All of lore.kernel.org
 help / color / mirror / Atom feed
From: Avri Altman <avri.altman@wdc.com>
To: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>,
	alim.akhtar@samsung.com, asutoshd@codeaurora.org,
	Zang Leigang <zangleigang@hisilicon.com>,
	Avi Shchislowski <avi.shchislowski@wdc.com>,
	Bean Huo <beanhuo@micron.com>,
	cang@codeaurora.org, stanley.chu@mediatek.com,
	MOHAMMED RAFIQ KAMAL BASHA <md.rafiq@samsung.com>,
	Sang-yoon Oh <sangyoon.oh@samsung.com>,
	yongmyung lee <ymhungry.lee@samsung.com>,
	Jinyoung CHOI <j-young.choi@samsung.com>,
	Avri Altman <avri.altman@wdc.com>
Subject: [RFC PATCH 04/13] scsi: ufs: ufshpb: Init part II - Attach scsi device
Date: Fri, 15 May 2020 13:30:05 +0300	[thread overview]
Message-ID: <1589538614-24048-5-git-send-email-avri.altman@wdc.com> (raw)
In-Reply-To: <1589538614-24048-1-git-send-email-avri.altman@wdc.com>

The ufs boot process is essentially comprised of 2 parts: first a
handshake with the device, and then, scsi scans and assign a scsi device
to each lun.  The latter, although running a-synchronically, is
happening right after reading the device configuration - lun by lun.

By now we've read the device HPB configuration, and we are ready  to
attach a scsi device to our HPB luns.  A perfect timing might be while
scsi is performing its .slave_alloc() or .slave_configure().

Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
 drivers/scsi/ufs/ufshcd.c |   3 ++
 drivers/scsi/ufs/ufshpb.c | 103 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshpb.h |   3 ++
 3 files changed, 109 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index bffe699..c2011bf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4628,6 +4628,9 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
 
 	ufshcd_get_lu_power_on_wp_status(hba, sdev);
 
+	if (ufshcd_is_hpb_supported(hba))
+		ufshpb_attach_sdev(hba, sdev);
+
 	return 0;
 }
 
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index e94e699..4a10e7b 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -7,7 +7,9 @@
  */
 
 #include <asm/unaligned.h>
+#include <scsi/scsi_dh.h>
 #include <scsi/scsi_dh_ufshpb.h>
+#include "../scsi_priv.h"
 #include "ufshcd.h"
 #include "ufs.h"
 #include "ufshpb.h"
@@ -25,6 +27,7 @@ enum ufshpb_control_modes {
 
 struct ufshpb_lun {
 	u8 lun;
+	struct scsi_device *sdev;
 };
 
 
@@ -34,6 +37,91 @@ struct ufshpb_lun *ufshpb_luns;
 static unsigned long ufshpb_lun_map[BITS_TO_LONGS(UFSHPB_MAX_LUNS)];
 static u8 ufshpb_lun_lookup[UFSHPB_MAX_LUNS];
 
