[PATCH v2 0/7] drm/mediatek: Refactor plane init/check and support rotation

[PATCH v2 0/7] drm/mediatek: Refactor plane init/check and support rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Hello,
This is a follow-on to [1], which supports the original Y-flip. I've
added X-flip and 180 degree rotate. Additionally, the rotation property
is only exposed for ovl planes, not rdma planes since rdma doesn't
support it. In order to differentiate between the two types, I had to
do some plumbing in order to surface the supported rotations of a
component as well as allowing a component to implement plane checks.

I've tested this on a 4.19 kernel on mt8183. The set was then forward
ported to mainline and build tested. The forward port was relatively
collision free, but there were a few.

Sean

[1]- https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html


Sean Paul (7):
  drm/mediatek: Refactor plane init
  drm/mediatek: Add helper to get component for a plane
  drm/mediatek: Add plumbing for layer_check hook
  drm/mediatek: Plumb supported rotation values from components to plane
    init
  drm/mediatek: Support reflect-y plane rotation
  drm/mediatek: Support reflect-x plane rotation
  drm/mediatek: Support 180 degree rotation

 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  50 +++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 145 ++++++++++++++------
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |   2 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  22 +++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  18 ++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |   4 +-
 6 files changed, 199 insertions(+), 42 deletions(-)

-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 0/7] drm/mediatek: Refactor plane init/check and support rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Hello,
This is a follow-on to [1], which supports the original Y-flip. I've
added X-flip and 180 degree rotate. Additionally, the rotation property
is only exposed for ovl planes, not rdma planes since rdma doesn't
support it. In order to differentiate between the two types, I had to
do some plumbing in order to surface the supported rotations of a
component as well as allowing a component to implement plane checks.

I've tested this on a 4.19 kernel on mt8183. The set was then forward
ported to mainline and build tested. The forward port was relatively
collision free, but there were a few.

Sean

[1]- https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html


Sean Paul (7):
  drm/mediatek: Refactor plane init
  drm/mediatek: Add helper to get component for a plane
  drm/mediatek: Add plumbing for layer_check hook
  drm/mediatek: Plumb supported rotation values from components to plane
    init
  drm/mediatek: Support reflect-y plane rotation
  drm/mediatek: Support reflect-x plane rotation
  drm/mediatek: Support 180 degree rotation

 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  50 +++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 145 ++++++++++++++------
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |   2 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  22 +++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  18 ++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |   4 +-
 6 files changed, 199 insertions(+), 42 deletions(-)

-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 0/7] drm/mediatek: Refactor plane init/check and support rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Hello,
This is a follow-on to [1], which supports the original Y-flip. I've
added X-flip and 180 degree rotate. Additionally, the rotation property
is only exposed for ovl planes, not rdma planes since rdma doesn't
support it. In order to differentiate between the two types, I had to
do some plumbing in order to surface the supported rotations of a
component as well as allowing a component to implement plane checks.

I've tested this on a 4.19 kernel on mt8183. The set was then forward
ported to mainline and build tested. The forward port was relatively
collision free, but there were a few.

Sean

[1]- https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html


Sean Paul (7):
  drm/mediatek: Refactor plane init
  drm/mediatek: Add helper to get component for a plane
  drm/mediatek: Add plumbing for layer_check hook
  drm/mediatek: Plumb supported rotation values from components to plane
    init
  drm/mediatek: Support reflect-y plane rotation
  drm/mediatek: Support reflect-x plane rotation
  drm/mediatek: Support 180 degree rotation

 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  50 +++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 145 ++++++++++++++------
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |   2 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  22 +++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  18 ++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |   4 +-
 6 files changed, 199 insertions(+), 42 deletions(-)

-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 1/7] drm/mediatek: Refactor plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add a couple of functions which enumerate the number of planes for a
component and initialize the planes for a component.

No functional changes in this patch, but it will allow us to selectively
support rotation if the component supports it.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 77 +++++++++++++++++++------
 1 file changed, 59 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index b841d3706d8b..7d0f50da8e40 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -543,14 +543,63 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
 	mtk_drm_finish_page_flip(mtk_crtc);
 }
 
+static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
+					int comp_idx)
+{
+	struct mtk_ddp_comp *comp;
+
+	if (comp_idx > 1)
+		return 0;
+
+	comp = mtk_crtc->ddp_comp[comp_idx];
+	if (!comp->funcs)
+		return 0;
+
+	if (comp_idx == 1 && !comp->funcs->bgclr_in_on)
+		return 0;
+
+	return mtk_ddp_comp_layer_nr(comp);
+}
+
+static inline
+enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
+{
+	if (plane_idx == 0)
+		return DRM_PLANE_TYPE_PRIMARY;
+	else if (plane_idx == 1)
+		return DRM_PLANE_TYPE_CURSOR;
+	else
+		return DRM_PLANE_TYPE_OVERLAY;
+
+}
+
+static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
+					 struct mtk_drm_crtc *mtk_crtc,
+					 int comp_idx, int pipe)
+{
+	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	int i, ret;
+
+	for (i = 0; i < num_planes; i++) {
+		ret = mtk_plane_init(drm_dev,
+				&mtk_crtc->planes[mtk_crtc->layer_nr],
+				BIT(pipe),
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+		if (ret)
+			return ret;
+
+		mtk_crtc->layer_nr++;
+	}
+	return 0;
+}
+
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path, unsigned int path_len)
 {
 	struct mtk_drm_private *priv = drm_dev->dev_private;
 	struct device *dev = drm_dev->dev;
 	struct mtk_drm_crtc *mtk_crtc;
-	enum drm_plane_type type;
-	unsigned int zpos;
+	unsigned int num_comp_planes = 0;
 	int pipe = priv->num_pipes;
 	int ret;
 	int i;
@@ -606,23 +655,15 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 		mtk_crtc->ddp_comp[i] = comp;
 	}
 
-	mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
-	if (mtk_crtc->ddp_comp_nr > 1) {
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[1];
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
+		num_comp_planes += mtk_drm_crtc_num_comp_planes(mtk_crtc, i);
+
+	mtk_crtc->planes = devm_kcalloc(dev, num_comp_planes,
+					sizeof(struct drm_plane), GFP_KERNEL);
 
-		if (comp->funcs->bgclr_in_on)
-			mtk_crtc->layer_nr += mtk_ddp_comp_layer_nr(comp);
-	}
-	mtk_crtc->planes = devm_kcalloc(dev, mtk_crtc->layer_nr,
-					sizeof(struct drm_plane),
-					GFP_KERNEL);
-
-	for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
-		type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
-				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
-						DRM_PLANE_TYPE_OVERLAY;
-		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
-				     BIT(pipe), type);
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		ret = mtk_drm_crtc_init_comp_planes(drm_dev, mtk_crtc, i,
+						    pipe);
 		if (ret)
 			return ret;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 1/7] drm/mediatek: Refactor plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add a couple of functions which enumerate the number of planes for a
component and initialize the planes for a component.

