All of lore.kernel.org
 help / color / mirror / Atom feed
From: Odelu Kukatla <okukatla@codeaurora.org>
To: georgi.djakov@linaro.org, daidavid1@codeaurora.org,
	bjorn.andersson@linaro.org, evgreen@google.com,
	Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: sboyd@kernel.org, ilina@codeaurora.org, seansw@qti.qualcomm.com,
	elder@linaro.org, linux-arm-msm-owner@vger.kernel.org,
	Odelu Kukatla <okukatla@codeaurora.org>
Subject: [V4, 1/3] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
Date: Tue, 25 Feb 2020 21:29:42 +0530	[thread overview]
Message-ID: <1582646384-1458-2-git-send-email-okukatla@codeaurora.org> (raw)
In-Reply-To: <1582646384-1458-1-git-send-email-okukatla@codeaurora.org>

The Qualcomm SC7180 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/interconnect/qcom,sc7180.yaml         |  85 +++++++++++
 include/dt-bindings/interconnect/qcom,sc7180.h     | 161 +++++++++++++++++++++
 2 files changed, 246 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
 create mode 100644 include/dt-bindings/interconnect/qcom,sc7180.h

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
new file mode 100644
index 0000000..2cb7d4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  Qualcomm SC7180 Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+   SC7180 interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-ipa-virt
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
+
+  '#interconnect-cells':
+    const: 1
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+      config_noc: interconnect@1500000 {
+            compatible = "qcom,sc7180-config-noc";
+            reg = <0 0x01500000 0 0x28000>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      system_noc: interconnect@1620000 {
+            compatible = "qcom,sc7180-system-noc";
+            reg = <0 0x01620000 0 0x17080>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+            compatible = "qcom,sc7180-mmss-noc";
+            reg = <0 0x01740000 0 0x1c100>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
diff --git a/include/dt-bindings/interconnect/qcom,sc7180.h b/include/dt-bindings/interconnect/qcom,sc7180.h
new file mode 100644
index 0000000..f9970f6
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,sc7180.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm SC7180 interconnect IDs
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
+
+#define MASTER_A1NOC_CFG			0
+#define MASTER_QSPI			1
+#define MASTER_QUP_0			2
+#define MASTER_SDCC_2			3
+#define MASTER_EMMC			4
+#define MASTER_UFS_MEM			5
+#define SLAVE_A1NOC_SNOC			6
+#define SLAVE_SERVICE_A1NOC			7
+
+#define MASTER_A2NOC_CFG			0
+#define MASTER_QDSS_BAM			1
+#define MASTER_QUP_1			2
+#define MASTER_USB3			3
+#define MASTER_CRYPTO			4
+#define MASTER_IPA			5
+#define MASTER_QDSS_ETR			6
+#define SLAVE_A2NOC_SNOC			7
+#define SLAVE_SERVICE_A2NOC			8
+
+#define MASTER_CAMNOC_HF0_UNCOMP			0
+#define MASTER_CAMNOC_HF1_UNCOMP			1
+#define MASTER_CAMNOC_SF_UNCOMP			2
+#define SLAVE_CAMNOC_UNCOMP			3
+
+#define MASTER_NPU			0
+#define MASTER_NPU_PROC			1
+#define SLAVE_CDSP_GEM_NOC			2
+
+#define MASTER_SNOC_CNOC			0
+#define MASTER_QDSS_DAP			1
+#define SLAVE_A1NOC_CFG			2
+#define SLAVE_A2NOC_CFG			3
+#define SLAVE_AHB2PHY_SOUTH			4
+#define SLAVE_AHB2PHY_CENTER			5
+#define SLAVE_AOP			6
+#define SLAVE_AOSS			7
+#define SLAVE_BOOT_ROM			8
+#define SLAVE_CAMERA_CFG				9
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG			10
+#define SLAVE_CAMERA_RT_THROTTLE_CFG			11
+#define SLAVE_CLK_CTL			12
+#define SLAVE_RBCPR_CX_CFG			13
+#define SLAVE_RBCPR_MX_CFG			14
+#define SLAVE_CRYPTO_0_CFG			15
+#define SLAVE_DCC_CFG			16
+#define SLAVE_CNOC_DDRSS			17
+#define SLAVE_DISPLAY_CFG			18
+#define SLAVE_DISPLAY_RT_THROTTLE_CFG			19
+#define SLAVE_DISPLAY_THROTTLE_CFG			20
+#define SLAVE_EMMC_CFG			21
+#define SLAVE_GLM					22
