[PATCH net-next 9/9] arm64: dts: add serdes and mdio description

[Florinel Iordache <florinel.iordache@nxp.com>]

Add dt nodes with serdes, lanes, mdio generic description for supported
platforms: ls1046, ls1088, ls2088, lx2160. This is a prerequisite to
enable backplane on device tree for these platforms.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |  33 ++++-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |  97 ++++++++++++-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 160 ++++++++++++++++++++-
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 128 ++++++++++++++++-
 .../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi    |   5 +-
 .../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi    |   5 +-
 6 files changed, 418 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index d4c1da3..c7d845f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018, 2020 NXP
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
  */
@@ -735,6 +735,37 @@
 			status = "disabled";
 		};
 
+		serdes1: serdes@1ea0000 {
+			compatible = "serdes-10g";
+			reg = <0x0 0x1ea0000 0 0x00002000>;
+			reg-names = "serdes", "serdes-10g";
+			big-endian;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1ea0000 0x00002000>;
+			lane_a: lane@800 {
+				compatible = "lane-10g";
+				reg = <0x800 0x40>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_b: lane@840 {
+				compatible = "lane-10g";
+				reg = <0x840 0x40>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_c: lane@880 {
+				compatible = "lane-10g";
+				reg = <0x880 0x40>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_d: lane@8c0 {
+				compatible = "lane-10g";
+				reg = <0x8c0 0x40>;
+				reg-names = "lane", "serdes-lane";
+			};
+		};
+
 		pcie_ep@3600000 {
 			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
 			reg = <0x00 0x03600000 0x0 0x00100000
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 5945662..474464e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Include file for NXP Layerscape-1088A family SoC.
  *
- * Copyright 2017 NXP
+ * Copyright 2017, 2020 NXP
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
@@ -325,6 +325,69 @@
 			#interrupt-cells = <2>;
 		};
 
+		/* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8B96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B96000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;	/* force the driver in LE mode */
+
+			/* Not necessary on the QDS, but needed on the RDB */
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
+		emdio2: mdio@8B97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B97000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;	/* force the driver in LE mode */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio1: mdio@0x8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio2: mdio@0x8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio3: mdio@0x8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio4: mdio@0x8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ifc: ifc@2240000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x2240000 0x0 0x20000>;
@@ -777,6 +840,38 @@
 				};
 			};
 		};
+
+		serdes1: serdes@1ea0000 {
+				compatible = "serdes-10g";
+				reg = <0x0 0x1ea0000 0 0x00002000>;
+				reg-names = "serdes", "serdes-10g";
+				little-endian;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x00 0x1ea0000 0x00002000>;
+				lane_a: lane@800 {
+					compatible = "lane-10g";
+					reg = <0x800 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_b: lane@840 {
+					compatible = "lane-10g";
+					reg = <0x840 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_c: lane@880 {
+					compatible = "lane-10g";
+					reg = <0x880 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_d: lane@8c0 {
+					compatible = "lane-10g";
+					reg = <0x8c0 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+		};
+
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f96d06d..e8f3026 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017, 2020 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -560,6 +560,113 @@
 			#interrupt-cells = <2>;
 		};
 
