[Qemu-devel] [Bug 1657538] [NEW] qemu 2.7.x 2.8 softmmu dont work on BE machine

[Qemu-devel] [Bug 1657538] [NEW] qemu 2.7.x 2.8 softmmu dont work on BE machine

[luigiburdo]

Public bug reported:

Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

with :
 ./qemu-system-i386 
Gtk-Message: Failed to load module "overlay-scrollbar"
qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
This usually means one of the following happened:

(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
(3) Your guest kernel has a bug and crashed by jumping off into nowhere

This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

Execution cannot continue; stopping here.


I try to add the -L option with ../pc-bios/bios.bin 
and have the same result.

note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
mode have issue.


tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
thanks
Luigi

** Affects: qemu
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Thomas Huth]

I can not reproduce this issue. QEMU 2.8 works fine here on a POWER8 big
endian host (running RHEL7). Can you still run older versions of QEMU
that used to work for you in the past, to check whether it is QEMU or
whether it is Ubuntu 16.10 that is causing the trouble here? Could you
please also post the full output of the "configure" run on your system?

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Thomas Huth]

Something else to try: Could you please check whether you get any output
when you run "qemu-system-ppc -nographic" on your system? So we can make
sure that it is not related to GTK or something similar...

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[luigiburdo]

Hi Thomas,
here the configure .. i made a clean one just with the target for have fastest build 
will report soon the result with the nographic just the time of build

src/qemu$ ./configure  --target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu
Install prefix    /usr/local
BIOS directory    /usr/local/share/qemu
binary directory  /usr/local/bin
library directory /usr/local/lib
module directory  /usr/local/lib/qemu
libexec directory /usr/local/libexec
include directory /usr/local/include
config directory  /usr/local/etc
local state directory   /usr/local/var
Manual directory  /usr/local/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path       /home/amigaone/src/qemu
C compiler        cc
Host C compiler   cc
C++ compiler      c++
Objective-C compiler clang
ARFLAGS           rv
CFLAGS            -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g 
QEMU_CFLAGS       -I/usr/include/pixman-1    -Werror -DHAS_LIBSSH2_SFTP_FSYNC -pthread -I/usr/include/glib-2.0 -I/usr/lib/powerpc-linux-gnu/glib-2.0/include   -D_GNU_SOURCE -I/usr/include/ncursesw   -m32 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv  -Wendif-labels -Wno-shift-negative-value -Wmissing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong      -I/usr/local/include/libpng12   -I/usr/local/include/cacard -I/usr/include/nss -I/usr/include/nspr   -I/usr/include/libusb-1.0    
LDFLAGS           -Wl,--warn-common -m32 -g 
make              make
install           install
python            python -B
smbd              /usr/sbin/smbd
module support    no
host CPU          ppc
host big endian   yes
target list       i386-softmmu ppc-softmmu ppc64-softmmu
tcg debug enabled no
gprof enabled     no
sparse enabled    no
strip binaries    yes
profiler          no
static build      no
pixman            system
SDL support       yes (1.2.15)
GTK support       yes (2.24.30)
GTK GL support    no
VTE support       no 
TLS priority      NORMAL
GNUTLS support    no
GNUTLS rnd        no
libgcrypt         yes
libgcrypt kdf     yes
nettle            no 
nettle kdf        no
libtasn1          no
curses support    yes
virgl support     yes
curl support      yes
mingw32 support   no
Audio drivers     oss
Block whitelist (rw) 
Block whitelist (ro) 
VirtFS support    yes
VNC support       yes
VNC SASL support  yes
VNC JPEG support  yes
VNC PNG support   yes
xen support       no
brlapi support    yes
bluez  support    yes
Documentation     yes
PIE               no
vde support       no
netmap support    no
Linux AIO support yes
ATTR/XATTR support yes
Install blobs     yes
KVM support       yes
COLO support      yes
RDMA support      yes
TCG interpreter   no
fdt support       yes
preadv support    yes
fdatasync         yes
madvise           yes
posix_madvise     yes
libcap-ng support yes
vhost-net support yes
vhost-scsi support yes
vhost-vsock support yes
Trace backends    log
spice support     no 
rbd support       yes
xfsctl support    yes
smartcard support yes
libusb            yes
usb net redir     yes
OpenGL support    yes
OpenGL dmabufs    yes
libiscsi support  yes
libnfs support    yes
build guest agent yes
QGA VSS support   no
QGA w32 disk info no
QGA MSI support   no
seccomp support   yes
coroutine backend ucontext
coroutine pool    yes
debug stack usage no
GlusterFS support no
Archipelago support no
gcov              gcov
gcov enabled      no
TPM support       yes
libssh2 support   yes
TPM passthrough   no
QOM debugging     yes
lzo support       yes
snappy support    yes
bzip2 support     yes
NUMA host support yes
tcmalloc support  no
jemalloc support  no
avx2 optimization no
replication support yes

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[luigiburdo]

i386-softmmu:
./qemu-system-i386 -nographic
qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
This usually means one of the following happened: and so and so 

./qemu-system-ppc -nographic 
nothing happen ... no exit on console .


on 2.6.2 i have:

qemu-system-ppc -nographic

>> =============================================================
>> OpenBIOS 1.1 [Apr 18 2016 08:20]
>> Configuration device id QEMU version 1 machine id 2
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,750
milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:20
Trying hd:,\\:tbxi...
Trying hd:,\ppc\bootinfo.txt...
Trying hd:,%BOOT...


note the 2.6.2 work, before on 2.6.1 i had the same issue of 2.7 and 2.8

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Cameron Kaiser]

I can reproduce the same problem on 2.7.0 on a PowerPC G5 for the x86,
x86_64 and ppc softmmu targets (minus the Gtk problem, since I use this
ported to Cocoa). As with Luigi this seems to be a regression from
2.6.2. There is no change with -nographic.

See also: https://bugzilla.redhat.com/show_bug.cgi?id=1332449

The commenter indicates several BE issues were detected. I have not yet
heard from him regarding his patches or whether they were upstreamed
here.

** Bug watch added: Red Hat Bugzilla #1332449
   https://bugzilla.redhat.com/show_bug.cgi?id=1332449

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Qemu-devel] [Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[luigiburdo]

Oh my gosh the great Cameron Kaiser :)

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  New

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Thomas Huth]

Looking through old bug tickets ... can you still reproduce the issue
with the latest version of QEMU (v4.2) and a more recent Linux
distribution?

** Changed in: qemu
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  Incomplete

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Thomas Huth]

** Bug watch removed: Red Hat Bugzilla #1332449
   https://bugzilla.redhat.com/show_bug.cgi?id=1332449

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  Incomplete

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions

[Bug 1657538] Re: qemu 2.7.x 2.8 softmmu dont work on BE machine

[Launchpad Bug Tracker]

[Expired for QEMU because there has been no activity for 60 days.]

** Changed in: qemu
       Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1657538

Title:
  qemu 2.7.x 2.8 softmmu dont work on BE machine

Status in QEMU:
  Expired

Bug description:
  Build on Be machine qemu 2.7.1 and 2.8 in pure softmmu (tgc) dont work on big endian hardware .
  tested with ppc-softmmu,i386-softmmu,arm-softmmu same result:

  with :
   ./qemu-system-i386 
  Gtk-Message: Failed to load module "overlay-scrollbar"
  qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000
  This usually means one of the following happened:

  (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine)
  (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end
  (3) Your guest kernel has a bug and crashed by jumping off into nowhere

  This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine.
  If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point.

  Execution cannot continue; stopping here.

  
  I try to add the -L option with ../pc-bios/bios.bin 
  and have the same result.

  note the ppc-softmmu and ppc64-softmmu work in kvm mode only emulated
  mode have issue.

  
  tested on my hardware a  Qriq P5040 and G5 4x970MP with Ubuntu Mate 16.10 
  thanks
  Luigi

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1657538/+subscriptions