No functional changes in this patch, but it will allow us to selectively
support rotation if the component supports it.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 77 +++++++++++++++++++------
 1 file changed, 59 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index b841d3706d8b..7d0f50da8e40 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -543,14 +543,63 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
 	mtk_drm_finish_page_flip(mtk_crtc);
 }
 
+static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
+					int comp_idx)
+{
+	struct mtk_ddp_comp *comp;
+
+	if (comp_idx > 1)
+		return 0;
+
+	comp = mtk_crtc->ddp_comp[comp_idx];
+	if (!comp->funcs)
+		return 0;
+
+	if (comp_idx == 1 && !comp->funcs->bgclr_in_on)
+		return 0;
+
+	return mtk_ddp_comp_layer_nr(comp);
+}
+
+static inline
+enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
+{
+	if (plane_idx == 0)
+		return DRM_PLANE_TYPE_PRIMARY;
+	else if (plane_idx == 1)
+		return DRM_PLANE_TYPE_CURSOR;
+	else
+		return DRM_PLANE_TYPE_OVERLAY;
+
+}
+
+static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
+					 struct mtk_drm_crtc *mtk_crtc,
+					 int comp_idx, int pipe)
+{
+	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	int i, ret;
+
+	for (i = 0; i < num_planes; i++) {
+		ret = mtk_plane_init(drm_dev,
+				&mtk_crtc->planes[mtk_crtc->layer_nr],
+				BIT(pipe),
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+		if (ret)
+			return ret;
+
+		mtk_crtc->layer_nr++;
+	}
+	return 0;
+}
+
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path, unsigned int path_len)
 {
 	struct mtk_drm_private *priv = drm_dev->dev_private;
 	struct device *dev = drm_dev->dev;
 	struct mtk_drm_crtc *mtk_crtc;
-	enum drm_plane_type type;
-	unsigned int zpos;
+	unsigned int num_comp_planes = 0;
 	int pipe = priv->num_pipes;
 	int ret;
 	int i;
@@ -606,23 +655,15 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 		mtk_crtc->ddp_comp[i] = comp;
 	}
 
-	mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
-	if (mtk_crtc->ddp_comp_nr > 1) {
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[1];
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
+		num_comp_planes += mtk_drm_crtc_num_comp_planes(mtk_crtc, i);
+
+	mtk_crtc->planes = devm_kcalloc(dev, num_comp_planes,
+					sizeof(struct drm_plane), GFP_KERNEL);
 
-		if (comp->funcs->bgclr_in_on)
-			mtk_crtc->layer_nr += mtk_ddp_comp_layer_nr(comp);
-	}
-	mtk_crtc->planes = devm_kcalloc(dev, mtk_crtc->layer_nr,
-					sizeof(struct drm_plane),
-					GFP_KERNEL);
-
-	for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
-		type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
-				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
-						DRM_PLANE_TYPE_OVERLAY;
-		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
-				     BIT(pipe), type);
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		ret = mtk_drm_crtc_init_comp_planes(drm_dev, mtk_crtc, i,
+						    pipe);
 		if (ret)
 			return ret;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/7] drm/mediatek: Refactor plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add a couple of functions which enumerate the number of planes for a
component and initialize the planes for a component.

No functional changes in this patch, but it will allow us to selectively
support rotation if the component supports it.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 77 +++++++++++++++++++------
 1 file changed, 59 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index b841d3706d8b..7d0f50da8e40 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -543,14 +543,63 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
 	mtk_drm_finish_page_flip(mtk_crtc);
 }
 
+static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
+					int comp_idx)
+{
+	struct mtk_ddp_comp *comp;
+
+	if (comp_idx > 1)
+		return 0;
+
+	comp = mtk_crtc->ddp_comp[comp_idx];
+	if (!comp->funcs)
+		return 0;
+
+	if (comp_idx == 1 && !comp->funcs->bgclr_in_on)
+		return 0;
+
+	return mtk_ddp_comp_layer_nr(comp);
+}
+
+static inline
+enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
+{
+	if (plane_idx == 0)
+		return DRM_PLANE_TYPE_PRIMARY;
+	else if (plane_idx == 1)
+		return DRM_PLANE_TYPE_CURSOR;
+	else
+		return DRM_PLANE_TYPE_OVERLAY;
+
+}
+
+static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
+					 struct mtk_drm_crtc *mtk_crtc,
+					 int comp_idx, int pipe)
+{
+	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	int i, ret;
+
+	for (i = 0; i < num_planes; i++) {
+		ret = mtk_plane_init(drm_dev,
+				&mtk_crtc->planes[mtk_crtc->layer_nr],
+				BIT(pipe),
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+		if (ret)
+			return ret;
+
+		mtk_crtc->layer_nr++;
+	}
+	return 0;
+}
+
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path, unsigned int path_len)
 {
 	struct mtk_drm_private *priv = drm_dev->dev_private;
 	struct device *dev = drm_dev->dev;
 	struct mtk_drm_crtc *mtk_crtc;
-	enum drm_plane_type type;
-	unsigned int zpos;
+	unsigned int num_comp_planes = 0;
 	int pipe = priv->num_pipes;
 	int ret;
 	int i;
@@ -606,23 +655,15 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 		mtk_crtc->ddp_comp[i] = comp;
 	}
 
-	mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
-	if (mtk_crtc->ddp_comp_nr > 1) {
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[1];
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
+		num_comp_planes += mtk_drm_crtc_num_comp_planes(mtk_crtc, i);
+
+	mtk_crtc->planes = devm_kcalloc(dev, num_comp_planes,
+					sizeof(struct drm_plane), GFP_KERNEL);
 
-		if (comp->funcs->bgclr_in_on)
-			mtk_crtc->layer_nr += mtk_ddp_comp_layer_nr(comp);
-	}
-	mtk_crtc->planes = devm_kcalloc(dev, mtk_crtc->layer_nr,
-					sizeof(struct drm_plane),
-					GFP_KERNEL);
-
-	for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
-		type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
-				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
-						DRM_PLANE_TYPE_OVERLAY;
-		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
-				     BIT(pipe), type);
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		ret = mtk_drm_crtc_init_comp_planes(drm_dev, mtk_crtc, i,
+						    pipe);
 		if (ret)
 			return ret;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 2/7] drm/mediatek: Add helper to get component for a plane

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Instead of hard-coding which components have planes, add a helper
function to walk the components and map a plane index to a component
layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 56 +++++++++++++++----------
 1 file changed, 34 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 7d0f50da8e40..ccf395f17a99 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -207,6 +207,28 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc *mtk_crtc)
 		clk_disable_unprepare(mtk_crtc->ddp_comp[i]->clk);
 }
 
+static
+struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
+						struct drm_plane *plane,
+						unsigned int *local_layer)
+{
+	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+	struct mtk_ddp_comp *comp;
+	int i, count = 0;
+
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		comp = mtk_crtc->ddp_comp[i];
+		if (plane->index < (count + mtk_ddp_comp_layer_nr(comp))) {
+			*local_layer = plane->index - count;
+			return comp;
+		}
+		count += mtk_ddp_comp_layer_nr(comp);
+	}
+
+	WARN(1, "Failed to find component for plane %d\n", plane->index);
+	return NULL;
+}
+
 static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 {
 	struct drm_crtc *crtc = &mtk_crtc->base;
@@ -283,19 +305,12 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 	for (i = 0; i < mtk_crtc->layer_nr; i++) {
 		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-		unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
+		struct mtk_ddp_comp *comp;
 		unsigned int local_layer;
 
 		plane_state = to_mtk_plane_state(plane->state);
-
-		if (i >= comp_layer_nr) {
-			comp = mtk_crtc->ddp_comp[1];
-			local_layer = i - comp_layer_nr;
-		} else
-			local_layer = i;
-		mtk_ddp_comp_layer_config(comp, local_layer,
-					  plane_state);
+		comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+		mtk_ddp_comp_layer_config(comp, local_layer, plane_state);
 	}
 
 	return 0;
@@ -343,7 +358,6 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
 	unsigned int i;
-	unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
 	unsigned int local_layer;
 