+void ufshpb_remove_lun(u8 lun)
+{
+	struct ufshpb_lun *hpb;
+
+	if (!ufshpb_luns)
+		return;
+
+	hpb = ufshpb_luns + lun;
+	if (hpb->sdev && hpb->sdev->handler_data) {
+		if (scsi_device_get(hpb->sdev))
+			return;
+
+		scsi_dh_release_device(hpb->sdev);
+		scsi_device_put(hpb->sdev);
+	}
+}
+
+/**
+ * ufshpb_attach_sdev - attach and activate a hpb device handler
+ * @hba: per adapter object
+ * @sdev: scsi device that owns that handler
+ *
+ * Called during .slave_alloc(), and after ufshpb_probe() read the device hpb
+ * configuration.
+ */
+void ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev)
+{
+	struct ufshpb_lun *hpb_lun;
+	struct ufshpb_dh_data {
+		struct ufshpb_config *c;
+		struct ufshpb_lun_config *lc;
+	} h;
+	int ret = -EINVAL;
+	u8 lun = sdev->lun;
+	u8 i;
+
+	/* ignore w-luns as those can't be hpb luns */
+	if (lun >= UFSHPB_MAX_LUNS)
+		return;
+
+	/* ignore non-hpb luns */
+	if (!test_bit(lun, ufshpb_lun_map))
+		return;
+
+	i = ufshpb_lun_lookup[lun];
+
+	if (sdev->handler && sdev->handler_data) {
+		dev_err(hba->dev, "trying to re-attach lun %d ?\n", lun);
+		goto out;
+	}
+
+	if (!ufshpb_luns) {
+		dev_err(hba->dev, "HPB was already removed\n");
+		goto out;
+	}
+
+	if (scsi_device_get(sdev)) {
+		dev_err(hba->dev, "failed to get sdev for lun %d\n", lun);
+		goto out;
+	}
+
+	hpb_lun = ufshpb_luns + i;
+	hpb_lun->sdev = sdev;
+
+	ret = scsi_dh_attach(sdev->request_queue, "ufshpb");
+	if (ret || !sdev->handler || !sdev->handler_data)
+		goto put_scsi_dev;
+
+	h.c = ufshpb_conf;
+	h.lc = ufshpb_luns_conf + i;
+
+	memcpy(sdev->handler_data, &h, sizeof(h));
+
+	ret = scsi_dh_activate(sdev->request_queue, NULL, NULL);
+
+put_scsi_dev:
+	scsi_device_put(sdev);
+
+out:
+	if (ret) {
+		dev_err(hba->dev, "attach sdev to HPB lun %d failed\n", lun);
+		ufshpb_remove_lun(i);
+	}
+}
+
 /**
  * ufshpb_remove - ufshpb cleanup
  *
@@ -41,9 +129,24 @@ static u8 ufshpb_lun_lookup[UFSHPB_MAX_LUNS];
  */
 void ufshpb_remove(struct ufs_hba *hba)
 {
+	if (!ufshpb_conf)
+		goto remove_hpb;
+
+	if (ufshpb_luns) {
+		unsigned int num_hpb_luns = ufshpb_conf->num_hpb_luns;
+		int i;
+
+		spin_lock(hba->host->host_lock);
+		for (i = 0; i < num_hpb_luns; i++)
+			ufshpb_remove_lun(i);
+		spin_unlock(hba->host->host_lock);
+	}
+
 	kfree(ufshpb_conf);
 	kfree(ufshpb_luns_conf);
 	kfree(ufshpb_luns);
+
+remove_hpb:
 	ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG,
 			  QUERY_FLAG_IDN_HPB_RESET, 0, NULL);
 }
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index ee990f4..276a749 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -14,9 +14,12 @@ struct ufs_hba;
 #ifdef CONFIG_SCSI_UFS_HPB
 void ufshpb_remove(struct ufs_hba *hba);
 int ufshpb_probe(struct ufs_hba *hba);
+void ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev);
 #else
 static inline void ufshpb_remove(struct ufs_hba *hba) {}
 static inline int ufshpb_probe(struct ufs_hba *hba) { return 0; }
+static inline void
+ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev) {}
 #endif
 
