All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH net 1/5] bnxt_en: Fix VF anti-spoof filter setup.
Date: Sun, 26 Apr 2020 16:24:38 -0400	[thread overview]
Message-ID: <1587932682-1212-2-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1587932682-1212-1-git-send-email-michael.chan@broadcom.com>

Fix the logic that sets the enable/disable flag for the source MAC
filter according to firmware spec 1.7.1.

In the original firmware spec. before 1.7.1, the VF spoof check flags
were not latched after making the HWRM_FUNC_CFG call, so there was a
need to keep the func_flags so that subsequent calls would perserve
the VF spoof check setting.  A change was made in the 1.7.1 spec
so that the flags became latched.  So we now set or clear the anti-
spoof setting directly without retrieving the old settings in the
stored vf->func_flags which are no longer valid.  We also remove the
unneeded vf->func_flags.

Fixes: 8eb992e876a8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h       |  1 -
 drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 10 ++--------
 2 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index f2caa27..f6a3250 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1066,7 +1066,6 @@ struct bnxt_vf_info {
 #define BNXT_VF_LINK_FORCED	0x4
 #define BNXT_VF_LINK_UP		0x8
 #define BNXT_VF_TRUST		0x10
-	u32	func_flags; /* func cfg flags */
 	u32	min_tx_rate;
 	u32	max_tx_rate;
 	void	*hwrm_cmd_req_addr;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index 6ea3df6d..cea2f99 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -85,11 +85,10 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting)
 	if (old_setting == setting)
 		return 0;
 
-	func_flags = vf->func_flags;
 	if (setting)
-		func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE;
+		func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE;
 	else
-		func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE;
+		func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE;
 	/*TODO: if the driver supports VLAN filter on guest VLAN,
 	 * the spoof check should also include vlan anti-spoofing
 	 */
@@ -98,7 +97,6 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting)
 	req.flags = cpu_to_le32(func_flags);
 	rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
 	if (!rc) {
-		vf->func_flags = func_flags;
 		if (setting)
 			vf->flags |= BNXT_VF_SPOOFCHK;
 		else
@@ -228,7 +226,6 @@ int bnxt_set_vf_mac(struct net_device *dev, int vf_id, u8 *mac)
 	memcpy(vf->mac_addr, mac, ETH_ALEN);
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR);
 	memcpy(req.dflt_mac_addr, mac, ETH_ALEN);
 	return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
@@ -266,7 +263,6 @@ int bnxt_set_vf_vlan(struct net_device *dev, int vf_id, u16 vlan_id, u8 qos,
 
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.dflt_vlan = cpu_to_le16(vlan_tag);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_VLAN);
 	rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
@@ -305,7 +301,6 @@ int bnxt_set_vf_bw(struct net_device *dev, int vf_id, int min_tx_rate,
 		return 0;
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_MAX_BW);
 	req.max_bw = cpu_to_le32(max_tx_rate);
 	req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_MIN_BW);
@@ -477,7 +472,6 @@ static void __bnxt_set_vf_params(struct bnxt *bp, int vf_id)
 	vf = &bp->pf.vf[vf_id];
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 
 	if (is_valid_ether_addr(vf->mac_addr)) {
 		req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR);
-- 
2.5.1


  reply	other threads:[~2020-04-26 20:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-26 20:24 [PATCH net 0/5] bnxt_en: Bug fixes Michael Chan
2020-04-26 20:24 ` Michael Chan [this message]
2020-04-26 20:24 ` [PATCH net 2/5] bnxt_en: Reduce BNXT_MSIX_VEC_MAX value to supported CQs per PF Michael Chan
2020-04-26 20:24 ` [PATCH net 3/5] bnxt_en: Improve AER slot reset Michael Chan
2020-04-26 20:24 ` [PATCH net 4/5] bnxt_en: Return error when allocating zero size context memory Michael Chan
2020-04-26 20:24 ` [PATCH net 5/5] bnxt_en: Fix VLAN acceleration handling in bnxt_fix_features() Michael Chan
2020-04-27 18:45 ` [PATCH net 0/5] bnxt_en: Bug fixes David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1587932682-1212-2-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.