 	/*
@@ -366,17 +380,15 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 
 			plane_state = to_mtk_plane_state(plane->state);
 
-			if (plane_state->pending.config) {
-				if (i >= comp_layer_nr) {
-					comp = mtk_crtc->ddp_comp[1];
-					local_layer = i - comp_layer_nr;
-				} else
-					local_layer = i;
-
-				mtk_ddp_comp_layer_config(comp, local_layer,
-							  plane_state);
-				plane_state->pending.config = false;
-			}
+			if (!plane_state->pending.config)
+				continue;
+
+			comp = mtk_drm_ddp_comp_for_plane(crtc, plane,
+							  &local_layer);
+
+			mtk_ddp_comp_layer_config(comp, local_layer,
+						  plane_state);
+			plane_state->pending.config = false;
 		}
 		mtk_crtc->pending_planes = false;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 2/7] drm/mediatek: Add helper to get component for a plane

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Instead of hard-coding which components have planes, add a helper
function to walk the components and map a plane index to a component
layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 56 +++++++++++++++----------
 1 file changed, 34 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 7d0f50da8e40..ccf395f17a99 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -207,6 +207,28 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc *mtk_crtc)
 		clk_disable_unprepare(mtk_crtc->ddp_comp[i]->clk);
 }
 
+static
+struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
+						struct drm_plane *plane,
+						unsigned int *local_layer)
+{
+	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+	struct mtk_ddp_comp *comp;
+	int i, count = 0;
+
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		comp = mtk_crtc->ddp_comp[i];
+		if (plane->index < (count + mtk_ddp_comp_layer_nr(comp))) {
+			*local_layer = plane->index - count;
+			return comp;
+		}
+		count += mtk_ddp_comp_layer_nr(comp);
+	}
+
+	WARN(1, "Failed to find component for plane %d\n", plane->index);
+	return NULL;
+}
+
 static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 {
 	struct drm_crtc *crtc = &mtk_crtc->base;
@@ -283,19 +305,12 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 	for (i = 0; i < mtk_crtc->layer_nr; i++) {
 		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-		unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
+		struct mtk_ddp_comp *comp;
 		unsigned int local_layer;
 
 		plane_state = to_mtk_plane_state(plane->state);
-
-		if (i >= comp_layer_nr) {
-			comp = mtk_crtc->ddp_comp[1];
-			local_layer = i - comp_layer_nr;
-		} else
-			local_layer = i;
-		mtk_ddp_comp_layer_config(comp, local_layer,
-					  plane_state);
+		comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+		mtk_ddp_comp_layer_config(comp, local_layer, plane_state);
 	}
 
 	return 0;
@@ -343,7 +358,6 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
 	unsigned int i;
-	unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
 	unsigned int local_layer;
 
 	/*
@@ -366,17 +380,15 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 
 			plane_state = to_mtk_plane_state(plane->state);
 
-			if (plane_state->pending.config) {
-				if (i >= comp_layer_nr) {
-					comp = mtk_crtc->ddp_comp[1];
-					local_layer = i - comp_layer_nr;
-				} else
-					local_layer = i;
-
-				mtk_ddp_comp_layer_config(comp, local_layer,
-							  plane_state);
-				plane_state->pending.config = false;
-			}
+			if (!plane_state->pending.config)
+				continue;
+
+			comp = mtk_drm_ddp_comp_for_plane(crtc, plane,
+							  &local_layer);
+
+			mtk_ddp_comp_layer_config(comp, local_layer,
+						  plane_state);
+			plane_state->pending.config = false;
 		}
 		mtk_crtc->pending_planes = false;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/7] drm/mediatek: Add helper to get component for a plane

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Instead of hard-coding which components have planes, add a helper
function to walk the components and map a plane index to a component
layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 56 +++++++++++++++----------
 1 file changed, 34 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 7d0f50da8e40..ccf395f17a99 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -207,6 +207,28 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc *mtk_crtc)
 		clk_disable_unprepare(mtk_crtc->ddp_comp[i]->clk);
 }
 
+static
+struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
+						struct drm_plane *plane,
+						unsigned int *local_layer)
+{
+	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+	struct mtk_ddp_comp *comp;
+	int i, count = 0;
+
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		comp = mtk_crtc->ddp_comp[i];
+		if (plane->index < (count + mtk_ddp_comp_layer_nr(comp))) {
+			*local_layer = plane->index - count;
+			return comp;
+		}
+		count += mtk_ddp_comp_layer_nr(comp);
+	}
+
+	WARN(1, "Failed to find component for plane %d\n", plane->index);
+	return NULL;
+}
+
 static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 {
 	struct drm_crtc *crtc = &mtk_crtc->base;
@@ -283,19 +305,12 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 	for (i = 0; i < mtk_crtc->layer_nr; i++) {
 		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
-		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-		unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
+		struct mtk_ddp_comp *comp;
 		unsigned int local_layer;
 
 		plane_state = to_mtk_plane_state(plane->state);
-
-		if (i >= comp_layer_nr) {
-			comp = mtk_crtc->ddp_comp[1];
-			local_layer = i - comp_layer_nr;
-		} else
-			local_layer = i;
-		mtk_ddp_comp_layer_config(comp, local_layer,
-					  plane_state);
+		comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+		mtk_ddp_comp_layer_config(comp, local_layer, plane_state);
 	}
 
 	return 0;
@@ -343,7 +358,6 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
 	unsigned int i;
-	unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
 	unsigned int local_layer;
 
 	/*
@@ -366,17 +380,15 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 
 			plane_state = to_mtk_plane_state(plane->state);
 
-			if (plane_state->pending.config) {
-				if (i >= comp_layer_nr) {
-					comp = mtk_crtc->ddp_comp[1];
-					local_layer = i - comp_layer_nr;
-				} else
-					local_layer = i;
-
-				mtk_ddp_comp_layer_config(comp, local_layer,
-							  plane_state);
-				plane_state->pending.config = false;
-			}
+			if (!plane_state->pending.config)
+				continue;
+
+			comp = mtk_drm_ddp_comp_for_plane(crtc, plane,
+							  &local_layer);
+
+			mtk_ddp_comp_layer_config(comp, local_layer,
+						  plane_state);
+			plane_state->pending.config = false;
 		}
 		mtk_crtc->pending_planes = false;
 	}
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 3/7] drm/mediatek: Add plumbing for layer_check hook

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |  2 ++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 12 ++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  6 ++++++
 4 files changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index ccf395f17a99..04e7e4bdbdb5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -394,6 +394,16 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	}
 }
 
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state)
+{
+	unsigned int local_layer;
+	struct mtk_ddp_comp *comp;
+
+	comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+	return mtk_ddp_comp_layer_check(comp, local_layer, state);
+}
+
 static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 				       struct drm_crtc_state *old_state)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index fcc134eb00c9..6afe1c19557a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -19,5 +19,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp);
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path,
 			unsigned int path_len);
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state);
 
