[PATCH 0/7] staging: most: usb: fix issues found in code audit

[PATCH 0/7] staging: most: usb: fix issues found in code audit

[Christian Gromm]

This series fixes the comments/findings on the previously submitted code
of the USB adapter driver. The fixes should be applied in staging before
moving the driver out as one patch.

Christian Gromm (7):
  staging: most: usb: use dev_*() functions to print messages
  staging: most: usb: remove reference to USB error codes
  staging: most: usb: check number of reported endpoints
  staging: most: usb: use dev_dbg function
  staging: most: fix typo in Kconfig
  staging: most: usb: use macro ATTRIBUTE_GROUPS
  Documentation: ABI: correct sysfs attribute description of MOST driver

 Documentation/ABI/testing/sysfs-bus-most | 104 ++++++++++++++++---------------
 drivers/staging/most/usb/Kconfig         |   2 +-
 drivers/staging/most/usb/usb.c           |  46 ++++++--------
 3 files changed, 72 insertions(+), 80 deletions(-)

-- 
2.7.4

[PATCH 0/7] staging: most: usb: fix issues found in code audit

[Christian Gromm]

This series fixes the comments/findings on the previously submitted code
of the USB adapter driver. The fixes should be applied in staging before
moving the driver out as one patch.

Christian Gromm (7):
  staging: most: usb: use dev_*() functions to print messages
  staging: most: usb: remove reference to USB error codes
  staging: most: usb: check number of reported endpoints
  staging: most: usb: use dev_dbg function
  staging: most: fix typo in Kconfig
  staging: most: usb: use macro ATTRIBUTE_GROUPS
  Documentation: ABI: correct sysfs attribute description of MOST driver

 Documentation/ABI/testing/sysfs-bus-most | 104 ++++++++++++++++---------------
 drivers/staging/most/usb/Kconfig         |   2 +-
 drivers/staging/most/usb/usb.c           |  46 ++++++--------
 3 files changed, 72 insertions(+), 80 deletions(-)

-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 1/7] staging: most: usb: use dev_*() functions to print messages

[Christian Gromm]

This patch removes the pr_*() functions and uses dev_*() instead.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index a4bf362..85d4fa0 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2013-2015 Microchip Technology Germany II GmbH & Co. KG
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/usb.h>
@@ -186,13 +185,14 @@ static inline int start_sync_ep(struct usb_device *usb_dev, u16 ep)
  * get_stream_frame_size - calculate frame size of current configuration
  * @cfg: channel configuration
  */
-static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
+static unsigned int get_stream_frame_size(struct most_channel_config *cfg,
+					  struct device *dev)
 {
 	unsigned int frame_size = 0;
 	unsigned int sub_size = cfg->subbuffer_size;
 
 	if (!sub_size) {
-		pr_warn("Misconfig: Subbuffer size zero.\n");
+		dev_warn(dev, "Misconfig: Subbuffer size zero.\n");
 		return frame_size;
 	}
 	switch (cfg->data_type) {
@@ -201,7 +201,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		break;
 	case MOST_CH_SYNC:
 		if (cfg->packets_per_xact == 0) {
-			pr_warn("Misconfig: Packets per XACT zero\n");
+			dev_warn(dev, "Misconfig: Packets per XACT zero\n");
 			frame_size = 0;
 		} else if (cfg->packets_per_xact == 0xFF) {
 			frame_size = (USB_MTU / sub_size) * sub_size;
@@ -210,7 +210,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		}
 		break;
 	default:
-		pr_warn("Query frame size of non-streaming channel\n");
+		dev_warn(dev, "Query frame size of non-streaming channel\n");
 		break;
 	}
 	return frame_size;
@@ -270,7 +270,7 @@ static int hdm_poison_channel(struct most_interface *iface, int channel)
 static int hdm_add_padding(struct most_dev *mdev, int channel, struct mbo *mbo)
 {
 	struct most_channel_config *conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -304,7 +304,7 @@ static int hdm_remove_padding(struct most_dev *mdev, int channel,
 			      struct mbo *mbo)
 {
 	struct most_channel_config *const conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -697,7 +697,7 @@ static int hdm_configure_channel(struct most_interface *iface, int channel,
 
 	mdev->padding_active[channel] = true;
 
