[dpdk-dev] [PATCH 04/19] net/mlx5: support meter profile operations

[Suanming Mou <suanmingm@mellanox.com>]

This commit add the support of meter profile add and delete operations.

New internal functions in rte_mtr_ops callback:
1. meter_profile_add()
2. meter_profile_delete()

Only RTE_MTR_SRTCM_RFC2697 algorithm is supported and can be added. To
add other algorithm will report an error.

Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
---
 drivers/net/mlx5/Makefile          |   1 +
 drivers/net/mlx5/mlx5.c            |   1 +
 drivers/net/mlx5/mlx5.h            |   4 +
 drivers/net/mlx5/mlx5_flow.h       |  29 +++++
 drivers/net/mlx5/mlx5_flow_meter.c | 245 ++++++++++++++++++++++++++++++++++++-
 5 files changed, 278 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
index c60f97c..e8d6195 100644
--- a/drivers/net/mlx5/Makefile
+++ b/drivers/net/mlx5/Makefile
@@ -63,6 +63,7 @@ LDLIBS += $(shell $(RTE_SDK)/buildtools/options-ibverbs-static.sh)
 else
 LDLIBS += -libverbs -lmlx5
 endif
+LDLIBS += -lm
 LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
 LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
 LDLIBS += -lrte_bus_pci
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index ebe748b..7958067 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -2405,6 +2405,7 @@ struct mlx5_flow_id_pool *
 		mlx5_nl_mac_addr_sync(eth_dev);
 	TAILQ_INIT(&priv->flows);
 	TAILQ_INIT(&priv->ctrl_flows);
+	TAILQ_INIT(&priv->flow_meter_profiles);
 	/* Hint libmlx5 to use PMD allocator for data plane resources */
 	struct mlx5dv_ctx_allocators alctr = {
 		.alloc = &mlx5_alloc_verbs_buf,
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 650f2d1..b1d5341 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -682,6 +682,9 @@ struct mlx5_proc_priv {
 	/* Table of UAR registers for each process. */
 };
 
+/* MTR profile list. */
+TAILQ_HEAD(mlx5_mtr_profiles, mlx5_flow_meter_profile);
+
 #define MLX5_PROC_PRIV(port_id) \
 	((struct mlx5_proc_priv *)rte_eth_devices[port_id].process_private)
 
@@ -752,6 +755,7 @@ struct mlx5_priv {
 	/* Hash table of Rx metadata register copy table. */
 	uint8_t mtr_sfx_reg; /* Meter prefix-suffix flow match REG_C. */
 	uint8_t mtr_color_reg; /* Meter color match REG_C. */
+	struct mlx5_mtr_profiles flow_meter_profiles; /* MTR profile list. */
 #ifndef RTE_ARCH_64
 	rte_spinlock_t uar_lock_cq; /* CQs share a common distinct UAR */
 	rte_spinlock_t uar_lock[MLX5_UAR_PAGE_NUM_MAX];
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index 1ca7dd9..922d6b6 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -23,6 +23,7 @@
 
 #include <rte_atomic.h>
 #include <rte_alarm.h>
+#include <rte_mtr.h>
 
 #include "mlx5.h"
 #include "mlx5_prm.h"
@@ -522,6 +523,34 @@ struct mlx5_flow {
 	bool external; /**< true if the flow is created external to PMD. */
 };
 
+#define MLX5_MAN_WIDTH 8
+
+/* RFC2697 parameter structure. */
+struct mlx5_flow_meter_srtcm_rfc2697_prm {
+	/* green_saturation_value = cbs_mantissa * 2^cbs_exponent */
+	uint32_t cbs_exponent:5;
+	uint32_t cbs_mantissa:8;
+	/* cir = 8G * cir_mantissa * 1/(2^cir_exponent) Bytes/Sec */
+	uint32_t cir_exponent:5;
+	uint32_t cir_mantissa:8;
+	/* yellow _saturation_value = ebs_mantissa * 2^ebs_exponent */
+	uint32_t ebs_exponent:5;
+	uint32_t ebs_mantissa:8;
+};
+
+/* Flow meter profile structure. */
+struct mlx5_flow_meter_profile {
+	TAILQ_ENTRY(mlx5_flow_meter_profile) next;
+	/**< Pointer to the next flow meter structure. */
+	uint32_t meter_profile_id; /**< Profile id. */
+	struct rte_mtr_meter_profile profile; /**< Profile detail. */
+	union {
+		struct mlx5_flow_meter_srtcm_rfc2697_prm srtcm_prm;
+		/**< srtcm_rfc2697 struct. */
+	};
+	uint32_t ref_cnt; /**< Use count. */
+};
+
 /* Flow structure. */
 struct rte_flow {
 	TAILQ_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
diff --git a/drivers/net/mlx5/mlx5_flow_meter.c b/drivers/net/mlx5/mlx5_flow_meter.c
index 9103b6d..b11962f 100644
--- a/drivers/net/mlx5/mlx5_flow_meter.c
+++ b/drivers/net/mlx5/mlx5_flow_meter.c
@@ -4,6 +4,7 @@
  */
 #include <math.h>
 
