All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: peter.maydell@linaro.org
Cc: Jason Wang <jasowang@redhat.com>,
	qemu-devel@nongnu.org, Finn Thain <fthain@telegraphics.com.au>
Subject: [PULL V2 10/23] dp8393x: Pad frames to word or long word boundary
Date: Tue,  3 Mar 2020 18:10:29 +0800	[thread overview]
Message-ID: <1583230242-14597-11-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1583230242-14597-1-git-send-email-jasowang@redhat.com>

From: Finn Thain <fthain@telegraphics.com.au>

The existing code has a bug where the Remaining Buffer Word Count (RBWC)
is calculated with a truncating division, which gives the wrong result
for odd-sized packets.

Section 1.4.1 of the datasheet says,

    Once the end of the packet has been reached, the serializer will
    fill out the last word (16-bit mode) or long word (32-bit mode)
    if the last byte did not end on a word or long word boundary
    respectively. The fill byte will be 0FFh.

Implement buffer padding so that buffer limits are correctly enforced.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/dp8393x.c | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index d8bf248..22b4d36 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -768,16 +768,23 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
     dp8393xState *s = qemu_get_nic_opaque(nc);
     int packet_type;
     uint32_t available, address;
-    int width, rx_len = pkt_size;
+    int width, rx_len, padded_len;
     uint32_t checksum;
     int size;
 
-    width = (s->regs[SONIC_DCR] & SONIC_DCR_DW) ? 2 : 1;
-
     s->regs[SONIC_RCR] &= ~(SONIC_RCR_PRX | SONIC_RCR_LBK | SONIC_RCR_FAER |
         SONIC_RCR_CRCR | SONIC_RCR_LPKT | SONIC_RCR_BC | SONIC_RCR_MC);
 
-    if (pkt_size + 4 > dp8393x_rbwc(s) * 2) {
+    rx_len = pkt_size + sizeof(checksum);
+    if (s->regs[SONIC_DCR] & SONIC_DCR_DW) {
+        width = 2;
+        padded_len = ((rx_len - 1) | 3) + 1;
+    } else {
+        width = 1;
+        padded_len = ((rx_len - 1) | 1) + 1;
+    }
+
+    if (padded_len > dp8393x_rbwc(s) * 2) {
         DPRINTF("oversize packet, pkt_size is %d\n", pkt_size);
         s->regs[SONIC_ISR] |= SONIC_ISR_RBAE;
         dp8393x_update_irq(s);
@@ -812,22 +819,32 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
     s->regs[SONIC_TRBA0] = s->regs[SONIC_CRBA0];
 
     /* Calculate the ethernet checksum */
-    checksum = cpu_to_le32(crc32(0, buf, rx_len));
+    checksum = cpu_to_le32(crc32(0, buf, pkt_size));
 
     /* Put packet into RBA */
     DPRINTF("Receive packet at %08x\n", dp8393x_crba(s));
     address = dp8393x_crba(s);
     address_space_write(&s->as, address, MEMTXATTRS_UNSPECIFIED,
-                        buf, rx_len);
-    address += rx_len;
+                        buf, pkt_size);
+    address += pkt_size;
+
+    /* Put frame checksum into RBA */
     address_space_write(&s->as, address, MEMTXATTRS_UNSPECIFIED,
-                        &checksum, 4);
-    address += 4;
-    rx_len += 4;
+                        &checksum, sizeof(checksum));
+    address += sizeof(checksum);
+
+    /* Pad short packets to keep pointers aligned */
+    if (rx_len < padded_len) {
+        size = padded_len - rx_len;
+        address_space_rw(&s->as, address, MEMTXATTRS_UNSPECIFIED,
+            (uint8_t *)"\xFF\xFF\xFF", size, 1);
+        address += size;
+    }
+
     s->regs[SONIC_CRBA1] = address >> 16;
     s->regs[SONIC_CRBA0] = address & 0xffff;
     available = dp8393x_rbwc(s);
-    available -= rx_len / 2;
+    available -= padded_len >> 1;
     s->regs[SONIC_RBWC1] = available >> 16;
     s->regs[SONIC_RBWC0] = available & 0xffff;
 
-- 
2.5.0



  parent reply	other threads:[~2020-03-03 10:15 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-03 10:10 [PULL V2 00/23] Net patches Jason Wang
2020-03-03 10:10 ` [PULL V2 01/23] dp8393x: Mask EOL bit from descriptor addresses Jason Wang
2020-03-03 22:44   ` Finn Thain
2020-03-04  2:43     ` Jason Wang
2020-03-03 10:10 ` [PULL V2 02/23] dp8393x: Always use 32-bit accesses Jason Wang
2020-03-03 10:10 ` [PULL V2 03/23] dp8393x: Clean up endianness hacks Jason Wang
2020-03-03 10:10 ` [PULL V2 04/23] dp8393x: Have dp8393x_receive() return the packet size Jason Wang
2020-03-03 10:10 ` [PULL V2 05/23] dp8393x: Update LLFA and CRDA registers from rx descriptor Jason Wang
2020-03-03 10:10 ` [PULL V2 06/23] dp8393x: Clear RRRA command register bit only when appropriate Jason Wang
2020-03-03 10:10 ` [PULL V2 07/23] dp8393x: Implement packet size limit and RBAE interrupt Jason Wang
2020-03-03 10:10 ` [PULL V2 08/23] dp8393x: Don't clobber packet checksum Jason Wang
2020-03-03 10:10 ` [PULL V2 09/23] dp8393x: Use long-word-aligned RRA pointers in 32-bit mode Jason Wang
2020-03-03 10:10 ` Jason Wang [this message]
2020-03-03 10:10 ` [PULL V2 11/23] dp8393x: Clear descriptor in_use field to release packet Jason Wang
2020-03-03 10:10 ` [PULL V2 12/23] dp8393x: Always update RRA pointers and sequence numbers Jason Wang
2020-03-03 10:10 ` [PULL V2 13/23] dp8393x: Don't reset Silicon Revision register Jason Wang
2020-03-03 10:10 ` [PULL V2 14/23] dp8393x: Don't stop reception upon RBE interrupt assertion Jason Wang
2020-03-03 10:10 ` [PULL V2 15/23] e1000e: Avoid hw_error if legacy mode used Jason Wang
2020-03-03 10:10 ` [PULL V2 16/23] NetRxPkt: Introduce support for additional hash types Jason Wang
2020-03-03 10:10 ` [PULL V2 17/23] NetRxPkt: fix hash calculation of IPV6 TCP Jason Wang
2020-03-03 10:10 ` [PULL V2 18/23] hw: net: cadence_gem: Fix build errors in DB_PRINT() Jason Wang
2020-03-03 10:10 ` [PULL V2 19/23] block/replication.c: Ignore requests after failover Jason Wang
2020-03-03 10:10 ` [PULL V2 20/23] tests/test-replication.c: Add test for for secondary node continuing replication Jason Wang
2020-03-03 10:10 ` [PULL V2 21/23] net/filter.c: Add Options to insert filters anywhere in the filter list Jason Wang
2020-03-03 10:10 ` [PULL V2 22/23] colo: Update Documentation for continuous replication Jason Wang
2020-03-03 10:10 ` [PULL V2 23/23] l2tpv3: fix RFC number typo in qemu-options.hx Jason Wang
2020-03-03 13:45 ` [PULL V2 00/23] Net patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1583230242-14597-11-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=fthain@telegraphics.com.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.