From mboxrd@z Thu Jan 1 00:00:00 1970 From: patchwork-bot+linux-spi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Subject: Patchwork housekeeping for: spi-devel-general Date: Fri, 13 Mar 2020 16:00:14 +0000 Message-ID: <158411521497.4382.15706475138133789417.git-patchwork-housekeeping@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Return-path: Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: Latest series: [v3] mtd: spi-nor: add xSPI Octal DTR support (2020-03-13T15:46:33) Superseding: [v2] mtd: spi-nor: add xSPI Octal DTR support (2020-02-26T09:36:52): [v2,01/11] dt-bindings: spi: allow expressing DTR capability [v2,02/11] spi: set mode bits for "spi-rx-dtr" and "spi-tx-dtr" [v2,03/11] spi: spi-mem: allow specifying whether an op is DTR or not [v2,04/11] spi: spi-mem: allow specifying a command's extension [v2,05/11] spi: cadence-quadspi: Add support for octal DTR flashes [v2,06/11] mtd: spi-nor: add support for DTR protocol [v2,07/11] mtd: spi-nor: get command opcode extension type from BFPT [v2,08/11] mtd: spi-nor: parse xSPI Profile 1.0 table [v2,09/11] mtd: spi-nor: use dummy cycle and address width info from SFDP [v2,10/11] mtd: spi-nor: enable octal DTR mode when possible [v2,11/11] mtd: spi-nor: add support for Cypress Semper flash -- Deet-doot-dot, I am a bot. https://korg.wiki.kernel.org/userdoc/pwbot