All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org,
	Vasundhara Volam <vasundhara-v.volam@broadcom.com>,
	Jiri Pirko <jiri@mellanox.com>, Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next 15/16] bnxt_en: Add support for devlink info command
Date: Sun, 26 Jan 2020 04:03:09 -0500	[thread overview]
Message-ID: <1580029390-32760-16-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1580029390-32760-1-git-send-email-michael.chan@broadcom.com>

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

Display the following information via devlink info command:
  - Driver name
  - Board id
  - Broad revision
  - Board Serial number
  - Board FW version
  - Board NVM CFG version
  - FW App version
  - FW management version
  - FW RoCE version

  Standard output example:
  $ devlink dev info pci/0000:3b:00.0
  pci/0000:3b:00.0:
  driver bnxt_en
  serial_number 00-10-18-FF-FE-AD-05-00
  versions:
      fixed:
        asic.id D802
        asic.rev 1
      running:
        fw 216.1.124.0
        board.nvm_cfg_ver 0.0.0
        fw.app 216.1.122.0
        fw.mgmt 864.0.32.0
        fw.roce 216.1.15.0

[ This version has incorporated changes suggested by Jakub Kicinski to
  use generic devlink version tags. ]

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 135 ++++++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h |   4 +
 2 files changed, 139 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
index 35e2a22..0297fa1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
@@ -284,11 +284,15 @@ void bnxt_dl_health_recovery_done(struct bnxt *bp)
 		devlink_health_reporter_recovery_done(hlth->fw_reset_reporter);
 }
 
+static int bnxt_dl_info_get(struct devlink *dl, struct devlink_info_req *req,
+			    struct netlink_ext_ack *extack);
+
 static const struct devlink_ops bnxt_dl_ops = {
 #ifdef CONFIG_BNXT_SRIOV
 	.eswitch_mode_set = bnxt_dl_eswitch_mode_set,
 	.eswitch_mode_get = bnxt_dl_eswitch_mode_get,
 #endif /* CONFIG_BNXT_SRIOV */
+	.info_get	  = bnxt_dl_info_get,
 	.flash_update	  = bnxt_dl_flash_update,
 };
 
@@ -355,6 +359,137 @@ static void bnxt_copy_from_nvm_data(union devlink_param_value *dst,
 		dst->vu8 = (u8)val32;
 }
 
+static int bnxt_hwrm_get_nvm_cfg_ver(struct bnxt *bp,
+				     union devlink_param_value *nvm_cfg_ver)
+{
+	struct hwrm_nvm_get_variable_input req = {0};
+	union bnxt_nvm_data *data;
+	dma_addr_t data_dma_addr;
+	int rc;
+
+	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_NVM_GET_VARIABLE, -1, -1);
+	data = dma_alloc_coherent(&bp->pdev->dev, sizeof(*data),
+				  &data_dma_addr, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	req.dest_data_addr = cpu_to_le64(data_dma_addr);
+	req.data_len = cpu_to_le16(BNXT_NVM_CFG_VER_BITS);
+	req.option_num = cpu_to_le16(NVM_OFF_NVM_CFG_VER);
+
+	rc = hwrm_send_message_silent(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	if (!rc)
+		bnxt_copy_from_nvm_data(nvm_cfg_ver, data,
+					BNXT_NVM_CFG_VER_BITS,
+					BNXT_NVM_CFG_VER_BYTES);
+
+	dma_free_coherent(&bp->pdev->dev, sizeof(*data), data, data_dma_addr);
+	return rc;
+}
+
+static int bnxt_dl_info_get(struct devlink *dl, struct devlink_info_req *req,
+			    struct netlink_ext_ack *extack)
+{
+	struct bnxt *bp = bnxt_get_bp_from_dl(dl);
+	union devlink_param_value nvm_cfg_ver;
+	struct hwrm_ver_get_output *ver_resp;
+	char mgmt_ver[FW_VER_STR_LEN];
+	char roce_ver[FW_VER_STR_LEN];
+	char fw_ver[FW_VER_STR_LEN];
+	char buf[32];
+	int rc;
+
+	rc = devlink_info_driver_name_put(req, DRV_MODULE_NAME);
+	if (rc)
+		return rc;
+
+	sprintf(buf, "%X", bp->chip_num);
+	rc = devlink_info_version_fixed_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_ASIC_ID, buf);
+	if (rc)
+		return rc;
+
+	ver_resp = &bp->ver_resp;
+	sprintf(buf, "%X", ver_resp->chip_rev);
+	rc = devlink_info_version_fixed_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_ASIC_REV, buf);
+	if (rc)
+		return rc;
+
+	if (BNXT_PF(bp)) {
+		sprintf(buf, "%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X",
+			bp->dsn[7], bp->dsn[6], bp->dsn[5], bp->dsn[4],
+			bp->dsn[3], bp->dsn[2], bp->dsn[1], bp->dsn[0]);
+		rc = devlink_info_serial_number_put(req, buf);
+		if (rc)
+			return rc;
+	}
+
+	if (strlen(ver_resp->active_pkg_name)) {
+		rc =
+		    devlink_info_version_running_put(req,
+					DEVLINK_INFO_VERSION_GENERIC_FW,
+					ver_resp->active_pkg_name);
+		if (rc)
+			return rc;
+	}
+
+	if (BNXT_PF(bp) && !bnxt_hwrm_get_nvm_cfg_ver(bp, &nvm_cfg_ver)) {
+		u32 ver = nvm_cfg_ver.vu32;
+
+		sprintf(buf, "%X.%X.%X", (ver >> 16) & 0xF, (ver >> 8) & 0xF,
+			ver & 0xF);
+		rc = devlink_info_version_running_put(req,
+				DEVLINK_INFO_VERSION_GENERIC_BOARD_NVM_CFG,
+				buf);
+		if (rc)
+			return rc;
+	}
+
+	if (ver_resp->flags & VER_GET_RESP_FLAGS_EXT_VER_AVAIL) {
+		snprintf(fw_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->hwrm_fw_major, ver_resp->hwrm_fw_minor,
+			 ver_resp->hwrm_fw_build, ver_resp->hwrm_fw_patch);
+
+		snprintf(mgmt_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->mgmt_fw_major, ver_resp->mgmt_fw_minor,
+			 ver_resp->mgmt_fw_build, ver_resp->mgmt_fw_patch);
+
+		snprintf(roce_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->roce_fw_major, ver_resp->roce_fw_minor,
+			 ver_resp->roce_fw_build, ver_resp->roce_fw_patch);
+	} else {
+		snprintf(fw_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->hwrm_fw_maj_8b, ver_resp->hwrm_fw_min_8b,
+			 ver_resp->hwrm_fw_bld_8b, ver_resp->hwrm_fw_rsvd_8b);
+
+		snprintf(mgmt_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->mgmt_fw_maj_8b, ver_resp->mgmt_fw_min_8b,
+			 ver_resp->mgmt_fw_bld_8b, ver_resp->mgmt_fw_rsvd_8b);
+
+		snprintf(roce_ver, FW_VER_STR_LEN, "%d.%d.%d.%d",
+			 ver_resp->roce_fw_maj_8b, ver_resp->roce_fw_min_8b,
+			 ver_resp->roce_fw_bld_8b, ver_resp->roce_fw_rsvd_8b);
+	}
+	rc = devlink_info_version_running_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_FW_APP, fw_ver);
+	if (rc)
+		return rc;
+
+	if (!(bp->flags & BNXT_FLAG_CHIP_P5)) {
+		rc = devlink_info_version_running_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_FW_MGMT, mgmt_ver);
+		if (rc)
+			return rc;
+
+		rc = devlink_info_version_running_put(req,
+			DEVLINK_INFO_VERSION_GENERIC_FW_ROCE, roce_ver);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
 static int bnxt_hwrm_nvm_req(struct bnxt *bp, u32 param_id, void *msg,
 			     int msg_len, union devlink_param_value *val)
 {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
index 08aaa44..95f893f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
@@ -38,6 +38,10 @@ static inline void bnxt_link_bp_to_dl(struct bnxt *bp, struct devlink *dl)
 #define NVM_OFF_IGNORE_ARI		164
 #define NVM_OFF_DIS_GRE_VER_CHECK	171
 #define NVM_OFF_ENABLE_SRIOV		401
+#define NVM_OFF_NVM_CFG_VER		602
+
+#define BNXT_NVM_CFG_VER_BITS		24
+#define BNXT_NVM_CFG_VER_BYTES		4
 