-	frame_size = get_stream_frame_size(conf);
+	frame_size = get_stream_frame_size(conf, &mdev->dev);
 	if (frame_size == 0 || frame_size > USB_MTU) {
 		dev_warn(dev, "Misconfig: frame size wrong\n");
 		return -EINVAL;
-- 
2.7.4

[PATCH 1/7] staging: most: usb: use dev_*() functions to print messages

[Christian Gromm]

This patch removes the pr_*() functions and uses dev_*() instead.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index a4bf362..85d4fa0 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2013-2015 Microchip Technology Germany II GmbH & Co. KG
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/usb.h>
@@ -186,13 +185,14 @@ static inline int start_sync_ep(struct usb_device *usb_dev, u16 ep)
  * get_stream_frame_size - calculate frame size of current configuration
  * @cfg: channel configuration
  */
-static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
+static unsigned int get_stream_frame_size(struct most_channel_config *cfg,
+					  struct device *dev)
 {
 	unsigned int frame_size = 0;
 	unsigned int sub_size = cfg->subbuffer_size;
 
 	if (!sub_size) {
-		pr_warn("Misconfig: Subbuffer size zero.\n");
+		dev_warn(dev, "Misconfig: Subbuffer size zero.\n");
 		return frame_size;
 	}
 	switch (cfg->data_type) {
@@ -201,7 +201,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		break;
 	case MOST_CH_SYNC:
 		if (cfg->packets_per_xact == 0) {
-			pr_warn("Misconfig: Packets per XACT zero\n");
+			dev_warn(dev, "Misconfig: Packets per XACT zero\n");
 			frame_size = 0;
 		} else if (cfg->packets_per_xact == 0xFF) {
 			frame_size = (USB_MTU / sub_size) * sub_size;
@@ -210,7 +210,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		}
 		break;
 	default:
-		pr_warn("Query frame size of non-streaming channel\n");
+		dev_warn(dev, "Query frame size of non-streaming channel\n");
 		break;
 	}
 	return frame_size;
@@ -270,7 +270,7 @@ static int hdm_poison_channel(struct most_interface *iface, int channel)
 static int hdm_add_padding(struct most_dev *mdev, int channel, struct mbo *mbo)
 {
 	struct most_channel_config *conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -304,7 +304,7 @@ static int hdm_remove_padding(struct most_dev *mdev, int channel,
 			      struct mbo *mbo)
 {
 	struct most_channel_config *const conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -697,7 +697,7 @@ static int hdm_configure_channel(struct most_interface *iface, int channel,
 
 	mdev->padding_active[channel] = true;
 
-	frame_size = get_stream_frame_size(conf);
+	frame_size = get_stream_frame_size(conf, &mdev->dev);
 	if (frame_size == 0 || frame_size > USB_MTU) {
 		dev_warn(dev, "Misconfig: frame size wrong\n");
 		return -EINVAL;
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 2/7] staging: most: usb: remove reference to USB error codes

[Christian Gromm]

This patch removes the reference to the driver API file for USB error
codes.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 85d4fa0..76963c0 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -477,8 +477,6 @@ static void hdm_write_completion(struct urb *urb)
  * controller use to indicate a transfer has failed because of device
  * disconnect.  In the interval before the hub driver starts disconnect
  * processing, devices may receive such fault reports for every request.
- *
- * See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>
  */
 static void hdm_read_completion(struct urb *urb)
 {
-- 
2.7.4

[PATCH 2/7] staging: most: usb: remove reference to USB error codes

[Christian Gromm]

This patch removes the reference to the driver API file for USB error
codes.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 85d4fa0..76963c0 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -477,8 +477,6 @@ static void hdm_write_completion(struct urb *urb)
  * controller use to indicate a transfer has failed because of device
  * disconnect.  In the interval before the hub driver starts disconnect
  * processing, devices may receive such fault reports for every request.
- *
- * See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>
  */
 static void hdm_read_completion(struct urb *urb)
 {
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 3/7] staging: most: usb: check number of reported endpoints

[Christian Gromm]