+		/* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8B96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B96000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;	/* force the driver in LE mode */
+
+			/* Not necessary on the QDS, but needed on the RDB */
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
+		emdio2: mdio@8B97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B97000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;	/* force the driver in LE mode */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio1: mdio@0x8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio2: mdio@0x8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio3: mdio@0x8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio4: mdio@0x8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio5: mdio@0x8c17000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio6: mdio@0x8c1b000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio7: mdio@0x8c1f000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio8: mdio@0x8c23000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		i2c0: i2c@2000000 {
 			status = "disabled";
 			compatible = "fsl,vf610-i2c";
@@ -754,6 +861,57 @@
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
+		serdes1: serdes@1ea0000 {
+				compatible = "serdes-10g";
+				reg = <0x0 0x1ea0000 0 0x00002000>;
+				reg-names = "serdes", "serdes-10g";
+				little-endian;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x00 0x1ea0000 0x00002000>;
+				lane_a: lane@800 {
+					compatible = "lane-10g";
+					reg = <0x800 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_b: lane@840 {
+					compatible = "lane-10g";
+					reg = <0x840 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_c: lane@880 {
+					compatible = "lane-10g";
+					reg = <0x880 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_d: lane@8c0 {
+					compatible = "lane-10g";
+					reg = <0x8c0 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_e: lane@900 {
+					compatible = "lane-10g";
+					reg = <0x900 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_f: lane@940 {
+					compatible = "lane-10g";
+					reg = <0x940 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_g: lane@980 {
+					compatible = "lane-10g";
+					reg = <0x980 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+				lane_h: lane@9c0 {
+					compatible = "lane-10g";
+					reg = <0x9c0 0x40>;
+					reg-names = "lane", "serdes-lane";
+				};
+		};
+
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e5ee559..2815908 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -2,7 +2,7 @@
 //
 // Device Tree Include file for Layerscape-LX2160A family SoC.
 //
-// Copyright 2018 NXP
+// Copyright 2018, 2020 NXP
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -947,9 +947,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
-			status = "disabled";
 		};
 
+		/* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
 		emdio2: mdio@8b97000 {
 			compatible = "fsl,fman-memac-mdio";
 			reg = <0x0 0x8b97000 0x0 0x1000>;
@@ -957,7 +957,129 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@0x8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio2: mdio@0x8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio3: mdio@0x8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio4: mdio@0x8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio5: mdio@0x8c17000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio6: mdio@0x8c1b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio7: mdio@0x8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio8: mdio@0x8c23000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		serdes1: serdes@1ea0000 {
+			compatible = "serdes-28g";
+			reg = <0x0 0x1ea0000 0 0x00002000>;
+			reg-names = "serdes", "serdes-28g";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1ea0000 0x00002000>;
+			lane_a: lane@800 {
+				compatible = "lane-28g";
+				reg = <0x800 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_b: lane@900 {
+				compatible = "lane-28g";
+				reg = <0x900 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_c: lane@a00 {
+				compatible = "lane-28g";
+				reg = <0xa00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_d: lane@b00 {
+				compatible = "lane-28g";
+				reg = <0xb00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_e: lane@c00 {
+				compatible = "lane-28g";
+				reg = <0xc00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_f: lane@d00 {
+				compatible = "lane-28g";
+				reg = <0xd00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_g: lane@e00 {
+				compatible = "lane-28g";
+				reg = <0xe00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
+			lane_h: lane@f00 {
+				compatible = "lane-28g";
+				reg = <0xf00 0x100>;
+				reg-names = "lane", "serdes-lane";
+			};
 		};
 
 		fsl_mc: fsl-mc@80c000000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3..d6191f1 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -3,6 +3,7 @@
  * QorIQ FMan v3 10g port #0 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
  *
  */
 
@@ -21,7 +22,7 @@ fman@1a00000 {
 		fsl,fman-10g-port;
 	};
 
-	ethernet@f0000 {
+	mac9: ethernet@f0000 {
 		cell-index = <0x8>;
 		compatible = "fsl,fman-memac";
 		reg = <0xf0000 0x1000>;
@@ -29,7 +30,7 @@ fman@1a00000 {
 		pcsphy-handle = <&pcsphy6>;
 	};
 
-	mdio@f1000 {
+	mdio9: mdio@f1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d25..1f6f28f 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -3,6 +3,7 @@
  * QorIQ FMan v3 10g port #1 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
  *
  */
 
@@ -21,7 +22,7 @@ fman@1a00000 {
 		fsl,fman-10g-port;
 	};
 
-	ethernet@f2000 {
+	mac10: ethernet@f2000 {
 		cell-index = <0x9>;
 		compatible = "fsl,fman-memac";
 		reg = <0xf2000 0x1000>;
@@ -29,7 +30,7 @@ fman@1a00000 {
 		pcsphy-handle = <&pcsphy7>;
 	};
 
-	mdio@f3000 {
+	mdio10: mdio@f3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
-- 
1.9.1