All of lore.kernel.org
 help / color / mirror / Atom feed
* [bpf-next PATCH v2 00/12] bpf: selftests, test_sockmap improvements
@ 2020-05-13 19:12 John Fastabend
  2020-05-13 19:12 ` [bpf-next PATCH v2 01/12] bpf: sockmap, msg_pop_data can incorrecty set an sge length John Fastabend
                   ` (12 more replies)
  0 siblings, 13 replies; 14+ messages in thread
From: John Fastabend @ 2020-05-13 19:12 UTC (permalink / raw)
  To: lmb, jakub, daniel; +Cc: netdev, bpf, john.fastabend, ast

Note: requires fixes listed below to be merged into bpf-next before
      applied.

Update test_sockmap to add ktls tests and in the process make output
easier to understand and reduce overall runtime significantly. Before
this series test_sockmap did a poor job of tracking sent bytes causing
the recv thread to wait for a timeout even though all expected bytes
had been received. Doing this many times causes significant delays.
Further, we did many redundant tests because the send/recv test we used
was not specific to the parameters we were testing. For example testing
a failure case that always fails many times with different send sizes
is mostly useless. If the test condition catches 10B in the kernel code
testing 100B, 1kB, 4kB, and so on is just noise.

The main motivation for this is to add ktls tests, the last patch. Until
now I have been running these locally but we haven't had them checked in
to selftests. And finally I'm hoping to get these pushed into the libbpf
test infrastructure so we can get more testing. For that to work we need
ability to white and blacklist tests based on kernel features so we add
that here as well.

The new output looks like this broken into test groups with subtest
counters,

 $ time sudo ./test_sockmap
 # 1/ 6  sockmap:txmsg test passthrough:OK
 # 2/ 6  sockmap:txmsg test redirect:OK
 ...
 #22/ 1 sockhash:txmsg test push/pop data:OK
 Pass: 22 Fail: 0

 real    0m9.790s
 user    0m0.093s
 sys     0m7.318s

The old output printed individual subtest and was rather noisy

 $ time sudo ./test_sockmap
 [TEST 0]: (1, 1, 1, sendmsg, pass,): PASS
 ...
 [TEST 823]: (16, 1, 100, sendpage, ... ,pop (1599,1609),): PASS
 Summary: 824 PASSED 0 FAILED

 real    0m56.761s
 user    0m0.455s
 sys     0m31.757s

So we are able to reduce time from ~56s to ~10s. To recover older more
verbose output simply run with --verbose option. To whitelist and
blacklist tests use the new --whitelist and --blacklist flags added. For
example to run cork sockhash tests but only ones that don't have a receive
hang (used to test negative cases) we could do,

 $ ./test_sockmap --whitelist="cork" --blacklist="sockmap,hang"

Requires these two fixes from net tree,

https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=3e104c23816220919ea1b3fd93fabe363c67c484
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=81aabbb9fb7b4b1efd073b62f0505d3adad442f3

v1->v2: Addressed Jakub's comments, exit to _exit and strerror typo.
        Added Jakubs Reviewed-by tag, Thanks!

---

John Fastabend (12):
      bpf: sockmap, msg_pop_data can incorrecty set an sge length
      bpf: sockmap, bpf_tcp_ingress needs to subtract bytes from sg.size
      bpf: selftests, move sockmap bpf prog header into progs
      bpf: selftests, remove prints from sockmap tests
      bpf: selftests, sockmap test prog run without setting cgroup
      bpf: selftests, print error in test_sockmap error cases
      bpf: selftests, improve test_sockmap total bytes counter
      bpf: selftests, break down test_sockmap into subtests
      bpf: selftests, provide verbose option for selftests execution
      bpf: selftests, add whitelist option to test_sockmap
      bpf: selftests, add blacklist to test_sockmap
      bpf: selftests, add ktls tests to test_sockmap


 .../selftests/bpf/progs/test_sockmap_kern.h        |  299 +++++++
 tools/testing/selftests/bpf/test_sockmap.c         |  913 ++++++++++----------
 tools/testing/selftests/bpf/test_sockmap_kern.h    |  451 ----------
 3 files changed, 770 insertions(+), 893 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/progs/test_sockmap_kern.h
 delete mode 100644 tools/testing/selftests/bpf/test_sockmap_kern.h

--
Signature

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2020-05-16  1:02 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-13 19:12 [bpf-next PATCH v2 00/12] bpf: selftests, test_sockmap improvements John Fastabend
2020-05-13 19:12 ` [bpf-next PATCH v2 01/12] bpf: sockmap, msg_pop_data can incorrecty set an sge length John Fastabend
2020-05-13 19:12 ` [bpf-next PATCH v2 02/12] bpf: sockmap, bpf_tcp_ingress needs to subtract bytes from sg.size John Fastabend
2020-05-13 19:13 ` [bpf-next PATCH v2 03/12] bpf: selftests, move sockmap bpf prog header into progs John Fastabend
2020-05-13 19:13 ` [bpf-next PATCH v2 04/12] bpf: selftests, remove prints from sockmap tests John Fastabend
2020-05-13 19:13 ` [bpf-next PATCH v2 05/12] bpf: selftests, sockmap test prog run without setting cgroup John Fastabend
2020-05-13 19:14 ` [bpf-next PATCH v2 06/12] bpf: selftests, print error in test_sockmap error cases John Fastabend
2020-05-13 19:14 ` [bpf-next PATCH v2 07/12] bpf: selftests, improve test_sockmap total bytes counter John Fastabend
2020-05-13 19:14 ` [bpf-next PATCH v2 08/12] bpf: selftests, break down test_sockmap into subtests John Fastabend
2020-05-13 19:15 ` [bpf-next PATCH v2 09/12] bpf: selftests, provide verbose option for selftests execution John Fastabend
2020-05-13 19:15 ` [bpf-next PATCH v2 10/12] bpf: selftests, add whitelist option to test_sockmap John Fastabend
2020-05-13 19:15 ` [bpf-next PATCH v2 11/12] bpf: selftests, add blacklist " John Fastabend
2020-05-13 19:16 ` [bpf-next PATCH v2 12/12] bpf: selftests, add ktls tests " John Fastabend
2020-05-16  1:02 ` [bpf-next PATCH v2 00/12] bpf: selftests, test_sockmap improvements Daniel Borkmann

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.