This patch checks the number of endpoints reported by the USB
interface descriptor and throws an error if the number exceeds
MAX_NUM_ENDPOINTS.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 76963c0..25e114d 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1045,13 +1045,17 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 	unsigned int num_endpoints;
 	struct most_channel_capability *tmp_cap;
 	struct usb_endpoint_descriptor *ep_desc;
-	int ret = 0;
+	int ret;
 
 	if (!mdev)
-		goto err_out_of_memory;
+		return -ENOMEM;
 
 	usb_set_intfdata(interface, mdev);
 	num_endpoints = usb_iface_desc->desc.bNumEndpoints;
+	if (num_endpoints > MAX_NUM_ENDPOINTS) {
+		kfree(mdev);
+		return -EINVAL;
+	}
 	mutex_init(&mdev->io_mutex);
 	INIT_WORK(&mdev->poll_work_obj, wq_netinfo);
 	timer_setup(&mdev->link_stat_timer, link_stat_timer_handler, 0);
@@ -1180,11 +1184,6 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 	kfree(mdev->conf);
 err_free_mdev:
 	put_device(&mdev->dev);
-err_out_of_memory:
-	if (ret == 0 || ret == -ENOMEM) {
-		ret = -ENOMEM;
-		dev_err(dev, "out of memory\n");
-	}
 	return ret;
 }
 
-- 
2.7.4

[PATCH 3/7] staging: most: usb: check number of reported endpoints

[Christian Gromm]

This patch checks the number of endpoints reported by the USB
interface descriptor and throws an error if the number exceeds
MAX_NUM_ENDPOINTS.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 76963c0..25e114d 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1045,13 +1045,17 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 	unsigned int num_endpoints;
 	struct most_channel_capability *tmp_cap;
 	struct usb_endpoint_descriptor *ep_desc;
-	int ret = 0;
+	int ret;
 
 	if (!mdev)
-		goto err_out_of_memory;
+		return -ENOMEM;
 
 	usb_set_intfdata(interface, mdev);
 	num_endpoints = usb_iface_desc->desc.bNumEndpoints;
+	if (num_endpoints > MAX_NUM_ENDPOINTS) {
+		kfree(mdev);
+		return -EINVAL;
+	}
 	mutex_init(&mdev->io_mutex);
 	INIT_WORK(&mdev->poll_work_obj, wq_netinfo);
 	timer_setup(&mdev->link_stat_timer, link_stat_timer_handler, 0);
@@ -1180,11 +1184,6 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 	kfree(mdev->conf);
 err_free_mdev:
 	put_device(&mdev->dev);
-err_out_of_memory:
-	if (ret == 0 || ret == -ENOMEM) {
-		ret = -ENOMEM;
-		dev_err(dev, "out of memory\n");
-	}
 	return ret;
 }
 
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 4/7] staging: most: usb: use dev_dbg function

[Christian Gromm]

This patch replaces the functions dev_notice with dev_dbg to silence
the driver during normal operation.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 25e114d..882f59e 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1130,13 +1130,13 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 		init_usb_anchor(&mdev->busy_urbs[i]);
 		spin_lock_init(&mdev->channel_lock[i]);
 	}
-	dev_notice(dev, "claimed gadget: Vendor=%4.4x ProdID=%4.4x Bus=%02x Device=%02x\n",
+	dev_dbg(dev, "claimed gadget: Vendor=%4.4x ProdID=%4.4x Bus=%02x Device=%02x\n",
 		le16_to_cpu(usb_dev->descriptor.idVendor),
 		le16_to_cpu(usb_dev->descriptor.idProduct),
 		usb_dev->bus->busnum,
 		usb_dev->devnum);
 
-	dev_notice(dev, "device path: /sys/bus/usb/devices/%d-%s:%d.%d\n",
+	dev_dbg(dev, "device path: /sys/bus/usb/devices/%d-%s:%d.%d\n",
 		usb_dev->bus->busnum,
 		usb_dev->devpath,
 		usb_dev->config->desc.bConfigurationValue,
-- 
2.7.4

[PATCH 4/7] staging: most: usb: use dev_dbg function

[Christian Gromm]