 #define BNXT_MSIX_VEC_MAX	1280
 #define BNXT_MSIX_VEC_MIN_MAX	128
-- 
2.5.1


  parent reply	other threads:[~2020-01-26  9:03 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-26  9:02 [PATCH net-next 00/16] bnxt_en: Updates for net-next Michael Chan
2020-01-26  9:02 ` [PATCH net-next 01/16] bnxt_en: Support ingress rate limiting with TC-offload Michael Chan
2020-01-27  0:12   ` Jakub Kicinski
2020-01-26  9:02 ` [PATCH net-next 02/16] bnxt_en: Improve link up detection Michael Chan
2020-01-26  9:02 ` [PATCH net-next 03/16] bnxt_en: Improve bnxt_probe_phy() Michael Chan
2020-01-26  9:02 ` [PATCH net-next 04/16] bnxt_en: Remove the setting of dev_port Michael Chan
2020-01-26  9:02 ` [PATCH net-next 05/16] bnxt_en: Support UDP RSS hashing on 575XX chips Michael Chan
2020-01-26  9:03 ` [PATCH net-next 06/16] bnxt_en: Do not accept fragments for aRFS flow steering Michael Chan
2020-01-26  9:03 ` [PATCH net-next 07/16] bnxt_en: Periodically check and remove aged-out ntuple filters Michael Chan
2020-01-26  9:03 ` [PATCH net-next 08/16] bnxt_en: Disable workaround for lost interrupts on 575XX B0 and newer chips Michael Chan
2020-01-26  9:03 ` [PATCH net-next 09/16] bnxt_en: Refactor bnxt_dl_register() Michael Chan
2020-01-26 11:32   ` Jiri Pirko
2020-01-27  4:51     ` Vasundhara Volam
2020-01-26  9:03 ` [PATCH net-next 10/16] bnxt_en: Register devlink irrespective of firmware spec version Michael Chan
2020-01-26  9:03 ` [PATCH net-next 11/16] bnxt_en: Move devlink_register before registering netdev Michael Chan
2020-01-26  9:03 ` [PATCH net-next 12/16] bnxt_en: Add support to update progress of flash update Michael Chan
2020-01-26  9:03 ` [PATCH net-next 13/16] bnxt_en: Rename switch_id to dsn Michael Chan
2020-01-26  9:03 ` [PATCH net-next 14/16] devlink: add macros for "fw.roce" and "board.nvm_cfg" Michael Chan
2020-01-27  0:18   ` Jakub Kicinski
2020-01-27  5:42     ` Vasundhara Volam
2020-01-27 14:25       ` Jakub Kicinski
2020-01-26  9:03 ` Michael Chan [this message]
2020-01-26  9:03 ` [PATCH net-next 16/16] devlink: document devlink info versions reported by bnxt_en driver Michael Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580029390-32760-16-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=jiri@mellanox.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vasundhara-v.volam@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.