All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] tests/acceptance: Test PMON with Loongson-3A1000 CPU
@ 2021-01-12  2:07 Jiaxun Yang
  2021-01-12 12:10 ` Philippe Mathieu-Daudé
  2021-01-12 14:05 ` Wainer dos Santos Moschetta
  0 siblings, 2 replies; 17+ messages in thread
From: Jiaxun Yang @ 2021-01-12  2:07 UTC (permalink / raw)
  To: qemu-devel
  Cc: Huacai Chen, Philippe Mathieu-Daudé,
	Wainer dos Santos Moschetta, Cleber Rosa

Test booting of PMON bootloader on loongson3-virt platform.

$ (venv) AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
    avocado --show=app,console \
      run -t machine:loongson3-virt tests/acceptance
Fetching asset from tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console
JOB ID     : 8e202b3727847c9104d0d3d6546ed225d35f6706
JOB LOG    : /home/flygoat/avocado/job-results/job-2021-01-12T10.02-8e202b3/job.log
 (1/1) tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console:  console: PMON2000 MIPS Initializing. Standby...
console: 00000000Jump to 9fc
console: Init Memory done.
console: The uncache data is:
console: 00000000:  5555555555555555
console: 00000008:  aaaaaaaaaaaaaaaa
console: 00000010:  3333333333333333
console: 00000018:  cccccccccccccccc
console: 00000020:  7777777777777777
console: 00000028:  8888888888888888
console: 00000030:  1111111111111111
console: 00000038:  eeeeeeeeeeeeeeee
console: The cached  data is:
console: 00000000:  5555555555555555
console: 00000008:  aaaaaaaaaaaaaaaa
console: 00000010:  3333333333333333
console: 00000018:  cccccccccccccccc
console: 00000020:  7777777777777777
console: 00000028:  8888888888888888
console: 00000030:  1111111111111111
console: 00000038:  eeeeeeeeeeeeeeee
console: Copy PMON to execute location...
console: start = 0x8f900000
console: s0 = 0x30300000
console: _edata = 0x8f989010
console: _end = 0x8f98a028copy text section done.
console: Copy PMON to execute location done.
console: sp=8f8fc000
console: Uncompressing Bios............................................................................OK,Booting Bios
console: FREQ
console: DONE
console: DEVI
console: ENVI
console: MAPV
console: NVRAM@8f7ff898
console: STDV
console: 80100000:  memory between 8f7ff400-8f800000  is already been allocated,heap is already above this point
console: SBDD
console: P12PCIH
console: PCIH
console: PCID
console: setting up 1 bus
console: PCI bus 0 slot 1: probe...completed
console: PCI bus 0 slot 1/0: vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)
console: PCI bus 0 slot 1/0: reg 0x10 = 0xffffff00
console: PCI bus 0 slot 2: probe...completed
console: PCI bus 0 slot 2/0: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00)
console: PCI bus 0 slot 2/0: reg 0x10 = 0xffffffe1
console: PCI bus 0 slot 2/0: reg 0x14 = 0xfffff000
console: PCI bus 0 slot 2/0: reg 0x20 = 0xffffc00c
console: PCI bus 0 slot 2/0: reg 0x30 = 0xfffc0000
console: PCI bus 0 slot 3: probe...completed
console: PCI bus 0 slot 4: probe...completed
console: PCI bus 0 slot 5: probe...completed
console: PCI bus 0 slot 6: probe...completed
console: PCI bus 0 slot 7: probe...completed
console: PCI bus 0 slot 8: probe...completed
console: PCI bus 0 slot 9: probe...completed
console: PCI bus 0 slot 10: probe...completed
console: PCI bus 0 slot 11: probe...completed
console: PCI bus 0 slot 12: probe...completed
console: PCI bus 0 slot 13: probe...completed
console: PCI bus 0 slot 14: probe...completed
console: PCI bus 0 slot 15: probe...completed