This patch replaces the functions dev_notice with dev_dbg to silence
the driver during normal operation.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 25e114d..882f59e 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1130,13 +1130,13 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 		init_usb_anchor(&mdev->busy_urbs[i]);
 		spin_lock_init(&mdev->channel_lock[i]);
 	}
-	dev_notice(dev, "claimed gadget: Vendor=%4.4x ProdID=%4.4x Bus=%02x Device=%02x\n",
+	dev_dbg(dev, "claimed gadget: Vendor=%4.4x ProdID=%4.4x Bus=%02x Device=%02x\n",
 		le16_to_cpu(usb_dev->descriptor.idVendor),
 		le16_to_cpu(usb_dev->descriptor.idProduct),
 		usb_dev->bus->busnum,
 		usb_dev->devnum);
 
-	dev_notice(dev, "device path: /sys/bus/usb/devices/%d-%s:%d.%d\n",
+	dev_dbg(dev, "device path: /sys/bus/usb/devices/%d-%s:%d.%d\n",
 		usb_dev->bus->busnum,
 		usb_dev->devpath,
 		usb_dev->config->desc.bConfigurationValue,
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 5/7] staging: most: fix typo in Kconfig

[Christian Gromm]

This patch corrects the typo in the Kconfig file where it says
tranceiver instead of transceiver.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
---
 drivers/staging/most/usb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/most/usb/Kconfig b/drivers/staging/most/usb/Kconfig
index a86f1f6..75dc25c 100644
--- a/drivers/staging/most/usb/Kconfig
+++ b/drivers/staging/most/usb/Kconfig
@@ -7,7 +7,7 @@ config MOST_USB
 	tristate "USB"
 	depends on USB && NET
 	help
-	  Say Y here if you want to connect via USB to network tranceiver.
+	  Say Y here if you want to connect via USB to network transceiver.
 	  This device driver depends on the networking AIM.
 
 	  To compile this driver as a module, choose M here: the
-- 
2.7.4

[PATCH 5/7] staging: most: fix typo in Kconfig

[Christian Gromm]

This patch corrects the typo in the Kconfig file where it says
tranceiver instead of transceiver.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
---
 drivers/staging/most/usb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/most/usb/Kconfig b/drivers/staging/most/usb/Kconfig
index a86f1f6..75dc25c 100644
--- a/drivers/staging/most/usb/Kconfig
+++ b/drivers/staging/most/usb/Kconfig
@@ -7,7 +7,7 @@ config MOST_USB
 	tristate "USB"
 	depends on USB && NET
 	help
-	  Say Y here if you want to connect via USB to network tranceiver.
+	  Say Y here if you want to connect via USB to network transceiver.
 	  This device driver depends on the networking AIM.
 
 	  To compile this driver as a module, choose M here: the
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS

[Christian Gromm]

This patch makes use of the macro ATTRIBUTE_GROUPS to create the groups
instead of defining them manually.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 882f59e..a26e9b1 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1000,14 +1000,7 @@ static struct attribute *dci_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group dci_attr_group = {
-	.attrs = dci_attrs,
-};
-
-static const struct attribute_group *dci_attr_groups[] = {
-	&dci_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(dci);
 
 static void release_dci(struct device *dev)
 {
@@ -1160,7 +1153,7 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 
 		mdev->dci->dev.init_name = "dci";
 		mdev->dci->dev.parent = get_device(mdev->iface.dev);
-		mdev->dci->dev.groups = dci_attr_groups;
+		mdev->dci->dev.groups = dci_groups;
 		mdev->dci->dev.release = release_dci;
 		if (device_register(&mdev->dci->dev)) {
 			mutex_unlock(&mdev->io_mutex);
-- 
2.7.4

[PATCH 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS

[Christian Gromm]

