[PATCH v1 5/7] arm: dts: s700: add node for ethernet controller

From: Amit Singh Tomar <amittomer25@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller
Date: Sat,  9 May 2020 19:55:13 +0530	[thread overview]
Message-ID: <1589034315-19722-6-git-send-email-amittomer25@gmail.com> (raw)
In-Reply-To: <1589034315-19722-1-git-send-email-amittomer25@gmail.com>

This patch adds node for ethernet controller found on Action Semi OWL
S700 SoC.

Since, there is no upstream Linux binding exist for S700 ethernet
controller, Changes are put in u-boot specific dtsi file.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
 arch/arm/dts/s700-u-boot.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi
index a527cccc75f2..1b2768272c62 100644
--- a/arch/arm/dts/s700-u-boot.dtsi
+++ b/arch/arm/dts/s700-u-boot.dtsi
@@ -6,6 +6,19 @@
 /{
 	soc {
 		u-boot,dm-pre-reloc;
+
+		gmac:  ethernet at e0220000 {
+			compatible = "actions,s700-ethernet";
+			reg = <0 0xe0220000 0 0x2000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			local-mac-address = [ 00 18 fe 66 66 66 ];
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "ethernet", "rmii_ref";
+			phy-mode = "rmii";
+			status = "okay";
+                };
+
 	};
 };
 
-- 
2.7.4