 #endif /* MTK_DRM_CRTC_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 26441f4d1ad3..3de371e28bdf 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -80,6 +80,9 @@ struct mtk_ddp_comp_funcs {
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
+	int (*layer_check)(struct mtk_ddp_comp *comp,
+			   unsigned int idx,
+			   struct mtk_plane_state *state);
 	void (*layer_config)(struct mtk_ddp_comp *comp, unsigned int idx,
 			     struct mtk_plane_state *state);
 	void (*gamma_set)(struct mtk_ddp_comp *comp,
@@ -152,6 +155,15 @@ static inline void mtk_ddp_comp_layer_off(struct mtk_ddp_comp *comp,
 		comp->funcs->layer_off(comp, idx);
 }
 
+static inline int mtk_ddp_comp_layer_check(struct mtk_ddp_comp *comp,
+					   unsigned int idx,
+					   struct mtk_plane_state *state)
+{
+	if (comp->funcs && comp->funcs->layer_check)
+		return comp->funcs->layer_check(comp, idx, state);
+	return 0;
+}
+
 static inline void mtk_ddp_comp_layer_config(struct mtk_ddp_comp *comp,
 					     unsigned int idx,
 					     struct mtk_plane_state *state)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 584a9ecadce6..58b02fffe321 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -84,6 +84,7 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 {
 	struct drm_framebuffer *fb = state->fb;
 	struct drm_crtc_state *crtc_state;
+	int ret;
 
 	if (!fb)
 		return 0;
@@ -91,6 +92,11 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 	if (!state->crtc)
 		return 0;
 
+	ret = mtk_drm_crtc_plane_check(state->crtc, plane,
+				       to_mtk_plane_state(state));
+	if (ret)
+		return ret;
+
 	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
 	if (IS_ERR(crtc_state))
 		return PTR_ERR(crtc_state);
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 3/7] drm/mediatek: Add plumbing for layer_check hook

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |  2 ++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 12 ++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  6 ++++++
 4 files changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index ccf395f17a99..04e7e4bdbdb5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -394,6 +394,16 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	}
 }
 
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state)
+{
+	unsigned int local_layer;
+	struct mtk_ddp_comp *comp;
+
+	comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+	return mtk_ddp_comp_layer_check(comp, local_layer, state);
+}
+
 static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 				       struct drm_crtc_state *old_state)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index fcc134eb00c9..6afe1c19557a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -19,5 +19,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp);
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path,
 			unsigned int path_len);
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state);
 
 #endif /* MTK_DRM_CRTC_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 26441f4d1ad3..3de371e28bdf 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -80,6 +80,9 @@ struct mtk_ddp_comp_funcs {
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
+	int (*layer_check)(struct mtk_ddp_comp *comp,
+			   unsigned int idx,
+			   struct mtk_plane_state *state);
 	void (*layer_config)(struct mtk_ddp_comp *comp, unsigned int idx,
 			     struct mtk_plane_state *state);
 	void (*gamma_set)(struct mtk_ddp_comp *comp,
@@ -152,6 +155,15 @@ static inline void mtk_ddp_comp_layer_off(struct mtk_ddp_comp *comp,
 		comp->funcs->layer_off(comp, idx);
 }
 
+static inline int mtk_ddp_comp_layer_check(struct mtk_ddp_comp *comp,
+					   unsigned int idx,
+					   struct mtk_plane_state *state)
+{
+	if (comp->funcs && comp->funcs->layer_check)
+		return comp->funcs->layer_check(comp, idx, state);
+	return 0;
+}
+
 static inline void mtk_ddp_comp_layer_config(struct mtk_ddp_comp *comp,
 					     unsigned int idx,
 					     struct mtk_plane_state *state)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 584a9ecadce6..58b02fffe321 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -84,6 +84,7 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 {
 	struct drm_framebuffer *fb = state->fb;
 	struct drm_crtc_state *crtc_state;
+	int ret;
 
 	if (!fb)
 		return 0;
@@ -91,6 +92,11 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 	if (!state->crtc)
 		return 0;
 
+	ret = mtk_drm_crtc_plane_check(state->crtc, plane,
+				       to_mtk_plane_state(state));
+	if (ret)
+		return ret;
+
 	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
 	if (IS_ERR(crtc_state))
 		return PTR_ERR(crtc_state);
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/7] drm/mediatek: Add plumbing for layer_check hook

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |  2 ++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 12 ++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    |  6 ++++++
 4 files changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index ccf395f17a99..04e7e4bdbdb5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -394,6 +394,16 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	}
 }
 
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state)
+{
+	unsigned int local_layer;
+	struct mtk_ddp_comp *comp;
+
+	comp = mtk_drm_ddp_comp_for_plane(crtc, plane, &local_layer);
+	return mtk_ddp_comp_layer_check(comp, local_layer, state);
+}
+
 static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 				       struct drm_crtc_state *old_state)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index fcc134eb00c9..6afe1c19557a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -19,5 +19,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp);
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			const enum mtk_ddp_comp_id *path,
 			unsigned int path_len);
+int mtk_drm_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane *plane,
+			     struct mtk_plane_state *state);
 
 #endif /* MTK_DRM_CRTC_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 26441f4d1ad3..3de371e28bdf 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -80,6 +80,9 @@ struct mtk_ddp_comp_funcs {
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
+	int (*layer_check)(struct mtk_ddp_comp *comp,
+			   unsigned int idx,
+			   struct mtk_plane_state *state);
 	void (*layer_config)(struct mtk_ddp_comp *comp, unsigned int idx,
 			     struct mtk_plane_state *state);
 	void (*gamma_set)(struct mtk_ddp_comp *comp,
@@ -152,6 +155,15 @@ static inline void mtk_ddp_comp_layer_off(struct mtk_ddp_comp *comp,
 		comp->funcs->layer_off(comp, idx);
 }
 
+static inline int mtk_ddp_comp_layer_check(struct mtk_ddp_comp *comp,
+					   unsigned int idx,
+					   struct mtk_plane_state *state)
+{
+	if (comp->funcs && comp->funcs->layer_check)
+		return comp->funcs->layer_check(comp, idx, state);
+	return 0;
+}
+
 static inline void mtk_ddp_comp_layer_config(struct mtk_ddp_comp *comp,
 					     unsigned int idx,
 					     struct mtk_plane_state *state)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 584a9ecadce6..58b02fffe321 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -84,6 +84,7 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 {
 	struct drm_framebuffer *fb = state->fb;
 	struct drm_crtc_state *crtc_state;
+	int ret;
 
 	if (!fb)
 		return 0;
@@ -91,6 +92,11 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 	if (!state->crtc)
 		return 0;
 
+	ret = mtk_drm_crtc_plane_check(state->crtc, plane,
+				       to_mtk_plane_state(state));
+	if (ret)
+		return ret;
+
 	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
 	if (IS_ERR(crtc_state))
 		return PTR_ERR(crtc_state);
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 4/7] drm/mediatek: Plumb supported rotation values from components to plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |  4 +++-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    | 12 +++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |  4 +++-
 4 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 04e7e4bdbdb5..f80a8ba75977 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -600,13 +600,15 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
 					 int comp_idx, int pipe)
 {
 	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[comp_idx];
 	int i, ret;
 
 	for (i = 0; i < num_planes; i++) {
 		ret = mtk_plane_init(drm_dev,
 				&mtk_crtc->planes[mtk_crtc->layer_nr],
 				BIT(pipe),
-				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+				mtk_ddp_comp_supported_rotations(comp));
 		if (ret)
 			return ret;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 3de371e28bdf..2f1e9e75b8da 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -77,6 +77,7 @@ struct mtk_ddp_comp_funcs {
 	void (*stop)(struct mtk_ddp_comp *comp);
 	void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
 	void (*disable_vblank)(struct mtk_ddp_comp *comp);
+	unsigned int (*supported_rotations)(struct mtk_ddp_comp *comp);
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
@@ -133,6 +134,15 @@ static inline void mtk_ddp_comp_disable_vblank(struct mtk_ddp_comp *comp)
 		comp->funcs->disable_vblank(comp);
 }
 