This patch makes use of the macro ATTRIBUTE_GROUPS to create the groups
instead of defining them manually.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/most/usb/usb.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index 882f59e..a26e9b1 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -1000,14 +1000,7 @@ static struct attribute *dci_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group dci_attr_group = {
-	.attrs = dci_attrs,
-};
-
-static const struct attribute_group *dci_attr_groups[] = {
-	&dci_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(dci);
 
 static void release_dci(struct device *dev)
 {
@@ -1160,7 +1153,7 @@ hdm_probe(struct usb_interface *interface, const struct usb_device_id *id)
 
 		mdev->dci->dev.init_name = "dci";
 		mdev->dci->dev.parent = get_device(mdev->iface.dev);
-		mdev->dci->dev.groups = dci_attr_groups;
+		mdev->dci->dev.groups = dci_groups;
 		mdev->dci->dev.release = release_dci;
 		if (device_register(&mdev->dci->dev)) {
 			mutex_unlock(&mdev->io_mutex);
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver

[Christian Gromm]

This patch fixes the ABI description file sysfs-bus-most.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
---
 Documentation/ABI/testing/sysfs-bus-most | 104 ++++++++++++++++---------------
 1 file changed, 53 insertions(+), 51 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most
index 6b1d06e..ec0a603 100644
--- a/Documentation/ABI/testing/sysfs-bus-most
+++ b/Documentation/ABI/testing/sysfs-bus-most
@@ -1,14 +1,14 @@
-What:		/sys/bus/most/devices/.../description
+What:		/sys/bus/most/devices/<dev>/description
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Provides information about the interface type and the physical
-		location of the device. Hardware attached via USB, for instance,
+		Provides information about the physical location of the
+		device. Hardware attached via USB, for instance,
 		might return <1-1.1:1.0>
 Users:
 
-What:		/sys/bus/most/devices/.../interface
+What:		/sys/bus/most/devices/<dev>/interface
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -16,7 +16,7 @@ Description:
 		Indicates the type of peripheral interface the device uses.
 Users:
 
-What:		/sys/bus/most/devices/.../dci
+What:		/sys/bus/most/devices/<dev>/dci
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -26,7 +26,7 @@ Description:
 		write the controller's DCI registers.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/arb_address
+What:		/sys/bus/most/devices/<dev>/dci/arb_address
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -35,7 +35,7 @@ Description:
 		application wants to read from or write to.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/arb_value
+What:		/sys/bus/most/devices/<dev>/dci/arb_value
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -44,7 +44,7 @@ Description:
 		is stored in arb_address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_hi
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_hi
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -52,7 +52,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_lo
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_lo
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -60,7 +60,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_mi
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_mi
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -68,7 +68,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_filter
+What:		/sys/bus/most/devices/<dev>/dci/mep_filter
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -76,7 +76,7 @@ Description:
 		This is used to check and configure the MEP filter address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash0
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash0
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -84,7 +84,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash1
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash1
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -92,7 +92,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash2
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash2
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -100,7 +100,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash3
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash3
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -108,7 +108,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/ni_state
+What:		/sys/bus/most/devices/<dev>/dci/ni_state
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -116,7 +116,7 @@ Description:
 		Indicates the current network interface state.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/node_address
+What:		/sys/bus/most/devices/<dev>/dci/node_address
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -124,7 +124,7 @@ Description:
 		Indicates the current node address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/node_position
+What:		/sys/bus/most/devices/<dev>/dci/node_position