console: PCI bus 0 slot 16: probe...completed
console: PCI bus 0 slot 17: probe...completed
console: PCI bus 0 slot 18: probe...completed
console: PCI bus 0 slot 19: probe...completed
console: PCI bus 0 slot 20: probe...completed
console: PCI bus 0 slot 21: probe...completed
console: PCI bus 0 slot 22: probe...completed
console: PCI bus 0 slot 23: probe...completed
console: PCI bus 0 slot 24: probe...completed
console: PCI bus 0 slot 25: probe...completed
console: PCI bus 0 slot 26: probe...completed
console: PCI bus 0 slot 27: probe...completed
console: PCI bus 0 slot 28: probe...completed
console: PCI bus 0 slot 29: probe...completed
console: PCI bus 0 slot 30: probe...completed
console: PCI bus 0 slot 31: probe...completed
console: PCIS
console: PCIR
console: PCIW
console: PCI bus 0 slot 2/0: mem @0x40000000, reg 0x30 262144 bytes
console: PCI bus 0 slot 2/0: mem @0x40040000, reg 0x20 16384 bytes
console: PCI bus 0 slot 2/0: mem @0x40044000, reg 0x14 4096 bytes
console: PCI bus 0 slot 1/0: mem @0x40045000, reg 0x10 256 bytes
console: PCI bus 0 slot 2/0: exp @0x40000000, 262144 bytes
console: PCI bus 0 slot 2/0: i/o @0x00004000, reg 0x10 32 bytes
console: NETI
console: RTCL
console: PCID
console: VGAI
console: memorysize=c000000,base=8f6ff508,sysMem=8f6ef500
console: in setup_int_vect!done!VESA
console: vga bios init failed, rc=-1
console: in configure
console: mainbus0 (root)
console: localbus0 at mainbus0
console: loopdev0 at mainbus0pcibr0 at mainbus0
console: pci0 at pcibr0 bus 0
console: ohci0 at pci0 dev 1 function 0 vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc0045000, bus_base is : 0xc0000000
console: OHCI revision: 0x00000010
console: RH: a: 0x00000203 b: 0x00000000
console: early period(0x0)
console: OHCI 8c01ec00 initialized ok
console: New Device 0
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  110
console: bDeviceClass =9
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 1
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  110
console: bDeviceClass =9
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =0
console: idProduct =0
console: bcdDevice =0
console: iManufacturer=0
console: iProduct =1
console: iSerialNumber=0
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 25, wLength 25
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=19
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=0
console: bmAttributes=40
console: MaxPower=0
console: 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff
console: ##EP epmaxpacketin[1] = 2
console: set configuration 1
console: new device strings: Mfr=0, Product=1, SerialNumber=0
console: USB device number 1 default language ID 0x409
console: Manufacturer
console: Product      OHCI Root Hub
console: SerialNumber
console: New Device 1
console: usb_get_descriptor
-console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 2
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =627
console: idProduct =1
console: bcdDevice =0
console: iManufacturer=1
console: iProduct =4
console: iSerialNumber=b
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 34, wLength 34
console: unknown Description Type : 21
console: 09 21 11 01 00 01 22 3F 00
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=22
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=8
console: bmAttributes=a0
console: MaxPower=32
console: 09 04 00 00 01 03 01 01 00 09 21 11 01 00 01 22 3f 00 07 05 81 03 08 00 0a
console: ##EP epmaxpacketin[1] = 8