 #endif /* _UFSHPB_H */
-- 
2.7.4


  parent reply	other threads:[~2020-05-15 10:31 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15 10:30 [RFC PATCH 00/13] scsi: ufs: Add HPB Support Avri Altman
2020-05-15 10:30 ` [RFC PATCH 01/13] scsi: ufs: Add HPB parameters Avri Altman
2020-05-15 10:30 ` [RFC PATCH 02/13] scsi: ufshpb: Init part I - Read HPB config Avri Altman
2020-05-15 15:33   ` Randy Dunlap
2020-05-15 19:33   ` kbuild test robot
2020-05-15 19:33   ` [RFC PATCH] scsi: ufshpb: ufshpb_luns_conf can be static kbuild test robot
2020-05-16  1:46   ` [RFC PATCH 02/13] scsi: ufshpb: Init part I - Read HPB config Bart Van Assche
2020-05-16  1:57   ` Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 03/13] scsi: scsi_dh: Introduce scsi_dh_ufshpb Avri Altman
2020-05-16  1:48   ` Bart Van Assche
2020-05-16  2:16   ` kbuild test robot
2020-05-16  6:41   ` kbuild test robot
2020-05-15 10:30 ` Avri Altman [this message]
2020-05-15 20:17   ` [RFC PATCH 04/13] scsi: ufs: ufshpb: Init part II - Attach scsi device kbuild test robot
2020-05-15 20:17   ` [RFC PATCH] scsi: ufs: ufshpb: ufshpb_remove_lun() can be static kbuild test robot
2020-05-16  1:52   ` [RFC PATCH 04/13] scsi: ufs: ufshpb: Init part II - Attach scsi device Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 05/13] scsi: ufs: ufshpb: Disable HPB if no HPB-enabled luns Avri Altman
2020-05-16  2:02   ` Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 06/13] scsi: scsi_dh: ufshpb: Prepare for L2P cache management Avri Altman
2020-05-16  2:13   ` Bart Van Assche
2020-05-16  3:01   ` kbuild test robot
2020-05-16  3:01   ` kbuild test robot
2020-05-15 10:30 ` [RFC PATCH 07/13] scsi: scsi_dh: ufshpb: Add ufshpb state machine Avri Altman
2020-05-16  2:44   ` Bart Van Assche
2020-05-16  5:56   ` kbuild test robot
2020-05-16  7:38   ` kbuild test robot
2020-05-15 10:30 ` [RFC PATCH 08/13] scsi: dh: ufshpb: Activate pinned regions Avri Altman
2020-05-15 10:30 ` [RFC PATCH 09/13] scsi: ufshpb: Add response API Avri Altman
2020-05-16  3:06   ` Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 10/13] scsi: dh: ufshpb: Add ufshpb_set_params Avri Altman
2020-05-15 10:30 ` [RFC PATCH 11/13] scsi: Allow device handler set their own CDB Avri Altman
2020-05-16  3:19   ` Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 12/13] scsi: dh: ufshpb: Add prep_fn handler Avri Altman
2020-05-16  3:40   ` Bart Van Assche
2020-05-15 10:30 ` [RFC PATCH 13/13] scsi: scsi_dh: ufshpb: Add "Cold" subregions timer Avri Altman
2020-05-16  3:50 ` [RFC PATCH 00/13] scsi: ufs: Add HPB Support Bart Van Assche
2020-05-16  9:14   ` Avri Altman
2020-05-16 17:14     ` Bart Van Assche
     [not found]     ` <CGME20200516171420epcas2p108c570904c5117c3654d71e0a2842faa@epcms2p7>
2020-05-19 22:31       ` Another approach of UFSHPB yongmyung lee
2020-05-20 17:55         ` Christoph Hellwig
2020-05-20 21:19           ` Bart Van Assche
2020-05-22 16:35             ` Bart Van Assche
2020-05-22 16:49         ` Bart Van Assche
     [not found]         ` <CGME20200516171420epcas2p108c570904c5117c3654d71e0a2842faa@epcms2p4>
2020-05-25  5:40           ` Daejun Park
2020-05-25 14:56             ` Bart Van Assche
2020-05-26  6:15               ` Avri Altman
2020-05-26 17:03                 ` Bart Van Assche
     [not found]                 ` <CGME20200516171420epcas2p108c570904c5117c3654d71e0a2842faa@epcms2p3>
2020-05-27  9:11                   ` Daejun Park
2020-05-27 11:46                     ` Bean Huo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589538614-24048-5-git-send-email-avri.altman@wdc.com \
    --to=avri.altman@wdc.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avi.shchislowski@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=j-young.choi@samsung.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=md.rafiq@samsung.com \
    --cc=sangyoon.oh@samsung.com \
    --cc=stanley.chu@mediatek.com \
    --cc=ymhungry.lee@samsung.com \
    --cc=zangleigang@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.