+static inline
+unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	if (comp->funcs && comp->funcs->supported_rotations)
+		return comp->funcs->supported_rotations(comp);
+
+	return 0;
+}
+
 static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
 {
 	if (comp->funcs && comp->funcs->layer_nr)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 58b02fffe321..cd7c97eb7ee6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -138,6 +138,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 	state->pending.y = plane->state->dst.y1;
 	state->pending.width = drm_rect_width(&plane->state->dst);
 	state->pending.height = drm_rect_height(&plane->state->dst);
+	state->pending.rotation = plane->state->rotation;
 	wmb(); /* Make sure the above parameters are set before update */
 	state->pending.dirty = true;
 }
@@ -160,7 +161,8 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
 };
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type)
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations)
 {
 	int err;
 
@@ -172,6 +174,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		return err;
 	}
 
+	if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+		err = drm_plane_create_rotation_property(plane,
+							 DRM_MODE_ROTATE_0,
+							 supported_rotations);
+		if (err)
+			DRM_INFO("Create rotation property failed\n");
+	}
+
 	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 6f842df722c7..760885e35b27 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
 	unsigned int			y;
 	unsigned int			width;
 	unsigned int			height;
+	unsigned int			rotation;
 	bool				dirty;
 };
 
@@ -35,6 +36,7 @@ to_mtk_plane_state(struct drm_plane_state *state)
 }
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type);
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations);
 
 #endif
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 4/7] drm/mediatek: Plumb supported rotation values from components to plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |  4 +++-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    | 12 +++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |  4 +++-
 4 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 04e7e4bdbdb5..f80a8ba75977 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -600,13 +600,15 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
 					 int comp_idx, int pipe)
 {
 	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[comp_idx];
 	int i, ret;
 
 	for (i = 0; i < num_planes; i++) {
 		ret = mtk_plane_init(drm_dev,
 				&mtk_crtc->planes[mtk_crtc->layer_nr],
 				BIT(pipe),
-				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+				mtk_ddp_comp_supported_rotations(comp));
 		if (ret)
 			return ret;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 3de371e28bdf..2f1e9e75b8da 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -77,6 +77,7 @@ struct mtk_ddp_comp_funcs {
 	void (*stop)(struct mtk_ddp_comp *comp);
 	void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
 	void (*disable_vblank)(struct mtk_ddp_comp *comp);
+	unsigned int (*supported_rotations)(struct mtk_ddp_comp *comp);
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
@@ -133,6 +134,15 @@ static inline void mtk_ddp_comp_disable_vblank(struct mtk_ddp_comp *comp)
 		comp->funcs->disable_vblank(comp);
 }
 
+static inline
+unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	if (comp->funcs && comp->funcs->supported_rotations)
+		return comp->funcs->supported_rotations(comp);
+
+	return 0;
+}
+
 static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
 {
 	if (comp->funcs && comp->funcs->layer_nr)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 58b02fffe321..cd7c97eb7ee6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -138,6 +138,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 	state->pending.y = plane->state->dst.y1;
 	state->pending.width = drm_rect_width(&plane->state->dst);
 	state->pending.height = drm_rect_height(&plane->state->dst);
+	state->pending.rotation = plane->state->rotation;
 	wmb(); /* Make sure the above parameters are set before update */
 	state->pending.dirty = true;
 }
@@ -160,7 +161,8 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
 };
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type)
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations)
 {
 	int err;
 
@@ -172,6 +174,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		return err;
 	}
 
+	if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+		err = drm_plane_create_rotation_property(plane,
+							 DRM_MODE_ROTATE_0,
+							 supported_rotations);
+		if (err)
+			DRM_INFO("Create rotation property failed\n");
+	}
+
 	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 6f842df722c7..760885e35b27 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
 	unsigned int			y;
 	unsigned int			width;
 	unsigned int			height;
+	unsigned int			rotation;
 	bool				dirty;
 };
 
@@ -35,6 +36,7 @@ to_mtk_plane_state(struct drm_plane_state *state)
 }
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type);
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations);
 
 #endif
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/7] drm/mediatek: Plumb supported rotation values from components to plane init

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |  4 +++-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 ++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_plane.c    | 12 +++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.h    |  4 +++-
 4 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 04e7e4bdbdb5..f80a8ba75977 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -600,13 +600,15 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
 					 int comp_idx, int pipe)
 {
 	int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[comp_idx];
 	int i, ret;
 
 	for (i = 0; i < num_planes; i++) {
 		ret = mtk_plane_init(drm_dev,
 				&mtk_crtc->planes[mtk_crtc->layer_nr],
 				BIT(pipe),
-				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+				mtk_ddp_comp_supported_rotations(comp));
 		if (ret)
 			return ret;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 3de371e28bdf..2f1e9e75b8da 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -77,6 +77,7 @@ struct mtk_ddp_comp_funcs {
 	void (*stop)(struct mtk_ddp_comp *comp);
 	void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
 	void (*disable_vblank)(struct mtk_ddp_comp *comp);
+	unsigned int (*supported_rotations)(struct mtk_ddp_comp *comp);
 	unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
 	void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
 	void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
@@ -133,6 +134,15 @@ static inline void mtk_ddp_comp_disable_vblank(struct mtk_ddp_comp *comp)
 		comp->funcs->disable_vblank(comp);
 }
 
+static inline
+unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	if (comp->funcs && comp->funcs->supported_rotations)
+		return comp->funcs->supported_rotations(comp);
+
+	return 0;
+}
+
 static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
 {
 	if (comp->funcs && comp->funcs->layer_nr)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 58b02fffe321..cd7c97eb7ee6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -138,6 +138,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 	state->pending.y = plane->state->dst.y1;
 	state->pending.width = drm_rect_width(&plane->state->dst);
 	state->pending.height = drm_rect_height(&plane->state->dst);
+	state->pending.rotation = plane->state->rotation;
 	wmb(); /* Make sure the above parameters are set before update */
 	state->pending.dirty = true;
 }
@@ -160,7 +161,8 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
 };
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type)
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations)
 {
 	int err;
 
@@ -172,6 +174,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		return err;
 	}
 
+	if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+		err = drm_plane_create_rotation_property(plane,
+							 DRM_MODE_ROTATE_0,
+							 supported_rotations);
+		if (err)
+			DRM_INFO("Create rotation property failed\n");
+	}
+
 	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 6f842df722c7..760885e35b27 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
 	unsigned int			y;
 	unsigned int			width;
 	unsigned int			height;
+	unsigned int			rotation;
 	bool				dirty;
 };
 
@@ -35,6 +36,7 @@ to_mtk_plane_state(struct drm_plane_state *state)
 }
 
 int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type);
+		   unsigned long possible_crtcs, enum drm_plane_type type,
+		   unsigned int supported_rotations);
 
 #endif
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 5/7] drm/mediatek: Support reflect-y plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Expose the rotation property and handle REFLECT_Y rotations.

