From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
paul.burton@mips.com, paulburton@kernel.org,
paul@crapouillou.net, mturquette@baylibre.com, sboyd@kernel.org,
mark.rutland@arm.com, sernia.zhou@foxmail.com,
zhenwenjin@gmail.com
Subject: [PATCH v2 3/5] dt-bindings: clock: Add X1830 bindings.
Date: Fri, 13 Dec 2019 23:21:10 +0800 [thread overview]
Message-ID: <1576250472-124315-5-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1576250472-124315-1-git-send-email-zhouyanjie@wanyeetech.com>
Add the clock bindings for the X1830 Soc from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Notes:
v1->v2:
Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
the old mailbox is in an unstable state.
.../devicetree/bindings/clock/ingenic,cgu.txt | 1 +
include/dt-bindings/clock/x1830-cgu.h | 46 ++++++++++++++++++++++
2 files changed, 47 insertions(+)
create mode 100644 include/dt-bindings/clock/x1830-cgu.h
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
index 75598e6..74bfc57 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
@@ -12,6 +12,7 @@ Required properties:
* ingenic,jz4770-cgu
* ingenic,jz4780-cgu
* ingenic,x1000-cgu
+ * ingenic,x1830-cgu
- reg : The address & length of the CGU registers.
- clocks : List of phandle & clock specifiers for clocks external to the CGU.
Two such external clocks should be specified - first the external crystal
diff --git a/include/dt-bindings/clock/x1830-cgu.h b/include/dt-bindings/clock/x1830-cgu.h
new file mode 100644
index 00000000..6499170
--- /dev/null
+++ b/include/dt-bindings/clock/x1830-cgu.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,x1830-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ * - external clocks
+ * - PLLs
+ * - muxes/dividers in the order they appear in the x1830 programmers manual
+ * - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_X1830_CGU_H__
+#define __DT_BINDINGS_CLOCK_X1830_CGU_H__
+
+#define X1830_CLK_EXCLK 0
+#define X1830_CLK_RTCLK 1
+#define X1830_CLK_APLL 2
+#define X1830_CLK_MPLL 3
+#define X1830_CLK_EPLL 4
+#define X1830_CLK_VPLL 5
+#define X1830_CLK_SCLKA 6
+#define X1830_CLK_CPUMUX 7
+#define X1830_CLK_CPU 8
+#define X1830_CLK_L2CACHE 9
+#define X1830_CLK_AHB0 10
+#define X1830_CLK_AHB2PMUX 11
+#define X1830_CLK_AHB2 12
+#define X1830_CLK_PCLK 13
+#define X1830_CLK_DDR 14
+#define X1830_CLK_MAC 15
+#define X1830_CLK_MSCMUX 16
+#define X1830_CLK_MSC0 17
+#define X1830_CLK_MSC1 18
+#define X1830_CLK_SSIPLL 19
+#define X1830_CLK_SSIMUX 20
+#define X1830_CLK_SSI0 21
+#define X1830_CLK_SMB0 22
+#define X1830_CLK_SMB1 23
+#define X1830_CLK_SMB2 24
+#define X1830_CLK_UART0 25
+#define X1830_CLK_UART1 26
+#define X1830_CLK_SSI1 27
+#define X1830_CLK_SFC 28
+#define X1830_CLK_PDMA 29
+
+#endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */
--
2.7.4
next prev parent reply other threads:[~2019-12-13 20:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-13 15:21 clk: Ingenic: Add support for the X1830 v2 周琰杰 (Zhou Yanjie)
2019-12-13 15:21 ` [PATCH v2 0/5] " 周琰杰 (Zhou Yanjie)
2019-12-13 15:21 ` [PATCH v2 1/5] clk: Ingenic: Adjust cgu code to make it compatible with X1830 周琰杰 (Zhou Yanjie)
2019-12-13 21:25 ` Paul Cercueil
2019-12-14 12:16 ` zhouyanjie
2019-12-13 15:21 ` [PATCH v2 2/5] clk: Ingenic: Adjust code to make it compatible with new cgu code 周琰杰 (Zhou Yanjie)
2019-12-13 15:21 ` 周琰杰 (Zhou Yanjie) [this message]
2019-12-13 15:21 ` [PATCH v2 4/5] clk: Ingenic: Add CGU driver for X1830 周琰杰 (Zhou Yanjie)
2019-12-13 15:21 ` [PATCH v2 5/5] clk: Ingenic: Remove unnecessary spinlock when reading registers 周琰杰 (Zhou Yanjie)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576250472-124315-5-git-send-email-zhouyanjie@wanyeetech.com \
--to=zhouyanjie@wanyeetech.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=zhenwenjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.