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -132,7 +132,7 @@ Description:
 		Indicates the current node position.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/packet_bandwidth
+What:		/sys/bus/most/devices/<dev>/dci/packet_bandwidth
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -140,7 +140,7 @@ Description:
 		Indicates the configured packet bandwidth.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/sync_ep
+What:		/sys/bus/most/devices/<dev>/dci/sync_ep
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -149,7 +149,7 @@ Description:
 		endpoint.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/
+What:		/sys/bus/most/devices/<dev>/<channel>/
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -160,91 +160,92 @@ Description:
 		configure it.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/available_datatypes
+What:		/sys/bus/most/devices/<dev>/<channel>/available_datatypes
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the data types the current channel can transport.
+		Indicates the data types the channel can transport.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/available_directions
+What:		/sys/bus/most/devices/<dev>/<channel>/available_directions
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the directions the current channel is capable of.
+		Indicates the directions the channel is capable of.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/number_of_packet_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/number_of_packet_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the number of packet buffers the current channel can
+		Indicates the number of packet buffers the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/number_of_stream_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/number_of_stream_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the number of streaming buffers the current channel can
+		Indicates the number of streaming buffers the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/size_of_packet_buffer
+What:		/sys/bus/most/devices/<dev>/<channel>/size_of_packet_buffer
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the size of a packet buffer the current channel can
+		Indicates the size of a packet buffer the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/size_of_stream_buffer
+What:		/sys/bus/most/devices/<dev>/<channel>/size_of_stream_buffer
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the size of a streaming buffer the current channel can
+		Indicates the size of a streaming buffer the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_number_of_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/set_number_of_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the number of buffers of the current channel.
+		This is to read back the configured number of buffers of
+		the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_buffer_size
+What:		/sys/bus/most/devices/<dev>/<channel>/set_buffer_size
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the size of a buffer of the current channel.
+		This is to read back the configured buffer size of the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_direction
+What:		/sys/bus/most/devices/<dev>/<channel>/set_direction
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the direction of the current channel.
+		This is to read back the configured direction of the channel.
 		The following strings will be accepted:
-			'dir_tx',
-			'dir_rx'
+			'tx',
+			'rx'
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_datatype
+What:		/sys/bus/most/devices/<dev>/<channel>/set_datatype
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the data type of the current channel.
+		This is to read back the configured data type of the channel.
 		The following strings will be accepted:
 			'control',
 			'async',
@@ -252,30 +253,31 @@ Description:
 			'isoc_avp'
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_subbuffer_size
+What:		/sys/bus/most/devices/<dev>/<channel>/set_subbuffer_size
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the subbuffer size of the current channel.
+		This is to read back the configured subbuffer size of
+		the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_packets_per_xact
+What:		/sys/bus/most/devices/<dev>/<channel>/set_packets_per_xact
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the number of packets per transaction of
-		the current channel. This is only needed network interface
-		controller is attached via USB.
+		This is to read back the configured number of packets per
+		transaction of the channel. This is only applicable when
+		connected via USB.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/channel_starving
+What:		/sys/bus/most/devices/<dev>/<channel>/channel_starving
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates whether current channel ran out of buffers.
+		Indicates whether channel ran out of buffers.
 Users:
 
