/x86/i2c-multi-instantiate.c | 9 +++++++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index e9eda5558c1f..d5b981cafaf8 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1540,6 +1540,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
>  	 */
>  	static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
>  		{"BSG1160", },
> +		{"BSG2150", },
>  		{"INT33FE", },
>  		{"INT3515", },
>  		{}
> diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/i2c-multi-instantiate.c
> index 3d893e0ac250..197d8a192721 100644
> --- a/drivers/platform/x86/i2c-multi-instantiate.c
> +++ b/drivers/platform/x86/i2c-multi-instantiate.c
> @@ -159,6 +159,14 @@ static const struct i2c_inst_data bsg1160_data[]  = {
>  	{}
>  };
>  
> +static const struct i2c_inst_data bsg2150_data[]  = {
> +	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> +	{ "bmc150_magn" },
> +	/* The resources describe a 3th client, but it is not really there. */
> +	{ "bsg2150_dummy_dev" },
> +	{}
> +};
> +
>  static const struct i2c_inst_data int3515_data[]  = {
>  	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
>  	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
> @@ -173,6 +181,7 @@ static const struct i2c_inst_data int3515_data[]  = {
>   */
>  static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
>  	{ "BSG1160", (unsigned long)bsg1160_data },
> +	{ "BSG2150", (unsigned long)bsg2150_data },
>  	{ "INT3515", (unsigned long)int3515_data },
>  	{ }
>  };
> 

  reply	other threads:[~2018-12-20 20:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-20 14:34 [PATCH 0/1] ACPI / scan: Create platform device for BSG2150 ACPI nodes Hans de Goede
2018-12-20 14:34 ` [PATCH] " Hans de Goede
2018-12-20 20:59   ` Rafael J. Wysocki [this message]
2019-02-05 15:55 ` [PATCH 0/1] " Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1571328.CfEAWKtrWq@aspire.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=andy@infradead.org \
    --cc=dvhart@infradead.org \
    --cc=hdegoede@redhat.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.