Changes in v2:
- Move the check logic into mtk_disp_ovl.c since it doesn't apply to rdma

Link to v1: https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 42 +++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 14878ebf59d7..fae10aead3d5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -3,6 +3,8 @@
  * Copyright (c) 2015 MediaTek Inc.
  */
 
+#include <drm/drm_fourcc.h>
+
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/module.h>
@@ -50,6 +52,7 @@
 					OVL_CON_CLRFMT_RGB : 0)
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
+#define	OVL_CON_VIRT_FLIP	BIT(9)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -137,6 +140,38 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 	return ovl->data->layer_nr;
 }
 
+static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+}
+
+static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
+			       struct mtk_plane_state *mtk_state)
+{
+	struct drm_plane_state *state = &mtk_state->base;
+	unsigned int rotation = 0;
+
+	rotation = drm_rotation_simplify(state->rotation,
+					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_Y);
+	rotation &= ~DRM_MODE_ROTATE_0;
+
+	/* We can only do reflection, not rotation */
+	if ((rotation & DRM_MODE_ROTATE_MASK) != 0)
+		return -EINVAL;
+
+	/*
+	 * TODO: Rotating/reflecting YUV buffers is not supported at this time.
+	 *	 Only RGB[AX] variants are supported.
+	 */
+	if (state->fb->format->is_yuv && rotation != 0)
+		return -EINVAL;
+
+	state->rotation = rotation;
+
+	return 0;
+}
+
 static void mtk_ovl_layer_on(struct mtk_ddp_comp *comp, unsigned int idx)
 {
 	unsigned int reg;
@@ -229,6 +264,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 	if (idx != 0)
 		con |= OVL_CON_AEN | OVL_CON_ALPHA;
 
+	if (pending->rotation & DRM_MODE_REFLECT_Y) {
+		con |= OVL_CON_VIRT_FLIP;
+		addr += (pending->height - 1) * pending->pitch;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
@@ -263,9 +303,11 @@ static const struct mtk_ddp_comp_funcs mtk_disp_ovl_funcs = {
 	.stop = mtk_ovl_stop,
 	.enable_vblank = mtk_ovl_enable_vblank,
 	.disable_vblank = mtk_ovl_disable_vblank,
+	.supported_rotations = mtk_ovl_supported_rotations,
 	.layer_nr = mtk_ovl_layer_nr,
 	.layer_on = mtk_ovl_layer_on,
 	.layer_off = mtk_ovl_layer_off,
+	.layer_check = mtk_ovl_layer_check,
 	.layer_config = mtk_ovl_layer_config,
 	.bgclr_in_on = mtk_ovl_bgclr_in_on,
 	.bgclr_in_off = mtk_ovl_bgclr_in_off,
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 5/7] drm/mediatek: Support reflect-y plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Expose the rotation property and handle REFLECT_Y rotations.

Changes in v2:
- Move the check logic into mtk_disp_ovl.c since it doesn't apply to rdma

Link to v1: https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 42 +++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 14878ebf59d7..fae10aead3d5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -3,6 +3,8 @@
  * Copyright (c) 2015 MediaTek Inc.
  */
 
+#include <drm/drm_fourcc.h>
+
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/module.h>
@@ -50,6 +52,7 @@
 					OVL_CON_CLRFMT_RGB : 0)
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
+#define	OVL_CON_VIRT_FLIP	BIT(9)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -137,6 +140,38 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 	return ovl->data->layer_nr;
 }
 
+static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+}
+
+static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
+			       struct mtk_plane_state *mtk_state)
+{
+	struct drm_plane_state *state = &mtk_state->base;
+	unsigned int rotation = 0;
+
+	rotation = drm_rotation_simplify(state->rotation,
+					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_Y);
+	rotation &= ~DRM_MODE_ROTATE_0;
+
+	/* We can only do reflection, not rotation */
+	if ((rotation & DRM_MODE_ROTATE_MASK) != 0)
+		return -EINVAL;
+
+	/*
+	 * TODO: Rotating/reflecting YUV buffers is not supported at this time.
+	 *	 Only RGB[AX] variants are supported.
+	 */
+	if (state->fb->format->is_yuv && rotation != 0)
+		return -EINVAL;
+
+	state->rotation = rotation;
+
+	return 0;
+}
+
 static void mtk_ovl_layer_on(struct mtk_ddp_comp *comp, unsigned int idx)
 {
 	unsigned int reg;
@@ -229,6 +264,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 	if (idx != 0)
 		con |= OVL_CON_AEN | OVL_CON_ALPHA;
 
+	if (pending->rotation & DRM_MODE_REFLECT_Y) {
+		con |= OVL_CON_VIRT_FLIP;
+		addr += (pending->height - 1) * pending->pitch;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
@@ -263,9 +303,11 @@ static const struct mtk_ddp_comp_funcs mtk_disp_ovl_funcs = {
 	.stop = mtk_ovl_stop,
 	.enable_vblank = mtk_ovl_enable_vblank,
 	.disable_vblank = mtk_ovl_disable_vblank,
+	.supported_rotations = mtk_ovl_supported_rotations,
 	.layer_nr = mtk_ovl_layer_nr,
 	.layer_on = mtk_ovl_layer_on,
 	.layer_off = mtk_ovl_layer_off,
+	.layer_check = mtk_ovl_layer_check,
 	.layer_config = mtk_ovl_layer_config,
 	.bgclr_in_on = mtk_ovl_bgclr_in_on,
 	.bgclr_in_off = mtk_ovl_bgclr_in_off,
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/7] drm/mediatek: Support reflect-y plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Expose the rotation property and handle REFLECT_Y rotations.

Changes in v2:
- Move the check logic into mtk_disp_ovl.c since it doesn't apply to rdma

Link to v1: https://lists.freedesktop.org/archives/dri-devel/2019-November/242312.html

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 42 +++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 14878ebf59d7..fae10aead3d5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -3,6 +3,8 @@
  * Copyright (c) 2015 MediaTek Inc.
  */
 
+#include <drm/drm_fourcc.h>
+
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/module.h>
@@ -50,6 +52,7 @@
 					OVL_CON_CLRFMT_RGB : 0)
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
+#define	OVL_CON_VIRT_FLIP	BIT(9)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -137,6 +140,38 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 	return ovl->data->layer_nr;
 }
 
+static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
+{
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+}
+
+static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
+			       struct mtk_plane_state *mtk_state)
+{
+	struct drm_plane_state *state = &mtk_state->base;
+	unsigned int rotation = 0;
+
+	rotation = drm_rotation_simplify(state->rotation,
+					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_Y);
+	rotation &= ~DRM_MODE_ROTATE_0;
+
+	/* We can only do reflection, not rotation */
+	if ((rotation & DRM_MODE_ROTATE_MASK) != 0)
+		return -EINVAL;
+
+	/*
+	 * TODO: Rotating/reflecting YUV buffers is not supported at this time.
+	 *	 Only RGB[AX] variants are supported.
+	 */
+	if (state->fb->format->is_yuv && rotation != 0)
+		return -EINVAL;
+
+	state->rotation = rotation;
+
+	return 0;
+}
+
 static void mtk_ovl_layer_on(struct mtk_ddp_comp *comp, unsigned int idx)
 {
 	unsigned int reg;
@@ -229,6 +264,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 	if (idx != 0)
 		con |= OVL_CON_AEN | OVL_CON_ALPHA;
 
+	if (pending->rotation & DRM_MODE_REFLECT_Y) {
+		con |= OVL_CON_VIRT_FLIP;
+		addr += (pending->height - 1) * pending->pitch;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
@@ -263,9 +303,11 @@ static const struct mtk_ddp_comp_funcs mtk_disp_ovl_funcs = {
 	.stop = mtk_ovl_stop,
 	.enable_vblank = mtk_ovl_enable_vblank,
 	.disable_vblank = mtk_ovl_disable_vblank,
+	.supported_rotations = mtk_ovl_supported_rotations,
 	.layer_nr = mtk_ovl_layer_nr,
 	.layer_on = mtk_ovl_layer_on,
 	.layer_off = mtk_ovl_layer_off,
+	.layer_check = mtk_ovl_layer_check,
 	.layer_config = mtk_ovl_layer_config,
 	.bgclr_in_on = mtk_ovl_bgclr_in_on,
 	.bgclr_in_off = mtk_ovl_bgclr_in_off,
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 6/7] drm/mediatek: Support reflect-x plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add support for REFLECT_X rotations.