 What:		/sys/bus/most/drivers/most_core/components
-- 
2.7.4

[PATCH 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver

[Christian Gromm]

This patch fixes the ABI description file sysfs-bus-most.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
---
 Documentation/ABI/testing/sysfs-bus-most | 104 ++++++++++++++++---------------
 1 file changed, 53 insertions(+), 51 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most
index 6b1d06e..ec0a603 100644
--- a/Documentation/ABI/testing/sysfs-bus-most
+++ b/Documentation/ABI/testing/sysfs-bus-most
@@ -1,14 +1,14 @@
-What:		/sys/bus/most/devices/.../description
+What:		/sys/bus/most/devices/<dev>/description
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Provides information about the interface type and the physical
-		location of the device. Hardware attached via USB, for instance,
+		Provides information about the physical location of the
+		device. Hardware attached via USB, for instance,
 		might return <1-1.1:1.0>
 Users:
 
-What:		/sys/bus/most/devices/.../interface
+What:		/sys/bus/most/devices/<dev>/interface
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -16,7 +16,7 @@ Description:
 		Indicates the type of peripheral interface the device uses.
 Users:
 
-What:		/sys/bus/most/devices/.../dci
+What:		/sys/bus/most/devices/<dev>/dci
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -26,7 +26,7 @@ Description:
 		write the controller's DCI registers.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/arb_address
+What:		/sys/bus/most/devices/<dev>/dci/arb_address
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -35,7 +35,7 @@ Description:
 		application wants to read from or write to.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/arb_value
+What:		/sys/bus/most/devices/<dev>/dci/arb_value
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -44,7 +44,7 @@ Description:
 		is stored in arb_address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_hi
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_hi
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -52,7 +52,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_lo
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_lo
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -60,7 +60,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_eui48_mi
+What:		/sys/bus/most/devices/<dev>/dci/mep_eui48_mi
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -68,7 +68,7 @@ Description:
 		This is used to check and configure the MAC address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_filter
+What:		/sys/bus/most/devices/<dev>/dci/mep_filter
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -76,7 +76,7 @@ Description:
 		This is used to check and configure the MEP filter address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash0
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash0
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -84,7 +84,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash1
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash1
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -92,7 +92,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash2
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash2
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -100,7 +100,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/mep_hash3
+What:		/sys/bus/most/devices/<dev>/dci/mep_hash3
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -108,7 +108,7 @@ Description:
 		This is used to check and configure the MEP hash table.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/ni_state
+What:		/sys/bus/most/devices/<dev>/dci/ni_state
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -116,7 +116,7 @@ Description:
 		Indicates the current network interface state.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/node_address
+What:		/sys/bus/most/devices/<dev>/dci/node_address
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -124,7 +124,7 @@ Description:
 		Indicates the current node address.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/node_position
+What:		/sys/bus/most/devices/<dev>/dci/node_position
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -132,7 +132,7 @@ Description:
 		Indicates the current node position.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/packet_bandwidth
+What:		/sys/bus/most/devices/<dev>/dci/packet_bandwidth
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -140,7 +140,7 @@ Description:
 		Indicates the configured packet bandwidth.
 Users:
 
-What:		/sys/bus/most/devices/.../dci/sync_ep
+What:		/sys/bus/most/devices/<dev>/dci/sync_ep
 Date:		June 2016
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -149,7 +149,7 @@ Description:
 		endpoint.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/
+What:		/sys/bus/most/devices/<dev>/<channel>/
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
@@ -160,91 +160,92 @@ Description:
 		configure it.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/available_datatypes
+What:		/sys/bus/most/devices/<dev>/<channel>/available_datatypes
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the data types the current channel can transport.
+		Indicates the data types the channel can transport.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/available_directions
+What:		/sys/bus/most/devices/<dev>/<channel>/available_directions
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the directions the current channel is capable of.
+		Indicates the directions the channel is capable of.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/number_of_packet_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/number_of_packet_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the number of packet buffers the current channel can
+		Indicates the number of packet buffers the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/number_of_stream_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/number_of_stream_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the number of streaming buffers the current channel can
+		Indicates the number of streaming buffers the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/size_of_packet_buffer
+What:		/sys/bus/most/devices/<dev>/<channel>/size_of_packet_buffer
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the size of a packet buffer the current channel can
+		Indicates the size of a packet buffer the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/size_of_stream_buffer
+What:		/sys/bus/most/devices/<dev>/<channel>/size_of_stream_buffer
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates the size of a streaming buffer the current channel can
+		Indicates the size of a streaming buffer the channel can
 		handle.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_number_of_buffers
+What:		/sys/bus/most/devices/<dev>/<channel>/set_number_of_buffers
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the number of buffers of the current channel.
+		This is to read back the configured number of buffers of
+		the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_buffer_size
+What:		/sys/bus/most/devices/<dev>/<channel>/set_buffer_size
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the size of a buffer of the current channel.
+		This is to read back the configured buffer size of the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_direction
+What:		/sys/bus/most/devices/<dev>/<channel>/set_direction
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the direction of the current channel.
+		This is to read back the configured direction of the channel.
 		The following strings will be accepted:
-			'dir_tx',
-			'dir_rx'
+			'tx',
+			'rx'
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_datatype
+What:		/sys/bus/most/devices/<dev>/<channel>/set_datatype
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the data type of the current channel.
+		This is to read back the configured data type of the channel.
 		The following strings will be accepted:
 			'control',
 			'async',
@@ -252,30 +253,31 @@ Description:
 			'isoc_avp'
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_subbuffer_size
+What:		/sys/bus/most/devices/<dev>/<channel>/set_subbuffer_size
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the subbuffer size of the current channel.
+		This is to read back the configured subbuffer size of
+		the channel.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/set_packets_per_xact
+What:		/sys/bus/most/devices/<dev>/<channel>/set_packets_per_xact
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		This is to configure the number of packets per transaction of
-		the current channel. This is only needed network interface
-		controller is attached via USB.
+		This is to read back the configured number of packets per
+		transaction of the channel. This is only applicable when
+		connected via USB.
 Users:
 
