From: Maulik Shah <mkshah@codeaurora.org> To: swboyd@chromium.org, evgreen@chromium.org, dianders@chromium.org, bjorn.andersson@linaro.org Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, agross@kernel.org, mka@chromium.org, rnayak@codeaurora.org, ilina@codeaurora.org, lsrao@codeaurora.org, Maulik Shah <mkshah@codeaurora.org> Subject: [PATCH v14 2/6] soc: qcom: rpmh: Update dirty flag only when data changes Date: Thu, 26 Mar 2020 23:07:46 +0530 [thread overview] Message-ID: <1585244270-637-3-git-send-email-mkshah@codeaurora.org> (raw) In-Reply-To: <1585244270-637-1-git-send-email-mkshah@codeaurora.org> Currently rpmh ctrlr dirty flag is set for all cases regardless of data is really changed or not. Add changes to update dirty flag when data is changed to newer values. Update dirty flag everytime when data in batch cache is updated since rpmh_flush() may get invoked from any CPU instead of only last CPU going to low power mode. Also move dirty flag updates to happen from within cache_lock and remove unnecessary INIT_LIST_HEAD() call and a default case from switch. Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- drivers/soc/qcom/rpmh.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c index eb0ded0..03630ae 100644 --- a/drivers/soc/qcom/rpmh.c +++ b/drivers/soc/qcom/rpmh.c @@ -119,6 +119,7 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr, { struct cache_req *req; unsigned long flags; + u32 old_sleep_val, old_wake_val; spin_lock_irqsave(&ctrlr->cache_lock, flags); req = __find_req(ctrlr, cmd->addr); @@ -133,26 +134,27 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr, req->addr = cmd->addr; req->sleep_val = req->wake_val = UINT_MAX; - INIT_LIST_HEAD(&req->list); list_add_tail(&req->list, &ctrlr->cache); existing: + old_sleep_val = req->sleep_val; + old_wake_val = req->wake_val; + switch (state) { case RPMH_ACTIVE_ONLY_STATE: - if (req->sleep_val != UINT_MAX) - req->wake_val = cmd->data; - break; case RPMH_WAKE_ONLY_STATE: req->wake_val = cmd->data; break; case RPMH_SLEEP_STATE: req->sleep_val = cmd->data; break; - default: - break; } - ctrlr->dirty = true; + ctrlr->dirty = (req->sleep_val != old_sleep_val || + req->wake_val != old_wake_val) && + req->sleep_val != UINT_MAX && + req->wake_val != UINT_MAX; + unlock: spin_unlock_irqrestore(&ctrlr->cache_lock, flags); @@ -287,6 +289,7 @@ static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req) spin_lock_irqsave(&ctrlr->cache_lock, flags); list_add_tail(&req->list, &ctrlr->batch_cache); + ctrlr->dirty = true; spin_unlock_irqrestore(&ctrlr->cache_lock, flags); } @@ -323,6 +326,7 @@ static void invalidate_batch(struct rpmh_ctrlr *ctrlr) list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list) kfree(req); INIT_LIST_HEAD(&ctrlr->batch_cache); + ctrlr->dirty = true; spin_unlock_irqrestore(&ctrlr->cache_lock, flags); } @@ -507,7 +511,6 @@ int rpmh_invalidate(const struct device *dev) int ret; invalidate_batch(ctrlr); - ctrlr->dirty = true; do { ret = rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr)); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-03-26 17:38 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-26 17:37 [PATCH v14 0/6] Invoke rpmh_flush for non OSI targets Maulik Shah 2020-03-26 17:37 ` [PATCH v14 1/6] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah 2020-03-26 17:37 ` Maulik Shah [this message] 2020-03-26 17:37 ` [PATCH v14 3/6] soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data Maulik Shah 2020-03-26 18:31 ` Doug Anderson 2020-03-27 8:23 ` Maulik Shah 2020-03-26 17:37 ` [PATCH v14 4/6] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Maulik Shah 2020-03-26 21:18 ` Doug Anderson [not found] ` <7bd2c923-4003-a1c4-610f-548e79a94d35@codeaurora.org> 2020-03-27 18:22 ` Doug Anderson 2020-03-31 8:26 ` Maulik Shah 2020-03-26 17:37 ` [PATCH v14 5/6] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS Maulik Shah 2020-03-26 18:20 ` Doug Anderson 2020-03-26 17:37 ` [PATCH v14 6/6] soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request Maulik Shah 2020-03-26 21:46 ` Doug Anderson 2020-03-27 12:04 ` Maulik Shah 2020-03-27 18:42 ` Doug Anderson 2020-03-31 8:57 ` Maulik Shah
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1585244270-637-3-git-send-email-mkshah@codeaurora.org \ --to=mkshah@codeaurora.org \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=dianders@chromium.org \ --cc=evgreen@chromium.org \ --cc=ilina@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lsrao@codeaurora.org \ --cc=mka@chromium.org \ --cc=rnayak@codeaurora.org \ --cc=swboyd@chromium.org \ --subject='Re: [PATCH v14 2/6] soc: qcom: rpmh: Update dirty flag only when data changes' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.