+#include <rte_malloc.h>
 #include <rte_mtr.h>
 #include <rte_mtr_driver.h>
 
@@ -11,6 +12,150 @@
 #include "mlx5_flow.h"
 
 /**
+ * Find meter profile by id.
+ *
+ * @param priv
+ *   Pointer to mlx5_priv.
+ * @param meter_profile_id
+ *   Meter profile id.
+ *
+ * @return
+ *   Pointer to the profile found on success, NULL otherwise.
+ */
+static struct mlx5_flow_meter_profile *
+mlx5_flow_meter_profile_find(struct mlx5_priv *priv, uint32_t meter_profile_id)
+{
+	struct mlx5_mtr_profiles *fmps = &priv->flow_meter_profiles;
+	struct mlx5_flow_meter_profile *fmp;
+
+	TAILQ_FOREACH(fmp, fmps, next)
+		if (meter_profile_id == fmp->meter_profile_id)
+			return fmp;
+	return NULL;
+}
+
+/**
+ * Calculate mantissa and exponent for cir.
+ *
+ * @param[in] cir
+ *   Value to be calculated.
+ * @param[out] man
+ *   Pointer to the mantissa.
+ * @param[out] exp
+ *   Pointer to the exp.
+ */
+static void
+mlx5_flow_meter_cir_man_exp_calc(int64_t cir, uint8_t *man, uint8_t *exp)
+{
+	int64_t _cir;
+	int64_t delta = INT64_MAX;
+	uint8_t _man = 0;
+	uint8_t _exp = 0;
+	uint64_t m, e;
+
+	for (m = 0; m <= 0xFF; m++) { /* man width 8 bit */
+		for (e = 0; e <= 0x1F; e++) { /* exp width 5bit */
+			_cir = (1000000000ULL * m) >> e;
+			if (llabs(cir - _cir) <= delta) {
+				delta = llabs(cir - _cir);
+				_man = m;
+				_exp = e;
+			}
+		}
+	}
+	*man = _man;
+	*exp = _exp;
+}
+
+/**
+ * Calculate mantissa and exponent for xbs.
+ *
+ * @param[in] xbs
+ *   Value to be calculated.
+ * @param[out] man
+ *   Pointer to the mantissa.
+ * @param[out] exp
+ *   Pointer to the exp.
+ */
+static void
+mlx5_flow_meter_xbs_man_exp_calc(uint64_t xbs, uint8_t *man, uint8_t *exp)
+{
+	int _exp;
+	double _man;
+
+	/* Special case xbs == 0 ? both exp and matissa are 0. */
+	if (xbs == 0) {
+		*man = 0;
+		*exp = 0;
+		return;
+	}
+	/* xbs = xbs_mantissa * 2^xbs_exponent */
+	_man = frexp(xbs, &_exp);
+	_man = _man * pow(2, MLX5_MAN_WIDTH);
+	_exp = _exp - MLX5_MAN_WIDTH;
+	*man = (uint8_t)ceil(_man);
+	*exp = _exp;
+}
+
+/**
+ * Fill the prm meter parameter.
+ *
+ * @param[in,out] fmp
+ *   Pointer to meter profie to be converted.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_param_fill(struct mlx5_flow_meter_profile *fmp,
+			  struct rte_mtr_error *error)
+{
+	struct mlx5_flow_meter_srtcm_rfc2697_prm *srtcm = &fmp->srtcm_prm;
+	uint8_t man, exp;
+
+	if (fmp->profile.alg != RTE_MTR_SRTCM_RFC2697)
+		return -rte_mtr_error_set(error, ENOTSUP,
+				RTE_MTR_ERROR_TYPE_METER_PROFILE,
+				NULL, "Metering algorithm not supported.");
+	 /* cbs = cbs_mantissa * 2^cbs_exponent */
+	mlx5_flow_meter_xbs_man_exp_calc(fmp->profile.srtcm_rfc2697.cbs,
+				    &man, &exp);
+	srtcm->cbs_mantissa = man;
+	srtcm->cbs_exponent = exp;
+	/* Check if cbs mantissa is too large. */
+	if (srtcm->cbs_exponent != exp)
+		return -rte_mtr_error_set(error, EINVAL,
+					  RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+					  "Metering profile parameter cbs is"
+					  " invalid.");
+	/* ebs = ebs_mantissa * 2^ebs_exponent */
+	mlx5_flow_meter_xbs_man_exp_calc(fmp->profile.srtcm_rfc2697.ebs,
+				    &man, &exp);
+	srtcm->ebs_mantissa = man;
+	srtcm->ebs_exponent = exp;
+	/* Check if ebs mantissa is too large. */
+	if (srtcm->ebs_exponent != exp)
+		return -rte_mtr_error_set(error, EINVAL,
+					  RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+					  "Metering profile parameter ebs is"
+					  " invalid.");
+	/* cir = 8G * cir_mantissa * 1/(2^cir_exponent)) Bytes/Sec */
+	mlx5_flow_meter_cir_man_exp_calc(fmp->profile.srtcm_rfc2697.cir,
+				    &man, &exp);
+	srtcm->cir_mantissa = man;
+	srtcm->cir_exponent = exp;
+	/* Check if cir mantissa is too large. */
+	if (srtcm->cir_exponent != exp)
+		return -rte_mtr_error_set(error, EINVAL,
+					  RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+					  "Metering profile parameter cir is"
+					  " invalid.");
+	return 0;
+}
+
+/**
  * Callback to get MTR capabilities.
  *
  * @param[in] dev
@@ -51,10 +196,106 @@
 	return 0;
 }
 
+/**
+ * Callback to add MTR profile.
+ *
+ * @param[in] dev
+ *   Pointer to Ethernet device.
+ * @param[in] meter_profile_id
+ *   Meter profile id.
+ * @param[in] profile
+ *   Pointer to meter profile detail.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_profile_add(struct rte_eth_dev *dev,
+		       uint32_t meter_profile_id,
+		       struct rte_mtr_meter_profile *profile,
+		       struct rte_mtr_error *error)
+{
+	struct mlx5_priv *priv = dev->data->dev_private;
+	struct mlx5_mtr_profiles *fmps = &priv->flow_meter_profiles;
+	struct mlx5_flow_meter_profile *fmp;
+	int ret;
+
+	if (!priv->mtr_en)
+		return -rte_mtr_error_set(error, ENOTSUP,
+					  RTE_MTR_ERROR_TYPE_UNSPECIFIED, NULL,
+					  "Meter is not support");
+	/* Meter profile memory allocation. */
+	fmp = rte_calloc(__func__, 1, sizeof(struct mlx5_flow_meter_profile),
+			 RTE_CACHE_LINE_SIZE);
+	if (fmp == NULL)
+		return -rte_mtr_error_set(error, ENOMEM,
+					  RTE_MTR_ERROR_TYPE_UNSPECIFIED,
+					  NULL, "Meter profile memory "
+					  "alloc failed.");
+	/* Fill profile info. */
+	fmp->meter_profile_id = meter_profile_id;
+	fmp->profile = *profile;
+	/* Fill the flow meter parameters for the PRM. */
+	ret = mlx5_flow_meter_param_fill(fmp, error);
+	if (ret)
+		goto error;
+	/* Add to list. */
+	TAILQ_INSERT_TAIL(fmps, fmp, next);
+	return 0;
+error:
+	rte_free(fmp);
+	return ret;
+}
+
+/**
+ * Callback to delete MTR profile.
+ *
+ * @param[in] dev
+ *   Pointer to Ethernet device.
+ * @param[in] meter_profile_id
+ *   Meter profile id.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_profile_delete(struct rte_eth_dev *dev,
+			  uint32_t meter_profile_id,
+			  struct rte_mtr_error *error)
+{
+	struct mlx5_priv *priv = dev->data->dev_private;
+	struct mlx5_flow_meter_profile *fmp;
+
+	if (!priv->mtr_en)
+		return -rte_mtr_error_set(error, ENOTSUP,
+					  RTE_MTR_ERROR_TYPE_UNSPECIFIED, NULL,
+					  "Meter is not support");
+	/* Meter profile must exist. */
+	fmp = mlx5_flow_meter_profile_find(priv, meter_profile_id);
+	if (fmp == NULL)
+		return -rte_mtr_error_set(error, ENOENT,
+					  RTE_MTR_ERROR_TYPE_METER_PROFILE_ID,
+					  &meter_profile_id,
+					  "Meter profile id invalid.");
+	/* Check profile is unused. */
+	if (fmp->ref_cnt)
+		return -rte_mtr_error_set(error, EBUSY,
+					  RTE_MTR_ERROR_TYPE_METER_PROFILE_ID,
+					  NULL, "Meter profile in use.");
+	/* Remove from list. */
+	TAILQ_REMOVE(&priv->flow_meter_profiles, fmp, next);
+	rte_free(fmp);
+	return 0;
+}
+
 static const struct rte_mtr_ops mlx5_flow_mtr_ops = {
 	.capabilities_get = mlx5_flow_mtr_cap_get,
-	.meter_profile_add = NULL,
-	.meter_profile_delete = NULL,
+	.meter_profile_add = mlx5_flow_meter_profile_add,
+	.meter_profile_delete = mlx5_flow_meter_profile_delete,
 	.create = NULL,
 	.destroy = NULL,
 	.meter_enable = NULL,
-- 
1.8.3.1