* [Bug 1861884] [NEW] qemu socket multicast not working
@ 2020-02-04 15:43 Maarten
2020-02-04 15:48 ` [Bug 1861884] " Maarten
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Maarten @ 2020-02-04 15:43 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
-display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Result when using ping command
PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
Is there additional configuration necessary on macos? Does this only
work on Linux? Is there additional configuration required inside of the
guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
** Affects: qemu
Importance: Undecided
Status: New
** Description changed:
Running two qemu vms on the same socket multicast address:
- qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio -display none -vga none
- -nodefaults -accel hax
- -netdev user,id=mynet0
- -device virtio-net-pci,netdev=mynet0
- -netdev socket,id=vlan,mcast=239.192.0.1:1235
- -device virtio-net-pci,netdev=vlan
- -device virtio-rng-pci
- -drive file=worker.qcow2,if=virtio
- -drive file=cloud-init.iso,format=raw,if=virtio
+ qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
+ -display none -vga none
+ -nodefaults -accel hax
+ -netdev user,id=mynet0
+ -device virtio-net-pci,netdev=mynet0
+ -netdev socket,id=vlan,mcast=239.192.0.1:1235
+ -device virtio-net-pci,netdev=vlan
+ -device virtio-rng-pci
+ -drive file=worker.qcow2,if=virtio
+ -drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Is there additional configuration necessary on macos? Does this only
work on Linux?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861884
Title:
qemu socket multicast not working
Status in QEMU:
New
Bug description:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
-display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Result when using ping command
PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
Is there additional configuration necessary on macos? Does this only
work on Linux? Is there additional configuration required inside of
the guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861884/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1861884] Re: qemu socket multicast not working
2020-02-04 15:43 [Bug 1861884] [NEW] qemu socket multicast not working Maarten
@ 2020-02-04 15:48 ` Maarten
2021-05-05 15:21 ` Thomas Huth
2021-07-05 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Maarten @ 2020-02-04 15:48 UTC (permalink / raw)
To: qemu-devel
** Description changed:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
- -display none -vga none
+ -display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
+ Result when using ping command
+
+ PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
+ From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
+ From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
+ From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
+
Is there additional configuration necessary on macos? Does this only
- work on Linux?
+ work on Linux? Is there additional configuration required inside of the
+ guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861884
Title:
qemu socket multicast not working
Status in QEMU:
New
Bug description:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
-display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Result when using ping command
PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
Is there additional configuration necessary on macos? Does this only
work on Linux? Is there additional configuration required inside of
the guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861884/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1861884] Re: qemu socket multicast not working
2020-02-04 15:43 [Bug 1861884] [NEW] qemu socket multicast not working Maarten
2020-02-04 15:48 ` [Bug 1861884] " Maarten
@ 2021-05-05 15:21 ` Thomas Huth
2021-07-05 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-05 15:21 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to
another system. For this we need to know which bugs are still valid
and which could be closed already. Thus we are setting older bugs to
"Incomplete" now.
If you still think this bug report here is valid, then please switch
the state back to "New" within the next 60 days, otherwise this report
will be marked as "Expired". Or please mark it as "Fix Released" if
the problem has been solved with a newer version of QEMU already.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861884
Title:
qemu socket multicast not working
Status in QEMU:
Incomplete
Bug description:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
-display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Result when using ping command
PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
Is there additional configuration necessary on macos? Does this only
work on Linux? Is there additional configuration required inside of
the guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861884/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1861884] Re: qemu socket multicast not working
2020-02-04 15:43 [Bug 1861884] [NEW] qemu socket multicast not working Maarten
2020-02-04 15:48 ` [Bug 1861884] " Maarten
2021-05-05 15:21 ` Thomas Huth
@ 2021-07-05 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-05 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861884
Title:
qemu socket multicast not working
Status in QEMU:
Expired
Bug description:
Running two qemu vms on the same socket multicast address:
qemu-system-x86_64 -m 2048 -smp 2 -serial mon:stdio
-display none -vga none
-nodefaults -accel hax
-netdev user,id=mynet0
-device virtio-net-pci,netdev=mynet0
-netdev socket,id=vlan,mcast=239.192.0.1:1235
-device virtio-net-pci,netdev=vlan
-device virtio-rng-pci
-drive file=worker.qcow2,if=virtio
-drive file=cloud-init.iso,format=raw,if=virtio
The two machines have a static ip on the socket network interface,
192.168.100.11 and 192.168.100.12, but are unable to reach each other.
Result when using ping command
PING 192.168.100.11 (192.168.100.11) 56(84) bytes of data.
From 192.168.100.12 icmp_seq=1 Destination Host Unreachable
From 192.168.100.12 icmp_seq=2 Destination Host Unreachable
From 192.168.100.12 icmp_seq=3 Destination Host Unreachable
Is there additional configuration necessary on macos? Does this only
work on Linux? Is there additional configuration required inside of
the guest OS?
guest OS: Debian 10 (Buster)
host OS: macOS 10.15.2
qemu: 4.2.0
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861884/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-07-05 4:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-04 15:43 [Bug 1861884] [NEW] qemu socket multicast not working Maarten
2020-02-04 15:48 ` [Bug 1861884] " Maarten
2021-05-05 15:21 ` Thomas Huth
2021-07-05 4:17 ` Launchpad Bug Tracker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.