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index fae10aead3d5..f4c4d3fedc5f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -53,6 +53,7 @@
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
 #define	OVL_CON_VIRT_FLIP	BIT(9)
+#define	OVL_CON_HORZ_FLIP	BIT(10)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -142,7 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
+	       DRM_MODE_REFLECT_X;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
@@ -153,6 +155,7 @@ static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
 
 	rotation = drm_rotation_simplify(state->rotation,
 					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_X |
 					 DRM_MODE_REFLECT_Y);
 	rotation &= ~DRM_MODE_ROTATE_0;
 
@@ -269,6 +272,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 		addr += (pending->height - 1) * pending->pitch;
 	}
 
+	if (pending->rotation & DRM_MODE_REFLECT_X) {
+		con |= OVL_CON_HORZ_FLIP;
+		addr += pending->pitch - 1;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 6/7] drm/mediatek: Support reflect-x plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add support for REFLECT_X rotations.

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index fae10aead3d5..f4c4d3fedc5f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -53,6 +53,7 @@
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
 #define	OVL_CON_VIRT_FLIP	BIT(9)
+#define	OVL_CON_HORZ_FLIP	BIT(10)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -142,7 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
+	       DRM_MODE_REFLECT_X;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
@@ -153,6 +155,7 @@ static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
 
 	rotation = drm_rotation_simplify(state->rotation,
 					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_X |
 					 DRM_MODE_REFLECT_Y);
 	rotation &= ~DRM_MODE_ROTATE_0;
 
@@ -269,6 +272,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 		addr += (pending->height - 1) * pending->pitch;
 	}
 
+	if (pending->rotation & DRM_MODE_REFLECT_X) {
+		con |= OVL_CON_HORZ_FLIP;
+		addr += pending->pitch - 1;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 6/7] drm/mediatek: Support reflect-x plane rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Add support for REFLECT_X rotations.

Cc: Fritz Koenig <frkoenig@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Cc: Mark Yacoub <markyacoub@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index fae10aead3d5..f4c4d3fedc5f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -53,6 +53,7 @@
 #define	OVL_CON_AEN		BIT(8)
 #define	OVL_CON_ALPHA		0xff
 #define	OVL_CON_VIRT_FLIP	BIT(9)
+#define	OVL_CON_HORZ_FLIP	BIT(10)
 
 struct mtk_disp_ovl_data {
 	unsigned int addr;
@@ -142,7 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
+	       DRM_MODE_REFLECT_X;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
@@ -153,6 +155,7 @@ static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
 
 	rotation = drm_rotation_simplify(state->rotation,
 					 DRM_MODE_ROTATE_0 |
+					 DRM_MODE_REFLECT_X |
 					 DRM_MODE_REFLECT_Y);
 	rotation &= ~DRM_MODE_ROTATE_0;
 
@@ -269,6 +272,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
 		addr += (pending->height - 1) * pending->pitch;
 	}
 
+	if (pending->rotation & DRM_MODE_REFLECT_X) {
+		con |= OVL_CON_HORZ_FLIP;
+		addr += pending->pitch - 1;
+	}
+
 	writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
 	writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
 	writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Now that we support both reflections, we can expose 180 degree rotation
and rely on the simplify routine to convert that into REFLECT_X |
REFLECT_Y

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index f4c4d3fedc5f..4a55bb6e2213 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
-	       DRM_MODE_REFLECT_X;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
+	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Now that we support both reflections, we can expose 180 degree rotation
and rely on the simplify routine to convert that into REFLECT_X |
REFLECT_Y

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index f4c4d3fedc5f..4a55bb6e2213 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
-	       DRM_MODE_REFLECT_X;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
+	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
-- 
Sean Paul, Software Engineer, Google / Chromium OS


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

From: Sean Paul <seanpaul@chromium.org>

Now that we support both reflections, we can expose 180 degree rotation
and rely on the simplify routine to convert that into REFLECT_X |
REFLECT_Y

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index f4c4d3fedc5f..4a55bb6e2213 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
 
 static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
 {
-	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
-	       DRM_MODE_REFLECT_X;
+	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
+	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
 }
 
 static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> From: Sean Paul <seanpaul@chromium.org>
> 
> Now that we support both reflections, we can expose 180 degree rotation
> and rely on the simplify routine to convert that into REFLECT_X |
> REFLECT_Y
> 

Patch 1 ~ 6 of this series looks good to me.
For this one, I think the rotation check in mtk_ovl_layer_check() should
be modified.

Regards,
CK

> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index f4c4d3fedc5f..4a55bb6e2213 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
>  
>  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
>  {
> -	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> -	       DRM_MODE_REFLECT_X;
> +	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> +	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
>  }
>  
>  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,



_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> From: Sean Paul <seanpaul@chromium.org>
> 
> Now that we support both reflections, we can expose 180 degree rotation
> and rely on the simplify routine to convert that into REFLECT_X |
> REFLECT_Y
> 

Patch 1 ~ 6 of this series looks good to me.
For this one, I think the rotation check in mtk_ovl_layer_check() should
be modified.

Regards,
CK

> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index f4c4d3fedc5f..4a55bb6e2213 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
>  
>  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
>  {
> -	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> -	       DRM_MODE_REFLECT_X;
> +	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> +	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
>  }
>  
>  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> From: Sean Paul <seanpaul@chromium.org>
> 
> Now that we support both reflections, we can expose 180 degree rotation
> and rely on the simplify routine to convert that into REFLECT_X |
> REFLECT_Y
> 

Patch 1 ~ 6 of this series looks good to me.
For this one, I think the rotation check in mtk_ovl_layer_check() should
be modified.

Regards,
CK

> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index f4c4d3fedc5f..4a55bb6e2213 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
>  
>  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
>  {
> -	return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> -	       DRM_MODE_REFLECT_X;
> +	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> +	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
>  }
>  
>  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
>
> Hi, Sean:
>
> On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > From: Sean Paul <seanpaul@chromium.org>
> >
> > Now that we support both reflections, we can expose 180 degree rotation
> > and rely on the simplify routine to convert that into REFLECT_X |
> > REFLECT_Y
> >
>
> Patch 1 ~ 6 of this series looks good to me.
> For this one, I think the rotation check in mtk_ovl_layer_check() should
> be modified.
>

Thanks for the quick reviews, CK!

In what way would you like the check to be modified? I'm guessing
you're asking that I add it to the bitmask passed to the
simplify_rotation function?

If that's the case, we don't actually want to modify the
simplify_rotation bitmask since that bitmask is supposed to be only
the rotations that the hardware can achieve. So if you pass ROTATE_180
into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
what we want. Does that make sense, or am I missing something?