console: set configuration 1
console: new device strings: Mfr=1, Product=4, SerialNumber=11
console: USB device number 2 default language ID 0x409
console: Manufacturer QEMU
console: Product      QEMU USB Keyboard
console: SerialNumber 68284-0000:00:01.0-1
console: drive at ohci0 devnum 2, Product QEMU USB Keyboard
console: not configured
console: New Device 2
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 3
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB =  200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =627
console: idProduct =1
console: bcdDevice =0
console: iManufacturer=1
console: iProduct =3
console: iSerialNumber=a
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 34, wLength 34
console: unknown Description Type : 21
console: 09 21 01 00 00 01 22 4A 00
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=22
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=7
console: bmAttributes=a0
console: MaxPower=32
console: 09 04 00 00 01 03 00 00 00 09 21 01 00 00 01 22 4a 00 07 05 81 03 08 00 0a
console: ##EP epmaxpacketin[1] = 8
console: set configuration 1
console: new device strings: Mfr=1, Product=3, SerialNumber=10
console: USB device number 3 default language ID 0x409
console: Manufacturer QEMU
console: Product      QEMU USB Tablet
console: SerialNumber 28754-0000:00:01.0-2
console: drive at ohci0 devnum 3, Product QEMU USB Tablet
console: not configured
console: drive at ohci0 devnum 1, Product OHCI Root Hub
console: not configured
console: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) at pci0 dev 2 function 0 not configured
console: out configure
console: Press <Del> to set BIOS,waiting for 3 seconds here.....
|console: devconfig done.
console: ifinit done.
console: domaininit done.
console: init_proc....
console: HSTI
console: SYMI
console: SBDE
console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
console: [[  [[[[[[[[[       [[[[[       [[[[   [[[[[  [[[[[      [[[[[       [[[[[       [[[[   [[[[[  [[
console: [[  [[[[[[[[   [[[[  [[[   [[[[  [[[    [[[[  [[[[  [[[[  [[[   [[[[  [[[   [[[[  [[[    [[[[  [[
console: [[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [  [[[  [[[  [[[[[[[[[[[[   [[[[[[[  [[[[[[ [[[  [  [[[  [[
console: [[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [[  [[  [[[  [[[    [[[[[[[    [[[[  [[[[[[ [[[  [[  [[  [[
console: [[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [[[  [  [[[  [[[[[  [[[[[[[[[[  [[[  [[[[[[ [[[  [[[  [  [[
console: [[  [[[[[[[[   [[[[  [[[   [[[[  [[[  [[[[    [[[   [[[[  [[[   [[[  [[[[   [[[[  [[[  [[[[    [[
console: [[       [[[[       [[[[[       [[[[  [[[[[   [[[[       [[[[[      [[[[[[       [[[[  [[[[[   [[
console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[2011 Loongson][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
console: Configuration [Bonito,EL,NET,SCSI,IDE]
console: Version: PMON2000 3.3 (Bonito) #0: Tue Dec 22 01:58:09 UTC 2020 commit b3ece66234adbf7d4e453f0ba4f326c099ac2a76 Author: Jiaxun Yang <jiaxun.yang@flygoat.com> Date:   Tue Dec 22 09:51:10 2020 +0800 .
console: Supported loaders [txt, srec, elf, bin]
console: Supported filesystems [net, fat, fs, disk, iso9660, socket, tty, ram]
console: This software may be redistributed under the BSD copyright.
console: Copyright 2000-2002, Opsycon AB, Sweden.
console: Copyright 2005, ICT CAS.
console: CPU GODSON3 BogoMIPS: 1327
PASS (3.89 s)
RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME   : 4.38 s