+#define SLAVE_GFX3D_CFG			23
+#define SLAVE_IMEM_CFG			24
+#define SLAVE_IPA_CFG			25
+#define SLAVE_CNOC_MNOC_CFG			26
+#define SLAVE_CNOC_MSS			27
+#define SLAVE_NPU_CFG			28
+#define SLAVE_NPU_DMA_BWMON_CFG			29
+#define SLAVE_NPU_PROC_BWMON_CFG			30
+#define SLAVE_PDM			31
+#define SLAVE_PIMEM_CFG			32
+#define SLAVE_PRNG			33
+#define SLAVE_QDSS_CFG			34
+#define SLAVE_QM_CFG			35
+#define SLAVE_QM_MPU_CFG			36
+#define SLAVE_QSPI_0			37
+#define SLAVE_QUP_0			38
+#define SLAVE_QUP_1			39
+#define SLAVE_SDCC_2			40
+#define SLAVE_SECURITY			41
+#define SLAVE_SNOC_CFG			42
+#define SLAVE_TCSR			43
+#define SLAVE_TLMM_WEST			44
+#define SLAVE_TLMM_NORTH			45
+#define SLAVE_TLMM_SOUTH			46
+#define SLAVE_UFS_MEM_CFG			47
+#define SLAVE_USB3			48
+#define SLAVE_VENUS_CFG			49
+#define SLAVE_VENUS_THROTTLE_CFG			50
+#define SLAVE_VSENSE_CTRL_CFG			51
+#define SLAVE_SERVICE_CNOC			52
+
+#define MASTER_CNOC_DC_NOC			0
+#define SLAVE_GEM_NOC_CFG			1
+#define SLAVE_LLCC_CFG			2
+
+#define MASTER_APPSS_PROC		0
+#define MASTER_SYS_TCU			1
+#define MASTER_GEM_NOC_CFG			2
+#define MASTER_COMPUTE_NOC			3
+#define MASTER_MNOC_HF_MEM_NOC			4
+#define MASTER_MNOC_SF_MEM_NOC			5
+#define MASTER_SNOC_GC_MEM_NOC			6
+#define MASTER_SNOC_SF_MEM_NOC			7
+#define MASTER_GFX3D			8
+#define SLAVE_MSS_PROC_MS_MPU_CFG			9
+#define SLAVE_GEM_NOC_SNOC			10
+#define SLAVE_LLCC			11
+#define SLAVE_SERVICE_GEM_NOC			12
+
+#define MASTER_IPA_CORE			0
+#define SLAVE_IPA_CORE			1
+
+#define MASTER_LLCC			0
+#define SLAVE_EBI1			1
+
+#define MASTER_CNOC_MNOC_CFG			0
+#define MASTER_CAMNOC_HF0			1
+#define MASTER_CAMNOC_HF1			2
+#define MASTER_CAMNOC_SF			3
+#define MASTER_MDP0			4
+#define MASTER_ROTATOR			5
+#define MASTER_VIDEO_P0			6
+#define MASTER_VIDEO_PROC			7
+#define SLAVE_MNOC_HF_MEM_NOC			8
+#define SLAVE_MNOC_SF_MEM_NOC			9
+#define SLAVE_SERVICE_MNOC			10
+
+#define MASTER_NPU_SYS			0
+#define MASTER_NPU_NOC_CFG			1
+#define SLAVE_NPU_CAL_DP0			2
+#define SLAVE_NPU_CP			3
+#define SLAVE_NPU_INT_DMA_BWMON_CFG			4
+#define SLAVE_NPU_DPM			5
+#define SLAVE_ISENSE_CFG			6
+#define SLAVE_NPU_LLM_CFG			7
+#define SLAVE_NPU_TCM			8
+#define SLAVE_NPU_COMPUTE_NOC			9
+#define SLAVE_SERVICE_NPU_NOC			10
+
+#define MASTER_QUP_CORE_0			0
+#define MASTER_QUP_CORE_1			1
+#define SLAVE_QUP_CORE_0			2
+#define SLAVE_QUP_CORE_1			3
+
+#define MASTER_SNOC_CFG			0
+#define MASTER_A1NOC_SNOC			1
+#define MASTER_A2NOC_SNOC			2
+#define MASTER_GEM_NOC_SNOC			3
+#define MASTER_PIMEM			4
+#define SLAVE_APPSS			5
+#define SLAVE_SNOC_CNOC			6
+#define SLAVE_SNOC_GEM_NOC_GC			7
+#define SLAVE_SNOC_GEM_NOC_SF			8
+#define SLAVE_IMEM			9
+#define SLAVE_PIMEM			10
+#define SLAVE_SERVICE_SNOC			11
+#define SLAVE_QDSS_STM			12
+#define SLAVE_TCU			13
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2020-02-25 16:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 15:59 [V4, 0/3] Add SC7180 interconnect provider driver Odelu Kukatla
2020-02-25 15:59 ` Odelu Kukatla [this message]
2020-02-28  8:45   ` [V4, 1/3] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings Georgi Djakov
2020-02-25 15:59 ` [V4, 2/3] interconnect: qcom: Add SC7180 interconnect provider driver Odelu Kukatla
2020-02-28  8:53   ` Georgi Djakov
2020-02-25 15:59 ` [V4, 3/3] arm64: dts: sc7180: Add interconnect provider DT nodes Odelu Kukatla
2020-02-27 17:12   ` Matthias Kaehlcke
2020-02-28  8:55     ` Amit Kucheria

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582646384-1458-2-git-send-email-okukatla@codeaurora.org \
    --to=okukatla@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daidavid1@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=elder@linaro.org \
    --cc=evgreen@google.com \
    --cc=georgi.djakov@linaro.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=seansw@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.