All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yuti Amonkar <yamonkar@cadence.com>
To: <dri-devel@lists.freedesktop.org>
Cc: mparab@cadence.com, yamonkar@cadence.com, praneeth@ti.com,
	dkangude@cadence.com, jsarha@ti.com, tomi.valkeinen@ti.com,
	sjakhade@cadence.com
Subject: [PATCH v1 0/3] drm: Add support for Cadence MHDP DPI/DP bridge and J721E wrapper.
Date: Tue, 3 Dec 2019 11:16:03 +0100	[thread overview]
Message-ID: <1575368166-861-1-git-send-email-yamonkar@cadence.com> (raw)

This patch series adds new DRM driver for Cadence Display Port. The Cadence Display Port 
is also referred as MHDP (Mobile High Definition Link, High-Definition Multimedia Interface 
Display Port) Cadence Display Port complies with VESA DisplayPort (DP) and embedded Display 
Port (eDP) standards This driver implements Single Stream Transport (SST) support. Adds Texas 
Instruments SoC J721e specific wrapper and adds the device tree bindings in YAML format

The patch series has three patches which applies the changes in the below sequence 
1. 001-dt-bindings-drm-bridge-Document-Cadence-MHDP-bridge-bindings-in-yaml-format
Documents the bindings in yaml format.
2. 002-drm-bridge-Add-support-for-Cadence-MHDP-bridge
This patch adds new DRM driver for Cadence MHDP Display Port. The patch implements supports 
for single stream transport mode.
3. 003-drm-mhdp-add-j721e-wrapper
Add Texas Instruments (TI) j721e wrapper for mhdp. The wrapper configures mhdp clocks 
and muxes as required by SoC.

Yuti Amonkar (3):
  dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings in yaml
    format
  drm: bridge: Add support for Cadence MHDP DPI/DP bridge
  drm/mhdp: add j721e wrapper

 .../bindings/display/bridge/cdns,mhdp.yaml         |  101 +
 drivers/gpu/drm/bridge/Kconfig                     |   21 +
 drivers/gpu/drm/bridge/Makefile                    |    6 +
 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c           |   79 +
 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h           |   55 +
 drivers/gpu/drm/bridge/cdns-mhdp.c                 | 2243 ++++++++++++++++++++
 drivers/gpu/drm/bridge/cdns-mhdp.h                 |  381 ++++
 7 files changed, 2886 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.h

-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2019-12-03 12:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 10:16 Yuti Amonkar [this message]
2019-12-03 10:16 ` [PATCH v1 1/3] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings in yaml format Yuti Amonkar
2019-12-12 14:13   ` Jyri Sarha
2019-12-03 10:16 ` [PATCH v1 2/3] drm: bridge: Add support for Cadence MHDP DPI/DP bridge Yuti Amonkar
2019-12-03 17:31   ` kbuild test robot
2019-12-03 17:31     ` kbuild test robot
2019-12-03 19:43     ` Jyri Sarha
2019-12-03 19:43       ` Jyri Sarha
2019-12-03 10:16 ` [PATCH v1 3/3] drm/mhdp: add j721e wrapper Yuti Amonkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575368166-861-1-git-send-email-yamonkar@cadence.com \
    --to=yamonkar@cadence.com \
    --cc=dkangude@cadence.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=mparab@cadence.com \
    --cc=praneeth@ti.com \
    --cc=sjakhade@cadence.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.