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 MAINTAINERS                                 |  1 +
 tests/acceptance/machine_mips_loongson3v.py | 39 +++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 tests/acceptance/machine_mips_loongson3v.py

diff --git a/MAINTAINERS b/MAINTAINERS
index 4be087b88e..f38882f997 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1164,6 +1164,7 @@ F: hw/intc/loongson_liointc.c
 F: hw/mips/loongson3_bootp.c
 F: hw/mips/loongson3_bootp.h
 F: hw/mips/loongson3_virt.c
+F: tests/acceptance/machine_mips_loongson3v.py
 
 Boston
 M: Paul Burton <paulburton@kernel.org>
diff --git a/tests/acceptance/machine_mips_loongson3v.py b/tests/acceptance/machine_mips_loongson3v.py
new file mode 100644
index 0000000000..17a85de69f
--- /dev/null
+++ b/tests/acceptance/machine_mips_loongson3v.py
@@ -0,0 +1,39 @@
+# Functional tests for the Generic Loongson-3 Platform.
+#
+# Copyright (c) 2020 Philippe Mathieu-Daudé <f4bug@amsat.org>
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+import os
+import time
+
+from avocado import skipUnless
+from avocado_qemu import Test
+from avocado_qemu import wait_for_console_pattern
+
+class MipsLoongson3v(Test):
+    @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
+    def test_pmon_serial_console(self):
+        """
+        :avocado: tags=arch:mips64el
+        :avocado: tags=endian:little
+        :avocado: tags=machine:loongson3-virt
+        :avocado: tags=cpu:Loongson-3A1000
+        :avocado: tags=device:liointc
+        :avocado: tags=device:goldfish_rtc
+        """
+
+        pmon_hash = '7c8b45dd81ccfc55ff28f5aa267a41c3'
+        pmon_path = self.fetch_asset('https://github.com/loongson-community/pmon/'
+                                    'releases/download/20210112/pmon-3avirt.bin',
+                                     asset_hash=pmon_hash, algorithm='md5')
+
+        self.vm.set_console()
+        self.vm.add_args('-bios', pmon_path)
+        self.vm.launch()
+        wait_for_console_pattern(self, 'PMON2000 MIPS Initializing. Standby...')
+        wait_for_console_pattern(self, 'Copy PMON to execute location done.')
+        wait_for_console_pattern(self, 'CPU GODSON3 BogoMIPS:')
-- 
2.30.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread
* [PATCH] tests/acceptance: Test PMON with Loongson-3A1000 CPU
@ 2020-12-16 18:17 Philippe Mathieu-Daudé
  2020-12-17  0:08 ` Jiaxun Yang
                   ` (3 more replies)
  0 siblings, 4 replies; 17+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-12-16 18:17 UTC (permalink / raw)
  To: qemu-devel, Huacai Chen
  Cc: Philippe Mathieu-Daudé, Philippe Mathieu-Daudé,
	Jiaxun Yang, Wainer dos Santos Moschetta, Cleber Rosa

Test the PMON firmware. As the firmware is not redistributable,
it has to be downloaded manually first. Then it can be used by
providing its path via the PMON_PATH environment variable:

  $ AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
    PMON_PATH=/images/pmon \
    avocado --show=app,console \
      run -t machine:loongson3-virt tests/acceptance
  JOB ID     : 363e66a2d20b1c0e3f515653f9137483b83b2984
  JOB LOG    : /home/phil/avocado/job-results/job-2020-12-16T19.02-363e66a/job.log
   (1/2) tests/acceptance/machine_mips_fuloong3.py:MipsFuloong3.test_pmon_BLD_serial_console:
  console: PMON2000 MIPS Initializing. Standby...
  console: 00000000
  console: Shut down other cores
  console: 0xbfe00190  : 0000000000000000
  console: CPU CLK SEL : 00000000
  console: MEM CLK SEL : 00000000
  console: Change the driver
  console: Soft CLK SEL adjust begin
  console: HT         :00000000
  console: DDR_DIV:00000002
  console: BBGEN start  :
  console: BBGEN config value  :00000000
  console: MC RESET
  console: Fix L1xbar illegal access at NODE 0
  console: Fix L2xbar in NODE 0
  console: 32 bit PCI space translate to 64 bit HT space
  console: Waiting HyperTransport bus to be up.
  PASS (0.10 s)
   (2/2) tests/acceptance/machine_mips_fuloong3.py:MipsFuloong3.test_pmon_A1101_serial_console:
  console: PMON2000 MIPS Initializing. Standby...
  console: 0xbfe00190  : 0000000000000000
  console: CPU CLK SEL : 00000000
  console: CPU clk frequency = SYSCLK x 0x0000001e /  1
  console: MEM CLK SEL : 00000000
  console: DDR clk frequency = MEMCLK x 0x0000001e /  3
  console: Fix L1xbar illegal access
  console: Fix L2xbar illegal access
  console: Init tlb...
  console: godson2 caches found
  PASS (0.12 s)
  RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 0.58 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Based-on: <20201215125716.477023-1-chenhuacai@kernel.org>
---
 MAINTAINERS                                 |  1 +
 tests/acceptance/machine_mips_loongson3v.py | 66 +++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 tests/acceptance/machine_mips_loongson3v.py

diff --git a/MAINTAINERS b/MAINTAINERS
index f75fa2a7142..9a02d44f997 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1166,6 +1166,7 @@ M: Huacai Chen <chenhuacai@kernel.org>
 R: Jiaxun Yang <jiaxun.yang@flygoat.com>
 S: Maintained
 F: hw/intc/loongson_liointc.c
+F: tests/acceptance/machine_mips_loongson3v.py
 