Thanks,

Sean

> Regards,
> CK
>
> > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index f4c4d3fedc5f..4a55bb6e2213 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> >
> >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> >  {
> > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > -            DRM_MODE_REFLECT_X;
> > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> >  }
> >
> >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
>
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
>
> Hi, Sean:
>
> On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > From: Sean Paul <seanpaul@chromium.org>
> >
> > Now that we support both reflections, we can expose 180 degree rotation
> > and rely on the simplify routine to convert that into REFLECT_X |
> > REFLECT_Y
> >
>
> Patch 1 ~ 6 of this series looks good to me.
> For this one, I think the rotation check in mtk_ovl_layer_check() should
> be modified.
>

Thanks for the quick reviews, CK!

In what way would you like the check to be modified? I'm guessing
you're asking that I add it to the bitmask passed to the
simplify_rotation function?

If that's the case, we don't actually want to modify the
simplify_rotation bitmask since that bitmask is supposed to be only
the rotations that the hardware can achieve. So if you pass ROTATE_180
into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
what we want. Does that make sense, or am I missing something?

Thanks,

Sean

> Regards,
> CK
>
> > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index f4c4d3fedc5f..4a55bb6e2213 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> >
> >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> >  {
> > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > -            DRM_MODE_REFLECT_X;
> > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> >  }
> >
> >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
>
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[Sean Paul]

On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
>
> Hi, Sean:
>
> On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > From: Sean Paul <seanpaul@chromium.org>
> >
> > Now that we support both reflections, we can expose 180 degree rotation
> > and rely on the simplify routine to convert that into REFLECT_X |
> > REFLECT_Y
> >
>
> Patch 1 ~ 6 of this series looks good to me.
> For this one, I think the rotation check in mtk_ovl_layer_check() should
> be modified.
>

Thanks for the quick reviews, CK!

In what way would you like the check to be modified? I'm guessing
you're asking that I add it to the bitmask passed to the
simplify_rotation function?

If that's the case, we don't actually want to modify the
simplify_rotation bitmask since that bitmask is supposed to be only
the rotations that the hardware can achieve. So if you pass ROTATE_180
into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
what we want. Does that make sense, or am I missing something?

Thanks,

Sean

> Regards,
> CK
>
> > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index f4c4d3fedc5f..4a55bb6e2213 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> >
> >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> >  {
> > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > -            DRM_MODE_REFLECT_X;
> > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> >  }
> >
> >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Wed, 2019-11-06 at 09:42 -0500, Sean Paul wrote:
> On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
> >
> > Hi, Sean:
> >
> > On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > > From: Sean Paul <seanpaul@chromium.org>
> > >
> > > Now that we support both reflections, we can expose 180 degree rotation
> > > and rely on the simplify routine to convert that into REFLECT_X |
> > > REFLECT_Y
> > >
> >
> > Patch 1 ~ 6 of this series looks good to me.
> > For this one, I think the rotation check in mtk_ovl_layer_check() should
> > be modified.
> >
> 
> Thanks for the quick reviews, CK!
> 
> In what way would you like the check to be modified? I'm guessing
> you're asking that I add it to the bitmask passed to the
> simplify_rotation function?
> 
> If that's the case, we don't actually want to modify the
> simplify_rotation bitmask since that bitmask is supposed to be only
> the rotations that the hardware can achieve. So if you pass ROTATE_180
> into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
> what we want. Does that make sense, or am I missing something?

drm_rotation_simplify() is really hard to understand. You're right, so
apply this series to mediatek-drm-next-5.5-2 [1], thanks.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.5-2

Regards,
CK

> 
> Thanks,
> 
> Sean
> 
> > Regards,
> > CK
> >
> > > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > index f4c4d3fedc5f..4a55bb6e2213 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> > >
> > >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> > >  {
> > > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > > -            DRM_MODE_REFLECT_X;
> > > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> > >  }
> > >
> > >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
> >
> >



_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Wed, 2019-11-06 at 09:42 -0500, Sean Paul wrote:
> On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
> >
> > Hi, Sean:
> >
> > On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > > From: Sean Paul <seanpaul@chromium.org>
> > >
> > > Now that we support both reflections, we can expose 180 degree rotation
> > > and rely on the simplify routine to convert that into REFLECT_X |
> > > REFLECT_Y
> > >
> >
> > Patch 1 ~ 6 of this series looks good to me.
> > For this one, I think the rotation check in mtk_ovl_layer_check() should
> > be modified.
> >
> 
> Thanks for the quick reviews, CK!
> 
> In what way would you like the check to be modified? I'm guessing
> you're asking that I add it to the bitmask passed to the
> simplify_rotation function?
> 
> If that's the case, we don't actually want to modify the
> simplify_rotation bitmask since that bitmask is supposed to be only
> the rotations that the hardware can achieve. So if you pass ROTATE_180
> into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
> what we want. Does that make sense, or am I missing something?

drm_rotation_simplify() is really hard to understand. You're right, so
apply this series to mediatek-drm-next-5.5-2 [1], thanks.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.5-2

Regards,
CK

> 
> Thanks,
> 
> Sean
> 
> > Regards,
> > CK
> >
> > > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > index f4c4d3fedc5f..4a55bb6e2213 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> > >
> > >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> > >  {
> > > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > > -            DRM_MODE_REFLECT_X;
> > > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> > >  }
> > >
> > >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
> >
> >



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation

[CK Hu]

Hi, Sean:

On Wed, 2019-11-06 at 09:42 -0500, Sean Paul wrote:
> On Wed, Nov 6, 2019 at 4:07 AM CK Hu <ck.hu@mediatek.com> wrote:
> >
> > Hi, Sean:
> >
> > On Tue, 2019-11-05 at 16:10 -0500, Sean Paul wrote:
> > > From: Sean Paul <seanpaul@chromium.org>
> > >
> > > Now that we support both reflections, we can expose 180 degree rotation
> > > and rely on the simplify routine to convert that into REFLECT_X |
> > > REFLECT_Y
> > >
> >
> > Patch 1 ~ 6 of this series looks good to me.
> > For this one, I think the rotation check in mtk_ovl_layer_check() should
> > be modified.
> >
> 
> Thanks for the quick reviews, CK!
> 
> In what way would you like the check to be modified? I'm guessing
> you're asking that I add it to the bitmask passed to the
> simplify_rotation function?
> 
> If that's the case, we don't actually want to modify the
> simplify_rotation bitmask since that bitmask is supposed to be only
> the rotations that the hardware can achieve. So if you pass ROTATE_180
> into simplify_rotation, it will return REFLECT_X | REFLECT_Y, which is
> what we want. Does that make sense, or am I missing something?

drm_rotation_simplify() is really hard to understand. You're right, so
apply this series to mediatek-drm-next-5.5-2 [1], thanks.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.5-2

Regards,
CK

> 
> Thanks,
> 
> Sean
> 
> > Regards,
> > CK
> >
> > > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > index f4c4d3fedc5f..4a55bb6e2213 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > @@ -143,8 +143,8 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> > >
> > >  static unsigned int mtk_ovl_supported_rotations(struct mtk_ddp_comp *comp)
> > >  {
> > > -     return DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y |
> > > -            DRM_MODE_REFLECT_X;
> > > +     return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> > > +            DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> > >  }
> > >
> > >  static int mtk_ovl_layer_check(struct mtk_ddp_comp *comp, unsigned int idx,
> >
> >


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel