All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akash Asthana <akashast@codeaurora.org>
To: robh+dt@kernel.org, agross@kernel.org, mark.rutland@arm.com
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, mgautam@codeaurora.org,
	rojay@codeaurora.org, skakit@codeaurora.org, swboyd@chromium.org,
	Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
Date: Mon, 17 Feb 2020 15:19:33 +0530	[thread overview]
Message-ID: <1581932974-21654-2-git-send-email-akashast@codeaurora.org> (raw)
In-Reply-To: <1581932974-21654-1-git-send-email-akashast@codeaurora.org>

Convert QSPI bindings to DT schema format using json-schema.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
 .../devicetree/bindings/spi/qcom,spi-qcom-qspi.txt | 36 ---------
 .../bindings/spi/qcom,spi-qcom-qspi.yaml           | 89 ++++++++++++++++++++++
 2 files changed, 89 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
deleted file mode 100644
index 1d64b61..0000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Qualcomm Quad Serial Peripheral Interface (QSPI)
-
-The QSPI controller allows SPI protocol communication in single, dual, or quad
-wire transmission modes for read/write access to slaves such as NOR flash.
-
-Required properties:
-- compatible:	An SoC specific identifier followed by "qcom,qspi-v1", such as
-		"qcom,sdm845-qspi", "qcom,qspi-v1"
-- reg:		Should contain the base register location and length.
-- interrupts:	Interrupt number used by the controller.
-- clocks:	Should contain the core and AHB clock.
-- clock-names:	Should be "core" for core clock and "iface" for AHB clock.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	qspi: spi@88df000 {
-		compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
-		reg = <0x88df000 0x600>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "iface", "core";
-		clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			 <&gcc GCC_QSPI_CORE_CLK>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <25000000>;
-			spi-tx-bus-width = <2>;
-			spi-rx-bus-width = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 0000000..977070a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
+
+description: |
+ The QSPI controller allows SPI protocol communication in single, dual, or quad
+ wire transmission modes for read/write access to slaves such as NOR flash.
+
+allOf:
+  - $ref: /spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-qspi
+      - const: qcom,qspi-v1
+
+  reg:
+    description: Base register location and length.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: QSPI core clock.
+
+  "#address-cells":
+     const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc: soc@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qspi: spi@88df000 {
+            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+            reg = <0 0x88df000 0 0x600>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "iface", "core";
+            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                <&gcc GCC_QSPI_CORE_CLK>;
+
+                flash@0 {
+                    compatible = "jedec,spi-nor";
+                    reg = <0>;
+                    spi-max-frequency = <25000000>;
+                    spi-tx-bus-width = <2>;
+                    spi-rx-bus-width = <2>;
+                };
+        };
+    };
+
+...
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project

  reply	other threads:[~2020-02-17  9:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-17  9:49 [PATCH 0/2] Convert QSPI binding to YAML and add interconnect doc Akash Asthana
2020-02-17  9:49 ` Akash Asthana [this message]
2020-02-20  2:29   ` [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML Stephen Boyd
2020-03-13 10:51     ` Akash Asthana
2020-02-17  9:49 ` [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI Akash Asthana
2020-02-20  2:30   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1581932974-21654-2-git-send-email-akashast@codeaurora.org \
    --to=akashast@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mgautam@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=skakit@codeaurora.org \
    --cc=swboyd@chromium.org \
    --subject='Re: [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.