 Boston
 M: Paul Burton <paulburton@kernel.org>
diff --git a/tests/acceptance/machine_mips_loongson3v.py b/tests/acceptance/machine_mips_loongson3v.py
new file mode 100644
index 00000000000..8e698bbc99b
--- /dev/null
+++ b/tests/acceptance/machine_mips_loongson3v.py
@@ -0,0 +1,66 @@
+# Functional tests for the Generic Loongson-3 Platform.
+#
+# Copyright (c) 2020 Philippe Mathieu-Daudé <f4bug@amsat.org>
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+import os
+import time
+
+from avocado import skipUnless
+from avocado_qemu import Test
+from avocado_qemu import wait_for_console_pattern
+
+class MipsFuloong3(Test):
+
+    timeout = 60
+
+    @skipUnless(os.getenv('PMON_PATH'), 'PMON_PATH not available')
+    @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
+    def test_pmon_BLD_serial_console(self):
+        """
+        :avocado: tags=arch:mips64el
+        :avocado: tags=endian:little
+        :avocado: tags=machine:loongson3-virt
+        :avocado: tags=cpu:Loongson-3A1000
+        :avocado: tags=device:liointc
+        :avocado: tags=device:goldfish_rtc
+        """
+        pmon_name = 'pmon_BLD-3A3000-780EMATX-1w-V1.10.bin'
+        pmon_hash = '38916ee03ed09a86997b40c687c83e92'
+        pmon_path = self.fetch_asset('file://' + os.path.join(
+                                        os.getenv('PMON_PATH'), pmon_name),
+                                     asset_hash=pmon_hash, algorithm='md5')
+
+        self.vm.set_console()
+        self.vm.add_args('-bios', pmon_path)
+        self.vm.launch()
+        wait_for_console_pattern(self, 'PMON2000 MIPS Initializing. Standby...')
+        wait_for_console_pattern(self, 'Shut down other cores')
+        wait_for_console_pattern(self, 'Waiting HyperTransport bus to be up.')
+
+    @skipUnless(os.getenv('PMON_PATH'), 'PMON_PATH not available')
+    @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
+    def test_pmon_A1101_serial_console(self):
+        """
+        :avocado: tags=arch:mips64el
+        :avocado: tags=endian:little
+        :avocado: tags=machine:loongson3-virt
+        :avocado: tags=cpu:Loongson-3A1000
+        :avocado: tags=device:liointc
+        :avocado: tags=device:goldfish_rtc
+        """
+        pmon_name = 'pmon-A1101-2.0.8.bin'
+        pmon_hash = 'cc40276213cfa20922720f183b92ab61'
+        pmon_path = self.fetch_asset('file://' + os.path.join(
+                                        os.getenv('PMON_PATH'), pmon_name),
+                                     asset_hash=pmon_hash, algorithm='md5')
+
+        self.vm.set_console()
+        self.vm.add_args('-bios', pmon_path)
+        self.vm.launch()
+        wait_for_console_pattern(self, 'PMON2000 MIPS Initializing. Standby...')
+        wait_for_console_pattern(self, 'godson2 caches found')
-- 
2.26.2



^ permalink raw reply related	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2021-01-19  7:23 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-12  2:07 [PATCH] tests/acceptance: Test PMON with Loongson-3A1000 CPU Jiaxun Yang
2021-01-12 12:10 ` Philippe Mathieu-Daudé
2021-01-18 16:54   ` Alex Bennée
2021-01-19  5:57     ` Philippe Mathieu-Daudé
2021-01-19  6:59       ` Jiaxun Yang
2021-01-19  7:19         ` Philippe Mathieu-Daudé
2021-01-12 14:05 ` Wainer dos Santos Moschetta
2021-01-13 23:26   ` Philippe Mathieu-Daudé
  -- strict thread matches above, loose matches on Subject: below --
2020-12-16 18:17 Philippe Mathieu-Daudé
2020-12-17  0:08 ` Jiaxun Yang
2020-12-17  3:36 ` Jiaxun Yang
2020-12-18 15:21   ` Philippe Mathieu-Daudé
2020-12-18 15:27 ` Wainer dos Santos Moschetta
2020-12-18 20:51 ` Willian Rampazzo
2020-12-21 12:51   ` Huacai Chen
2020-12-21 15:34     ` Philippe Mathieu-Daudé
2020-12-22  0:40       ` Jiaxun Yang

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.