-What:		/sys/bus/most/devices/.../<channel>/channel_starving
+What:		/sys/bus/most/devices/<dev>/<channel>/channel_starving
 Date:		March 2017
 KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
-		Indicates whether current channel ran out of buffers.
+		Indicates whether channel ran out of buffers.
 Users:
 
 What:		/sys/bus/most/drivers/most_core/components
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 2/7] staging: most: usb: remove reference to USB error codes

[Greg KH]

On Thu, May 14, 2020 at 03:46:24PM +0200, Christian Gromm wrote:
> This patch removes the reference to the driver API file for USB error
> codes.
> 
> Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/staging/most/usb/usb.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
> index 85d4fa0..76963c0 100644
> --- a/drivers/staging/most/usb/usb.c
> +++ b/drivers/staging/most/usb/usb.c
> @@ -477,8 +477,6 @@ static void hdm_write_completion(struct urb *urb)
>   * controller use to indicate a transfer has failed because of device
>   * disconnect.  In the interval before the hub driver starts disconnect
>   * processing, devices may receive such fault reports for every request.
> - *
> - * See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>

Remove the whole text above this as well, as that just duplicates what
is written here and isn't needed at all as we all "know" the different
values that urb status returns.

thanks,

greg k-h

Re: [PATCH 2/7] staging: most: usb: remove reference to USB error codes

[Greg KH]

On Thu, May 14, 2020 at 03:46:24PM +0200, Christian Gromm wrote:
> This patch removes the reference to the driver API file for USB error
> codes.
> 
> Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/staging/most/usb/usb.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
> index 85d4fa0..76963c0 100644
> --- a/drivers/staging/most/usb/usb.c
> +++ b/drivers/staging/most/usb/usb.c
> @@ -477,8 +477,6 @@ static void hdm_write_completion(struct urb *urb)
>   * controller use to indicate a transfer has failed because of device
>   * disconnect.  In the interval before the hub driver starts disconnect
>   * processing, devices may receive such fault reports for every request.
> - *
> - * See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>

Remove the whole text above this as well, as that just duplicates what
is written here and isn't needed at all as we all "know" the different
values that urb status returns.

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints

[Greg KH]

On Thu, May 14, 2020 at 03:46:25PM +0200, Christian Gromm wrote:
> This patch checks the number of endpoints reported by the USB
> interface descriptor and throws an error if the number exceeds
> MAX_NUM_ENDPOINTS.
> 
> Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/staging/most/usb/usb.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)

This is a bugfix that should get backported to stable kernels, right?

thanks,

greg k-h

Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints

[Greg KH]

On Thu, May 14, 2020 at 03:46:25PM +0200, Christian Gromm wrote:
> This patch checks the number of endpoints reported by the USB
> interface descriptor and throws an error if the number exceeds
> MAX_NUM_ENDPOINTS.
> 
> Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/staging/most/usb/usb.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)

This is a bugfix that should get backported to stable kernels, right?

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints

[Christian.Gromm]

On Thu, 2020-05-14 at 16:06 +0200, Greg KH wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> On Thu, May 14, 2020 at 03:46:25PM +0200, Christian Gromm wrote:
> > This patch checks the number of endpoints reported by the USB
> > interface descriptor and throws an error if the number exceeds
> > MAX_NUM_ENDPOINTS.
> > 
> > Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> > Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/staging/most/usb/usb.c | 13 ++++++-------
> >  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> This is a bugfix that should get backported to stable kernels, right?
> 

Right. I already sent out a v2 of the series.
Should I resend?

thanks,
Chris

Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints

[Christian.Gromm]

On Thu, 2020-05-14 at 16:06 +0200, Greg KH wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> On Thu, May 14, 2020 at 03:46:25PM +0200, Christian Gromm wrote:
> > This patch checks the number of endpoints reported by the USB
> > interface descriptor and throws an error if the number exceeds
> > MAX_NUM_ENDPOINTS.
> > 
> > Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
> > Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/staging/most/usb/usb.c | 13 ++++++-------
> >  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> This is a bugfix that should get backported to stable kernels, right?
> 

Right. I already sent out a v2 of the series.
Should I resend?

thanks,
Chris

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel