All of lore.kernel.org
 help / color / mirror / Atom feed
From: vincent.cheng.xh@renesas.com
To: richardcochran@gmail.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Vincent Cheng <vincent.cheng.xh@renesas.com>
Subject: [PATCH v4 net-next 1/1] ptp: clockmatrix: Rework clockmatrix version information.
Date: Tue,  7 Jan 2020 09:47:57 -0500	[thread overview]
Message-ID: <1578408477-4650-2-git-send-email-vincent.cheng.xh@renesas.com> (raw)
In-Reply-To: <1578408477-4650-1-git-send-email-vincent.cheng.xh@renesas.com>

From: Vincent Cheng <vincent.cheng.xh@renesas.com>

Simplify and fix the version information displayed by the driver.
The new info better relects what is needed to support the hardware.

Prev:
Version: 4.8.0, Pipeline 22169 0x4001, Rev 0, Bond 5, CSR 311, IRQ 2

New:
Version: 4.8.0, Id: 0x4001  Hw Rev: 5  OTP Config Select: 15

- Remove pipeline, CSR and IRQ because version x.y.z already incorporates
  this information.
- Remove bond number because it is not used.
- Remove rev number because register was not implemented, always 0
- Add HW Rev ID register to replace rev number
- Add OTP config select to show the user configuration chosen by
  the configurable GPIO pins on start-up

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
---
 drivers/ptp/idt8a340_reg.h    |  2 ++
 drivers/ptp/ptp_clockmatrix.c | 77 ++++++++-----------------------------------
 2 files changed, 15 insertions(+), 64 deletions(-)

diff --git a/drivers/ptp/idt8a340_reg.h b/drivers/ptp/idt8a340_reg.h
index 9263bc3..69eedda 100644
--- a/drivers/ptp/idt8a340_reg.h
+++ b/drivers/ptp/idt8a340_reg.h
@@ -77,6 +77,8 @@
 #define JTAG_DEVICE_ID                    0x001c
 #define PRODUCT_ID                        0x001e
 
+#define OTP_SCSR_CONFIG_SELECT            0x0022
+
 #define STATUS                            0xc03c
 #define USER_GPIO0_TO_7_STATUS            0x008a
 #define USER_GPIO8_TO_15_STATUS           0x008b
diff --git a/drivers/ptp/ptp_clockmatrix.c b/drivers/ptp/ptp_clockmatrix.c
index e858367..032e112 100644
--- a/drivers/ptp/ptp_clockmatrix.c
+++ b/drivers/ptp/ptp_clockmatrix.c
@@ -405,6 +405,7 @@ static int _idtcm_set_dpll_tod(struct idtcm_channel *channel,
 	if (wr_trig == HW_TOD_WR_TRIG_SEL_MSB) {
 
 		if (idtcm->calculate_overhead_flag) {
+			/* Assumption: I2C @ 400KHz */
 			total_overhead_ns =  ktime_to_ns(ktime_get_raw()
 							 - idtcm->start_time)
 					     + idtcm->tod_write_overhead_ns
@@ -596,44 +597,7 @@ static int idtcm_state_machine_reset(struct idtcm *idtcm)
 
 static int idtcm_read_hw_rev_id(struct idtcm *idtcm, u8 *hw_rev_id)
 {
-	return idtcm_read(idtcm,
-			  GENERAL_STATUS,
-			  HW_REV_ID,
-			  hw_rev_id,
-			  sizeof(u8));
-}
-
-static int idtcm_read_bond_id(struct idtcm *idtcm, u8 *bond_id)
-{
-	return idtcm_read(idtcm,
-			  GENERAL_STATUS,
-			  BOND_ID,
-			  bond_id,
-			  sizeof(u8));
-}
-
-static int idtcm_read_hw_csr_id(struct idtcm *idtcm, u16 *hw_csr_id)
-{
-	int err;
-	u8 buf[2] = {0};
-
-	err = idtcm_read(idtcm, GENERAL_STATUS, HW_CSR_ID, buf, sizeof(buf));
-
-	*hw_csr_id = (buf[1] << 8) | buf[0];
-
-	return err;
-}
-
-static int idtcm_read_hw_irq_id(struct idtcm *idtcm, u16 *hw_irq_id)
-{
-	int err;
-	u8 buf[2] = {0};
-
-	err = idtcm_read(idtcm, GENERAL_STATUS, HW_IRQ_ID, buf, sizeof(buf));
-
-	*hw_irq_id = (buf[1] << 8) | buf[0];
-
-	return err;
+	return idtcm_read(idtcm, HW_REVISION, REV_ID, hw_rev_id, sizeof(u8));
 }
 
 static int idtcm_read_product_id(struct idtcm *idtcm, u16 *product_id)
@@ -674,20 +638,11 @@ static int idtcm_read_hotfix_release(struct idtcm *idtcm, u8 *hotfix)
 			  sizeof(u8));
 }
 
-static int idtcm_read_pipeline(struct idtcm *idtcm, u32 *pipeline)
+static int idtcm_read_otp_scsr_config_select(struct idtcm *idtcm,
+					     u8 *config_select)
 {
-	int err;
-	u8 buf[4] = {0};
-
-	err = idtcm_read(idtcm,
-			 GENERAL_STATUS,
-			 PIPELINE_ID,
-			 &buf[0],
-			 sizeof(buf));
-
-	*pipeline = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-
-	return err;
+	return idtcm_read(idtcm, GENERAL_STATUS, OTP_SCSR_CONFIG_SELECT,
+			  config_select, sizeof(u8));
 }
 
 static int process_pll_mask(struct idtcm *idtcm, u32 addr, u8 val, u8 *mask)
@@ -1078,28 +1033,22 @@ static void idtcm_display_version_info(struct idtcm *idtcm)
 	u8 major;
 	u8 minor;
 	u8 hotfix;
-	u32 pipeline;
 	u16 product_id;
-	u16 csr_id;
-	u16 irq_id;
 	u8 hw_rev_id;
-	u8 bond_id;
+	u8 config_select;
+	char *fmt = "%d.%d.%d, Id: 0x%04x  HW Rev: %d  OTP Config Select: %d\n";
 
 	idtcm_read_major_release(idtcm, &major);
 	idtcm_read_minor_release(idtcm, &minor);
 	idtcm_read_hotfix_release(idtcm, &hotfix);
-	idtcm_read_pipeline(idtcm, &pipeline);
 
 	idtcm_read_product_id(idtcm, &product_id);
 	idtcm_read_hw_rev_id(idtcm, &hw_rev_id);
-	idtcm_read_bond_id(idtcm, &bond_id);
-	idtcm_read_hw_csr_id(idtcm, &csr_id);
-	idtcm_read_hw_irq_id(idtcm, &irq_id);
-
-	dev_info(&idtcm->client->dev, "Version:  %d.%d.%d, Pipeline %u\t"
-		 "0x%04x, Rev %d, Bond %d, CSR %d, IRQ %d\n",
-		 major, minor, hotfix, pipeline,
-		 product_id, hw_rev_id, bond_id, csr_id, irq_id);
+
+	idtcm_read_otp_scsr_config_select(idtcm, &config_select);
+
+	dev_info(&idtcm->client->dev, fmt, major, minor, hotfix,
+		 product_id, hw_rev_id, config_select);
 }
 
 static const struct ptp_clock_info idtcm_caps = {
-- 
2.7.4


  reply	other threads:[~2020-01-07 14:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 14:47 [PATCH v4 net-next 0/1] Replace IDT with Renesas and improve version info vincent.cheng.xh
2020-01-07 14:47 ` vincent.cheng.xh [this message]
2020-01-07 21:51   ` [PATCH v4 net-next 1/1] ptp: clockmatrix: Rework clockmatrix version information David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578408477-4650-2-git-send-email-vincent.cheng.xh@renesas.com \
    --to=vincent.cheng.xh@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.